Study guide
8.7 Biological Nutrient Removal & Tertiary Treatment
South Carolina Water/Wastewater Operator Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: South Carolina Regulations & Licensing Framework
1.1 SC Environmental Certification Board & Chapter 51 Regulations 1.2 Certification Levels & Experience Requirements 1.3 Facility Classifications & Operator-in-Charge Duties 1.4 Exam Logistics, Scoring & Study Resources
2 Chapter 2: Source Water Characteristics
2.1 Raw Water Sources & Pretreatment 2.2 Groundwater Sources, Wells & GWUDI Determinations 2.3 Watershed Protection & Source Water Contaminants
3 Chapter 3: Water Treatment: Coagulation, Flocculation & Sedimentation
3.1 Coagulation & Flocculation Process Control 3.2 Sedimentation Basins & Clarification
4 Chapter 4: Water Treatment: Filtration
4.1 Granular Media & Membrane Filtration 4.2 Filter Operation, Backwash & Troubleshooting
5 Chapter 5: Water Treatment: Disinfection & Chemical Conditioning
5.1 Chlorination & Chemical Disinfection 5.2 CT Calculations & Disinfection Byproducts Compliance 5.3 Chloramines, Chlorine Dioxide, Ozone & UV 5.4 Corrosion Control & the Lead and Copper Rule 5.5 Fluoridation & Water Softening 5.6 Iron, Manganese, Taste & Odor Control
6 Chapter 6: Water Distribution Systems
6.1 Water Distribution Network Operations & Maintenance 6.2 Cross-Connection Control & Backflow Prevention 6.3 Distribution Hydraulics & Pressure Management 6.4 Pipes, Valves, Hydrants & Appurtenances 6.5 Storage Tanks & Reservoirs 6.6 Water Quality in Distribution: Flushing & Residual Management 6.7 Main Disinfection, Breaks & Repair
7 Chapter 7: Wastewater Collection & Preliminary Treatment
7.1 Wastewater Collection & Preliminary Operations 7.2 Sanitary Sewer Collection System Maintenance 7.3 Lift Station Pumps, Controls & Hydraulics
8 Chapter 8: Wastewater Treatment: Primary & Secondary
8.1 Wastewater Characteristics & Plant Loadings 8.2 Primary Sedimentation & Clarifier Operations 8.3 Activated Sludge Process Control & Operations 8.4 Activated Sludge Troubleshooting 8.5 Aeration Systems & Dissolved Oxygen Control 8.6 Fixed-Film & Lagoon Treatment Systems 8.7 Biological Nutrient Removal & Tertiary Treatment
9 Chapter 9: Wastewater Disinfection, Effluent & Industrial Treatment
9.1 Wastewater Disinfection & Dechlorination 9.2 Effluent Disposal, Reuse & Land Application 9.3 Physical/Chemical Industrial Wastewater Treatment 9.4 Industrial Pretreatment Programs
10 Chapter 10: Solids, Biosolids & Regulatory Permitting
10.1 Sludge Thickening, Digestion & Dewatering 10.2 Biosolids Stabilization & Part 503 Land Application 10.3 Clean Water Act & NPDES Permit Compliance 10.4 Safe Drinking Water Act Compliance & Public Notification
11 Chapter 11: Laboratory Analysis & Quality Control
11.1 Sampling, Preservation & Chain of Custody 11.2 Physical & Chemical Water Quality Analysis 11.3 Wastewater Process Testing & Analytical Methods 11.4 Microbiological Testing & Quality Assurance 11.5 Data Validation, Reporting & Laboratory Certification
12 Chapter 12: Equipment Operation & Maintenance
12.1 Pumps: Types, Curves & Cavitation 12.2 Motors, Drives & Electrical Fundamentals 12.3 Bearings, Seals, Couplings & Lubrication 12.4 Flow Measurement & Process Instrumentation 12.5 Chemical Feed Equipment & Calibration 12.6 SCADA, Controls & Preventive Maintenance Programs
13 Chapter 13: Safety, Security & Administrative Procedures
13.1 Confined Space Entry & Atmospheric Hazards 13.2 Chlorine Gas Safety & Emergency Response 13.3 Lockout/Tagout, PPE, Hazard Communication & Excavation 13.4 Security, Vulnerability Assessment & Emergency Response Planning 13.5 Recordkeeping, Reporting & Administrative Duties
14 Chapter 14: Process Calculations & Hydraulic Math
14.1 Basic Water & Wastewater Math Fundamentals 14.2 Chemical Feed Rate & Dosage Calculations 14.3 Detention Time & Volumetric Flow Calculations 14.4 Removal Efficiency & Process Loading Rates 14.5 Pump Hydraulics & Horsepower Calculations 14.6 Activated Sludge Process Control Math
8.7 Biological Nutrient Removal & Tertiary Treatment
Key Takeaways Explain This Topic AI
Nitrification is a two-step aerobic process by autotrophic bacteria (Nitrosomonas and Nitrobacter) that consumes 7.14 lbs of CaCO₃ alkalinity and 4.57 lbs of O₂ per lb of NH₄⁺-N oxidized.
