Study guide

2.5 Data Sufficiency in Quantitative Aptitude

SBI PO Probationary Officer

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Introduction & SBI PO Exam Architecture

1.1 SBI PO Exam Structure, Phases & Sectional Timing 1.2 Eligibility, Age Relaxation & Number of Attempts 1.3 Mark Calculation, One-Fourth Negative Marking & Cut-offs 1.4 Descriptive Communication Test (Email, Situation, Report/Précis) 1.5 Phase 3: Psychometric Test, Group Exercise & Interview Preparation 1.6 Recommended Study Plan & Mock Test Strategy

2 Chapter 2: Quantitative Aptitude — Foundation & Speed Math

2.1 Vedic Math, Fast Calculation & Approximation Techniques 2.2 Number Series (Missing & Wrong Number Patterns) 2.3 Quadratic Equations & Quantity Comparisons (Q1 vs Q2) 2.4 Simplification & Order of Operations 2.5 Data Sufficiency in Quantitative Aptitude

3 Chapter 3: Arithmetic & Applied Problem Solving

3.1 Percentages, Profit, Loss & Discount Calculations 3.2 Simple Interest & Compound Interest (Compounding Cycles & Differences) 3.3 Ratio & Proportion, Partnerships & Ages 3.4 Averages, Mixtures & Alligations 3.5 Time, Work, Efficiency & Pipes & Cisterns 3.6 Speed, Distance, Time, Trains & Boats/Streams 3.7 Permutation, Combination & Probability in Banking Exams

4 Chapter 4: Advanced Data Analysis & Data Interpretation (DI)

4.1 Table & Line Graph Data Interpretation 4.2 Bar Chart & Pie Chart Data Interpretation 4.3 Caselet Data Interpretation (Paragraph-based DI & Venn Caselets) 4.4 Missing Data DI & Radar/Spider Graph Interpretation 4.5 Arithmetic-based DI (Profit-Loss, Time-Work, TSD) & Funnel/Scatter DI

5 Chapter 5: Analytical Reasoning

5.1 Syllogisms (Only a few, Some not & Reverse Syllogism) 5.2 Coded & Mathematical Inequalities 5.3 Coding-Decoding (Coded Statements & Mains Patterns) 5.4 Blood Relations & Direction Sense 5.5 Input-Output Machine Rearrangement

6 Chapter 6: Puzzles & Seating Arrangement

6.1 Linear & Circular Seating Arrangement (Single/Parallel Rows & Variable Binding) 6.2 Floor & Box Puzzles (Multi-story, Vacant floor & Stacking Order) 6.3 Matrix & Category Puzzles (Department/Profession Allocation & Constraint Elimination) 6.4 Scheduling Puzzles (Day-Month-Year combinations & Time Slots)

7 Chapter 7: Critical Reasoning

7.1 Statement & Implicit Assumptions 7.2 Statement & Conclusions vs Strong/Weak Arguments 7.3 Statement & Course of Action 7.4 Cause & Effect Analysis 7.5 Critical Reasoning Passages (Strengthen/Weaken & Paradox Resolution)

8 Chapter 8: English Language

8.1 Reading Comprehension: Tone, Inference, Main Idea & Vocab in Context 8.2 Cloze Test & Double/Triple Fillers 8.3 Para Jumbles & Sentence Rearrangement 8.4 Error Spotting & Phrase Replacement (Grammar Rules) 8.5 Word Usage, Synonyms/Antonyms & Contextual Meaning 8.6 Match the Columns & Sentence Connectors/Starters

9 Chapter 9: Banking & Financial Awareness

9.1 Reserve Bank of India (RBI): History, Structure & Functions 9.2 Monetary Policy Framework: MPC, Repo Rate, SDF, MSF, CRR, SLR & Inflation Targeting 9.3 Indian Financial System: Commercial Banks, Small Finance Banks, Payment Banks & NBFCs 9.4 Financial Inclusion & Government Banking Schemes (PMJDY, PMSBY, PMJJBY, APY, MUDRA, KCC) 9.5 Banking Current Affairs & Financial News Dynamics

10 Chapter 10: General & Banking Awareness — Indian Economy, Financial Markets & Regulations

10.1 Economic Indicators: GDP, NNP, WPI, CPI, IIP & National Income 10.2 Forex & International Trade: Balance of Payments, LRS, NEER/REER & World Bank/IMF 10.3 Union Budget & Economic Survey: Fiscal Deficit, CapEx & Revenue Receipts 10.4 Money Market vs Capital Market: T-Bills, Commercial Paper, CD, Stocks, Bonds & SEBI 10.5 Priority Sector Lending (PSL), Non-Performing Assets (NPAs), SARFAESI, IBC & Basel III

11 Chapter 11: Computer Aptitude

11.1 Computer Fundamentals & Hardware Architecture 11.2 Operating Systems & System Software 11.3 Networking Concepts & Internet Protocols 11.4 Cybersecurity & Banking IT Security 11.5 Database Management Systems (DBMS) & MS Office Suite

2.5 Data Sufficiency in Quantitative Aptitude

Key Takeaways Explain This Topic AI

Data Sufficiency evaluates whether the given statements contain adequate information to solve a problem, not the final numerical value itself.

