Study guide

7.3 Articulators, Facebow Transfers & Occlusal Splints

Saudi Dental Licensure Examination SDLE / SPLE - Dentist

Track your progress as you read

Finished sections get a check mark.

1 Introduction

About the SDLE: Format, Scoring, Eligibility, Attempts & Blueprint

2 Chapter 1: Operative Dentistry & Caries Management

1.1 Caries Etiology, Histopathology, and Risk Assessment (CAMBRA / ICDAS) 1.2 Cavity Preparation Principles and Tooth Isolation (Rubber Dam Mechanics) 1.3 Direct Composite Resin Restorations, Adhesion & Curing Dynamics 1.4 Indirect Inlays and Onlays, Minimally Invasive Restorations, Finishing and Repair

3 Chapter 2: Direct Restorations & Dental Biomaterials

2.1 Dental Amalgam Restorations, Matrix Systems & Proximal Contact Mechanics 2.2 Glass Ionomer Cements, Resin-Modified Glass Ionomers & Bioactive Materials 2.3 Dental Bonding Agents (Etch-and-Rinse vs. Self-Etch vs. Universal Systems) 2.4 Direct Pulp Capping, Indirect Pulp Capping & Pulpal Protection Liners

4 Chapter 3: Fixed Prosthodontics — Treatment Planning & Tooth Preparation

3.1 Fixed Partial Denture Treatment Planning: Abutments, Pontics and Endodontically Treated Teeth 3.2 Biological, Mechanical, and Esthetic Principles of Crown Preparations 3.3 Finish Lines and Margin Geometries (Chamfer, Shoulder, Feather-Edge) 3.4 Temporary/Provisional Restorations & Tissue Management (Gingival Retraction) 3.5 Impression Techniques, Digital Scanning & Working Casts

5 Chapter 4: Fixed Prosthodontics — Materials, Luting, Esthetics & Delivery

4.1 Dental Ceramics (Feldspathic, Lithium Disilicate, Zirconia) & Metal-Ceramics 4.2 Dental Cements and Luting Protocols (Zinc Phosphate, GI, RMGI, Resin) 4.3 Shade Selection, Color Science, and Esthetic Veneers 4.4 Fixed Prosthesis Try-In, Delivery, Complications and Repair

6 Chapter 5: Removable Partial Dentures

5.1 Removable Partial Dentures: Kennedy Classification, Rests, and Major Connectors 5.2 RPD Direct Retainers, Indirect Retainers & Surveying Principles 5.3 RPD Design Sequence, Mouth Preparation, Impressions, Try-In, Delivery and Maintenance

7 Chapter 6: Complete Dentures

6.1 Complete Denture Anatomy, Border Molding & Secondary Impressions 6.2 Maxillomandibular Relationships, Vertical Dimension & Occlusion Schemes 6.3 Complete Denture Diagnosis, Try-In, Insertion, Post-Insertion Problems and Relining

8 Chapter 7: Dental Anatomy, Occlusion & Articulators

7.1 Dental Anatomy: Tooth Notation, Permanent Tooth Morphology and Identification 7.2 Principles of Occlusion (Centric Relation, MIC, Canine Guidance, Group Function) 7.3 Articulators, Facebow Transfers & Occlusal Splints

9 Chapter 8: Basic Implantology

8.1 Basic Implantology: Patient Assessment, Treatment Planning and Implant Positioning 8.2 Implant Prosthodontics: Biomechanics, Abutment Types & Loading Protocols

10 Chapter 9: Ethics, Professionalism, Infection Control & Patient Safety

9.1 Ethics, Professionalism and Saudi Health Practice Law 9.2 Infection Control and Patient Safety in the Dental Clinic

11 Chapter 10: Periodontal Anatomy, Classification, Etiology & Pathology

10.1 Anatomy of the Periodontium and Biologic Width 10.2 2017 AAP/EFP World Workshop Classification (Staging and Grading) 10.3 Periodontal Microbiology, Host Response & Systemic Risk Factors 10.4 Applied Periodontal Pathology: Lesion Stages, Necrotizing Disease, Abscesses and Gingival Enlargement

12 Chapter 11: Periodontal Examination & Non-Surgical Therapy

11.1 Clinical Periodontal Assessment, Probing, Mobility & Furcation Involvement 11.2 Scaling and Root Planing, Ultrasonic Instrumentation & Full-Mouth Disinfection 11.3 Antimicrobial Therapy, Host Modulation & Periodontal Maintenance