Denitrification occurs under anoxic conditions (DO < 0.2 mg/L) where heterotrophic bacteria convert nitrate (NO₃⁻) to N₂ gas, recovering 3.57 lbs of CaCO₃ alkalinity per lb of NO₃⁻-N reduced.
Enhanced Biological Phosphorus Removal (EBPR) uses Polyphosphate Accumulating Organisms (PAOs) that store volatile fatty acids (VFAs) in an anaerobic zone and uptake orthophosphate in an aerobic zone.
Cloth media filters (5–10 µm) and deep-bed sand filters remove residual suspended solids prior to disinfection, with backwash cycles triggered by headloss or turbidity.
Effluent UV disinfection destroys microorganism DNA without chemical residuals, requiring minimum UV Transmittance (>65%) and routine quartz sleeve cleaning.
Last updated: August 2026
Biological Nitrogen Removal (BNR): Nitrification
Nitrification is the biological oxidation of ammonia-nitrogen ( NH 4 + − N \text{NH}_4^+-\text{N} NH 4 + − N ) to nitrite ( NO 2 − − N \text{NO}_2^--\text{N} NO 2 − − N ) and subsequently to nitrate ( NO 3 − − N \text{NO}_3^--\text{N} NO 3 − − N ). The process is carried out by obligate autotrophic nitrifying bacteria that derive energy from nitrogen oxidation and use inorganic carbon ( CO 2 \text{CO}_2 CO 2 or bicarbonate) for cell synthesis.
Two-Step Biochemical Reactions
Step 1: Ammonia Oxidation to Nitrite by Ammonia-Oxidizing Bacteria ( Nitrosomonas ): 2 NH 4 + + 3 O 2 → Nitrosomonas 2 NO 2 − + 4 H + + 2 H 2 O 2\text{NH}_4^+ + 3\text{O}_2 \xrightarrow{\text{Nitrosomonas}} 2\text{NO}_2^- + 4\text{H}^+ + 2\text{H}_2\text{O} 2 NH 4 + + 3 O 2 Nitrosomonas 2 NO 2 − + 4 H + + 2 H 2 O
Step 2: Nitrite Oxidation to Nitrate by Nitrite-Oxidizing Bacteria ( Nitrobacter / Nitrospira ): 2 NO 2 − + O 2 → Nitrobacter 2 NO 3 − 2\text{NO}_2^- + \text{O}_2 \xrightarrow{\text{Nitrobacter}} 2\text{NO}_3^- 2 NO 2 − + O 2 Nitrobacter 2 NO 3 −
Combined Nitrification Reaction : NH 4 + + 2 O 2 → NO 3 − + 2 H + + H 2 O \text{NH}_4^+ + 2\text{O}_2 \rightarrow \text{NO}_3^- + 2\text{H}^+ + \text{H}_2\text{O} NH 4 + + 2 O 2 → NO 3 − + 2 H + + H 2 O
Stoichiometric Operating Requirements
Oxygen Demand : Nitrification requires 4.57 lbs of O 2 4.57 \text{ lbs of O}_2 4.57 lbs of O 2 per lb of NH 4 + − N \text{NH}_4^+-\text{N} NH 4 + − N oxidized ( 3.43 lbs 3.43 \text{ lbs} 3.43 lbs for Nitrosomonas + 1.14 lbs + 1.14 \text{ lbs} + 1.14 lbs for Nitrobacter ).
