Study guide

8.6 Fixed-Film & Lagoon Treatment Systems

South Carolina Water/Wastewater Operator Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: South Carolina Regulations & Licensing Framework

1.1 SC Environmental Certification Board & Chapter 51 Regulations 1.2 Certification Levels & Experience Requirements 1.3 Facility Classifications & Operator-in-Charge Duties 1.4 Exam Logistics, Scoring & Study Resources

2 Chapter 2: Source Water Characteristics

2.1 Raw Water Sources & Pretreatment 2.2 Groundwater Sources, Wells & GWUDI Determinations 2.3 Watershed Protection & Source Water Contaminants

3 Chapter 3: Water Treatment: Coagulation, Flocculation & Sedimentation

3.1 Coagulation & Flocculation Process Control 3.2 Sedimentation Basins & Clarification

4 Chapter 4: Water Treatment: Filtration

4.1 Granular Media & Membrane Filtration 4.2 Filter Operation, Backwash & Troubleshooting

5 Chapter 5: Water Treatment: Disinfection & Chemical Conditioning

5.1 Chlorination & Chemical Disinfection 5.2 CT Calculations & Disinfection Byproducts Compliance 5.3 Chloramines, Chlorine Dioxide, Ozone & UV 5.4 Corrosion Control & the Lead and Copper Rule 5.5 Fluoridation & Water Softening 5.6 Iron, Manganese, Taste & Odor Control

6 Chapter 6: Water Distribution Systems

6.1 Water Distribution Network Operations & Maintenance 6.2 Cross-Connection Control & Backflow Prevention 6.3 Distribution Hydraulics & Pressure Management 6.4 Pipes, Valves, Hydrants & Appurtenances 6.5 Storage Tanks & Reservoirs 6.6 Water Quality in Distribution: Flushing & Residual Management 6.7 Main Disinfection, Breaks & Repair

7 Chapter 7: Wastewater Collection & Preliminary Treatment

7.1 Wastewater Collection & Preliminary Operations 7.2 Sanitary Sewer Collection System Maintenance 7.3 Lift Station Pumps, Controls & Hydraulics

8 Chapter 8: Wastewater Treatment: Primary & Secondary

8.1 Wastewater Characteristics & Plant Loadings 8.2 Primary Sedimentation & Clarifier Operations 8.3 Activated Sludge Process Control & Operations 8.4 Activated Sludge Troubleshooting 8.5 Aeration Systems & Dissolved Oxygen Control 8.6 Fixed-Film & Lagoon Treatment Systems 8.7 Biological Nutrient Removal & Tertiary Treatment

9 Chapter 9: Wastewater Disinfection, Effluent & Industrial Treatment

9.1 Wastewater Disinfection & Dechlorination 9.2 Effluent Disposal, Reuse & Land Application 9.3 Physical/Chemical Industrial Wastewater Treatment 9.4 Industrial Pretreatment Programs

10 Chapter 10: Solids, Biosolids & Regulatory Permitting

10.1 Sludge Thickening, Digestion & Dewatering 10.2 Biosolids Stabilization & Part 503 Land Application 10.3 Clean Water Act & NPDES Permit Compliance 10.4 Safe Drinking Water Act Compliance & Public Notification

11 Chapter 11: Laboratory Analysis & Quality Control

11.1 Sampling, Preservation & Chain of Custody 11.2 Physical & Chemical Water Quality Analysis 11.3 Wastewater Process Testing & Analytical Methods 11.4 Microbiological Testing & Quality Assurance 11.5 Data Validation, Reporting & Laboratory Certification

12 Chapter 12: Equipment Operation & Maintenance

12.1 Pumps: Types, Curves & Cavitation 12.2 Motors, Drives & Electrical Fundamentals 12.3 Bearings, Seals, Couplings & Lubrication 12.4 Flow Measurement & Process Instrumentation 12.5 Chemical Feed Equipment & Calibration 12.6 SCADA, Controls & Preventive Maintenance Programs

13 Chapter 13: Safety, Security & Administrative Procedures

13.1 Confined Space Entry & Atmospheric Hazards 13.2 Chlorine Gas Safety & Emergency Response 13.3 Lockout/Tagout, PPE, Hazard Communication & Excavation 13.4 Security, Vulnerability Assessment & Emergency Response Planning 13.5 Recordkeeping, Reporting & Administrative Duties

14 Chapter 14: Process Calculations & Hydraulic Math

14.1 Basic Water & Wastewater Math Fundamentals 14.2 Chemical Feed Rate & Dosage Calculations 14.3 Detention Time & Volumetric Flow Calculations 14.4 Removal Efficiency & Process Loading Rates 14.5 Pump Hydraulics & Horsepower Calculations 14.6 Activated Sludge Process Control Math

8.6 Fixed-Film & Lagoon Treatment Systems

Key Takeaways Explain This Topic AI

Trickling filters and RBCs rely on attached growth biofilms (fixed-film) where microorganisms absorb oxygen from surrounding air while attached to static or rotating media.