Always test Statement I and Statement II independently before attempting to combine them—combining statements prematurely is the most frequent candidate trap.

For 'Value Questions', a statement is sufficient ONLY if it yields one unique numerical value; multiple possible values render a statement insufficient.

For 'Yes/No Questions', a statement is sufficient if it yields a definitive 'ALWAYS YES' or a definitive 'ALWAYS NO'; ambiguity renders it insufficient.

Never assume non-stated mathematical constraints—do not assume variables are positive, integers, or distinct unless explicitly stated.

Last updated: July 2026

2.5 Data Sufficiency in Quantitative Aptitude

Data Sufficiency (DS) tests analytical reasoning, mathematical logic, and comprehension of constraints. Unlike standard Quantitative Aptitude questions where candidates must calculate a complete numerical answer, Data Sufficiency asks a fundamental meta-question: "Is the provided information sufficient to find a unique answer?"

In SBI PO Mains , Data Sufficiency carries heavy weightage (5 questions) and often features complex 3-statement formats across topics like Time & Work, Mixture Alligation, Mensuration, and Probability.

The Standard 5-Option Structure for 2-Statement DS

Every 2-statement Data Sufficiency question presents a main question stem followed by Statement (I) and Statement (II). The standard options are:

Statement (I) ALONE is sufficient , but Statement (II) ALONE is not sufficient.

Statement (II) ALONE is sufficient , but Statement (I) ALONE is not sufficient.

EITHER Statement (I) ALONE or Statement (II) ALONE is sufficient .

BOTH Statement (I) and Statement (II) TOGETHER are necessary , but neither alone is sufficient.

Statements (I) and (II) TOGETHER are NOT sufficient (Additional data required).

The 4-Step Elimination Algorithm (Flowchart Method)

Never evaluate both statements together at the beginning. Follow this strict sequential evaluation algorithm to eliminate options systematically: [Start: Analyze Question Stem]

  • │
  • ▼
  • [Step 1: Test Statement I Alone]
  • ├── SUFFICIENT ──► Eliminate Options 2, 4, 5 (Keep 1 or 3)
  • └── INSUFFICIENT ─► Eliminate Options 1, 3 (Keep 2, 4, 5)
  • │
  • ▼
  • [Step 2: Test Statement II Alone (Cover Statement I)]

├── If Step 1 was SUFFICIENT:

  • │ ├── Statement II SUFFICIENT ──► Choice 3 (Either Alone)
  • │ └── Statement II INSUFFICIENT ──► Choice 1 (Statement I Alone)
  • │

└── If Step 1 was INSUFFICIENT:

  • ├── Statement II SUFFICIENT ──► Choice 2 (Statement II Alone)
  • └── Statement II INSUFFICIENT ──► Proceed to Step 3
  • │
  • ▼
  • [Step 3: Test Statements I + II Combined]
  • ├── COMBINED SUFFICIENT ──► Choice 4 (Both Together Necessary)
  • └── COMBINED INSUFFICIENT ──► Choice 5 (Neither Sufficient / Data Inadequate)
  • Categorization: "Value Questions" vs. "Yes/No Questions"
  • 1. Value Questions ("What is the value of x?")

A statement is Sufficient if and only if it produces exactly ONE unique numerical value .

If a statement produces two possible answers (e.g., x = 5 x = 5 x = 5 or x = − 5 x = -5 x = − 5 ), it is INSUFFICIENT .

2. Yes/No Questions ("Is x an even integer?")

A statement is Sufficient if it gives a definitive "ALWAYS YES" or a definitive "ALWAYS NO" .

If a statement yields "YES" under one case and "NO" under another, it is INSUFFICIENT .

Important

A definitive "NO" answer to a Yes/No question means the statement IS SUFFICIENT! Candidates frequently confuse a logical "No" with data insufficiency.

Worked Example 1: Arithmetic Value Question (Ratios & Ages)

Question Stem : What is the present age of Rahul?

Statement I : Rahul is 4 years older than double his son's present age.

Statement II : The ratio of the present ages of Rahul and his son is 5 : 2 5 : 2 5 : 2 .

Step-by-step Evaluation :

Let Rahul's age be R R R and son's age be S S S .

Test Statement I alone : R = 2 S + 4 R = 2S + 4 R = 2 S + 4 .

This is a single linear equation in two unknown variables ( R , S R, S R , S ). Infinitely many solutions exist (e.g., S = 10 ⟹ R = 24 S=10 \implies R=24 S = 10 ⟹ R = 24 ; S = 15 ⟹ R = 34 S=15 \implies R=34 S = 15 ⟹ R = 34 ). INSUFFICIENT . (Eliminate Options 1 and 3).

Test Statement II alone : R / S = 5 / 2 ⟹ 2 R = 5 S R / S = 5 / 2 \implies 2R = 5S R / S = 5/2 ⟹ 2 R = 5 S .