Alkalinity Consumption : Nitrification releases hydrogen ions ( H + H^+ H + ), consuming 7.14 lbs of CaCO 3 alkalinity 7.14 \text{ lbs of CaCO}_3 \text{ alkalinity} 7.14 lbs of CaCO 3 alkalinity per lb of NH 4 + − N \text{NH}_4^+-\text{N} NH 4 + − N oxidized. If wastewater buffer capacity is insufficient, basin pH drops below 6.5 6.5 6.5 , severely inhibiting nitrifying activity.
Dissolved Oxygen Target : Maintain DO > 2.0 mg/L > 2.0 \text{ mg/L} > 2.0 mg/L in aerobic basins. Nitrifiers have a low affinity for oxygen and are easily outcompeted by heterotrophs at low DO.
Sludge Age (SRT / MCRT) : Autotrophic nitrifiers grow slowly. Requires a minimum SRT > 8 − 10 days > 8 - 10 \text{ days} > 8 − 10 days at 20 ∘ C 20^\circ\text{C} 2 0 ∘ C , expanding to > 15 − 20 days > 15 - 20 \text{ days} > 15 − 20 days at cold temperatures ( < 10 ∘ C < 10^\circ\text{C} < 1 0 ∘ C ).
Optimal pH : Target 7.5 − 8.5 7.5 - 8.5 7.5 − 8.5 . Nitrification rates drop by 50 % 50\% 50% at pH 7.0 \text{pH } 7.0 pH 7.0 and cease below pH 6.0 \text{pH } 6.0 pH 6.0 .
Biological Nitrogen Removal (BNR): Denitrification
Denitrification is the biological reduction of nitrate ( NO 3 − − N \text{NO}_3^--\text{N} NO 3 − − N ) to inert nitrogen gas ( N 2 \text{N}_2 N 2 ) by facultative heterotrophic bacteria ( Pseudomonas , Paracoccus , Alcaligenes ) under anoxic conditions (absence of dissolved oxygen, DO < 0.2 mg/L < 0.2 \text{ mg/L} < 0.2 mg/L , but presence of nitrate oxygen). Denitrification Reaction: 6 NO 3 − + 5 CH 3 OH (Methanol) → 3 N 2 ↑ + 5 CO 2 + 7 H 2 O + 6 OH − \text{Denitrification Reaction: } 6\text{NO}_3^- + 5\text{CH}_3\text{OH} \text{ (Methanol)} \rightarrow 3\text{N}_2 \uparrow + 5\text{CO}_2 + 7\text{H}_2\text{O} + 6\text{OH}^- Denitrification Reaction: 6 NO 3 − + 5 CH 3 OH (Methanol) → 3 N 2 ↑ + 5 CO 2 + 7 H 2 O + 6 OH −
Key Stoichiometric & Process Benefits
Alkalinity Recovery : Denitrification releases hydroxyl ions ( OH − \text{OH}^- OH − ), recovering 3.57 lbs of CaCO 3 alkalinity 3.57 \text{ lbs of CaCO}_3 \text{ alkalinity} 3.57 lbs of CaCO 3 alkalinity per lb of NO 3 − − N \text{NO}_3^--\text{N} NO 3 − − N reduced (recovering exactly 50 % 50\% 50% of alkalinity consumed during nitrification!).
Oxygen Credit : Heterotrophs utilize nitrate oxygen, saving equivalent to 2.86 lbs of O 2 2.86 \text{ lbs of O}_2 2.86 lbs of O 2 per lb of NO 3 − − N \text{NO}_3^--\text{N} NO 3 − − N reduced, lowering aeration blower energy requirements.
Process Configuration (MLE Process) : In the Modified Ludzack-Ettinger (MLE) configuration, primary effluent enters an un-aerated Anoxic Basin equipped with submerged mixers. An Internal Nitrate Recirculation (IMLR / NIT) pump recycles nitrified mixed liquor from the end of the Aerobic Basin back to the Anoxic Basin at rates of 200 % 200\% 200% to 400 % 400\% 400% of influent flow Q Q Q .