Trickling filter performance depends on hydraulic loading rate, organic loading rate, and recirculation ratio (R = QR / Q), which dilutes high-strength influent and prevents media drying.

RBC first-stage organic loading must be limited to ≤ 4–6 lbs BOD5/1,000 ft²/day to prevent structural shaft overload and growth of white sulfur bacteria (Beggiatoa).

Facultative lagoons operate with three distinct depth zones (aerobic surface, facultative middle, anaerobic bottom) and require long hydraulic retention times (20–180 days).

Algal photosynthesis causes dramatic diurnal variations in facultative lagoons, elevating pH up to 9.5 and DO above supersaturation during daylight, followed by drops at night due to respiration.

Last updated: August 2026

Fixed-Film Treatment Principles: Trickling Filters

Fixed-film (attached-growth) systems differ fundamentally from suspended-growth activated sludge. In fixed-film processes, microorganisms attach themselves to inert packing media, forming a biological slime layer ( biofilm ). As settled wastewater passes over the biofilm, microorganisms absorb dissolved organic matter and oxygen from surrounding air pockets.

1. Media Types & Physical Characteristics

Crushed Rock / Blast Furnace Slag : Traditional media ( 2 − 4 inch 2 - 4 \text{ inch} 2 − 4 inch rock). Bed depths range from 3 − 8 ft 3 - 8 \text{ ft} 3 − 8 ft . Rock media provides low specific surface area ( 15 − 20 ft 2 / ft 3 15 - 20 \text{ ft}^2/\text{ft}^3 15 − 20 ft 2 / ft 3 ) and low void space ( 45 − 55 % 45 - 55\% 45 − 55% ), making it heavy, structurally restricted, and prone to ponding.

Synthetic Plastic Media : Modern cross-flow corrugated PVC modules or random plastic rings. Bed depths extend from 15 − 30 ft 15 - 30 \text{ ft} 15 − 30 ft . Synthetic media provides high specific surface area ( 30 − 45 ft 2 / ft 3 30 - 45 \text{ ft}^2/\text{ft}^3 30 − 45 ft 2 / ft 3 ) and high void volume ( > 90 % > 90\% > 90% ), enabling superior oxygen transfer and significantly higher loading capacities without plugging.

2. Hydraulic & Organic Loading Rates

Trickling filter performance is governed by two key loading calculations: Hydraulic Loading Rate (HLR) = Q + Q R (gpd) Filter Surface Area A (ft 2 ) \text{Hydraulic Loading Rate (HLR)} = \frac{Q + Q_R \text{ (gpd)}}{\text{Filter Surface Area } A \text{ (ft}^2\text{)}} Hydraulic Loading Rate (HLR) = Filter Surface Area A (ft 2 ) Q + Q R ​ (gpd) ​ Organic Loading Rate (OLR) = lbs BOD 5 applied/day Filter Media Volume V (1,000 ft 3 ) \text{Organic Loading Rate (OLR)} = \frac{\text{lbs } \text{BOD}_5 \text{ applied/day}}{\text{Filter Media Volume } V \text{ (1,000 ft}^3\text{)}} Organic Loading Rate (OLR) = Filter Media Volume V (1,000 ft 3 ) lbs BOD 5 ​ applied/day ​

3. Recirculation Ratio ( R R R )

Recirculation involves pumping secondary clarifier effluent back to the trickling filter distributor arm: R = Recirculated Flow Rate ( Q R ) Plant Influent Flow Rate ( Q ) R = \frac{\text{Recirculated Flow Rate } (Q_R)}{\text{Plant Influent Flow Rate } (Q)} R = Plant Influent Flow Rate ( Q ) Recirculated Flow Rate ( Q R ​ ) ​

Recirculation ratios typically range from 0.5 : 1 0.5 : 1 0.5 : 1 to 3.0 : 1 3.0 : 1 3.0 : 1 . Operating benefits include:

Diluting high-strength or toxic influent organic spikes.

Keeping biological media continuously moist during low night flows to prevent biofilm death.

Providing high hydraulic shear to continuously flush excess sloughed solids.

Deterring Psychoda filter fly breeding by maintaining wet media surface conditions.

