Study guide

14.4 Removal Efficiency & Process Loading Rates

South Carolina Water/Wastewater Operator Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: South Carolina Regulations & Licensing Framework

1.1 SC Environmental Certification Board & Chapter 51 Regulations 1.2 Certification Levels & Experience Requirements 1.3 Facility Classifications & Operator-in-Charge Duties 1.4 Exam Logistics, Scoring & Study Resources

2 Chapter 2: Source Water Characteristics

2.1 Raw Water Sources & Pretreatment 2.2 Groundwater Sources, Wells & GWUDI Determinations 2.3 Watershed Protection & Source Water Contaminants

3 Chapter 3: Water Treatment: Coagulation, Flocculation & Sedimentation

3.1 Coagulation & Flocculation Process Control 3.2 Sedimentation Basins & Clarification

4 Chapter 4: Water Treatment: Filtration

4.1 Granular Media & Membrane Filtration 4.2 Filter Operation, Backwash & Troubleshooting

5 Chapter 5: Water Treatment: Disinfection & Chemical Conditioning

5.1 Chlorination & Chemical Disinfection 5.2 CT Calculations & Disinfection Byproducts Compliance 5.3 Chloramines, Chlorine Dioxide, Ozone & UV 5.4 Corrosion Control & the Lead and Copper Rule 5.5 Fluoridation & Water Softening 5.6 Iron, Manganese, Taste & Odor Control

6 Chapter 6: Water Distribution Systems

6.1 Water Distribution Network Operations & Maintenance 6.2 Cross-Connection Control & Backflow Prevention 6.3 Distribution Hydraulics & Pressure Management 6.4 Pipes, Valves, Hydrants & Appurtenances 6.5 Storage Tanks & Reservoirs 6.6 Water Quality in Distribution: Flushing & Residual Management 6.7 Main Disinfection, Breaks & Repair

7 Chapter 7: Wastewater Collection & Preliminary Treatment

7.1 Wastewater Collection & Preliminary Operations 7.2 Sanitary Sewer Collection System Maintenance 7.3 Lift Station Pumps, Controls & Hydraulics

8 Chapter 8: Wastewater Treatment: Primary & Secondary

8.1 Wastewater Characteristics & Plant Loadings 8.2 Primary Sedimentation & Clarifier Operations 8.3 Activated Sludge Process Control & Operations 8.4 Activated Sludge Troubleshooting 8.5 Aeration Systems & Dissolved Oxygen Control 8.6 Fixed-Film & Lagoon Treatment Systems 8.7 Biological Nutrient Removal & Tertiary Treatment

9 Chapter 9: Wastewater Disinfection, Effluent & Industrial Treatment

9.1 Wastewater Disinfection & Dechlorination 9.2 Effluent Disposal, Reuse & Land Application 9.3 Physical/Chemical Industrial Wastewater Treatment 9.4 Industrial Pretreatment Programs

10 Chapter 10: Solids, Biosolids & Regulatory Permitting

10.1 Sludge Thickening, Digestion & Dewatering 10.2 Biosolids Stabilization & Part 503 Land Application 10.3 Clean Water Act & NPDES Permit Compliance 10.4 Safe Drinking Water Act Compliance & Public Notification

11 Chapter 11: Laboratory Analysis & Quality Control

11.1 Sampling, Preservation & Chain of Custody 11.2 Physical & Chemical Water Quality Analysis 11.3 Wastewater Process Testing & Analytical Methods 11.4 Microbiological Testing & Quality Assurance 11.5 Data Validation, Reporting & Laboratory Certification

12 Chapter 12: Equipment Operation & Maintenance

12.1 Pumps: Types, Curves & Cavitation 12.2 Motors, Drives & Electrical Fundamentals 12.3 Bearings, Seals, Couplings & Lubrication 12.4 Flow Measurement & Process Instrumentation 12.5 Chemical Feed Equipment & Calibration 12.6 SCADA, Controls & Preventive Maintenance Programs

13 Chapter 13: Safety, Security & Administrative Procedures

13.1 Confined Space Entry & Atmospheric Hazards 13.2 Chlorine Gas Safety & Emergency Response 13.3 Lockout/Tagout, PPE, Hazard Communication & Excavation 13.4 Security, Vulnerability Assessment & Emergency Response Planning 13.5 Recordkeeping, Reporting & Administrative Duties

14 Chapter 14: Process Calculations & Hydraulic Math

14.1 Basic Water & Wastewater Math Fundamentals 14.2 Chemical Feed Rate & Dosage Calculations 14.3 Detention Time & Volumetric Flow Calculations 14.4 Removal Efficiency & Process Loading Rates 14.5 Pump Hydraulics & Horsepower Calculations 14.6 Activated Sludge Process Control Math

14.4 Removal Efficiency & Process Loading Rates

Key Takeaways Explain This Topic AI

Treatment Process Removal Efficiency percentage is calculated using the formula: % Removal = ((Influent Concentration - Effluent Concentration) / Influent Concentration) × 100%.

