Study guide

8.1 Wastewater Characteristics & Plant Loadings

South Carolina Water/Wastewater Operator Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: South Carolina Regulations & Licensing Framework

1.1 SC Environmental Certification Board & Chapter 51 Regulations 1.2 Certification Levels & Experience Requirements 1.3 Facility Classifications & Operator-in-Charge Duties 1.4 Exam Logistics, Scoring & Study Resources

2 Chapter 2: Source Water Characteristics

2.1 Raw Water Sources & Pretreatment 2.2 Groundwater Sources, Wells & GWUDI Determinations 2.3 Watershed Protection & Source Water Contaminants

3 Chapter 3: Water Treatment: Coagulation, Flocculation & Sedimentation

3.1 Coagulation & Flocculation Process Control 3.2 Sedimentation Basins & Clarification

4 Chapter 4: Water Treatment: Filtration

4.1 Granular Media & Membrane Filtration 4.2 Filter Operation, Backwash & Troubleshooting

5 Chapter 5: Water Treatment: Disinfection & Chemical Conditioning

5.1 Chlorination & Chemical Disinfection 5.2 CT Calculations & Disinfection Byproducts Compliance 5.3 Chloramines, Chlorine Dioxide, Ozone & UV 5.4 Corrosion Control & the Lead and Copper Rule 5.5 Fluoridation & Water Softening 5.6 Iron, Manganese, Taste & Odor Control

6 Chapter 6: Water Distribution Systems

6.1 Water Distribution Network Operations & Maintenance 6.2 Cross-Connection Control & Backflow Prevention 6.3 Distribution Hydraulics & Pressure Management 6.4 Pipes, Valves, Hydrants & Appurtenances 6.5 Storage Tanks & Reservoirs 6.6 Water Quality in Distribution: Flushing & Residual Management 6.7 Main Disinfection, Breaks & Repair

7 Chapter 7: Wastewater Collection & Preliminary Treatment

7.1 Wastewater Collection & Preliminary Operations 7.2 Sanitary Sewer Collection System Maintenance 7.3 Lift Station Pumps, Controls & Hydraulics

8 Chapter 8: Wastewater Treatment: Primary & Secondary

8.1 Wastewater Characteristics & Plant Loadings 8.2 Primary Sedimentation & Clarifier Operations 8.3 Activated Sludge Process Control & Operations 8.4 Activated Sludge Troubleshooting 8.5 Aeration Systems & Dissolved Oxygen Control 8.6 Fixed-Film & Lagoon Treatment Systems 8.7 Biological Nutrient Removal & Tertiary Treatment

9 Chapter 9: Wastewater Disinfection, Effluent & Industrial Treatment

9.1 Wastewater Disinfection & Dechlorination 9.2 Effluent Disposal, Reuse & Land Application 9.3 Physical/Chemical Industrial Wastewater Treatment 9.4 Industrial Pretreatment Programs

10 Chapter 10: Solids, Biosolids & Regulatory Permitting

10.1 Sludge Thickening, Digestion & Dewatering 10.2 Biosolids Stabilization & Part 503 Land Application 10.3 Clean Water Act & NPDES Permit Compliance 10.4 Safe Drinking Water Act Compliance & Public Notification

11 Chapter 11: Laboratory Analysis & Quality Control

11.1 Sampling, Preservation & Chain of Custody 11.2 Physical & Chemical Water Quality Analysis 11.3 Wastewater Process Testing & Analytical Methods 11.4 Microbiological Testing & Quality Assurance 11.5 Data Validation, Reporting & Laboratory Certification

12 Chapter 12: Equipment Operation & Maintenance

12.1 Pumps: Types, Curves & Cavitation 12.2 Motors, Drives & Electrical Fundamentals 12.3 Bearings, Seals, Couplings & Lubrication 12.4 Flow Measurement & Process Instrumentation 12.5 Chemical Feed Equipment & Calibration 12.6 SCADA, Controls & Preventive Maintenance Programs

