Study guide
2.2 Glass Ionomer Cements, Resin-Modified Glass Ionomers & Bioactive Materials
Saudi Dental Licensure Examination SDLE / SPLE - Dentist
Track your progress as you read
Finished sections get a check mark.
1 Introduction
About the SDLE: Format, Scoring, Eligibility, Attempts & Blueprint
2 Chapter 1: Operative Dentistry & Caries Management
1.1 Caries Etiology, Histopathology, and Risk Assessment (CAMBRA / ICDAS) 1.2 Cavity Preparation Principles and Tooth Isolation (Rubber Dam Mechanics) 1.3 Direct Composite Resin Restorations, Adhesion & Curing Dynamics 1.4 Indirect Inlays and Onlays, Minimally Invasive Restorations, Finishing and Repair
3 Chapter 2: Direct Restorations & Dental Biomaterials
2.1 Dental Amalgam Restorations, Matrix Systems & Proximal Contact Mechanics 2.2 Glass Ionomer Cements, Resin-Modified Glass Ionomers & Bioactive Materials 2.3 Dental Bonding Agents (Etch-and-Rinse vs. Self-Etch vs. Universal Systems) 2.4 Direct Pulp Capping, Indirect Pulp Capping & Pulpal Protection Liners
4 Chapter 3: Fixed Prosthodontics — Treatment Planning & Tooth Preparation
3.1 Fixed Partial Denture Treatment Planning: Abutments, Pontics and Endodontically Treated Teeth 3.2 Biological, Mechanical, and Esthetic Principles of Crown Preparations 3.3 Finish Lines and Margin Geometries (Chamfer, Shoulder, Feather-Edge) 3.4 Temporary/Provisional Restorations & Tissue Management (Gingival Retraction) 3.5 Impression Techniques, Digital Scanning & Working Casts
5 Chapter 4: Fixed Prosthodontics — Materials, Luting, Esthetics & Delivery
4.1 Dental Ceramics (Feldspathic, Lithium Disilicate, Zirconia) & Metal-Ceramics 4.2 Dental Cements and Luting Protocols (Zinc Phosphate, GI, RMGI, Resin) 4.3 Shade Selection, Color Science, and Esthetic Veneers 4.4 Fixed Prosthesis Try-In, Delivery, Complications and Repair
6 Chapter 5: Removable Partial Dentures
5.1 Removable Partial Dentures: Kennedy Classification, Rests, and Major Connectors 5.2 RPD Direct Retainers, Indirect Retainers & Surveying Principles 5.3 RPD Design Sequence, Mouth Preparation, Impressions, Try-In, Delivery and Maintenance
7 Chapter 6: Complete Dentures
6.1 Complete Denture Anatomy, Border Molding & Secondary Impressions 6.2 Maxillomandibular Relationships, Vertical Dimension & Occlusion Schemes 6.3 Complete Denture Diagnosis, Try-In, Insertion, Post-Insertion Problems and Relining
8 Chapter 7: Dental Anatomy, Occlusion & Articulators
7.1 Dental Anatomy: Tooth Notation, Permanent Tooth Morphology and Identification 7.2 Principles of Occlusion (Centric Relation, MIC, Canine Guidance, Group Function) 7.3 Articulators, Facebow Transfers & Occlusal Splints
9 Chapter 8: Basic Implantology
8.1 Basic Implantology: Patient Assessment, Treatment Planning and Implant Positioning 8.2 Implant Prosthodontics: Biomechanics, Abutment Types & Loading Protocols
10 Chapter 9: Ethics, Professionalism, Infection Control & Patient Safety
9.1 Ethics, Professionalism and Saudi Health Practice Law 9.2 Infection Control and Patient Safety in the Dental Clinic
11 Chapter 10: Periodontal Anatomy, Classification, Etiology & Pathology
10.1 Anatomy of the Periodontium and Biologic Width 10.2 2017 AAP/EFP World Workshop Classification (Staging and Grading) 10.3 Periodontal Microbiology, Host Response & Systemic Risk Factors 10.4 Applied Periodontal Pathology: Lesion Stages, Necrotizing Disease, Abscesses and Gingival Enlargement
12 Chapter 11: Periodontal Examination & Non-Surgical Therapy