Surface Overflow Rate (SOR) measures clarifier hydraulic loading per unit of surface area: SOR (gpd/sq ft) = Flow (gpd) / Surface Area (sq ft).

Weir Loading Rate (WLR) evaluates effluent weir hydraulic intensity: WLR (gpd/ft) = Flow (gpd) / Total Effluent Weir Length (ft).

Organic Loading Rate (OLR) quantifies mass BOD loading per unit of biological reactor volume: OLR = Lbs BOD/day / 1,000 cu ft of volume.

Food-to-Microorganism (F/M) ratio balances organic load against biological solids in activated sludge: F/M = Lbs BOD applied per day / Lbs MLVSS in aeration.

Last updated: August 2026

10.4 Removal Efficiency & Process Loading Rates

Evaluating the operational performance of water and wastewater treatment facilities requires continuous tracking of removal efficiencies and process loading parameters. Removal efficiency quantifies how effectively a process unit removes contaminants (e.g., total suspended solids, BOD, turbidity). Loading rates measure the hydraulic, organic, or solids mass applied to a specific unit area or volume, ensuring processes are operated within established engineering design limits.

1. Percent Removal Efficiency Calculations

Percent removal efficiency compares raw or influent contaminant concentration to treated or effluent concentration: Percent Removal (%) = Influent Concentration − Effluent Concentration Influent Concentration × 100 % \text{Percent Removal (\%)} = \frac{\text{Influent Concentration} - \text{Effluent Concentration}}{\text{Influent Concentration}} \times 100\% Percent Removal (%) = Influent Concentration Influent Concentration − Effluent Concentration ​ × 100% % Removal = ( In − Out In ) × 100 % \text{\% Removal} = \left(\frac{\text{In} - \text{Out}}{\text{In}}\right) \times 100\% % Removal = ( In In − Out ​ ) × 100%

Multi-Stage Removal Efficiency

When evaluating overall plant efficiency across sequential process units (e.g., primary settling followed by secondary biological treatment), operators must distinguish between unit process removal and overall plant removal .

Worked Example 1: Plant BOD and TSS Removal Efficiency

Problem: Raw wastewater entering a primary clarifier contains 240 mg/L of Total Suspended Solids (TSS). The primary clarifier effluent contains 120 mg/L of TSS, and the final secondary effluent discharged to the receiving stream contains 12 mg/L of TSS. Calculate:

The TSS removal efficiency of the primary clarifier.

The overall TSS removal efficiency of the treatment facility.

Solution Step-by-Step:

Primary Clarifier Removal Efficiency: Primary % Removal = ( 240 mg/L − 120 mg/L 240 mg/L ) × 100 % = ( 120 240 ) × 100 % = 50.0 % \text{Primary \% Removal} = \left(\frac{240\text{ mg/L} - 120\text{ mg/L}}{240\text{ mg/L}}\right) \times 100\% = \left(\frac{120}{240}\right) \times 100\% = 50.0\% Primary % Removal = ( 240 mg/L 240 mg/L − 120 mg/L ​ ) × 100% = ( 240 120 ​ ) × 100% = 50.0%

Overall Plant Removal Efficiency: Overall % Removal = ( 240 mg/L − 12 mg/L 240 mg/L ) × 100 % = ( 228 240 ) × 100 % = 95.0 % \text{Overall \% Removal} = \left(\frac{240\text{ mg/L} - 12\text{ mg/L}}{240\text{ mg/L}}\right) \times 100\% = \left(\frac{228}{240}\right) \times 100\% = 95.0\% Overall % Removal = ( 240 mg/L 240 mg/L − 12 mg/L ​ ) × 100% = ( 240 228 ​ ) × 100% = 95.0%

2. Clarifier Hydraulic Loading Rates

Clarifiers and sedimentation basins rely on gravity settling. If hydraulic loading rates exceed design limits, vertical fluid velocity overcomes particle settling velocity, washing solids over the effluent weirs.