4. Sloughing & Operational Troubleshooting

As the biofilm thickens ( 1 − 3 mm 1 - 3 \text{ mm} 1 − 3 mm ), oxygen cannot penetrate to the inner microbial layers attached to the media. Anaerobic decomposition occurs at the media interface, weakening attachment until hydraulic flow shears the slime layer off—a process known as sloughing . Sloughed solids pass to the secondary clarifier for removal.

Ponding Clearance : Standing water on top of media is caused by excessive biomass growth or debris plugging voids. Clear ponding by applying high-rate recirculation, shock-dosing chlorine ( 5 − 10 mg/L 5 - 10 \text{ mg/L} 5 − 10 mg/L for short duration or 1 − 2 mg/L 1 - 2 \text{ mg/L} 1 − 2 mg/L continuous), hand-rodding/raking the media surface, or flooding the filter.

Psychoda Filter Fly Control : Tiny nuisance midges breed in damp, unflooded filter media. Control flies by flooding the filter bed completely with water for 24 hours every 7 to 14 days to drown larvae, or increasing hydraulic loading to wash larvae away.

Rotating Biological Contactors (RBCs)

An RBC consists of closely spaced, high-density polyethylene (HDPE) corrugated plastic discs (typically 12 ft 12 \text{ ft} 12 ft in diameter) mounted on a central horizontal steel shaft (up to 25 ft 25 \text{ ft} 25 ft long). Discs are submerged approximately 40 % 40\% 40% in a semicircular concrete trough containing wastewater.

Mechanical Operation & Aeration

The shaft rotates slowly at 1.0 1.0 1.0 to 1.5 rpm 1.5 \text{ rpm} 1.5 rpm . As the discs rotate, attached biofilm is alternately exposed to wastewater in the trough (absorbing organic nutrients) and atmospheric air (absorbing oxygen). Disc rotation also creates gentle hydraulic shear that maintains uniform biofilm thickness ( 0.05 − 0.10 inches 0.05 - 0.10 \text{ inches} 0.05 − 0.10 inches ).

First-Stage Loading Limitations

First-stage RBC units process raw primary effluent containing the highest organic strength. To prevent severe operational failures, first-stage organic loading must be strictly controlled: Maximum First-Stage OLR ≤ 4.0 − 6.0 lbs BOD 5 / 1 , 000 ft 2 disc area/day \text{Maximum First-Stage OLR} \le 4.0 - 6.0 \text{ lbs BOD}_5/1,000 \text{ ft}^2 \text{ disc area/day} Maximum First-Stage OLR ≤ 4.0 − 6.0 lbs BOD 5 ​ /1 , 000 ft 2 disc area/day

Consequences of Organic Overloading:

Severe dissolved oxygen depletion in RBC troughs.

Proliferation of Beggiatoa (filamentous white sulfur bacteria utilizing H 2 S \text{H}_2\text{S} H 2 ​ S ), creating a thick white slime layer.

Excessive biofilm mass accumulation, imposing massive rotational weight that causes shaft fatigue failure, mechanical drive failure, and structural collapse.

Waste Stabilization Ponds & Lagoons

Waste stabilization ponds provide low-cost biological treatment using long hydraulic retention times (HRTs) and natural ecological interactions.

Lagoon Type Depth Range (ft) Operational Characteristics & Oxygen Source

Aerobic Ponds 2 − 5 2 - 5 2 − 5 Fully oxygenated throughout depth; algae photosynthesis & wind action; HRT 10 − 40 10-40 10 − 40 days

Facultative Lagoons 3 − 8 3 - 8 3 − 8 Stratified into 3 distinct depth zones (aerobic, facultative, anaerobic); HRT 20 − 180 20-180 20 − 180 days

Anaerobic Lagoons 8 − 15 8 - 15 8 − 15 Zero DO throughout depth; no algae; primary treatment for industrial/livestock waste; HRT 20 − 50 20-50 20 − 50 days

Facultative Lagoon Depth Stratification

Aerobic Surface Zone (Upper 1–2 ft) : Contains abundant dissolved oxygen supplied by solar photosynthetic activity of green algae ( Chlorella , Scenedesmus ) and atmospheric wind mixing.

Facultative Middle Zone (Middle 2–4 ft) : Contains variable DO. Facultative bacteria switch between aerobic respiration and anaerobic fermentation depending on light and mixing.

Anaerobic Bottom Zone (Bottom 1–3 ft) : Zero DO. Settled organic sludge undergoes anaerobic digestion by methanogenic bacteria, producing methane ( CH 4 \text{CH}_4 CH 4 ​ ), carbon dioxide ( CO 2 \text{CO}_2 CO 2 ​ ), and hydrogen sulfide ( H 2 S \text{H}_2\text{S} H 2 ​ S ).

