Study guide

11.3 Wastewater Process Testing & Analytical Methods

South Carolina Water/Wastewater Operator Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: South Carolina Regulations & Licensing Framework

1.1 SC Environmental Certification Board & Chapter 51 Regulations 1.2 Certification Levels & Experience Requirements 1.3 Facility Classifications & Operator-in-Charge Duties 1.4 Exam Logistics, Scoring & Study Resources

2 Chapter 2: Source Water Characteristics

2.1 Raw Water Sources & Pretreatment 2.2 Groundwater Sources, Wells & GWUDI Determinations 2.3 Watershed Protection & Source Water Contaminants

3 Chapter 3: Water Treatment: Coagulation, Flocculation & Sedimentation

3.1 Coagulation & Flocculation Process Control 3.2 Sedimentation Basins & Clarification

4 Chapter 4: Water Treatment: Filtration

4.1 Granular Media & Membrane Filtration 4.2 Filter Operation, Backwash & Troubleshooting

5 Chapter 5: Water Treatment: Disinfection & Chemical Conditioning

5.1 Chlorination & Chemical Disinfection 5.2 CT Calculations & Disinfection Byproducts Compliance 5.3 Chloramines, Chlorine Dioxide, Ozone & UV 5.4 Corrosion Control & the Lead and Copper Rule 5.5 Fluoridation & Water Softening 5.6 Iron, Manganese, Taste & Odor Control

6 Chapter 6: Water Distribution Systems

6.1 Water Distribution Network Operations & Maintenance 6.2 Cross-Connection Control & Backflow Prevention 6.3 Distribution Hydraulics & Pressure Management 6.4 Pipes, Valves, Hydrants & Appurtenances 6.5 Storage Tanks & Reservoirs 6.6 Water Quality in Distribution: Flushing & Residual Management 6.7 Main Disinfection, Breaks & Repair

7 Chapter 7: Wastewater Collection & Preliminary Treatment

7.1 Wastewater Collection & Preliminary Operations 7.2 Sanitary Sewer Collection System Maintenance 7.3 Lift Station Pumps, Controls & Hydraulics

8 Chapter 8: Wastewater Treatment: Primary & Secondary

8.1 Wastewater Characteristics & Plant Loadings 8.2 Primary Sedimentation & Clarifier Operations 8.3 Activated Sludge Process Control & Operations 8.4 Activated Sludge Troubleshooting 8.5 Aeration Systems & Dissolved Oxygen Control 8.6 Fixed-Film & Lagoon Treatment Systems 8.7 Biological Nutrient Removal & Tertiary Treatment

9 Chapter 9: Wastewater Disinfection, Effluent & Industrial Treatment

9.1 Wastewater Disinfection & Dechlorination 9.2 Effluent Disposal, Reuse & Land Application 9.3 Physical/Chemical Industrial Wastewater Treatment 9.4 Industrial Pretreatment Programs

10 Chapter 10: Solids, Biosolids & Regulatory Permitting

10.1 Sludge Thickening, Digestion & Dewatering 10.2 Biosolids Stabilization & Part 503 Land Application 10.3 Clean Water Act & NPDES Permit Compliance 10.4 Safe Drinking Water Act Compliance & Public Notification

11 Chapter 11: Laboratory Analysis & Quality Control

11.1 Sampling, Preservation & Chain of Custody 11.2 Physical & Chemical Water Quality Analysis 11.3 Wastewater Process Testing & Analytical Methods 11.4 Microbiological Testing & Quality Assurance 11.5 Data Validation, Reporting & Laboratory Certification

12 Chapter 12: Equipment Operation & Maintenance

12.1 Pumps: Types, Curves & Cavitation 12.2 Motors, Drives & Electrical Fundamentals 12.3 Bearings, Seals, Couplings & Lubrication 12.4 Flow Measurement & Process Instrumentation 12.5 Chemical Feed Equipment & Calibration 12.6 SCADA, Controls & Preventive Maintenance Programs

13 Chapter 13: Safety, Security & Administrative Procedures

13.1 Confined Space Entry & Atmospheric Hazards 13.2 Chlorine Gas Safety & Emergency Response 13.3 Lockout/Tagout, PPE, Hazard Communication & Excavation 13.4 Security, Vulnerability Assessment & Emergency Response Planning 13.5 Recordkeeping, Reporting & Administrative Duties

14 Chapter 14: Process Calculations & Hydraulic Math

14.1 Basic Water & Wastewater Math Fundamentals 14.2 Chemical Feed Rate & Dosage Calculations 14.3 Detention Time & Volumetric Flow Calculations 14.4 Removal Efficiency & Process Loading Rates 14.5 Pump Hydraulics & Horsepower Calculations 14.6 Activated Sludge Process Control Math

11.3 Wastewater Process Testing & Analytical Methods

Key Takeaways Explain This Topic AI

Dissolved Oxygen (DO) is determined using the azide modification of the Winkler titration or luminescent optical DO probes, which eliminate chemical interferences and sample oxygen consumption.

