Study guide

3.5 Time, Work, Efficiency & Pipes & Cisterns

SBI PO Probationary Officer

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction & SBI PO Exam Architecture

1.1 SBI PO Exam Structure, Phases & Sectional Timing 1.2 Eligibility, Age Relaxation & Number of Attempts 1.3 Mark Calculation, One-Fourth Negative Marking & Cut-offs 1.4 Descriptive Communication Test (Email, Situation, Report/Précis) 1.5 Phase 3: Psychometric Test, Group Exercise & Interview Preparation 1.6 Recommended Study Plan & Mock Test Strategy

2 Chapter 2: Quantitative Aptitude — Foundation & Speed Math

2.1 Vedic Math, Fast Calculation & Approximation Techniques 2.2 Number Series (Missing & Wrong Number Patterns) 2.3 Quadratic Equations & Quantity Comparisons (Q1 vs Q2) 2.4 Simplification & Order of Operations 2.5 Data Sufficiency in Quantitative Aptitude

3 Chapter 3: Arithmetic & Applied Problem Solving

3.1 Percentages, Profit, Loss & Discount Calculations 3.2 Simple Interest & Compound Interest (Compounding Cycles & Differences) 3.3 Ratio & Proportion, Partnerships & Ages 3.4 Averages, Mixtures & Alligations 3.5 Time, Work, Efficiency & Pipes & Cisterns 3.6 Speed, Distance, Time, Trains & Boats/Streams 3.7 Permutation, Combination & Probability in Banking Exams

4 Chapter 4: Advanced Data Analysis & Data Interpretation (DI)

4.1 Table & Line Graph Data Interpretation 4.2 Bar Chart & Pie Chart Data Interpretation 4.3 Caselet Data Interpretation (Paragraph-based DI & Venn Caselets) 4.4 Missing Data DI & Radar/Spider Graph Interpretation 4.5 Arithmetic-based DI (Profit-Loss, Time-Work, TSD) & Funnel/Scatter DI

5 Chapter 5: Analytical Reasoning

5.1 Syllogisms (Only a few, Some not & Reverse Syllogism) 5.2 Coded & Mathematical Inequalities 5.3 Coding-Decoding (Coded Statements & Mains Patterns) 5.4 Blood Relations & Direction Sense 5.5 Input-Output Machine Rearrangement

6 Chapter 6: Puzzles & Seating Arrangement

6.1 Linear & Circular Seating Arrangement (Single/Parallel Rows & Variable Binding) 6.2 Floor & Box Puzzles (Multi-story, Vacant floor & Stacking Order) 6.3 Matrix & Category Puzzles (Department/Profession Allocation & Constraint Elimination) 6.4 Scheduling Puzzles (Day-Month-Year combinations & Time Slots)

7 Chapter 7: Critical Reasoning

7.1 Statement & Implicit Assumptions 7.2 Statement & Conclusions vs Strong/Weak Arguments 7.3 Statement & Course of Action 7.4 Cause & Effect Analysis 7.5 Critical Reasoning Passages (Strengthen/Weaken & Paradox Resolution)

8 Chapter 8: English Language

8.1 Reading Comprehension: Tone, Inference, Main Idea & Vocab in Context 8.2 Cloze Test & Double/Triple Fillers 8.3 Para Jumbles & Sentence Rearrangement 8.4 Error Spotting & Phrase Replacement (Grammar Rules) 8.5 Word Usage, Synonyms/Antonyms & Contextual Meaning 8.6 Match the Columns & Sentence Connectors/Starters

9 Chapter 9: Banking & Financial Awareness

9.1 Reserve Bank of India (RBI): History, Structure & Functions 9.2 Monetary Policy Framework: MPC, Repo Rate, SDF, MSF, CRR, SLR & Inflation Targeting 9.3 Indian Financial System: Commercial Banks, Small Finance Banks, Payment Banks & NBFCs 9.4 Financial Inclusion & Government Banking Schemes (PMJDY, PMSBY, PMJJBY, APY, MUDRA, KCC) 9.5 Banking Current Affairs & Financial News Dynamics