This is another single ratio equation without absolute values. Infinitely many age pairs exist ( 25 : 10 , 50 : 20 25:10, 50:20 25 : 10 , 50 : 20 ). INSUFFICIENT . (Eliminate Option 2).

Test Statements I + II Combined :

We have a system of two independent linear equations:

R − 2 S = 4 R - 2S = 4 R − 2 S = 4

2 R − 5 S = 0 2R - 5S = 0 2 R − 5 S = 0 Substitute R = 2.5 S R = 2.5S R = 2.5 S from eq (2) into eq (1): 2.5 S − 2 S = 4 ⟹ 0.5 S = 4 ⟹ S = 8 2.5S - 2S = 4 \implies 0.5S = 4 \implies S = 8 2.5 S − 2 S = 4 ⟹ 0.5 S = 4 ⟹ S = 8 .

Then R = 2.5 × 8 = 20 R = 2.5 \times 8 = 20 R = 2.5 × 8 = 20 .

A single unique age ( R = 20 R = 20 R = 20 ) is obtained. SUFFICIENT .

Final Answer: BOTH Statement (I) and Statement (II) TOGETHER are necessary (Option 4) .

Worked Example 2: Yes/No Number System Question

Question Stem : Is the integer n n n an even number?

Statement I : n 2 + 1 n^2 + 1 n 2 + 1 is an odd integer.

Statement II : 3 n 3n 3 n is an even integer.

Step-by-step Evaluation :

Test Statement I alone :

If n 2 + 1 = odd n^2 + 1 = \text{odd} n 2 + 1 = odd , then n 2 = odd − 1 = even n^2 = \text{odd} - 1 = \text{even} n 2 = odd − 1 = even .

Since the square of an integer is even if and only if the integer itself is even, n n n must be even .

Yields a definitive "ALWAYS YES" . SUFFICIENT .

Test Statement II alone :

If 3 n = even 3n = \text{even} 3 n = even , since 3 3 3 is an odd integer, the product can only be even if n n n is even .

Yields a definitive "ALWAYS YES" . SUFFICIENT .

Final Answer: EITHER Statement (I) ALONE or Statement (II) ALONE is sufficient (Option 3) .

Advanced 3-Statement Data Sufficiency (SBI PO Mains)

In SBI PO Mains, questions contain Statements I, II, and III. The options present combination patterns:

  • Statements I and II together
  • Statements II and III together
  • Statements I and III together
  • All three statements together
  • Worked Example 3: 3-Statement Work & Time Problem

Question Stem : In how many days can 10 men and 8 women complete a construction project?

Statement I : 5 men can complete the project in 12 days.

Statement II : 8 women can complete the project in 15 days.

Statement III : 6 children can complete the project in 20 days.

Step-by-step Evaluation :

Total Work required is constant ( W W W ).

Statement I gives 1 man’s daily work = W / ( 5 × 12 ) = W / 60 1 \text{ man's daily work} = W / (5 \times 12) = W / 60 1 man’s daily work = W / ( 5 × 12 ) = W /60 .

Statement II gives 1 woman’s daily work = W / ( 8 × 15 ) = W / 120 1 \text{ woman's daily work} = W / (8 \times 15) = W / 120 1 woman’s daily work = W / ( 8 × 15 ) = W /120 .

Statement III gives 1 child’s daily work = W / ( 6 × 20 ) = W / 120 1 \text{ child's daily work} = W / (6 \times 20) = W / 120 1 child’s daily work = W / ( 6 × 20 ) = W /120 .

To answer the question stem, we need the combined daily rate of 10 men and 8 women .

Combining Statement I and Statement II: Combined Rate = 10 × ( W 60 ) + 8 × ( W 120 ) = W 6 + W 15 = 7 W 30 \text{Combined Rate} = 10 \times \left(\frac{W}{60}\right) + 8 \times \left(\frac{W}{120}\right) = \frac{W}{6} + \frac{W}{15} = \frac{7W}{30} Combined Rate = 10 × ( 60 W ​ ) + 8 × ( 120 W ​ ) = 6 W ​ + 15 W ​ = 30 7 W ​ Days required = W 7 W / 30 = 30 7 days \text{Days required} = \frac{W}{7W/30} = \frac{30}{7} \text{ days} Days required = 7 W /30 W ​ = 7 30 ​ days

Statement III (children) is entirely unnecessary.

Final Answer: Statements (I) and (II) together are sufficient .

Top 4 Candidate Traps in Data Sufficiency

Carryover Contamination Trap : Bringing data from Statement I into your evaluation of Statement II. Always mentally reset to zero before inspecting Statement II.

Over-Calculation Wasted Time : Calculating exact numerical values when data sufficiency is already established by linear independent equations.

Unstated Assumptions Trap : Assuming x x x is positive or an integer. Unless specified, x x x can be negative, zero, or a fraction.

Quadratic Multiplicity Trap : x 2 = 25 x^2 = 25 x 2 = 25 yields x = 5 x = 5 x = 5 or x = − 5 x = -5 x = − 5 . This is INSUFFICIENT for value questions unless a constraint (e.g., x > 0 x > 0 x > 0 ) is provided.