13 Chapter 12: Surgical Periodontics, Peri-Implant Disease & Multidisciplinary Care

12.1 Periodontal Flap Surgery & Resective Osseous Surgery 12.2 Regenerative Periodontal Therapy (GTR, Bone Grafts, Enamel Matrix Derivatives) 12.3 Mucogingival Deformities, Soft Tissue Grafting & Peri-Implant Diseases (Mucositis vs. Peri-Implantitis) 12.4 Iatrogenic Factors, Occlusal Trauma and Multidisciplinary Periodontal Care

14 Chapter 13: Pulpal & Periapical Pathology, Diagnosis & Endodontic Treatment Planning

13.1 Pulpal Biology, Pathogenesis, and Diagnostic Terminology (AAE Classification) 13.2 Diagnostic Testing Modalities (Thermal, Electric, Percussion, Palpation, CBCT) 13.3 Endodontic Treatment Planning, Case Difficulty, Retreatment, Apical Surgery and Outcomes

15 Chapter 14: Endodontic Treatment: Anatomy, Access, Shaping & Irrigation

14.1 Internal Tooth Anatomy and Endodontic Access Cavity Preparation 14.2 Root Canal Instrumentation: Hand, Rotary, and Reciprocating Nickel-Titanium 14.3 Endodontic Irrigants (NaOCl, EDTA, CHX), Intracanal Medicaments & Smear Layer

16 Chapter 15: Obturation, Mishaps, Emergencies, Trauma & Endo-Perio Lesions

15.1 Root Canal Obturation Techniques (Cold Lateral, Warm Vertical, Bioceramic Sealers) 15.2 Management of Procedural Accidents (Ledges, Perforations, Separated Instruments) 15.3 Endodontic Emergencies, Flare-ups & Traumatic Dental Injuries (Luxations, Avulsion) 15.4 Endodontic-Periodontal Lesions, Cracked Teeth and Vertical Root Fractures

17 Chapter 16: Local Anesthesia, Surgical Principles, Biopsy & Exodontia

16.1 Local Anesthetics, Vasoconstrictors, Dosages & Nerve Block Techniques 16.2 Principles of Oral Surgery, Suturing, Wound Healing and Biopsy Techniques 16.3 Exodontia Principles, Surgical Extraction & Management of Impacted Third Molars 16.4 Post-Extraction Complications (Alveolar Osteitis, Hemorrhage, Oroantral Fistula)

18 Chapter 17: Odontogenic Infections, Maxillofacial Trauma & Dentofacial Deformities

17.1 Odontogenic Infections, Fascial Space Spread & Ludwig's Angina 17.2 Maxillofacial Trauma and Dentofacial Deformities

19 Chapter 18: Medical Emergencies & Medically Compromised Patients

18.1 Dental Office Medical Emergencies (Syncope, Anaphylaxis, Angina, Hypoglycemia) 18.2 Management of Medically Compromised Dental Patients (Cardiovascular, Anticoagulated, Diabetic) 18.3 Dental Management of Hematologic and Oncology Patients 18.4 Endocrine, Hepatic, Renal, Pulmonary, Neurological and Psychiatric Conditions in Dental Practice

20 Chapter 19: Oral Mucosal, Infectious, Immunologic & Salivary Gland Pathology

19.1 Benign and Malignant Oral Mucosal Lesions (Leukoplakia, Lichen Planus, OSCC) 19.2 Microbiological Infections of the Oral Mucosa: Fungal, Viral and Bacterial 19.3 Immunologic and Allergic Conditions, Reactive Lesions and Physical or Chemical Injuries 19.4 Salivary Gland Diseases: Obstruction, Infection, Sjögren Syndrome and Tumors

21 Chapter 20: Jaw Pathology & Abnormalities of Teeth

20.1 Odontogenic Cysts and Tumors (Radicular Cyst, Dentigerous Cyst, OKCs, Ameloblastoma) 20.2 Bone Pathology of the Jaws: Fibro-Osseous Lesions, Giant Cell Lesions, Osteomyelitis and Malignancy 20.3 Abnormalities of Teeth and Developmental Defects of the Oral Region

22 Chapter 21: Orofacial Pain, TMD & Neuromuscular Disorders

21.1 Differential Diagnosis of Odontogenic vs. Non-Odontogenic Orofacial Pain 21.2 Temporomandibular Disorders and Neuromuscular Conditions