11.1 Clinical Periodontal Assessment, Probing, Mobility & Furcation Involvement 11.2 Scaling and Root Planing, Ultrasonic Instrumentation & Full-Mouth Disinfection 11.3 Antimicrobial Therapy, Host Modulation & Periodontal Maintenance
13 Chapter 12: Surgical Periodontics, Peri-Implant Disease & Multidisciplinary Care
12.1 Periodontal Flap Surgery & Resective Osseous Surgery 12.2 Regenerative Periodontal Therapy (GTR, Bone Grafts, Enamel Matrix Derivatives) 12.3 Mucogingival Deformities, Soft Tissue Grafting & Peri-Implant Diseases (Mucositis vs. Peri-Implantitis) 12.4 Iatrogenic Factors, Occlusal Trauma and Multidisciplinary Periodontal Care
14 Chapter 13: Pulpal & Periapical Pathology, Diagnosis & Endodontic Treatment Planning
13.1 Pulpal Biology, Pathogenesis, and Diagnostic Terminology (AAE Classification) 13.2 Diagnostic Testing Modalities (Thermal, Electric, Percussion, Palpation, CBCT) 13.3 Endodontic Treatment Planning, Case Difficulty, Retreatment, Apical Surgery and Outcomes
15 Chapter 14: Endodontic Treatment: Anatomy, Access, Shaping & Irrigation
14.1 Internal Tooth Anatomy and Endodontic Access Cavity Preparation 14.2 Root Canal Instrumentation: Hand, Rotary, and Reciprocating Nickel-Titanium 14.3 Endodontic Irrigants (NaOCl, EDTA, CHX), Intracanal Medicaments & Smear Layer
16 Chapter 15: Obturation, Mishaps, Emergencies, Trauma & Endo-Perio Lesions
15.1 Root Canal Obturation Techniques (Cold Lateral, Warm Vertical, Bioceramic Sealers) 15.2 Management of Procedural Accidents (Ledges, Perforations, Separated Instruments) 15.3 Endodontic Emergencies, Flare-ups & Traumatic Dental Injuries (Luxations, Avulsion) 15.4 Endodontic-Periodontal Lesions, Cracked Teeth and Vertical Root Fractures
17 Chapter 16: Local Anesthesia, Surgical Principles, Biopsy & Exodontia
16.1 Local Anesthetics, Vasoconstrictors, Dosages & Nerve Block Techniques 16.2 Principles of Oral Surgery, Suturing, Wound Healing and Biopsy Techniques 16.3 Exodontia Principles, Surgical Extraction & Management of Impacted Third Molars 16.4 Post-Extraction Complications (Alveolar Osteitis, Hemorrhage, Oroantral Fistula)
18 Chapter 17: Odontogenic Infections, Maxillofacial Trauma & Dentofacial Deformities
17.1 Odontogenic Infections, Fascial Space Spread & Ludwig's Angina 17.2 Maxillofacial Trauma and Dentofacial Deformities
19 Chapter 18: Medical Emergencies & Medically Compromised Patients
18.1 Dental Office Medical Emergencies (Syncope, Anaphylaxis, Angina, Hypoglycemia) 18.2 Management of Medically Compromised Dental Patients (Cardiovascular, Anticoagulated, Diabetic) 18.3 Dental Management of Hematologic and Oncology Patients 18.4 Endocrine, Hepatic, Renal, Pulmonary, Neurological and Psychiatric Conditions in Dental Practice
20 Chapter 19: Oral Mucosal, Infectious, Immunologic & Salivary Gland Pathology
19.1 Benign and Malignant Oral Mucosal Lesions (Leukoplakia, Lichen Planus, OSCC) 19.2 Microbiological Infections of the Oral Mucosa: Fungal, Viral and Bacterial 19.3 Immunologic and Allergic Conditions, Reactive Lesions and Physical or Chemical Injuries 19.4 Salivary Gland Diseases: Obstruction, Infection, Sjögren Syndrome and Tumors
21 Chapter 20: Jaw Pathology & Abnormalities of Teeth
20.1 Odontogenic Cysts and Tumors (Radicular Cyst, Dentigerous Cyst, OKCs, Ameloblastoma) 20.2 Bone Pathology of the Jaws: Fibro-Osseous Lesions, Giant Cell Lesions, Osteomyelitis and Malignancy 20.3 Abnormalities of Teeth and Developmental Defects of the Oral Region