BOD5 testing requires a 5-day dark incubation at 20°C ± 1°C, with valid tests satisfying a DO depletion of at least 2.0 mg/L and a residual DO of at least 1.0 mg/L.

COD testing utilizes closed reflux potassium dichromate digestion in strong sulfuric acid at 150°C for 2 hours, yielding results in 2 hours with COD:BOD5 ratios typically ranging from 1.5 to 2.5.

Total Suspended Solids (TSS) are measured gravimetrically after drying glass fiber filters at 103–105°C, while Volatile Suspended Solids (VSS) are ignited in a muffle furnace at 550°C.

Sludge Volume Index (SVI) evaluates activated sludge settleability by combining 30-minute Imhoff cone/settling cylinder volumes with mixed liquor TSS concentration, where values between 80 and 120 mL/g indicate good settling and values above 150 mL/g indicate filamentous bulking.

Last updated: August 2026

9.2 Wastewater Process Testing & Analytical Methods

Wastewater laboratory analytics provide essential process parameters for managing activated sludge plants, trickling filters, anaerobic digesters, and regulatory discharge monitoring under South Carolina NPDES permits. Operators must master test mechanics, quality assurance standards, and mathematical relationships to maintain compliance and optimize operations.

Dissolved Oxygen (DO) Analytical Procedures

Dissolved oxygen is a fundamental driver of aerobic wastewater treatment processes and receiving stream health.

Azide Modification of the Winkler Titration

The azide modification of the Winkler method is the classical chemical titrimetric standard for measuring DO. It is particularly suited for samples containing nitrite ( NO 2 − \text{NO}_2^- NO 2 − ​ ), which interferes with standard iodometric methods.

Fixation: Sample collected in a 300 mL glass-stoppered BOD bottle without turbulence or entrained air. Add 1.0 mL Manganous Sulfate ( MnSO 4 \text{MnSO}_4 MnSO 4 ​ ) solution followed by 1.0 mL Alkali-Iodide-Azide ( NaOH-KI-NaN 3 \text{NaOH-KI-NaN}_3 NaOH-KI-NaN 3 ​ ) reagent below the liquid surface. Stopper and invert repeatedly. Manganous ions react with dissolved oxygen under alkaline conditions to form a brownish precipitate of manganese hydroxide ( MnO(OH) 2 \text{MnO(OH)}_2 MnO(OH) 2 ​ ). If oxygen is absent, a white precipitate forms ( Mn(OH) 2 \text{Mn(OH)}_2 Mn(OH) 2 ​ ).

Acidification: After precipitate settles, add 1.0 mL concentrated Sulfuric Acid ( H 2 SO 4 \text{H}_2\text{SO}_4 H 2 ​ SO 4 ​ ) . Invert to dissolve precipitate. Acidification converts manganese oxide back to manganous ions, releasing free iodine ( I 2 \text{I}_2 I 2 ​ ) in an amount chemically equivalent to the original dissolved oxygen.

Titration: A 200 mL sample aliquot is titrated with standard 0.025 N Sodium Thiosulfate ( Na 2 S 2 O 3 \text{Na}_2\text{S}_2\text{O}_3 Na 2 ​ S 2 ​ O 3 ​ ) . Near the end point (pale yellow), 2 mL of starch indicator solution is added, turning the solution dark blue. Titration continues until the blue color turns completely colorless.

Stoichiometric Ratio: For a 200 mL sample titrated with 0.025 N thiosulfate, 1.0 mL titrant = 1.0 mg/L dissolved oxygen .

Optical / Luminescent DO Probes

Modern wastewater laboratories predominantly use Luminescent Dissolved Oxygen (LDO) optical probes.

Mechanism: A blue LED illuminates a ruthenium-based luminescent sensor cap. Oxygen molecules quench the excited state of the ruthenium dye, reducing the intensity and phase shift of emitted red light. The phase shift is inversely proportional to dissolved oxygen concentration.

Operational Advantages: Optical probes do not consume oxygen during measurement (unlike polarographic membrane probes), require zero sample flow/stirring, exhibit minimal calibration drift, and are immune to poisoning by hydrogen sulfide ( H 2 S \text{H}_2\text{S} H 2 ​ S ) or heavy metals. Probes are calibrated daily against water-saturated air or air-saturated water at known barometric pressure.