13 Chapter 13: Safety, Security & Administrative Procedures

13.1 Confined Space Entry & Atmospheric Hazards 13.2 Chlorine Gas Safety & Emergency Response 13.3 Lockout/Tagout, PPE, Hazard Communication & Excavation 13.4 Security, Vulnerability Assessment & Emergency Response Planning 13.5 Recordkeeping, Reporting & Administrative Duties

14 Chapter 14: Process Calculations & Hydraulic Math

14.1 Basic Water & Wastewater Math Fundamentals 14.2 Chemical Feed Rate & Dosage Calculations 14.3 Detention Time & Volumetric Flow Calculations 14.4 Removal Efficiency & Process Loading Rates 14.5 Pump Hydraulics & Horsepower Calculations 14.6 Activated Sludge Process Control Math

8.1 Wastewater Characteristics & Plant Loadings

Key Takeaways Explain This Topic AI

Typical medium-strength domestic wastewater runs about 200 mg/L BOD, 200 mg/L TSS, 40 mg/L total nitrogen, and 7 mg/L total phosphorus.

The standard domestic design basis is roughly 100 gallons per capita per day and about 0.17 to 0.20 pounds of BOD per person per day.

Pounds of loading equal flow in MGD times concentration in mg/L times 8.34.

BOD measures the biodegradable oxygen demand over five days while COD measures total chemically oxidizable material in about two hours.

Diurnal flow peaks in late morning and early evening, and infiltration and inflow show up as sustained wet-weather flow increases with diluted strength.

Last updated: August 2026

8.1 Wastewater Characteristics & Plant Loadings

The standardized wastewater exam weights Treatment Process Evaluation and Adjustment at 38 to 42 questions out of 100 — the largest area on every class of the exam, and every one of those adjustments starts from the same question: what is coming in? Concentration alone never answers it. Pounds do.

1. Typical Domestic Wastewater Strength

  • Parameter Weak Medium (typical) Strong
  • BOD₅ 110 mg/L 200 mg/L 400 mg/L
  • COD 250 mg/L 500 mg/L 1,000 mg/L
  • TSS 100 mg/L 200 mg/L 350 mg/L
  • Total nitrogen (TN) 20 mg/L 40 mg/L 85 mg/L
  • Ammonia-N 12 mg/L 25 mg/L 50 mg/L
  • Total phosphorus (TP) 4 mg/L 7 mg/L 15 mg/L
  • Alkalinity 50 mg/L 100 mg/L 200 mg/L
  • Per-capita design basis

Flow: roughly 100 gallons per capita per day (gpcd) including a normal allowance for infiltration; some references use 80–120 gpcd.

BOD: roughly 0.17 to 0.20 lb BOD per person per day .

TSS: roughly 0.20 lb per person per day .

These let you sanity-check a plant. A 10,000-person community should deliver about 1.0 MGD carrying roughly 1,700–2,000 lb/day of BOD. If your plant sees 4,000 lb/day, you have an industrial contributor, hauled septage, or a metering error.

2. The Pounds Formula — the most important equation in wastewater lbs/day = Flow (MGD) × Concentration (mg/L) × 8.34 \text{lbs/day} = \text{Flow (MGD)} \times \text{Concentration (mg/L)} \times 8.34 lbs/day = Flow (MGD) × Concentration (mg/L) × 8.34

The 8.34 is pounds per gallon of water. Concentration tells you quality ; pounds tell you load , and biological processes respond to load.

Worked example. A plant receives 2.4 MGD at 215 mg/L BOD. 2.4 × 215 × 8.34 = 4,303 lb/day BOD 2.4 \times 215 \times 8.34 = \textbf{4,303 lb/day BOD} 2.4 × 215 × 8.34 = 4,303 lb/day BOD

Why it matters. Suppose influent BOD drops to 140 mg/L but flow rises to 3.8 MGD during a storm: 3.8 × 140 × 8.34 = 4,437 lb/day 3.8 \times 140 \times 8.34 = \textbf{4,437 lb/day} 3.8 × 140 × 8.34 = 4,437 lb/day

Concentration fell by 35%, but the load actually went up . An operator who wastes sludge based on the falling concentration will under-feed the biology and lose the process. Always convert to pounds first.