22 Chapter 21: Orofacial Pain, TMD & Neuromuscular Disorders
21.1 Differential Diagnosis of Odontogenic vs. Non-Odontogenic Orofacial Pain 21.2 Temporomandibular Disorders and Neuromuscular Conditions
23 Chapter 22: Orthodontic Growth, Diagnosis & Treatment Planning
22.1 Craniofacial Growth, Development & Angle's Malocclusion Classification 22.2 Cephalometric Landmarks, Analysis & Biology of Orthodontic Tooth Movement 22.3 Etiology of Malocclusion, Orthodontic Diagnosis and Treatment Planning
24 Chapter 23: Orthodontic Treatment: Interceptive, Skeletal, Canines & Fixed Appliances
23.1 Interceptive Orthodontics, Serial Extraction & Space Maintainers (Band and Loop, Nance, Lingual Arch) 23.2 Management of Class I, Class II, Class III and Skeletal Problems 23.3 Ectopic and Impacted Maxillary Canines 23.4 Fixed Appliances, Anchorage, Adult Orthodontics and Retention
25 Chapter 24: Pediatric Dentistry: Development, Behavior, Caries & Restorative Care
24.1 Dental Development, Eruption Chronology and Examination of the Child 24.2 Pediatric Behavior Guidance, Nitrous Oxide & Early Childhood Caries (ECC) 24.3 Pediatric Caries Prevention and Restorative Dentistry: Sealants, ART, Crowns and Material Choice
26 Chapter 25: Pediatric Pulp Therapy, Pain Management, Oral Surgery, Trauma & Child Protection
25.1 Pediatric Pulp Therapy (Pulpotomy vs. Pulpectomy) and Stainless Steel Crowns 25.2 Pediatric Local Anesthesia, Pain Management and Pediatric Oral Surgery 25.3 Traumatic Injuries to the Primary Dentition and Recognition of Child Abuse and Neglect
2.2 Glass Ionomer Cements, Resin-Modified Glass Ionomers & Bioactive Materials
Key Takeaways Explain This Topic AI
The setting reaction of conventional glass ionomer cements (GIC) proceeds through three distinct stages: dissolution (acid attack releasing Ca²⁺, Al³⁺, and F⁻), gelation (initial calcium polyacrylate cross-linking), and hardening (slow aluminum polyacrylate network maturation over 24 hours).
GICs adhere chemically to tooth mineral through ionic chelation between the carboxylate groups (-COO⁻) of polyacrylic acid and calcium ions in hydroxyapatite, creating an acid-resistant ion-exchange layer.
The coefficient of thermal expansion of conventional GIC closely matches natural human dentin (10-11 × 10⁻⁶/°C), minimizing thermal microleakage and marginal stress.
Resin-modified glass ionomers (RMGI) combine acid-base reaction chemistry with free-radical polymerization of HEMA, significantly improving early fracture toughness and moisture resistance while retaining fluoride release.
Tricalcium silicate bioceramics (MTA and Biodentine) induce reparative dentin bridge formation by maintaining an alkaline microenvironment (pH ~12.5), releasing calcium ions, and stimulating odontoblast-like cell differentiation via TGF-β1 expression.
Last updated: October 2026
Bioactive materials represent a dynamic class of dental biomaterials that elicit a specific biological response at the interface between the restoration and host tissue. Rather than serving as passive space-fillers, these materials release therapeutic ions, chemically bond to tooth structure, and promote tissue remineralization or hard-tissue bridge formation.
Conventional Glass Ionomer Cements (GIC)
Conventional glass ionomer cements (GIC), introduced by Wilson and Kent in 1972, are generic acid-base cements formed by reacting an ion-leachable fluoroaluminosilicate glass powder with an aqueous polyalkenoic acid liquid.