Biochemical Oxygen Demand ( BOD 5 \text{BOD}_5 BOD 5 ​ )

Biochemical Oxygen Demand ( BOD 5 \text{BOD}_5 BOD 5 ​ ) measures the amount of dissolved oxygen consumed by microorganisms to biochemically oxidize organic matter over a 5-day incubation period at 20°C ± 1 ∘ C \pm 1^\circ\text{C} ± 1 ∘ C in complete darkness . Darkness prevents photosynthetic oxygen production by algae.

Unseeded BOD Calculation Formula

When analyzing raw or settled municipal wastewater containing abundant native bacteria: BOD 5 (mg/L) = DO i − DO f P \text{BOD}_5 \text{ (mg/L)} = \frac{\text{DO}_i - \text{DO}_f}{P} BOD 5 ​ (mg/L) = P DO i ​ − DO f ​ ​

where:

  • DO i \text{DO}_i DO i ​ = Initial dissolved oxygen of diluted sample (mg/L)
  • DO f \text{DO}_f DO f ​ = Final dissolved oxygen after 5 days (mg/L)

(P) = Decimal fraction of sample volume ( V sample / 300 mL V_{\text{sample}} / 300 \text{ mL} V sample ​ /300 mL )

Seeded BOD Calculation Formula

For disinfected effluents, industrial wastes, or high-temperature samples lacking viable bacteria, seed microorganisms (such as settled raw domestic wastewater) must be added: BOD 5 (mg/L) = ( DO i − DO f ) − ( B i − B f ) × f P \text{BOD}_5 \text{ (mg/L)} = \frac{(\text{DO}_i - \text{DO}_f) - (B_i - B_f) \times f}{P} BOD 5 ​ (mg/L) = P ( DO i ​ − DO f ​ ) − ( B i ​ − B f ​ ) × f ​

where:

  • B i B_i B i ​ = Initial DO of the seed blank (mg/L)
  • B f B_f B f ​ = Final DO of the seed blank after 5 days (mg/L)
  • (f) = Ratio of seed volume in sample bottle to seed volume in seed blank bottle
  • QA/QC Acceptance Criteria for BOD5

SC DES mandates strict quality criteria for valid BOD 5 \text{BOD}_5 BOD 5 ​ reporting:

Minimum DO Depletion: The sample dilution must consume at least 2.0 mg/L DO over the 5-day incubation ( DO i − DO f ≥ 2.0 mg/L \text{DO}_i - \text{DO}_f \ge 2.0 \text{ mg/L} DO i ​ − DO f ​ ≥ 2.0 mg/L ).

Minimum Residual DO: The sample must retain a final DO of at least 1.0 mg/L on day 5 ( DO f ≥ 1.0 mg/L \text{DO}_f \ge 1.0 \text{ mg/L} DO f ​ ≥ 1.0 mg/L ).

Dilution Water Blank: Unseeded dilution water blank depletion must not exceed 0.2 mg/L over 5 days.

Glucose-Glutamic Acid (GGA) Check Standard: A standard mixture containing 150 mg/L glucose and 150 mg/L glutamic acid must be analyzed with each batch. The 5-day BOD of GGA must fall within 198 ± 30.5 mg/L 198 \pm 30.5 \text{ mg/L} 198 ± 30.5 mg/L (167.5 to 228.5 mg/L).

Chemical Oxygen Demand (COD)

Chemical Oxygen Demand (COD) measures the oxygen equivalent of organic matter susceptible to chemical oxidation by a strong oxidant.

Digestion Chemistry: Sample is digested in closed glass vials with Potassium Dichromate ( K 2 Cr 2 O 7 \text{K}_2\text{Cr}_2\text{O}_7 K 2 ​ Cr 2 ​ O 7 ​ ) in concentrated Sulfuric Acid ( H 2 SO 4 \text{H}_2\text{SO}_4 H 2 ​ SO 4 ​ ) containing Silver Sulfate ( Ag 2 SO 4 \text{Ag}_2\text{SO}_4 Ag 2 ​ SO 4 ​ ) catalyst and Mercuric Sulfate ( HgSO 4 \text{HgSO}_4 HgSO 4 ​ ) (to eliminate chloride ion interference). Vials are heated at 150°C for 2 hours in a block digester.

Measurement: Reduced trivalent chromium ( Cr 3 + \text{Cr}^{3+} Cr 3 + ) is measured spectrophotometrically at 600 nm, or remaining hexavalent chromium ( Cr 6 + \text{Cr}^{6+} Cr 6 + ) is measured at 420 nm.

