Study guide
8.1 Data Analysis: Tables, Charts & Graphs
Saudi Arabia Qiyas GAT General Aptitude Test
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Verbal Reasoning - Analogy
1.1 Analogy Basics & Relationship Types 1.2 Advanced Word Associations & Intensity 1.3 Analogy Pacing & Elimination Strategies
2 Chapter 2: Verbal Reasoning - Sentence Completion
2.1 Context Clues & Transition Words 2.2 Dual-Blank Sentence Completions
3 Chapter 3: Verbal Reasoning - Contextual Error
3.1 Identifying Contextual Errors 3.2 Strategy for Contextual Error Detection
4 Chapter 4: Verbal Reasoning - Odd Word Out & Reading Comprehension
4.1 Odd Word Out Classification 4.2 Reading Comprehension: Literal & Direct Questions 4.3 Reading Comprehension: Critical Inference & Main Idea
5 Chapter 5: Quantitative Reasoning - Arithmetic & Numbers
5.1 Divisibility, Primes & Number Properties 5.2 Ratios, Proportions & Percentages 5.3 Rates, Joint Work & Speed Problems
6 Chapter 6: Quantitative Reasoning - Algebra & Equations
6.1 Linear Equations & Inequalities 6.2 Exponents, Roots & Algebraic Expressions 6.3 Sequences & Mathematical Patterns
7 Chapter 7: Quantitative Reasoning - Geometry
7.1 Angles, Lines & Triangles 7.2 Quadrilaterals, Polygons & Perimeter/Area 7.3 Circles & Coordinate Geometry
8 Chapter 8: Quantitative Reasoning - Data Interpretation & Comparisons
8.1 Data Analysis: Tables, Charts & Graphs 8.2 Basic Statistics & Probability 8.3 Quantitative Comparison Strategies
8.1 Data Analysis: Tables, Charts & Graphs
Key Takeaways Explain This Topic AI
Data interpretation in Qiyas GAT tests the ability to read tables, line graphs, bar charts, and pie charts under tight time constraints.
Percentage change calculations (increase/decrease) are highly common, using the formula (New Value - Old Value) / Old Value * 100.
Pay close attention to chart axes, labels, legends, and units (e.g., thousands, millions, or percentages) to avoid scale errors.
Double bar charts and overlapping line graphs require careful vertical alignment to read values correctly.
Pie chart calculations often require converting between central angles in degrees (out of 360) and percentages (out of 100).
Last updated: July 2026
8.1 Data Analysis: Tables, Charts & Graphs
Data Interpretation is a core component of the Quantitative Reasoning section in the Saudi General Aptitude Test (GAT), also known as Qudurat. This section evaluates your ability to extract, analyze, and synthesize information presented in tables, bar charts, line graphs, and pie charts. While these questions do not require advanced mathematical formulas, they test your precision, analytical speed, and critical thinking under strict time constraints. Success requires a structured approach to reading visual data, performing quick calculations, and avoiding common traps.
Navigating Different Data Formats
Each visual data format has its own structure and requires specific points of focus:
1. Data Tables
Tables present raw numbers organized in rows and columns. They offer the highest precision but can be overwhelming.
Reading Strategy : Before looking at the numbers, read the title to understand the subject. Next, study the column headers and row labels. Pay close attention to any units specified (e.g., "in thousands" or "in SAR").
Typical Task : Summing specific rows/columns, finding differences, or identifying trends across years.
2. Bar Charts
Bar charts use rectangular bars (either vertical or horizontal) to compare discrete categories. The length of each bar corresponds to its value.
Reading Strategy : Check the scales on the vertical (y) and horizontal (x) axes. Look for legends in double bar charts (which compare two groups side-by-side) or stacked bar charts (where segments are piled on top of each other).
Typical Task : Comparing values between categories, finding ratios, or calculating the total sum of multiple categories.
3. Line Graphs
Line graphs connect data points with lines to show how a variable changes, usually over time.
Reading Strategy : Read the axes carefully. Note the intervals (e.g., months, years) on the horizontal axis. In double line graphs, verify which line corresponds to which variable by looking at the legend.
Typical Task : Identifying periods of fastest growth (where the line is steepest) or predicting future values based on trends.
4. Pie Charts
Pie charts show how a whole is divided into sectors. Sectors are usually labeled as percentages (totaling 100%) or degrees (totaling 360°).
Reading Strategy : Remember that a sector's size is proportional to its value. Always look at the total value of the pie chart if given, as percentages cannot be converted to actual numbers without it.
Typical Task : Finding the value of a sector, or converting degrees to percentages and vice-versa.
Core Formulas and Calculations
GAT data interpretation questions frequently require three types of calculations:
1. Percentage Change
To find the percentage increase or decrease from an old value to a new value: Percentage Change = New Value − Old Value Old Value × 100 \text{Percentage Change} = \frac{\text{New Value} - \text{Old Value}}{\text{Old Value}} \times 100 Percentage Change = Old Value New Value − Old Value × 100
A positive result indicates growth, while a negative result represents a decline.
Worked Example: In 2022, a farm produced 250 metric tons of dates. In 2023, production increased to 300 metric tons. What was the percentage increase?
Find the absolute change: 300 − 250 = 50 300 - 250 = 50 300 − 250 = 50 tons.
Divide by the original value (2022 production): 50 250 = 1 5 = 0.20 \frac{50}{250} = \frac{1}{5} = 0.20 250 50 = 5 1 = 0.20 .
Multiply by 100 to get the percentage: 0.20 × 100 = 20 % 0.20 \times 100 = 20\% 0.20 × 100 = 20% .