1. Chemical Composition
Powder: Calcium fluoroaluminosilicate glass ( S i O 2 − A l 2 O 3 − C a F 2 − A l F 3 − N a 3 A l F 6 SiO_2-Al_2O_3-CaF_2-AlF_3-Na_3AlF_6 S i O 2 − A l 2 O 3 − C a F 2 − A l F 3 − N a 3 A l F 6 ). Silica ( S i O 2 SiO_2 S i O 2 ) and alumina ( A l 2 O 3 Al_2O_3 A l 2 O 3 ) form the cross-linked oxide glass framework. Fluoride ( C a F 2 CaF_2 C a F 2 ) acts as a ceramic flux to lower melting temperature and provides the therapeutic source of leachable fluoride.
Liquid: An aqueous solution of 40–50% polyacrylic acid or a copolymer of acrylic acid with itaconic, maleic, or tricarboxylic acids. Copolymerization prevents premature hydrogen bonding and gelation during shelf life, reducing liquid viscosity. Tartaric acid (5–10%) is added as an optical isomer accelerator to sharpen the setting transition without shortening manipulation time.
2. The Acid-Base Setting Cascade: Three Stages
The setting reaction of GIC is a continuous acid-base neutralization cascade occurring in three distinct, time-dependent phases:
Stage 1: Dissolution (Acid Attack): Upon mixing, ionized polyacrylic acid releases hydronium ions ( H 3 O + H_3O^+ H 3 O + ). Protons attack the outer layer of the glass particles, extracting calcium ( C a 2 + Ca^{2+} C a 2 + ), aluminum ( A l 3 + Al^{3+} A l 3 + ), fluoride ( F − F^- F − ), and sodium ( N a + Na^+ N a + ) ions into the aqueous matrix. A hydrated silica gel layer forms on the surface of the decomposing glass particles.
Stage 2: Gelation / Precipitation (Initial Set, 4 to 10 Minutes): Divalent calcium ions ( C a 2 + Ca^{2+} C a 2 + ) migrate more rapidly than trivalent aluminum ions. Within 4 to 10 minutes, C a 2 + Ca^{2+} C a 2 + binds to the carboxylate groups ( − C O O − -COO^- − CO O − ) along adjacent polyacrylic acid chains, forming an initial calcium polyacrylate gel matrix. At this stage, the cement is rigid enough to carve but remains structurally fragile. It is exceptionally vulnerable to water contamination (which leaches out unbonded cations, causing chalky friability) and water desiccation (which dries out the matrix, causing microcracking and loss of adhesion).
Stage 3: Hardening / Maturation (Final Set, 24 to 48 Hours): Over the next 24 to 48 hours, trivalent aluminum ions ( A l 3 + Al^{3+} A l 3 + ) displace calcium ions. Because aluminum is trivalent, each A l 3 + Al^{3+} A l 3 + ion coordinates three carboxylate groups across polyacrylic acid strands, creating a dense, heavily cross-linked aluminum polyacrylate matrix. The refractive index of the gel matrix shifts closer to that of the unreacted glass cores, increasing compressive strength, wear resistance, and optical translucency.
Loading diagram...
3. Chemical Adhesion to Enamel and Dentin
Unlike resin composites that depend on micromechanical interlocking via hybrid layers, conventional GIC bonds chemically to tooth mineral without requiring an adhesive resin:
Ionic Chelation: The ionized carboxylate groups ( − C O O − -COO^- − CO O − ) of polyacrylic acid displace phosphate ions ( P O 4 3 − PO_4^{3-} P O 4 3 − ) from the hydroxyapatite lattice ( C a 10 ( P O 4 ) 6 ( O H ) 2 Ca_{10}(PO_4)_6(OH)_2 C a 10 ( P O 4 ) 6 ( O H ) 2 ) in enamel and dentin, forming permanent ionic bridges with structural calcium ions ( C a 2 + Ca^{2+} C a 2 + ).
Ion-Exchange Layer: An interfacial, acid-resistant layer of calcium-polyacrylate complex forms, measuring 1–2 μm in thickness.