Enhanced Biological Phosphorus Removal (EBPR)
EBPR relies on specialized bacteria known as Polyphosphate Accumulating Organisms (PAOs) , such as Candidatus Accumulibacter phosphatis , to concentrate orthophosphate ( PO 4 3 − \text{PO}_4^{3-} PO 4 3 − ) inside cell biomass, which is subsequently wasted.
Operational Zones & Mechanisms
Anaerobic Zone (DO < 0.1 mg/L < 0.1 \text{ mg/L} < 0.1 mg/L , NO 3 − < 0.2 mg/L \text{NO}_3^- < 0.2 \text{ mg/L} NO 3 − < 0.2 mg/L ) :
PAOs break intracellular polyphosphate bonds to generate energy, releasing orthophosphate into the bulk liquid (P concentration in liquid increases).
PAOs use this energy to absorb Volatile Fatty Acids (VFAs) (acetate, propionate) from wastewater, storing them internally as Polyhydroxyalkanoates (PHAs).
Aerobic Zone :
PAOs oxidize stored internal PHAs using dissolved oxygen.
Generated energy powers cell growth and "luxury uptake" of orthophosphate from solution, storing excess P as intracellular polyphosphate granules. Cell phosphorus content rises from normal 1 − 2 % 1-2\% 1 − 2% up to 5 − 7 % 5-7\% 5 − 7% of dry cell weight.
Phosphorus is permanently removed from the system by wasting excess sludge (WAS) from the secondary clarifier.
Chemical Phosphorus Removal Backup
When biological P removal is insufficient, metal coagulants are added (alum, Al 2 ( SO 4 ) 3 \text{Al}_2(\text{SO}_4)_3 Al 2 ( SO 4 ) 3 , or ferric chloride, FeCl 3 \text{FeCl}_3 FeCl 3 ) to precipitate soluble orthophosphate as insoluble metal phosphate solids: Al 3 + + PO 4 3 − → AlPO 4 ↓ \text{Al}^{3+} + \text{PO}_4^{3-} \rightarrow \text{AlPO}_4 \downarrow Al 3 + + PO 4 3 − → AlPO 4 ↓ Fe 3 + + PO 4 3 − → FePO 4 ↓ \text{Fe}^{3+} + \text{PO}_4^{3-} \rightarrow \text{FePO}_4 \downarrow Fe 3 + + PO 4 3 − → FePO 4 ↓
- Tertiary Filtration & Effluent UV Disinfection
- Tertiary Filtration Systems
Tertiary filters polish secondary effluent to meet ultra-low limits ( TSS < 5 mg/L \text{TSS} < 5 \text{ mg/L} TSS < 5 mg/L , TP < 0.5 mg/L \text{TP} < 0.5 \text{ mg/L} TP < 0.5 mg/L ).
Cloth Media Disc Filters : Submerged pile-cloth discs with a nominal pore size of 5 − 10 μ m 5 - 10 \mu\text{m} 5 − 10 μ m . Water flows outside-in through cloth media. Backwashing occurs via surface vacuum heads while discs rotate without interrupting forward treatment flow. Low operational headloss ( < 12 inches < 12 \text{ inches} < 12 inches ).
Deep Bed Sand Filters : Mono-medium or dual-media (anthracite/sand) gravity filters. Backwashing is triggered by high headloss ( > 6 − 8 ft > 6 - 8 \text{ ft} > 6 − 8 ft ), high effluent turbidity ( > 2.0 NTU > 2.0 \text{ NTU} > 2.0 NTU ), or timer (24 hrs). Combined air scour and water backwash fluidize the bed to purge entrapped solids.
Effluent Ultraviolet (UV) Disinfection
UV disinfection is a physical process utilizing germicidal UV-C light at a peak wavelength of 254 nm 254 \text{ nm} 254 nm .
Germicidal Mechanism : UV light penetrates cell walls of pathogenic bacteria, viruses, and protozoa ( Giardia , Cryptosporidium ), dimerizing thymine bases in DNA/RNA. This prevents cellular replication and renders pathogens non-infectious without generating toxic disinfection byproducts (DBPs like trihalomethanes).