10 Chapter 10: General & Banking Awareness — Indian Economy, Financial Markets & Regulations

10.1 Economic Indicators: GDP, NNP, WPI, CPI, IIP & National Income 10.2 Forex & International Trade: Balance of Payments, LRS, NEER/REER & World Bank/IMF 10.3 Union Budget & Economic Survey: Fiscal Deficit, CapEx & Revenue Receipts 10.4 Money Market vs Capital Market: T-Bills, Commercial Paper, CD, Stocks, Bonds & SEBI 10.5 Priority Sector Lending (PSL), Non-Performing Assets (NPAs), SARFAESI, IBC & Basel III

11 Chapter 11: Computer Aptitude

11.1 Computer Fundamentals & Hardware Architecture 11.2 Operating Systems & System Software 11.3 Networking Concepts & Internet Protocols 11.4 Cybersecurity & Banking IT Security 11.5 Database Management Systems (DBMS) & MS Office Suite

3.5 Time, Work, Efficiency & Pipes & Cisterns

Key Takeaways Explain This Topic AI

The LCM method assigns total work as the least common multiple of individual completion times, replacing fraction addition with integer work units.

Work done equals Efficiency multiplied by Time (W = E × T); efficiency and time are inversely proportional when work is held constant.

The chain rule formula (M1 × D1 × H1) / W1 = (M2 × D2 × H2) / W2 handles variable workforce, hours per day, and output scale.

Pipes and cisterns operate on identical principles to time and work, with inlet pipes performing positive work and outlet leaks performing negative work.

Alternate day working models require identifying complete multi-day work cycles before evaluating remaining fractional work.

Last updated: July 2026

Time, Work, Efficiency & Pipes & Cisterns

Time and Work problems test logical allocation of efficiency, combined work outputs, variable workforce chain rules, and reservoir filling/draining mechanics. Assigning arbitrary work units using the Least Common Multiple (LCM) method streamlines calculations and eliminates tedious fraction arithmetic.

1. Core Principles & LCM Method

Fundamental Equation Work Done = Efficiency × Time ⟹ W = E × T \text{Work Done} = \text{Efficiency} \times \text{Time} \implies W = E \times T Work Done = Efficiency × Time ⟹ W = E × T

Inverse Relationship: Efficiency ( E E E ) is inversely proportional to time ( T T T ) required to complete a fixed task. If A takes D A D_A D A ​ days, A's 1-day work efficiency is 1 D A \frac{1}{D_A} D A ​ 1 ​ .

LCM Unit Assignment Method:

Take the LCM of all given completion times as Total Work Units ( W W W ).

Calculate individual 1-day or 1-hour work rates (units/day = Total Units Individual Days = \frac{\text{Total Units}}{\text{Individual Days}} = Individual Days Total Units ​ ).

Sum or subtract unit rates to solve combined work timelines.

2. Chain Rule & Workforce Equations

When workforce size, daily working hours, efficiency rates, and output quantities vary, use the generalized Chain Rule formula: M 1 × D 1 × H 1 × E 1 W 1 = M 2 × D 2 × H 2 × E 2 W 2 \frac{M_1 \times D_1 \times H_1 \times E_1}{W_1} = \frac{M_2 \times D_2 \times H_2 \times E_2}{W_2} W 1 ​ M 1 ​ × D 1 ​ × H 1 ​ × E 1 ​ ​ = W 2 ​ M 2 ​ × D 2 ​ × H 2 ​ × E 2 ​ ​

Where M M M = number of workers, D D D = days, H H H = hours per day, E E E = efficiency factor, W W W = units of work produced.

3. Pipes and Cisterns Mechanics

Pipes and Cisterns follow identical mathematical laws as Time and Work:

Inlet Pipe (Positive Work): Fills the tank. 1-hour rate = + 1 Fill Time = +\frac{1}{\text{Fill Time}} = + Fill Time 1 ​ .

Outlet Pipe / Leak (Negative Work): Empties the tank. 1-hour rate = − 1 Empty Time = -\frac{1}{\text{Empty Time}} = − Empty Time 1 ​ .

Net Filling Rate: Net 1-Hour Work = ∑ ( Inlet Rates ) − ∑ ( Outlet Rates ) \text{Net 1-Hour Work} = \sum (\text{Inlet Rates}) - \sum (\text{Outlet Rates}) Net 1-Hour Work = ∑ ( Inlet Rates ) − ∑ ( Outlet Rates )

  • 4. Step-by-Step Worked Math Examples
  • Worked Example 1: Efficiency Ratios & Combined Work

Problem: A is 60% more efficient than B. If B alone can complete a work in 24 days, in how many days can A and B working together finish the same work?