Dentin Conditioning Protocol: Before placing GIC, the cavity preparation must be treated with 10% to 20% polyacrylic acid (Cavity Conditioner) for 10 to 20 seconds. This gently dissolves the loose smear layer and increases substrate surface energy while preserving smear plugs inside dentinal tubules and leaving hydroxyapatite calcium ions available for chemical chelation. Etching dentin with 37% phosphoric acid prior to conventional GIC is contraindicated , as it strips away the very calcium ions required for chemical bonding.
4. Fluoride Kinetics & Thermal Expansion
Fluoride Burst & Sustained Release: GIC exhibits a high "burst effect" of fluoride release during the first 24 to 48 hours following placement, providing acute antimicrobial inhibition against Streptococcus mutans . This is followed by a prolonged, steady-state diffusion release over months and years.
Recharge Potential: GIC functions as a "fluoride sponge" or rechargeable battery. Exposure to topical fluoride (fluoridated dentifrices, 5000 ppm gels, or professionally applied fluorides) recharges the cement matrix, which subsequently leaches fluoride back into adjacent enamel and dentin.
Coefficient of Thermal Expansion (CTE): The CTE of conventional GIC is approximately 10 − 11 × 10 − 6 / ∘ C 10-11 \times 10^{-6}/^\circ\text{C} 10 − 11 × 1 0 − 6 / ∘ C , which mirrors that of natural human dentin ( 8 − 11 × 10 − 6 / ∘ C 8-11 \times 10^{-6}/^\circ\text{C} 8 − 11 × 1 0 − 6 / ∘ C ). This thermal compatibility prevents microleakage, marginal gap formation, and thermal shear stress during hot and cold oral ingestion.
Resin-Modified Glass Ionomers (RMGI)
To overcome the poor early physical strength, brittle fracture, and extreme moisture sensitivity of conventional GIC, resin-modified glass ionomers (RMGI) incorporate a light-cured resin component.
Composition: Formulated by adding hydrophilic methacrylate monomers—predominantly HEMA (2-hydroxyethyl methacrylate) —and photoinitiators (camphorquinone) to the polyacrylic acid liquid, paired with fluoroaluminosilicate glass powder.
Dual-Cure Chemistry:
Reaction 1 (Photopolymerization): Visible light activation initiates immediate free-radical cross-linking of HEMA, producing a rigid polymer network within 20 to 40 seconds. This confers immediate early fracture toughness, low solubility, and resistance to water contamination.
Reaction 2 (Acid-Base Reaction): The classic acid-base ionic cross-linking continues in the dark at a sustained pace, producing the mature aluminum polyacrylate matrix over 24 hours.
Toxicity Warning: Uncured free HEMA monomer is cytotoxic to pulp cells and readily diffuses through open dentinal tubules. RMGI is strictly contraindicated for direct pulp capping.
Warning
Cytotoxicity of Free HEMA Monomer: Uncured 2-hydroxyethyl methacrylate (HEMA) monomer contained in resin-modified glass ionomer (RMGI) liquids is highly cytotoxic to human dental pulp cells. Free HEMA readily diffuses through patent dentinal tubules into the pulp chamber, triggering microvascular vasoconstriction, suppression of cellular respiration, and pulpal cell apoptosis. RMGI is strictly contraindicated for direct pulp capping or direct placement on exposed pulpal tissue.
Compomers and Giomers
Compomers (Polyacid-Modified Resin Composites):
Anhydrous formulations containing dimethacrylate resins (Bis-GMA, UDMA) and filler particles embedded in a dehydrated polyacid matrix. No water is present in the syringe.
Setting is initiated 100% by visible light photopolymerization. Only after placement in the oral cavity does saliva absorption introduce water, triggering a minor, secondary acid-base reaction.
Compomers behave mechanically like resin composites; their fluoride release is significantly lower than GIC and rechargeability is negligible.
Giomers (Pre-Reacted Glass Ionomer Technology):
Formulated with pre-reacted glass ionomer filler particles (PRG particles) embedded within a resin matrix. The glass particles are pre-treated with polyacrylic acid prior to compounding into the resin.
Giomers offer the high polishability, compressive strength, and wear resistance of composite resin while maintaining sustained, rechargeable fluoride release.