UV Dose Equation : UV Dose ( mJ/cm 2 ) = UV Intensity ( mW/cm 2 ) × Exposure Time ( t seconds ) \text{UV Dose } (\text{mJ/cm}^2) = \text{UV Intensity } (\text{mW/cm}^2) \times \text{Exposure Time } (t \text{ seconds}) UV Dose ( mJ/cm 2 ) = UV Intensity ( mW/cm 2 ) × Exposure Time ( t seconds )
Critical Operating Factors :
UV Transmittance (UVT) : Percentage of 254 nm 254 \text{ nm} 254 nm light passing through 1 cm 1 \text{ cm} 1 cm of water. Target UVT > 65 % > 65\% > 65% . Low UVT (caused by iron, color, or TSS) attenuates UV light rapidly.
Quartz Sleeve Maintenance : Mineral scale (calcium, iron) coats quartz protective sleeves, reducing UV intensity. Sleeves require automated mechanical wipers and routine chemical cleaning with citric acid.
Solids Shielding : Pathogens enclosed within large TSS flocs are shielded from UV rays, making effective upstream tertiary filtration vital.
Worked Calculation Example (BNR Alkalinity Balance)
Problem Statement: A wastewater facility processes Q = 2.0 MGD Q = 2.0 \text{ MGD} Q = 2.0 MGD with an influent NH 4 + − N = 30 mg/L \text{NH}_4^+-\text{N} = 30 \text{ mg/L} NH 4 + − N = 30 mg/L and effluent target NH 4 + − N = 1.0 mg/L \text{NH}_4^+-\text{N} = 1.0 \text{ mg/L} NH 4 + − N = 1.0 mg/L . Influent alkalinity is 220 mg/L as CaCO 3 220 \text{ mg/L as CaCO}_3 220 mg/L as CaCO 3 . The MLE denitrification system achieves 75 % 75\% 75% reduction of generated nitrate. Calculate the net effluent alkalinity.
Step 1: Calculate ammonia-nitrogen oxidized. Δ NH 4 + − N = 30 mg/L − 1.0 mg/L = 29 mg/L oxidized \Delta \text{NH}_4^+-\text{N} = 30 \text{ mg/L} - 1.0 \text{ mg/L} = 29 \text{ mg/L oxidized} Δ NH 4 + − N = 30 mg/L − 1.0 mg/L = 29 mg/L oxidized
Step 2: Calculate alkalinity consumed by Nitrification. Alkalinity Consumed = 29 mg/L × 7.14 mg CaCO 3 / mg NH 4 + − N = 207.06 mg/L as CaCO 3 \text{Alkalinity Consumed} = 29 \text{ mg/L} \times 7.14 \text{ mg CaCO}_3/\text{mg NH}_4^+-\text{N} = 207.06 \text{ mg/L as CaCO}_3 Alkalinity Consumed = 29 mg/L × 7.14 mg CaCO 3 / mg NH 4 + − N = 207.06 mg/L as CaCO 3
Step 3: Calculate alkalinity recovered by Denitrification ( 75 % 75\% 75% of 29 mg/L = 21.75 mg/L NO 3 − − N 29 \text{ mg/L} = 21.75 \text{ mg/L } \text{NO}_3^--\text{N} 29 mg/L = 21.75 mg/L NO 3 − − N reduced). Alkalinity Recovered = 21.75 mg/L × 3.57 mg CaCO 3 / mg NO 3 − − N = 77.65 mg/L as CaCO 3 \text{Alkalinity Recovered} = 21.75 \text{ mg/L} \times 3.57 \text{ mg CaCO}_3/\text{mg NO}_3^--\text{N} = 77.65 \text{ mg/L as CaCO}_3 Alkalinity Recovered = 21.75 mg/L × 3.57 mg CaCO 3 / mg NO 3 − − N = 77.65 mg/L as CaCO 3
Step 4: Calculate net effluent alkalinity. Net Effluent Alkalinity = 220 − 207.06 + 77.65 = 90.59 mg/L as CaCO 3 ( Sufficient residual buffering capacity ) \text{Net Effluent Alkalinity} = 220 - 207.06 + 77.65 = 90.59 \text{ mg/L as CaCO}_3 \quad (\text{Sufficient residual buffering capacity}) Net Effluent Alkalinity = 220 − 207.06 + 77.65 = 90.59 mg/L as CaCO 3 ( Sufficient residual buffering capacity )