23 Chapter 22: Orthodontic Growth, Diagnosis & Treatment Planning

22.1 Craniofacial Growth, Development & Angle's Malocclusion Classification 22.2 Cephalometric Landmarks, Analysis & Biology of Orthodontic Tooth Movement 22.3 Etiology of Malocclusion, Orthodontic Diagnosis and Treatment Planning

24 Chapter 23: Orthodontic Treatment: Interceptive, Skeletal, Canines & Fixed Appliances

23.1 Interceptive Orthodontics, Serial Extraction & Space Maintainers (Band and Loop, Nance, Lingual Arch) 23.2 Management of Class I, Class II, Class III and Skeletal Problems 23.3 Ectopic and Impacted Maxillary Canines 23.4 Fixed Appliances, Anchorage, Adult Orthodontics and Retention

25 Chapter 24: Pediatric Dentistry: Development, Behavior, Caries & Restorative Care

24.1 Dental Development, Eruption Chronology and Examination of the Child 24.2 Pediatric Behavior Guidance, Nitrous Oxide & Early Childhood Caries (ECC) 24.3 Pediatric Caries Prevention and Restorative Dentistry: Sealants, ART, Crowns and Material Choice

26 Chapter 25: Pediatric Pulp Therapy, Pain Management, Oral Surgery, Trauma & Child Protection

25.1 Pediatric Pulp Therapy (Pulpotomy vs. Pulpectomy) and Stainless Steel Crowns 25.2 Pediatric Local Anesthesia, Pain Management and Pediatric Oral Surgery 25.3 Traumatic Injuries to the Primary Dentition and Recognition of Child Abuse and Neglect

7.3 Articulators, Facebow Transfers & Occlusal Splints

Key Takeaways Explain This Topic AI

Articulators are categorized into Classes I through IV based on adjustability; Class III semi-adjustable instruments are divided into Arcon (anatomical: condylar sphere on lower member) and Non-arcon (condylar slot on lower member).

Arcon articulators maintain a constant condylar inclination angle relative to the maxillary occlusal plane regardless of changes in vertical dimension of occlusion, preventing false occlusal errors when using an incisal pin.

A facebow records the spatial relationship of the maxillary arch to the transverse horizontal axis (terminal hinge axis) and an anterior reference plane (Orbitale/Campers), transferring this orientation to the articulator.

The stabilization splint (Michigan splint) is a flat-plane, hard acrylic full-coverage appliance in Centric Relation with canine guidance, considered the gold standard for nocturnal bruxism and muscular TMD.

Anterior repositioning splints are indicated only for short-term management (≤6–12 weeks) of disc displacement with reduction with painful clicking, as prolonged wear risks irreversible posterior open bite.

Last updated: October 2026

Simulating dynamic mandibular movements outside the patient's oral cavity is fundamental to prosthodontic success. An articulator serves as a mechanical analog of the temporomandibular joints and dental arches. Understanding articulator mechanics, facebow transfer orientations, and therapeutic occlusal splint designs is essential for the Saudi Dental Licensure Examination (SDLE).

Classification of Articulators

Articulators are classified based on their adjustability and kinematic simulation capabilities according to the International Prosthodontic Classification (Classes I to IV):

1. Class I: Simple Hinge Articulators (Non-Adjustable)

Mechanics: Capable of only a single, simple opening and closing hinge movement along a fixed axis.

Deficiencies: The distance between the hinge axis and the incisal edge is significantly shorter than in the human skull. This creates an abnormally steep radius and arc of closure, resulting in premature contacts on posterior cuspal inclines and inaccurate restoration occlusal anatomy.

Clinical Scope: Limited to simple single-unit provisional restorations or diagnostic preliminary waxings.

2. Class II: Arbitrary Non-Adjustable Articulators (Mean-Value)

Mechanics: Permit horizontal, lateral, and protrusive excursions, but all pathways are set to fixed arbitrary population averages (typically 30° horizontal condylar inclination , 110 mm intercondylar distance , and a fixed 15° Bennett angle ).

Deficiencies: Cannot accept a facebow transfer; cannot accept eccentric interocclusal records (checkbites). Lateral movements do not reproduce the patient's individual condylar paths.

3. Class III: Semi-Adjustable Articulators (The Workhorse of Restorative Dentistry)

Mechanics: Replicate mandibular movements with high clinical accuracy by accepting three primary diagnostic records:

Facebow Transfer: Transposes the 3D spatial position of the maxilla relative to the hinge axis.