Algae-Bacterial Symbiosis & Diurnal Variations

Facultative lagoons operate via a complementary symbiotic relationship:

Heterotrophic Bacteria consume organic waste ( BOD 5 \text{BOD}_5 BOD 5 ​ ) using O 2 \text{O}_2 O 2 ​ , releasing CO 2 \text{CO}_2 CO 2 ​ , ammonia ( NH 4 + \text{NH}_4^+ NH 4 + ​ ), and phosphates ( PO 4 3 − \text{PO}_4^{3-} PO 4 3 − ​ ).

Algae utilize solar energy, CO 2 \text{CO}_2 CO 2 ​ , and inorganic nutrients to produce new algal cells and release dissolved oxygen ( O 2 \text{O}_2 O 2 ​ ) back to bacteria. Photosynthesis: 6 CO 2 + 6 H 2 O + Sunlight → Algae C 6 H 12 O 6 + 6 O 2 \text{Photosynthesis: } 6\text{CO}_2 + 6\text{H}_2\text{O} + \text{Sunlight} \xrightarrow{\text{Algae}} \text{C}_6\text{H}_{12}\text{O}_6 + 6\text{O}_2 Photosynthesis: 6 CO 2 ​ + 6 H 2 ​ O + Sunlight Algae ​ C 6 ​ H 12 ​ O 6 ​ + 6 O 2 ​ Respiration: C 6 H 12 O 6 + 6 O 2 → Bacteria/Algae 6 CO 2 + 6 H 2 O + Energy \text{Respiration: } \text{C}_6\text{H}_{12}\text{O}_6 + 6\text{O}_2 \xrightarrow{\text{Bacteria/Algae}} 6\text{CO}_2 + 6\text{H}_2\text{O} + \text{Energy} Respiration: C 6 ​ H 12 ​ O 6 ​ + 6 O 2 ​ Bacteria/Algae ​ 6 CO 2 ​ + 6 H 2 ​ O + Energy

Because photosynthesis requires sunlight while respiration occurs continuously day and night, facultative lagoons undergo dramatic diurnal fluctuations :

Peak Daylight (Late Afternoon) : Photosynthesis consumes free carbon dioxide ( CO 2 \text{CO}_2 CO 2 ​ ) and carbonic acid faster than it is produced. Removing carbonic acid shifts carbonate equilibrium and causes pH to rise up to 8.5 − 9.5 8.5 - 9.5 8.5 − 9.5 . Dissolved oxygen reaches maximum levels, frequently achieving supersaturation ( > 15 − 20 mg/L > 15 - 20 \text{ mg/L} > 15 − 20 mg/L ) .

Nighttime (Pre-Dawn) : Photosynthesis ceases completely while algal and bacterial respiration continues. Carbon dioxide accumulates, forming carbonic acid ( H 2 CO 3 \text{H}_2\text{CO}_3 H 2 ​ CO 3 ​ ) and causing pH to drop to 7.0 − 7.4 7.0 - 7.4 7.0 − 7.4 . Dissolved oxygen drops steadily, reaching its daily minimum ( < 1.0 − 2.0 mg/L < 1.0 - 2.0 \text{ mg/L} < 1.0 − 2.0 mg/L ) just before sunrise.

South Carolina DES Regulation 61-67 Lagoon Standards

South Carolina regulations impose strict engineering standards on municipal lagoons to protect groundwater and surface water quality:

Minimum Liner Permeability : All lagoon basins must be sealed with a synthetic liner or compacted clay liner achieving a maximum hydraulic conductivity k ≤ 1.0 × 10 − 7 cm/s k \le 1.0 \times 10^{-7} \text{ cm/s} k ≤ 1.0 × 1 0 − 7 cm/s .

Minimum Retention Time : Un-aerated facultative lagoons must provide a minimum 45 to 90 days of hydraulic retention time.

Effluent Limits : Secondary effluent standards apply ( BOD 5 ≤ 30 mg/L \text{BOD}_5 \le 30 \text{ mg/L} BOD 5 ​ ≤ 30 mg/L , TSS ≤ 30 mg/L \text{TSS} \le 30 \text{ mg/L} TSS ≤ 30 mg/L 30-day average), though special permit allowances up to 90 mg/L 90 \text{ mg/L} 90 mg/L TSS may be granted for algae particles if non-toxic.

Loading diagram... Depth Stratification & Biochemical Zones in a Facultative Lagoon

Facultative Lagoon Diurnal Cycle (DO mg/L & pH)