Bioactive Calcium Silicates (Bioceramics)
Bioactive calcium silicate cements are hydraulic biomaterials that set in the presence of water, establishing an alkaline environment that induces hard-tissue deposition.
1. Mineral Trioxide Aggregate (MTA)
Formulation: Developed by Torabinejad in 1993, MTA consists of 75% Portland cement (tricalcium silicate, dicalcium silicate, tricalcium aluminate), 20% bismuth oxide (radiopacifier), and 5% gypsum (calcium sulfate dihydrate).
Hydration Setting: When mixed with sterile water, tricalcium silicate hydrates to form a rigid calcium silicate hydrate gel and releases copious calcium hydroxide ( C a ( O H ) 2 Ca(OH)_2 C a ( O H ) 2 ): Tricalcium Silicate + H 2 O → Calcium Silicate Hydrate Gel + Ca(OH) 2 \text{Tricalcium Silicate} + \text{H}_2\text{O} \rightarrow \text{Calcium Silicate Hydrate Gel} + \text{Ca(OH)}_2 Tricalcium Silicate + H 2 O → Calcium Silicate Hydrate Gel + Ca(OH) 2
Mechanism of Bioactivity: The release of C a ( O H ) 2 Ca(OH)_2 C a ( O H ) 2 elevates the local pH to 12.5 , producing potent antibacterial activity. In contact with phosphate-rich interstitial tissue fluids, the material precipitates a superficial layer of carbonated hydroxyapatite , creating a biological seal and stimulating pulpal mesenchymal cells via bone morphogenetic proteins (BMP-2) and transforming growth factor-beta 1 (TGF- β 1 \beta 1 β 1 ) to deposit a reparative dentin bridge.
Clinical Limitations: Original ProRoot MTA has a prolonged setting time (2.5 to 4 hours), sandy handling consistency, and risk of gray coronal tooth discoloration caused by bismuth oxide oxidation.
2. Biodentine (Active Biosilicate Technology)
Formulation: Synthetic, high-purity tricalcium silicate powder blended with calcium carbonate (filler) and zirconium oxide (radiopacifier). The liquid consists of an aqueous solution of calcium chloride ( C a C l 2 CaCl_2 C a C l 2 ) as a setting accelerator and a water-soluble polycarboxylate polymer.
Setting & Handling: C a C l 2 CaCl_2 C a C l 2 accelerates the hydration reaction, shortening setting time to 10 to 12 minutes . Compressive strength reaches ~300 MPa within 28 days (matching natural dentin).
Esthetic Advantage: By replacing bismuth oxide with zirconium oxide, Biodentine eliminates the coronal staining and discoloration associated with MTA, making it the material of choice in the anterior esthetic zone.
Biomaterials Comparison Table
Property / Parameter Conventional GIC Resin-Modified GIC Compomer Giomer Bioceramic (Biodentine)
Setting Mechanism Acid-base ionic Dual-cure (light + acid-base) Photopolymerization (+ late moisture set) Photopolymerization Hydraulic hydration
Chemical Adhesion True ionic chelation Chelation + micromechanical Micromechanical (requires adhesive) Micromechanical (requires adhesive) Interfacial mineral precipitation
Pre-Treatment 10–20% polyacrylic acid 10–20% polyacrylic acid 37% phosphoric acid + bond 37% phosphoric acid + bond None (moist dentin)
Fluoride Release High initial burst; sustained High; sustained Low; minimal Moderate to high; sustained None (releases C a 2 + Ca^{2+} C a 2 + and O H − OH^- O H − )
- Fluoride Recharge Excellent Very good Minimal Excellent None
- Early Moisture Sensitivity Extreme (requires glaze) Low to moderate Low Low Requires moisture to set
CTE ( 10 − 6 / ∘ C 10^{-6}/^\circ\text{C} 1 0 − 6 / ∘ C ) 10–11 (matches dentin) 15–20 25–35 25–35 ~10 (matches dentin)
Primary Clinical Roles Cervical lesions, ART, temp Class III, Class V, liners Pediatric low-stress Class II Class I, II, V esthetics Pulp capping, dentin replacement