3. The Oxygen Demand Tests

Test What it measures Time Notes

BOD₅ Oxygen consumed by microorganisms degrading organic matter 5 days at 20 °C The regulatory standard; slow, so useless for same-day control

CBOD₅ BOD with nitrification suppressed by an inhibitor 5 days Isolates carbonaceous demand; most modern NPDES permits use CBOD

COD Total chemically oxidizable material, via strong acid dichromate digestion ~2 hours Fast; always higher than BOD because it oxidizes non-biodegradable material too

  • TOC Total organic carbon Minutes Fastest; used as a surrogate once correlated
  • Using the COD:BOD ratio

Once a plant establishes its own COD-to-BOD ratio on domestic influent (commonly around 2:1 to 2.5:1 ), COD becomes a same-day surrogate for process control. A sudden jump in the ratio signals arrival of material that is chemically oxidizable but not biodegradable — an industrial discharge that the biology cannot treat and that may be toxic to it.

4. Solids Terminology

  • Term Definition
  • Total Solids (TS) Everything remaining after evaporation at 103–105 °C
  • Total Suspended Solids (TSS) Retained on a glass fiber filter
  • Total Dissolved Solids (TDS) Passes the filter

Volatile Suspended Solids (VSS) The portion of TSS lost on ignition at 550 °C — the organic fraction, typically 70–80% of TSS in domestic wastewater

  • Fixed Suspended Solids (FSS) The mineral residue remaining after ignition — the inert fraction
  • Settleable Solids Measured in an Imhoff cone after 1 hour, reported in mL/L

VSS is used as a proxy for biological mass in the activated sludge process, which is why MLVSS rather than MLSS is often the control parameter.

5. Diurnal Variation

Domestic flow follows a daily rhythm:

Minimum flow in the early morning hours, roughly 3–6 a.m.

Morning peak in the late morning as the community wakes and showers.

Evening peak in the early evening.

Peak hourly flow commonly runs 1.5 to 2.5 times average daily flow in a typical municipal system, higher in small systems.

Strength peaks track flow peaks, so the peak pound loading arrives with the peak flow — the process is stressed on both axes at once. Equalization basins exist to flatten this.

6. Infiltration and Inflow

Infiltration Inflow

Path Groundwater entering through cracks, defective joints, and deteriorated pipe Stormwater entering directly through roof drains, cross-connections, manhole covers, sump pumps

Timing Slow, sustained ; rises with the water table and persists for days or weeks Fast, sharp ; peaks within hours of rainfall and recedes quickly

Signature at the plant Chronically elevated flow with diluted influent strength Sudden hydraulic spike, washout risk, diluted strength

How I&I shows up in your numbers: flow up, concentrations down, but pounds roughly unchanged . That is the diagnostic. If both flow and pounds rise together, you have a new load, not water in the collection system.

Consequences: hydraulic overloading, solids washout from clarifiers, reduced detention time, lost treatment capacity paid for by ratepayers, and in severe cases sanitary sewer overflows. See Section 7.2 for collection system source control.

7. Other Influent Characteristics Worth Watching

Temperature — biological rates fall sharply in winter; nitrification is the first process to suffer.

pH and alkalinity — nitrification consumes roughly 7.14 mg/L of alkalinity as CaCO₃ per mg/L of ammonia oxidized , so low-alkalinity influent can crash pH and stall the process.

Septage and hauled waste — extremely strong, often 20–50 times domestic strength; must be metered in slowly.

FOG (fats, oils, grease) — causes collection blockages and, at the plant, filamentous foaming.

Toxic and inhibitory loads — heavy metals, solvents, and strong acids or bases from industry. Prevention is the industrial pretreatment program in Section 9.4.