Protrusive Checkbite: Calibrates the horizontal condylar guidance angle ( H C I HCI H C I ).

Lateral Checkbites (or Hanau's Formula): Calibrates the Bennett angle ( L = H 8 + 12 L = \frac{H}{8} + 12 L = 8 H ​ + 12 , where H H H is horizontal condylar inclination).

Subdivisions: Arcon vs. Non-Arcon (discussed in detail below).

4. Class IV: Fully Adjustable Articulators

Mechanics: Capable of total customized tracking of the entire envelope of mandibular motion.

Diagnostic Requirements: Requires a kinematic facebow to locate the exact terminal hinge axis, combined with pantographic tracings or electronic 3D computerized axiography.

Adjustable Parameters: Curvature of condylar paths, individualized intercondylar distance, Fischer's angle, and Immediate Mandibular Lateral Translation (IMLT / immediate side shift) along with progressive side shift.

Arcon vs. Non-Arcon Articulators: Kinematics & Error Propagation

The fundamental mechanical distinction between Arcon and Non-Arcon instruments lies in the anatomical location of the condylar elements: ARCON vs. NON-ARCON ARCHITECTURE

  • [ARCON ARTICULATOR] [NON-ARCON ARTICULATOR]
  • Upper Member: Fossa / Guidance Track Upper Member: Condylar Sphere
  • Lower Member: Condylar Sphere Lower Member: Condylar Slot / Track
  • (Mimics Human Anatomy) (Reverse Mechanical Inversion)
  • 1. Arcon Design (ARticulator + CONdyle)

Anatomy: The condylar spheres are attached to the lower member , and the condylar guides (mechanical fossae) are attached to the upper member —directly mirroring human cranial anatomy.

Kinematic Stability during Vertical Changes: When the vertical dimension is opened or closed on the articulator (via the incisal pin), the upper member rotates around the condylar sphere. Because the guide track is fixed to the moving upper member, the angle between the condylar track and the maxillary occlusal plane remains completely constant .

Clinical Advantage: Highly accurate when altering vertical dimension or evaluating restorative waxings at varying pin openings. The upper member easily lifts off for direct wax carving.

2. Non-Arcon Design

Anatomy: The mechanical relationship is inverted: the condylar spheres are fixed to the upper member , while the condylar track/slot is fixed to the lower member .

Error Propagation during Vertical Changes: Because the condylar guide slot is fixed to the lower member, when the upper member rotates open, the relationship between the condylar path and the maxillary occlusal plane drastically changes . Opening the pin alters the effective condylar inclination, introducing substantial occlusal errors in cuspal inclines on the fabricated restorations.

Detailed Mechanical Comparison

Feature / Parameter Arcon Articulator (e.g., Whip Mix, Hanau Wide-Vue) Non-Arcon Articulator (e.g., Hanau H2, Dentatus)

  • Condylar Sphere Location Lower member (anatomical) Upper member (inverted)
  • Condylar Guide / Fossa Location Upper member (anatomical) Lower member (inverted)

Maxillary-Condylar Angle on Pin Opening Remains constant across all vertical changes Changes dynamically , creating occlusal cuspal error

Member Disassembly Upper member lifts off freely for wax manipulation Rigidly linked; difficult to separate without unscrewing

Primary Clinical Application Fixed prosthodontics, natural dentition, full-mouth rehab Complete removable denture prosthodontics

Facebow Transfers: Kinematic vs. Arbitrary

A facebow is a caliper-like diagnostic device used to record the spatial relationship of the maxillary dental arch to the transverse horizontal axis of rotation (terminal hinge axis) and to a selected anterior reference plane, subsequently transferring this orientation to the articulator. AXIS-ORBITALE REFERENCE PLANE

  • Posterior Reference Anterior Reference
  • [Terminal Hinge Axis] --------------> [Orbitale / Nasion]
  • (Ear-bow) (Pointer)
  • \ /
  • \=== Maxillary Cast Orientation ==/
  • 1. The Terminal Hinge Axis (THA)

The imaginary transverse horizontal axis running through both condyles when they are in their most anterior-superior position in the glenoid fossae (CR).

Along this axis, the mandible is capable of executing pure rotational movement without translation, corresponding clinically to an incisal separation of 20 to 25 mm .

2. Arbitrary (Ear-Bow) Facebow

Mechanism: Relies on standardized anatomical averages. Earplugs are inserted into the external auditory meatus (EAM). Because the true terminal hinge axis is located within 5 mm of the center of the external auditory meatus in >95% of patients, this anatomical approximation is clinically satisfactory for almost all routine restorative procedures.

