Study guide
8.1 Basic Implantology: Patient Assessment, Treatment Planning and Implant Positioning
Saudi Dental Licensure Examination SDLE / SPLE - Dentist
Track your progress as you read
Finished sections get a check mark.
1 Introduction
About the SDLE: Format, Scoring, Eligibility, Attempts & Blueprint
2 Chapter 1: Operative Dentistry & Caries Management
1.1 Caries Etiology, Histopathology, and Risk Assessment (CAMBRA / ICDAS) 1.2 Cavity Preparation Principles and Tooth Isolation (Rubber Dam Mechanics) 1.3 Direct Composite Resin Restorations, Adhesion & Curing Dynamics 1.4 Indirect Inlays and Onlays, Minimally Invasive Restorations, Finishing and Repair
3 Chapter 2: Direct Restorations & Dental Biomaterials
2.1 Dental Amalgam Restorations, Matrix Systems & Proximal Contact Mechanics 2.2 Glass Ionomer Cements, Resin-Modified Glass Ionomers & Bioactive Materials 2.3 Dental Bonding Agents (Etch-and-Rinse vs. Self-Etch vs. Universal Systems) 2.4 Direct Pulp Capping, Indirect Pulp Capping & Pulpal Protection Liners
4 Chapter 3: Fixed Prosthodontics — Treatment Planning & Tooth Preparation
3.1 Fixed Partial Denture Treatment Planning: Abutments, Pontics and Endodontically Treated Teeth 3.2 Biological, Mechanical, and Esthetic Principles of Crown Preparations 3.3 Finish Lines and Margin Geometries (Chamfer, Shoulder, Feather-Edge) 3.4 Temporary/Provisional Restorations & Tissue Management (Gingival Retraction) 3.5 Impression Techniques, Digital Scanning & Working Casts
5 Chapter 4: Fixed Prosthodontics — Materials, Luting, Esthetics & Delivery
4.1 Dental Ceramics (Feldspathic, Lithium Disilicate, Zirconia) & Metal-Ceramics 4.2 Dental Cements and Luting Protocols (Zinc Phosphate, GI, RMGI, Resin) 4.3 Shade Selection, Color Science, and Esthetic Veneers 4.4 Fixed Prosthesis Try-In, Delivery, Complications and Repair
6 Chapter 5: Removable Partial Dentures
5.1 Removable Partial Dentures: Kennedy Classification, Rests, and Major Connectors 5.2 RPD Direct Retainers, Indirect Retainers & Surveying Principles 5.3 RPD Design Sequence, Mouth Preparation, Impressions, Try-In, Delivery and Maintenance
7 Chapter 6: Complete Dentures
6.1 Complete Denture Anatomy, Border Molding & Secondary Impressions 6.2 Maxillomandibular Relationships, Vertical Dimension & Occlusion Schemes 6.3 Complete Denture Diagnosis, Try-In, Insertion, Post-Insertion Problems and Relining
8 Chapter 7: Dental Anatomy, Occlusion & Articulators
7.1 Dental Anatomy: Tooth Notation, Permanent Tooth Morphology and Identification 7.2 Principles of Occlusion (Centric Relation, MIC, Canine Guidance, Group Function) 7.3 Articulators, Facebow Transfers & Occlusal Splints
9 Chapter 8: Basic Implantology
8.1 Basic Implantology: Patient Assessment, Treatment Planning and Implant Positioning 8.2 Implant Prosthodontics: Biomechanics, Abutment Types & Loading Protocols
10 Chapter 9: Ethics, Professionalism, Infection Control & Patient Safety
9.1 Ethics, Professionalism and Saudi Health Practice Law 9.2 Infection Control and Patient Safety in the Dental Clinic
11 Chapter 10: Periodontal Anatomy, Classification, Etiology & Pathology
10.1 Anatomy of the Periodontium and Biologic Width 10.2 2017 AAP/EFP World Workshop Classification (Staging and Grading) 10.3 Periodontal Microbiology, Host Response & Systemic Risk Factors 10.4 Applied Periodontal Pathology: Lesion Stages, Necrotizing Disease, Abscesses and Gingival Enlargement
12 Chapter 11: Periodontal Examination & Non-Surgical Therapy
11.1 Clinical Periodontal Assessment, Probing, Mobility & Furcation Involvement 11.2 Scaling and Root Planing, Ultrasonic Instrumentation & Full-Mouth Disinfection 11.3 Antimicrobial Therapy, Host Modulation & Periodontal Maintenance