Step-by-Step Solution:

Let B's daily efficiency E B = 100 E_B = 100 E B ​ = 100 units/day.

A is 60% more efficient, so A's daily efficiency E A = 100 + 60 = 160 E_A = 100 + 60 = 160 E A ​ = 100 + 60 = 160 units/day.

Ratio of efficiency E A : E B = 160 : 100 = 8 : 5 E_A : E_B = 160 : 100 = 8 : 5 E A ​ : E B ​ = 160 : 100 = 8 : 5 .

B takes 24 days, so Total Work W = E B × 24 = 5 × 24 = 120 W = E_B \times 24 = 5 \times 24 = 120 W = E B ​ × 24 = 5 × 24 = 120 units.

Combined daily efficiency of ( A + B ) = 8 + 5 = 13 (A + B) = 8 + 5 = 13 ( A + B ) = 8 + 5 = 13 units/day.

Time taken together = Total Work Combined Efficiency = 120 13 = 9 3 13 days = \frac{\text{Total Work}}{\text{Combined Efficiency}} = \frac{120}{13} = 9 \frac{3}{13} \text{ days} = Combined Efficiency Total Work ​ = 13 120 ​ = 9 13 3 ​ days .

Worked Example 2: Alternate Day Work Strategy

Problem: A can finish a work in 10 days and B in 15 days. If they work on alternate days starting with A, in how many days will the work be completed?

Step-by-Step Solution:

Take LCM of completion times (10 and 15) = 30 = 30 = 30 units (Total Work).

A's daily rate = 30 10 = 3 = \frac{30}{10} = 3 = 10 30 ​ = 3 units/day.

B's daily rate = 30 15 = 2 = \frac{30}{15} = 2 = 15 30 ​ = 2 units/day.

Work cycle: Day 1 (A) = 3 = 3 = 3 units; Day 2 (B) = 2 = 2 = 2 units.

1 2-day cycle output = 3 + 2 = 5 = 3 + 2 = 5 = 3 + 2 = 5 units.

Number of 2-day cycles required to reach 30 units = 30 5 = 6 = \frac{30}{5} = 6 = 5 30 ​ = 6 cycles.

Total time = 6 cycles × 2 days/cycle = 12 days = 6 \text{ cycles} \times 2 \text{ days/cycle} = 12 \text{ days} = 6 cycles × 2 days/cycle = 12 days .

Worked Example 3: Cistern Inlet and Leak Calculations

Problem: Pipe A can fill a tank in 12 hours, and Pipe B can fill it in 15 hours. A leak at the bottom can empty the full tank in 20 hours. If all three are opened simultaneously, how long will it take to fill the tank?

Step-by-Step Solution:

Take LCM of ( 12 , 15 , 20 ) = 60 (12, 15, 20) = 60 ( 12 , 15 , 20 ) = 60 units (Tank Capacity).

Pipe A rate = + 60 12 = + 5 = +\frac{60}{12} = +5 = + 12 60 ​ = + 5 units/hour.

Pipe B rate = + 60 15 = + 4 = +\frac{60}{15} = +4 = + 15 60 ​ = + 4 units/hour.

Leak rate = − 60 20 = − 3 = -\frac{60}{20} = -3 = − 20 60 ​ = − 3 units/hour.

Net filling rate per hour = + 5 + 4 − 3 = + 6 = +5 + 4 - 3 = +6 = + 5 + 4 − 3 = + 6 units/hour.

Total time to fill tank = 60 6 = 10 hours = \frac{60}{6} = 10 \text{ hours} = 6 60 ​ = 10 hours .

5. Common Traps & Advanced Edge Cases

Incomplete Alternate Day Cycles: When work does not divide evenly into full 2-day cycles, evaluate remaining work units carefully. If 1 unit remains and it's A's turn (efficiency 3 units/day), add 1 3 \frac{1}{3} 3 1 ​ of a day to the full cycle count.

Negative Tank Filling: If outlet leak rate exceeds inlet rate, net work is negative, causing an already filled tank to empty rather than fill.