Study guide
2.2 Groundwater Sources, Wells & GWUDI Determinations
South Carolina Water/Wastewater Operator Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: South Carolina Regulations & Licensing Framework
1.1 SC Environmental Certification Board & Chapter 51 Regulations 1.2 Certification Levels & Experience Requirements 1.3 Facility Classifications & Operator-in-Charge Duties 1.4 Exam Logistics, Scoring & Study Resources
2 Chapter 2: Source Water Characteristics
2.1 Raw Water Sources & Pretreatment 2.2 Groundwater Sources, Wells & GWUDI Determinations 2.3 Watershed Protection & Source Water Contaminants
3 Chapter 3: Water Treatment: Coagulation, Flocculation & Sedimentation
3.1 Coagulation & Flocculation Process Control 3.2 Sedimentation Basins & Clarification
4 Chapter 4: Water Treatment: Filtration
4.1 Granular Media & Membrane Filtration 4.2 Filter Operation, Backwash & Troubleshooting
5 Chapter 5: Water Treatment: Disinfection & Chemical Conditioning
5.1 Chlorination & Chemical Disinfection 5.2 CT Calculations & Disinfection Byproducts Compliance 5.3 Chloramines, Chlorine Dioxide, Ozone & UV 5.4 Corrosion Control & the Lead and Copper Rule 5.5 Fluoridation & Water Softening 5.6 Iron, Manganese, Taste & Odor Control
6 Chapter 6: Water Distribution Systems
6.1 Water Distribution Network Operations & Maintenance 6.2 Cross-Connection Control & Backflow Prevention 6.3 Distribution Hydraulics & Pressure Management 6.4 Pipes, Valves, Hydrants & Appurtenances 6.5 Storage Tanks & Reservoirs 6.6 Water Quality in Distribution: Flushing & Residual Management 6.7 Main Disinfection, Breaks & Repair
7 Chapter 7: Wastewater Collection & Preliminary Treatment
7.1 Wastewater Collection & Preliminary Operations 7.2 Sanitary Sewer Collection System Maintenance 7.3 Lift Station Pumps, Controls & Hydraulics
8 Chapter 8: Wastewater Treatment: Primary & Secondary
8.1 Wastewater Characteristics & Plant Loadings 8.2 Primary Sedimentation & Clarifier Operations 8.3 Activated Sludge Process Control & Operations 8.4 Activated Sludge Troubleshooting 8.5 Aeration Systems & Dissolved Oxygen Control 8.6 Fixed-Film & Lagoon Treatment Systems 8.7 Biological Nutrient Removal & Tertiary Treatment
9 Chapter 9: Wastewater Disinfection, Effluent & Industrial Treatment
9.1 Wastewater Disinfection & Dechlorination 9.2 Effluent Disposal, Reuse & Land Application 9.3 Physical/Chemical Industrial Wastewater Treatment 9.4 Industrial Pretreatment Programs
10 Chapter 10: Solids, Biosolids & Regulatory Permitting
10.1 Sludge Thickening, Digestion & Dewatering 10.2 Biosolids Stabilization & Part 503 Land Application 10.3 Clean Water Act & NPDES Permit Compliance 10.4 Safe Drinking Water Act Compliance & Public Notification
11 Chapter 11: Laboratory Analysis & Quality Control
11.1 Sampling, Preservation & Chain of Custody 11.2 Physical & Chemical Water Quality Analysis 11.3 Wastewater Process Testing & Analytical Methods 11.4 Microbiological Testing & Quality Assurance 11.5 Data Validation, Reporting & Laboratory Certification
12 Chapter 12: Equipment Operation & Maintenance
12.1 Pumps: Types, Curves & Cavitation 12.2 Motors, Drives & Electrical Fundamentals 12.3 Bearings, Seals, Couplings & Lubrication 12.4 Flow Measurement & Process Instrumentation 12.5 Chemical Feed Equipment & Calibration 12.6 SCADA, Controls & Preventive Maintenance Programs
13 Chapter 13: Safety, Security & Administrative Procedures
13.1 Confined Space Entry & Atmospheric Hazards 13.2 Chlorine Gas Safety & Emergency Response 13.3 Lockout/Tagout, PPE, Hazard Communication & Excavation 13.4 Security, Vulnerability Assessment & Emergency Response Planning 13.5 Recordkeeping, Reporting & Administrative Duties
14 Chapter 14: Process Calculations & Hydraulic Math
14.1 Basic Water & Wastewater Math Fundamentals 14.2 Chemical Feed Rate & Dosage Calculations 14.3 Detention Time & Volumetric Flow Calculations 14.4 Removal Efficiency & Process Loading Rates 14.5 Pump Hydraulics & Horsepower Calculations 14.6 Activated Sludge Process Control Math
2.2 Groundwater Sources, Wells & GWUDI Determinations
Key Takeaways Explain This Topic AI
Confined aquifers sit beneath a confining layer and are better protected than unconfined water-table aquifers, which recharge directly from the surface.
Drawdown is static level minus pumping level, and specific capacity is well yield in gpm divided by drawdown in feet.
A falling specific capacity over time signals well screen encrustation, biofouling, or aquifer decline and is the primary well performance trend an operator tracks.
A GWUDI determination reclassifies a well as surface water, triggering filtration and CT disinfection requirements and moving the plant into a higher facility group.
South Carolina wells must be constructed by a licensed well driller, and the Board requires well drillers to carry a $25,000 surety bond.