13 Chapter 12: Surgical Periodontics, Peri-Implant Disease & Multidisciplinary Care
12.1 Periodontal Flap Surgery & Resective Osseous Surgery 12.2 Regenerative Periodontal Therapy (GTR, Bone Grafts, Enamel Matrix Derivatives) 12.3 Mucogingival Deformities, Soft Tissue Grafting & Peri-Implant Diseases (Mucositis vs. Peri-Implantitis) 12.4 Iatrogenic Factors, Occlusal Trauma and Multidisciplinary Periodontal Care
14 Chapter 13: Pulpal & Periapical Pathology, Diagnosis & Endodontic Treatment Planning
13.1 Pulpal Biology, Pathogenesis, and Diagnostic Terminology (AAE Classification) 13.2 Diagnostic Testing Modalities (Thermal, Electric, Percussion, Palpation, CBCT) 13.3 Endodontic Treatment Planning, Case Difficulty, Retreatment, Apical Surgery and Outcomes
15 Chapter 14: Endodontic Treatment: Anatomy, Access, Shaping & Irrigation
14.1 Internal Tooth Anatomy and Endodontic Access Cavity Preparation 14.2 Root Canal Instrumentation: Hand, Rotary, and Reciprocating Nickel-Titanium 14.3 Endodontic Irrigants (NaOCl, EDTA, CHX), Intracanal Medicaments & Smear Layer
16 Chapter 15: Obturation, Mishaps, Emergencies, Trauma & Endo-Perio Lesions
15.1 Root Canal Obturation Techniques (Cold Lateral, Warm Vertical, Bioceramic Sealers) 15.2 Management of Procedural Accidents (Ledges, Perforations, Separated Instruments) 15.3 Endodontic Emergencies, Flare-ups & Traumatic Dental Injuries (Luxations, Avulsion) 15.4 Endodontic-Periodontal Lesions, Cracked Teeth and Vertical Root Fractures
17 Chapter 16: Local Anesthesia, Surgical Principles, Biopsy & Exodontia
16.1 Local Anesthetics, Vasoconstrictors, Dosages & Nerve Block Techniques 16.2 Principles of Oral Surgery, Suturing, Wound Healing and Biopsy Techniques 16.3 Exodontia Principles, Surgical Extraction & Management of Impacted Third Molars 16.4 Post-Extraction Complications (Alveolar Osteitis, Hemorrhage, Oroantral Fistula)
18 Chapter 17: Odontogenic Infections, Maxillofacial Trauma & Dentofacial Deformities
17.1 Odontogenic Infections, Fascial Space Spread & Ludwig's Angina 17.2 Maxillofacial Trauma and Dentofacial Deformities
19 Chapter 18: Medical Emergencies & Medically Compromised Patients
18.1 Dental Office Medical Emergencies (Syncope, Anaphylaxis, Angina, Hypoglycemia) 18.2 Management of Medically Compromised Dental Patients (Cardiovascular, Anticoagulated, Diabetic) 18.3 Dental Management of Hematologic and Oncology Patients 18.4 Endocrine, Hepatic, Renal, Pulmonary, Neurological and Psychiatric Conditions in Dental Practice
20 Chapter 19: Oral Mucosal, Infectious, Immunologic & Salivary Gland Pathology
19.1 Benign and Malignant Oral Mucosal Lesions (Leukoplakia, Lichen Planus, OSCC) 19.2 Microbiological Infections of the Oral Mucosa: Fungal, Viral and Bacterial 19.3 Immunologic and Allergic Conditions, Reactive Lesions and Physical or Chemical Injuries 19.4 Salivary Gland Diseases: Obstruction, Infection, Sjögren Syndrome and Tumors
21 Chapter 20: Jaw Pathology & Abnormalities of Teeth
20.1 Odontogenic Cysts and Tumors (Radicular Cyst, Dentigerous Cyst, OKCs, Ameloblastoma) 20.2 Bone Pathology of the Jaws: Fibro-Osseous Lesions, Giant Cell Lesions, Osteomyelitis and Malignancy 20.3 Abnormalities of Teeth and Developmental Defects of the Oral Region
22 Chapter 21: Orofacial Pain, TMD & Neuromuscular Disorders
21.1 Differential Diagnosis of Odontogenic vs. Non-Odontogenic Orofacial Pain 21.2 Temporomandibular Disorders and Neuromuscular Conditions
23 Chapter 22: Orthodontic Growth, Diagnosis & Treatment Planning
22.1 Craniofacial Growth, Development & Angle's Malocclusion Classification 22.2 Cephalometric Landmarks, Analysis & Biology of Orthodontic Tooth Movement 22.3 Etiology of Malocclusion, Orthodontic Diagnosis and Treatment Planning