Anterior Reference Points:

Orbitale: Defines the Frankfurt Horizontal Plane (Porion to Orbitale).

Nasion: Uses a nasion relator.

43 mm Point: Marked 43 mm superior to the incisal edge of a maxillary incisor (the Whip Mix arbitrary anterior reference), approximating the axis-orbital (Frankfort) plane.

3. Kinematic Facebow

Mechanism: Employs a mandibular clutch attached to the teeth and adjustable outer caliper arms positioned over the TMJs. As the patient executes pure rotational opening/closing, the clinician adjusts the stylus until it rotates purely on a single point without arcing.

Indication: Locates the true physiological terminal hinge axis . Mandatory in Class IV articulators, full-mouth reconstructive rehabilitation, and cases where the vertical dimension of occlusion is planned to be altered on the articulator by more than 2–3 mm.

Important

If an arbitrary facebow is used, any alteration of the vertical dimension of occlusion (VDO) on the articulator using the incisal pin will introduce an arc-of-closure discrepancy between the articulator and the patient. In such cases, interocclusal records must be taken at the exact proposed vertical dimension of occlusion .

Therapeutic Occlusal Splints (Appliances)

Occlusal splints are removable intraoral appliances fabricated from hard acrylic resin that alter the patient's occlusal contacts to protect teeth, deprogram muscles, or reposition the condyle-disc assembly.

1. Stabilization Splint (Michigan Splint / Flat Plane Hard Appliance)

Design & Features:

Fabricated from rigid, heat-cured clear polymethyl methacrylate (PMMA) . Full-arch coverage (typically maxillary arch, though mandibular appliances are equally effective).

Occlusal Schema: Perfectly flat occlusal surface. Opposing functional cusp tips (mandibular buccal cusps and incisal edges) contact simultaneously with uniform, light point contacts in Centric Relation .

Canine Guidance: Features smooth canine guidance ramps that immediately disocclude all posterior teeth during lateral and protrusive excursions.

Mechanism of Action:

Eliminates all posterior occlusal interferences, allowing the condyles to seat in Centric Relation.

Deprograms hyperactive elevator musculature (masseter, temporalis), breaking the pain-spasm cycle.

Significantly reduces nocturnal bruxism forces and protects teeth and restorations from severe mechanical wear.

Primary Indications: Nocturnal bruxism, masticatory muscle myalgia/myofascial pain, and TMJ disc displacement without reduction (closed lock) to relieve joint capsule pressure.

2. Anterior Repositioning Splint (ARS)

Design & Features: Full-arch appliance featuring anterior guidance ramps or indentations that guide and hold the mandible forward in a protrusive position .

Therapeutic Objective: In patients with disc displacement with reduction , the condyle is maintained anteriorly on the intermediate zone of the articular disc, temporarily preventing posterior disc displacement and eliminating reciprocal clicking.

Mandatory Usage Constraints:

Must be worn strictly on a temporary basis (part-time wear, or full-time for no longer than 6 to 12 weeks ).

Iatrogenic Complications of Prolonged Wear:

Permanent contracture and shortening of the inferior lateral pterygoid muscle.

Bilateral condylar remodeling.

Irreversible posterior open bite requiring extensive orthodontics or full-mouth reconstructive surgery to restore posterior contact.

3. Anterior Bite Plane (Hawley Bite Plane / NTI-tss Appliance)

Design & Features: Covers only the anterior maxillary or mandibular teeth, providing an anterior contact ledge that completely separates all posterior premolars and molars.

Mechanism: By eliminating all posterior contacts, it abolishes posterior PDL mechanoreceptive feedback, producing profound neuro-reflexive inhibition of the temporalis and masseter muscles.

Severe Contraindication / Danger: Full-time wear (>2 to 4 weeks) causes rapid supraeruption of unapposed posterior teeth and intrusion of anterior teeth, producing an intractable iatrogenic anterior open bite.

4. Soft Resilient Splints (Vacuum-Formed Vinyl)

Fabricated from soft polyvinyl acetate-polyethylene materials.

Contraindicated in Chronic Bruxers: The spongy, resilient surface stimulates chewing and clenching reflexes, frequently exacerbating masseter hypertrophy and muscular pain.

Loading diagram... Clinical Algorithm for Occlusal Splint Selection and Management