A. Surface Overflow Rate (SOR)

Surface Overflow Rate (also called surface loading rate) measures the volume of liquid passing through each square foot of clarifier surface area per day: SOR (gpd/sq ft) = Flow Rate (gpd) Clarifier Surface Area (sq ft) \text{SOR (gpd/sq ft)} = \frac{\text{Flow Rate (gpd)}}{\text{Clarifier Surface Area (sq ft)}} SOR (gpd/sq ft) = Clarifier Surface Area (sq ft) Flow Rate (gpd) ​

Typical Clarifier SOR Design Standards:

  • Primary Clarifiers : 600 to 1,200 gpd/sq ft
  • Secondary Clarifiers (Activated Sludge) : 400 to 800 gpd/sq ft
  • High-Rate Water Settlers (Tube/Plate) : 1.0 to 2.0 gpm/sq ft (1,440 to 2,880 gpd/sq ft)
  • Worked Example 2: Circular Clarifier Overflow Rate

Problem: A circular secondary clarifier with a diameter of 50 feet receives a daily wastewater flow of 1.5 MGD. Calculate the Surface Overflow Rate in gallons per day per square foot (gpd/sq ft).

Solution Step-by-Step:

Calculate clarifier surface area: Surface Area = 0.785 × ( 50 ft ) 2 = 0.785 × 2 , 500 = 1 , 962.5 sq ft \text{Surface Area} = 0.785 \times (50\text{ ft})^2 = 0.785 \times 2,500 = 1,962.5\text{ sq ft} Surface Area = 0.785 × ( 50 ft ) 2 = 0.785 × 2 , 500 = 1 , 962.5 sq ft

Calculate Surface Overflow Rate: SOR = 1 , 500 , 000 gpd 1 , 962.5 sq ft = 764.33 gpd/sq ft \text{SOR} = \frac{1,500,000\text{ gpd}}{1,962.5\text{ sq ft}} = 764.33\text{ gpd/sq ft} SOR = 1 , 962.5 sq ft 1 , 500 , 000 gpd ​ = 764.33 gpd/sq ft

Result: The SOR of 764.3 gpd/sq ft falls within standard secondary design limits (400-800 gpd/sq ft).

B. Weir Loading Rate (WLR)

Weir Loading Rate evaluates the volume of flow passing over each linear foot of effluent weir per day. Excessive weir loading causes high localized exit velocities (weir pulling), causing light sludge pin-floc to carry over into effluent channels. WLR (gpd/linear ft) = Flow Rate (gpd) Total Weir Length (feet) \text{WLR (gpd/linear ft)} = \frac{\text{Flow Rate (gpd)}}{\text{Total Weir Length (feet)}} WLR (gpd/linear ft) = Total Weir Length (feet) Flow Rate (gpd) ​

For rectangular tanks with end weirs: Weir Length = Width of Tank (ft) \text{Weir Length} = \text{Width of Tank (ft)} Weir Length = Width of Tank (ft) .

For circular tanks with peripheral launders: Weir Length = π × Weir Diameter (ft) = 3.1416 × D \text{Weir Length} = \pi \times \text{Weir Diameter (ft)} = 3.1416 \times D Weir Length = π × Weir Diameter (ft) = 3.1416 × D .

Standard WLR Limits:

  • Standard Clarifiers : ≤ 10,000 to 15,000 gpd/ft
  • High-Rate Clarifiers with Finger Launders : ≤ 20,000 gpd/ft
  • Worked Example 3: Circular Clarifier Weir Loading Rate

Problem: A circular clarifier has a perimeter effluent weir located 2 feet inside the outer 54-foot diameter tank wall (weir diameter = 50 feet). The clarifier treats a flow of 2.2 MGD. Calculate the Weir Loading Rate in gpd per linear foot.

Solution Step-by-Step:

Calculate total peripheral weir length: Weir Length = 3.1416 × 50 ft = 157.08 linear feet \text{Weir Length} = 3.1416 \times 50\text{ ft} = 157.08\text{ linear feet} Weir Length = 3.1416 × 50 ft = 157.08 linear feet

Calculate Weir Loading Rate: WLR = 2 , 200 , 000 gpd 157.08 ft = 14 , 005.6 gpd/ft \text{WLR} = \frac{2,200,000\text{ gpd}}{157.08\text{ ft}} = 14,005.6\text{ gpd/ft} WLR = 157.08 ft 2 , 200 , 000 gpd ​ = 14 , 005.6 gpd/ft

3. Biological Process Loading Rates

Biological wastewater treatment processes (activated sludge, trickling filters, RBCs) rely on controlled loading metrics to maintain organic conversion and settling characteristics.