2. Ratios and Fractions
Ratios compare two parts or a part to a whole. Ratio of A to B = A B \text{Ratio of A to B} = \frac{A}{B} Ratio of A to B = B A
Always simplify the fraction to its lowest terms.
Worked Example: A company employs 150 engineers and 100 managers. What is the ratio of managers to the total number of employees?
Find the total number of employees: 150 + 100 = 250 150 + 100 = 250 150 + 100 = 250 .
Form the fraction: 100 250 \frac{100}{250} 250 100 .
Simplify: 100 250 = 2 5 \frac{100}{250} = \frac{2}{5} 250 100 = 5 2 (or a ratio of 2:5).
3. Pie Chart Proportions
Converting between degrees and percentages is a common task. Use the following conversion factors:
To convert degrees to percentages: Percentage = Degrees 360 × 100 \text{Percentage} = \frac{\text{Degrees}}{360} \times 100 Percentage = 360 Degrees × 100
To convert percentages to degrees: Degrees = Percentage 100 × 360 \text{Degrees} = \frac{\text{Percentage}}{100} \times 360 Degrees = 100 Percentage × 360
Worked Example: A pie chart represents a university's enrollment by faculty. If the sector for the Faculty of Engineering has an angle of 54 ∘ 54^\circ 5 4 ∘ , what percentage of the student body does this represent?
Set up the conversion: 54 360 × 100 \frac{54}{360} \times 100 360 54 × 100 .
Simplify the fraction: 54 360 = 6 40 = 3 20 \frac{54}{360} = \frac{6}{40} = \frac{3}{20} 360 54 = 40 6 = 20 3 .
Multiply by 100: 3 20 × 100 = 15 % \frac{3}{20} \times 100 = 15\% 20 3 × 100 = 15% .
- Detailed Data Scenarios
- Scenario A: Date Palm Production (Table Analysis)
Consider the following table showing the date production (in thousands of metric tons) across four Saudi Arabian regions:
- Region 2021 2022 2023 2024
- Riyadh 120 150 180 200
- Al-Qassim 200 220 240 250
- Medina 80 100 120 130
- Eastern 60 80 90 120
Let's analyze two questions based on this data: Question 1: Which region experienced the highest percentage increase in production from 2021 to 2024?
Riyadh : 200 − 120 120 = 80 120 ≈ 66.7 % \frac{200 - 120}{120} = \frac{80}{120} \approx 66.7\% 120 200 − 120 = 120 80 ≈ 66.7%
Al-Qassim : 250 − 200 200 = 50 200 = 25 % \frac{250 - 200}{200} = \frac{50}{200} = 25\% 200 250 − 200 = 200 50 = 25%
Medina : 130 − 80 80 = 50 80 = 62.5 % \frac{130 - 80}{80} = \frac{50}{80} = 62.5\% 80 130 − 80 = 80 50 = 62.5%
Eastern : 120 − 60 60 = 60 60 = 100 % \frac{120 - 60}{60} = \frac{60}{60} = 100\% 60 120 − 60 = 60 60 = 100% Analysis : The Eastern region had the highest percentage increase (100%), even though its absolute increase (60 thousand tons) was less than Riyadh's absolute increase (80 thousand tons).
Question 2: What percentage of the total production in 2023 was contributed by Al-Qassim?
Find the total production in 2023: 180 + 240 + 120 + 90 = 630 180 + 240 + 120 + 90 = 630 180 + 240 + 120 + 90 = 630 thousand tons.
Al-Qassim's production in 2023 was 240 thousand tons.
Calculate the percentage: 240 630 × 100 ≈ 38.1 % \frac{240}{630} \times 100 \approx 38.1\% 630 240 × 100 ≈ 38.1% .
Scenario B: Government Budget Allocation (Pie Chart Analysis)
Suppose a pie chart shows the municipal budget of a city, totaling 12 million SAR. The sector for "Public Parks" has an angle of 45 ∘ 45^\circ 4 5 ∘ . Question: How much money is allocated to Public Parks?
Determine the fraction of the budget: 45 ∘ 360 ∘ = 1 8 \frac{45^\circ}{360^\circ} = \frac{1}{8} 36 0 ∘ 4 5 ∘ = 8 1 .
Calculate the monetary value: 1 8 × 12 , 000 , 000 SAR = 1 , 500 , 000 SAR \frac{1}{8} \times 12,000,000\text{ SAR} = 1,500,000\text{ SAR} 8 1 × 12 , 000 , 000 SAR = 1 , 500 , 000 SAR .
- GAT Traps and Test-Taking Strategies
- 1. The Scale/Unit Trap
Always check the labels on the axes or in the column headers. A common trick is to write numbers like 5, 10, 15 on the y-axis, but a small label at the top reads "in thousands." Failing to account for the unit will lead to choosing a trap option.
2. Percentage vs. Absolute Amount Trap
A larger percentage does not automatically mean a larger quantity. If School A has 10% of its students in the chess club and School B has 5% of its students in the chess club, School A does not necessarily have more chess players. If School A has 100 students (10 players) and School B has 1,000 students (50 players), School B has far more players. You must know the total population size to compare absolute numbers.
3. Visual Extrapolation Trap
GAT diagrams can sometimes be visually misleading. Do not estimate values by looking at the heights of bars or lines unless the exact figures are not provided. Always rely on the written numbers first. If you must estimate, use the gridlines as a guide rather than guessing.
4. Estimation Shortcut (Rounding)
Under time constraints, round numbers to make calculation faster. For example, if you need to calculate 297 602 \frac{297}{602} 602 297 , round it to 300 600 = 50 % \frac{300}{600} = 50\% 600 300 = 50% . The correct answer choice will be the one closest to your estimate.