24 Chapter 23: Orthodontic Treatment: Interceptive, Skeletal, Canines & Fixed Appliances
23.1 Interceptive Orthodontics, Serial Extraction & Space Maintainers (Band and Loop, Nance, Lingual Arch) 23.2 Management of Class I, Class II, Class III and Skeletal Problems 23.3 Ectopic and Impacted Maxillary Canines 23.4 Fixed Appliances, Anchorage, Adult Orthodontics and Retention
25 Chapter 24: Pediatric Dentistry: Development, Behavior, Caries & Restorative Care
24.1 Dental Development, Eruption Chronology and Examination of the Child 24.2 Pediatric Behavior Guidance, Nitrous Oxide & Early Childhood Caries (ECC) 24.3 Pediatric Caries Prevention and Restorative Dentistry: Sealants, ART, Crowns and Material Choice
26 Chapter 25: Pediatric Pulp Therapy, Pain Management, Oral Surgery, Trauma & Child Protection
25.1 Pediatric Pulp Therapy (Pulpotomy vs. Pulpectomy) and Stainless Steel Crowns 25.2 Pediatric Local Anesthesia, Pain Management and Pediatric Oral Surgery 25.3 Traumatic Injuries to the Primary Dentition and Recognition of Child Abuse and Neglect
8.1 Basic Implantology: Patient Assessment, Treatment Planning and Implant Positioning
Key Takeaways Explain This Topic AI
Leave at least about 1.5 mm between an implant and an adjacent tooth and about 3 mm between adjacent implants to preserve interproximal bone and papillae.
Keep a safety margin of about 2 mm between the apex of a mandibular implant and the inferior alveolar canal, confirmed on cone-beam CT.
Lekholm and Zarb bone quality ranges from Type 1 (dense cortical, often anterior mandible) to Type 4 (thin cortex and loose trabeculae, typically posterior maxilla).
The ITI classifies implant placement after extraction as Type 1 immediate, Type 2 early with soft-tissue healing (4-8 weeks), Type 3 early with partial bone healing (12-16 weeks) and Type 4 late (more than 6 months).
Smoking, uncontrolled diabetes, previous periodontitis, head and neck radiotherapy and high-dose antiresorptive therapy raise the risk of implant failure or osteonecrosis and must be assessed before surgery.
Last updated: October 2026
The restorative section of the SDLE blueprint includes basic implantology : assessing suitability, planning straightforward implant cases (type, size and position), restoring them and managing minor complications. Periodontics adds peri-implant disease, and the implant prosthodontics section covers abutments and loading. This section is the planning step that comes first.
Patient Assessment
- Factor Effect Planning response
- Smoking Higher failure and peri-implantitis rates Cessation advice; informed consent
Diabetes Poor control impairs healing and raises infection risk Aim for good glycemic control (HbA1c well controlled) before surgery
History of periodontitis Higher peri-implantitis risk Treat periodontitis first; strict maintenance
Head and neck radiotherapy Osteoradionecrosis risk, lower survival in irradiated bone Specialist planning; consider hyperbaric oxygen protocols per local practice
Antiresorptive therapy MRONJ risk, highest with oncology-dose IV bisphosphonates or denosumab Usually avoid implants in oncology-dose patients; assess osteoporosis patients individually
Bruxism Prosthetic complications, overload Occlusal guard, wider implants, careful occlusion
Uncontrolled systemic disease, recent myocardial infarction or stroke, active chemotherapy High medical risk Defer elective surgery
- Growth Implants do not erupt with growing alveolus Delay until growth is complete
- Imaging and Bone Assessment
Panoramic and periapical radiographs give an overview, but cone-beam CT (CBCT) is standard for measuring bone width and height and locating the inferior alveolar canal, mental foramen, incisive canal, maxillary sinus and nasal floor.