COD vs. BOD5 Ratio: Because dichromate oxidizes nearly all organic compounds (including non-biodegradable cellulose and lignin), COD is always greater than BOD 5 \text{BOD}_5 BOD 5 ​ . For typical municipal raw wastewater, the COD : BOD 5 \text{COD}:\text{BOD}_5 COD : BOD 5 ​ ratio ranges between 1.5:1 and 2.5:1 . Ratios above 3.0 indicate toxic industrial discharges or non-biodegradable organic loads. COD yields results in 2 hours, making it ideal for rapid process control.

Suspended & Volatile Solids Analysis

Solids monitoring quantifies particulate loading across treatment units.

Total Suspended Solids (TSS)

Filtering: A measured volume of wastewater is drawn through a pre-washed, dried, and tared glass fiber filter disk (Grade 934-AH or GF/C, nominal 1.5 μ m \mu\text{m} μ m pore size) under vacuum.

Drying: Filter disk is placed in an aluminum dish and dried in a drying oven at 103°C to 105°C for 1 hour .

Desiccation & Weighing: Cooled in a desiccator to room temperature and weighed on an analytical balance (precision 0.1 mg).

TSS Calculation: TSS (mg/L) = ( A − B ) × 1 , 000 , 000 V sample \text{TSS (mg/L)} = \frac{(A - B) \times 1,000,000}{V_{\text{sample}}} TSS (mg/L) = V sample ​ ( A − B ) × 1 , 000 , 000 ​

where (A) = final weight of filter + dried residue (grams), (B) = tare weight of filter (grams), and V sample V_{\text{sample}} V sample ​ = sample volume in mL.

Volatile Suspended Solids (VSS)

Ignition: The dried TSS filter disk is placed in a muffle furnace at 550°C ± 50 ∘ C \pm 50^\circ\text{C} ± 5 0 ∘ C for 15 to 20 minutes .

Mechanism: Organic particulate matter burns off as CO 2 \text{CO}_2 CO 2 ​ and H 2 O \text{H}_2\text{O} H 2 ​ O , leaving inorganic fixed suspended solids (FSS/ash).

VSS Calculation: VSS (mg/L) = ( A − C ) × 1 , 000 , 000 V sample \text{VSS (mg/L)} = \frac{(A - C) \times 1,000,000}{V_{\text{sample}}} VSS (mg/L) = V sample ​ ( A − C ) × 1 , 000 , 000 ​

where (C) = weight of filter + ash after ignition at 550°C (grams). The VSS / TSS \text{VSS}/\text{TSS} VSS / TSS ratio indicates the active biological organic fraction of mixed liquor (typically 75% to 85% in active MLSS).

  • Process Control Settleability & SVI
  • Settleable Solids & Imhoff Cone

Settleable solids represent particulate matter that settles out of suspension under quiescent conditions within 1 hour. A 1.0-Liter Imhoff cone is filled to the 1 L mark. Sample settles for 45 minutes , is gently stirred along the side walls with a glass rod to dislodge adhering solids, and settles for an additional 15 minutes (total 60 minutes). Results are read directly from the cone graduations in mL/L .

Sludge Volume Index (SVI)

Sludge Volume Index (SVI) quantifies the settling characteristics and compactness of activated sludge solids. It represents the volume in mL occupied by 1 gram of mixed liquor suspended solids after 30 minutes of settling in a 1,000 mL graduated cylinder. SVI (mL/g) = 30-minute Settled Sludge Volume (mL/L) × 1 , 000 MLSS TSS (mg/L) \text{SVI (mL/g)} = \frac{\text{30-minute Settled Sludge Volume (mL/L)} \times 1,000}{\text{MLSS TSS (mg/L)}} SVI (mL/g) = MLSS TSS (mg/L) 30-minute Settled Sludge Volume (mL/L) × 1 , 000 ​

  • SVI Range (mL/g) Sludge Character & Operating Condition Operational Risk / Action
  • < 80 Fast settling, dense, small compact pin-floc High turbidity supernatant; pin floc escapes weir

80 – 120 Target band , well-structured floc, clear supernatant Optimum clarifier performance; stable return sludge

  • 120 – 150 Marginal — settles, but compacts poorly Early filament warning; verify DO, F/M, and nutrients
  • > 150 Slow settling, filamentous bulking, low density Clarifier solids blanket rises; risk of sludge loss

Loading diagram... Wastewater Laboratory Process Testing Workflow

Sludge Volume Index (SVI) Settling Ranges (mL/g)