Last updated: August 2026
2.2 Groundwater Sources, Wells & GWUDI Determinations
Source Water Characteristics is a full content area on the standardized water treatment exam, and in South Carolina the majority of public water systems are groundwater systems. A Group I or Group II plant may be nothing more than a well, a hypochlorite feed, and a hydropneumatic tank — but the operator is still expected to understand what the aquifer is doing and what the well is telling them.
1. Aquifer Types
Type Structure Operating implications
Unconfined (water table) The top of the saturated zone is at atmospheric pressure; recharge comes directly from precipitation infiltrating above Shallower, cheaper to drill, far more vulnerable to surface contamination , water levels respond quickly to drought and rainfall
Confined (artesian) Sandwiched between low-permeability confining layers; water is under pressure greater than atmospheric Better natural protection, more consistent temperature and chemistry, but slower to recharge and prone to long-term drawdown from regional pumping
In a confined aquifer the water rises in the casing above the top of the aquifer to the potentiometric surface . If that surface is above ground level, the well flows without pumping — a true artesian well.
Typical groundwater quality signature: low turbidity, low or absent bacteriological contamination, stable temperature, but frequently elevated hardness, iron, manganese, carbon dioxide, and hydrogen sulfide , and sometimes naturally occurring radionuclides or arsenic. Groundwater is often anoxic , which is precisely why iron and manganese stay dissolved until you aerate or oxidize.
2. Well Construction and Protection
A properly constructed well is the first barrier against contamination. Key elements:
Casing — seals the borehole from surface water and shallow contaminated zones.
Annular grout seal — cement or bentonite filling the space between the casing and the borehole wall. A failed grout seal is a direct conduit for surface contamination and is a common cause of unexplained coliform positives.
Sanitary well seal / cap — vermin-proof, with a screened, downturned vent .
Casing extension above grade with the surrounding ground sloped away so surface water drains off.
Well screen and gravel pack — sized to the aquifer material to admit water while excluding formation sand.
In South Carolina, only licensed well drillers may open or close water wells , with narrow statutory exceptions for government employees performing trained duties, property owners working on their own property, exploration borings, and licensed contractors drilling boreholes for water-level measurement, blasting, or short-term construction dewatering. Well drillers must furnish proof of a $25,000 surety bond to the Board.
- 3. The Two Measurements That Matter
- Static and pumping levels
Static water level — the level in the well after it has rested long enough to recover, measured from a fixed reference point.
Pumping (dynamic) water level — the level while the pump is running at a stated rate. Drawdown (ft) = Pumping Water Level − Static Water Level \text{Drawdown (ft)} = \text{Pumping Water Level} - \text{Static Water Level} Drawdown (ft) = Pumping Water Level − Static Water Level
Specific capacity — the well's report card Specific Capacity = Well Yield (gpm) Drawdown (ft) [ gpm ft ] \text{Specific Capacity} = \frac{\text{Well Yield (gpm)}}{\text{Drawdown (ft)}} \quad \left[\frac{\text{gpm}}{\text{ft}}\right] Specific Capacity = Drawdown (ft) Well Yield (gpm) [ ft gpm ]
Worked example. A well has a static level of 40 ft. Pumping at 350 gpm, the level stabilizes at 110 ft.
- Drawdown = 110 − 40 = 70 ft
- Specific capacity = 350 ÷ 70 = 5.0 gpm/ft
A year later the same well pumps 350 gpm at a pumping level of 180 ft:
- Drawdown = 180 − 40 = 140 ft
- Specific capacity = 350 ÷ 140 = 2.5 gpm/ft — a 50% loss
That is the diagnostic signal. Specific capacity trending down at a stable static level points at the well , not the aquifer.
Symptom Likely cause Response
Specific capacity falls, static level unchanged Screen encrustation (carbonate/iron scale) or biofouling (iron bacteria slime) Chemical and mechanical rehabilitation; acidize or chlorinate and redevelop
Both static and pumping levels fall over years Aquifer decline from regional overdraft or drought Reduce pumping, add a source, evaluate deeper zones
Sudden sand production Screen failure, gravel pack collapse, overpumping Reduce rate, inspect and repair; sand destroys pumps and meters
- Rapid drawdown then recovery Well interference from a nearby pumping well Stagger well run times
- 4. GWUDI — When Groundwater Stops Being Groundwater
Groundwater Under the Direct Influence of surface water (GWUDI) is a formal determination by the primacy agency that a well, spring, or infiltration gallery receives water from surface sources quickly enough that surface pathogens can reach it. Indicators include:
Significant occurrence of insects or other macroorganisms, algae, or large-diameter pathogens such as Giardia lamblia or Cryptosporidium .
Significant and relatively rapid shifts in water characteristics — turbidity, temperature, conductivity, or pH — that closely correlate with rainfall or nearby surface water conditions .
Shallow construction, proximity to a stream or lake, or fractured or karst geology providing a short travel path.
Why the determination is a big deal
A GWUDI source is regulated as surface water . That means the Surface Water Treatment Rule applies: the system must provide filtration and disinfection , meet combined filter effluent turbidity limits , and demonstrate CT-based log inactivation credit for Giardia and viruses. Operationally it also moves the plant up the South Carolina group ladder — a well that was a Group II plant requiring a Class D operator becomes a surface water plant in Group IV, V, or VI, requiring Class C, B, or A depending on the treatment technology installed.
Exam framing: if a question describes a well whose turbidity spikes within hours of a rainstorm, or in which Giardia cysts or diatoms are detected, the expected answer involves a GWUDI determination and the imposition of surface water treatment requirements — not simply increasing the chlorine dose.