Lekholm and Zarb bone quality: Type 1 almost entirely homogeneous cortical bone (anterior mandible); Type 2 thick cortex around dense trabeculae; Type 3 thin cortex around dense trabeculae; Type 4 thin cortex around low-density trabeculae (posterior maxilla) . Softer bone needs longer healing and under-preparation of the osteotomy for primary stability.
A radiographic or surgical guide made from a diagnostic wax-up places the implant where the final tooth will be (prosthetically driven planning).
Safety Distances and Dimensions
- Structure Guideline
- Adjacent natural tooth At least about 1.5 mm from implant to root
- Adjacent implant At least about 3 mm between implants
- Inferior alveolar canal About 2 mm safety zone above the canal
- Mental foramen Stay anterior or posterior with a margin; the nerve may loop anteriorly before exiting
- Buccal bone About 2 mm of buccal bone (especially in the esthetic zone) to resist recession
- Restorative space Enough inter-arch height for abutment and crown (more for cement-retained designs)
Papilla preservation (Tarnow): when the distance from the contact point to the interproximal bone crest is 5 mm or less , a papilla is almost always present between natural teeth; between two implants the papilla is shorter, so adjacent implants in the esthetic zone are avoided where possible.
Three-Dimensional Positioning in the Esthetic Zone
Mesiodistal: centred in the space respecting tooth and implant distances.
Buccolingual: platform slightly palatal to the planned emergence so that buccal bone remains.
Apicocoronal: platform about 3-4 mm apical to the planned gingival margin (depending on the implant system) to create a natural emergence profile without excessive depth.
Angulation: along the prosthetic axis so that a screw-retained crown exits palatally where possible.
Timing After Extraction (ITI)
Type Timing Notes
Type 1 immediate Same day as extraction Needs intact walls, thick buccal bone, good primary stability; esthetic risk in thin phenotype
- Type 2 early 4-8 weeks (soft-tissue healing) Keratinized tissue closes over the socket
- Type 3 early 12-16 weeks (partial bone healing) More bone for stability
- Type 4 late More than 6 months Ridge may have resorbed; may need grafting
Ridge (socket) preservation with grafts and membranes reduces resorption when placement is delayed.
Augmentation
Sinus floor elevation: a crestal (osteotome) approach when moderate residual bone height remains (commonly about 5 mm or more) and a lateral window approach when residual height is minimal.
Guided bone regeneration for dehiscence or fenestration defects; block grafts or ridge splitting for narrow ridges.
Short implants can avoid augmentation in selected posterior cases.
Choosing Implant Diameter and Length
Diameter follows the space and the tooth replaced: narrow implants (about 3.0-3.5 mm) for mandibular incisors and maxillary lateral incisors, regular diameter (about 4 mm) for most premolars and anterior sites, and wide diameter (about 5 mm or more) for molar sites with adequate bone width.
Length follows the bone height available after the safety margins; in good bone, moderate lengths (about 8-11 mm) perform well, and short implants are an option over the inferior alveolar canal or under the sinus.
Primary stability is judged by insertion torque and resonance frequency analysis; poor stability means delayed loading.
Number of implants for fixed full-arch prostheses is commonly four to six, with the anterior-posterior spread governing how long a cantilever can be.
Success Criteria and Maintenance
The classic Albrektsson criteria (1986) define success as an immobile implant, no peri-implant radiolucency, vertical bone loss of less than 0.2 mm per year after the first year of service, and no persistent pain, infection or paresthesia. Implant patients need regular recall with probing, radiographs as indicated, and professional cleaning with implant-safe instruments.
Exam Traps
Planning implants from the bone alone, without a wax-up, leads to poorly positioned crowns; planning is prosthetically driven .
Placing an implant 0.5 mm from an adjacent root risks root damage and loss of interproximal bone.
Oncology patients on monthly IV zoledronate are a high MRONJ risk for implant surgery.