A. Organic Loading Rate (OLR)

Organic Loading Rate quantifies the daily organic mass (BOD or COD) applied per unit volume of biological reactor: OLR (lbs BOD/1,000 cu ft/day) = BOD Mass Applied (lbs BOD/day) Reactor Volume (in 1,000 cu ft units) \text{OLR (lbs BOD/1,000 cu ft/day)} = \frac{\text{BOD Mass Applied (lbs BOD/day)}}{\text{Reactor Volume (in 1,000 cu ft units)}} OLR (lbs BOD/1,000 cu ft/day) = Reactor Volume (in 1,000 cu ft units) BOD Mass Applied (lbs BOD/day) ​ Lbs BOD/day = Flow (MGD) × Influent BOD (mg/L) × 8.34 \text{Lbs BOD/day} = \text{Flow (MGD)} \times \text{Influent BOD (mg/L)} \times 8.34 Lbs BOD/day = Flow (MGD) × Influent BOD (mg/L) × 8.34

B. Food-to-Microorganism Ratio (F/M Ratio)

The F/M Ratio is the key operational control parameter in the activated sludge process. It compares the daily organic food supply (lbs BOD/day) entering the aeration tank to the total active biological population (lbs MLVSS) inside the aeration basin. F/M Ratio = Lbs BOD applied per day Lbs MLVSS under aeration \text{F/M Ratio} = \frac{\text{Lbs BOD applied per day}}{\text{Lbs MLVSS under aeration}} F/M Ratio = Lbs MLVSS under aeration Lbs BOD applied per day ​ F/M Ratio = Flow (MGD) × Primary Effluent BOD (mg/L) × 8.34 Aeration Volume (MG) × MLVSS Concentration (mg/L) × 8.34 \text{F/M Ratio} = \frac{\text{Flow (MGD)} \times \text{Primary Effluent BOD (mg/L)} \times 8.34}{\text{Aeration Volume (MG)} \times \text{MLVSS Concentration (mg/L)} \times 8.34} F/M Ratio = Aeration Volume (MG) × MLVSS Concentration (mg/L) × 8.34 Flow (MGD) × Primary Effluent BOD (mg/L) × 8.34 ​ F/M Ratio = Flow (MGD) × BOD (mg/L) Aeration Volume (MG) × MLVSS (mg/L) \text{F/M Ratio} = \frac{\text{Flow (MGD)} \times \text{BOD (mg/L)}}{\text{Aeration Volume (MG)} \times \text{MLVSS (mg/L)}} F/M Ratio = Aeration Volume (MG) × MLVSS (mg/L) Flow (MGD) × BOD (mg/L) ​

Standard F/M Target Operational Ranges:

  • Conventional Activated Sludge : 0.20 to 0.50 lbs BOD/lb MLVSS/day
  • Extended Aeration : 0.05 to 0.15 lbs BOD/lb MLVSS/day
  • High-Rate Activated Sludge : 0.50 to 1.50 lbs BOD/lb MLVSS/day
  • Worked Example 4: F/M Ratio Calculation

Problem: An activated sludge aeration tank with a volume of 0.50 MG treats a flow rate of 1.0 MGD. The primary effluent BOD concentration is 150 mg/L, and the Mixed Liquor Volatile Suspended Solids (MLVSS) concentration inside the aeration tank is 2,000 mg/L. Calculate the operational F/M ratio.

Solution Step-by-Step:

Calculate daily BOD mass applied (Food): Lbs BOD/day = 1.0 MGD × 150 mg/L × 8.34 = 1 , 251 lbs BOD/day \text{Lbs BOD/day} = 1.0\text{ MGD} \times 150\text{ mg/L} \times 8.34 = 1,251\text{ lbs BOD/day} Lbs BOD/day = 1.0 MGD × 150 mg/L × 8.34 = 1 , 251 lbs BOD/day

Calculate total MLVSS mass under aeration (Microorganisms): Lbs MLVSS = 0.50 MG × 2 , 000 mg/L × 8.34 = 8 , 340 lbs MLVSS \text{Lbs MLVSS} = 0.50\text{ MG} \times 2,000\text{ mg/L} \times 8.34 = 8,340\text{ lbs MLVSS} Lbs MLVSS = 0.50 MG × 2 , 000 mg/L × 8.34 = 8 , 340 lbs MLVSS

Calculate F/M ratio: F/M Ratio = 1 , 251 lbs BOD/day 8 , 340 lbs MLVSS = 0.150 lbs BOD/lb MLVSS/day \text{F/M Ratio} = \frac{1,251\text{ lbs BOD/day}}{8,340\text{ lbs MLVSS}} = 0.150\text{ lbs BOD/lb MLVSS/day} F/M Ratio = 8 , 340 lbs MLVSS 1 , 251 lbs BOD/day ​ = 0.150 lbs BOD/lb MLVSS/day

Process Diagnosis: An F/M ratio of 0.15 is ideal for an extended aeration process or low-rate conventional system.

Loading diagram... Process Loading and Removal Efficiency Evaluation Points

Typical Surface Overflow Rate (SOR) Operational Ranges by Clarifier Type