Study guide

15.2 Water Standards for Cupping & Brewing

SCA Q Grader License CVA-Based Q Grader Course

Track your progress as you read

Finished sections get a check mark.

1 SCA Q Grader License & Course Structure

1.1 The SCA Q Grader License: Issuer, 2025 Transition & Course Design 1.2 The Nine Assessments: Eight Practicals and One Written Exam 1.3 Attempts, Retakes, Renewal & a Pre-Course Preparation Plan

2 Taste Physiology & Main Taste Solutions

2.1 Human Gustatory Biology & The Five Basic Tastes 2.2 Main Taste Solutions Practical: Sweet, Salty & Sour Intensities 2.3 Palate Care, Sensory Adaptation & Cognitive Biases

3 Olfaction & CVA Olfactory Category Examples

3.1 Olfaction Mechanics: Orthonasal vs. Retronasal Pathways 3.2 The CVA Olfactory Lexicon: CATA Categories & Flavor Wheel Links 3.3 Olfactory Category Examples Practical & Library Drills

4 Triangulation & Sensory Discrimination

4.1 Triangle Testing Principles & Statistical Foundations 4.2 Triangulation Practical: Setup, Execution & Practice Triads 4.3 Discrimination Strategies & Troubleshooting on the Cupping Table

5 Coffee Acids, Acidity & Sweetness

5.1 Chemistry & Sensoric Profiles of Coffee Acids 5.2 Rating Acidity & Sweetness on the CVA Forms 5.3 Acidity Dynamics vs. Roasting & Fermentation

6 SCA-102 Sample Preparation & Cupping Mechanics

6.1 SCA-102 Sample Preparation: Roast Level, Dose, Cups & Grind 6.2 SCA-102 Cupping Steps: Fragrance, Aroma, Break, Skim & Liquoring 6.3 Cupping Mechanics, Water & the Cupping Skills Practical

7 CVA Descriptive & Affective Assessments

7.1 Descriptive Assessment (SCA-103): Intensity Scales & CATA 7.2 Affective Assessment (SCA-104): Impression of Quality & the Cupping Score 7.3 Defects, Uniformity & Passing the Descriptive and Affective Practicals

8 CVA Physical Assessment & Green Coffee Defects

8.1 CVA Physical Assessment: Sample, Color, Moisture, Size & Workflow 8.2 Category 1 (Primary) Defects & Zero-Tolerance Impact 8.3 Category 2 (Secondary) Defects & Allowable Limits 8.4 Physical Sieve Screen Sizing & Green Bean Density

9 Sample Roasting & Roasting Problems

9.1 Cupping-Level Sample Roasting under SCA-102 9.2 Roasted Coffee Inspection & Quakers 9.3 Roasting Problems Practical: Too Light, Too Dark, Too Fast, Too Slow

10 Coffee Botany, Genetics & Cultivars

10.1 Taxonomy: Coffea arabica vs. Coffea canephora 10.2 Heritage Arabica Cultivars: Typica & Bourbon Lineages 10.3 Elite & Introgressed Varieties: Gesha, SLs & Hybrids 10.4 WCR Variety Catalog, F1 Hybrids & Disease Resistance

11 Coffee Processing & Fermentation Science

11.1 Washed / Wet Processing & Demucilage Dynamics 11.2 Natural / Dry Processing & Fruit Drying Dynamics 11.3 Honey / Pulped Natural Processing Variants 11.4 Anaerobic, Carbonic Maceration & Advanced Fermentations

12 Coffee Geography, Terroir & Global Origins

12.1 East African Terroirs: Ethiopia & Kenya 12.2 South American Origins: Colombia & Brazil 12.3 Central America & Caribbean: Guatemala, Costa Rica, Panama 12.4 Asia-Pacific & Wet-Hulled Dynamics: Indonesia

13 CVA Framework, Extrinsic Assessment & Value Discovery

13.1 The Coffee Value Assessment: Purpose, Standards & Heritage Form Comparison 13.2 Extrinsic Assessment (SCA-105): Farming, Processing, Trading & Certifications 13.3 Value Discovery: Combining Physical, Descriptive, Affective & Extrinsic Results

14 SCA Flavor Wheel & Sensory Lexicon

14.1 The 2016 SCA / WCR Flavor Wheel Architecture 14.2 World Coffee Research Sensory Lexicon & Reference Standards 14.3 Using the Flavor Wheel with the CVA Descriptive Form

15 Brewing Science & Water Chemistry

15.1 Brewing Extraction Dynamics & The SCA Brewing Control Chart 15.2 Water Standards for Cupping & Brewing 15.3 Water Treatment & Cation Impact on Cup Extraction

16 Storage, Freshness & Written Exam Review

16.1 Green Coffee Storage Dynamics & Degradation Factors 16.2 Roasted Coffee Shelf Life, Degassing & Freshness 16.3 Written Exam Preparation: CVA & Cupping Procedures Review

15.2 Water Standards for Cupping & Brewing

Key Takeaways Explain This Topic AI

SCA-102 cupping water should contain no chlorine, 50–175 ppm calcium hardness and alkalinity at or near 40–70 ppm (both as CaCO3), and pH 6–8.

The 2009 SCAA brewing water standard targets 150 mg/L TDS within an acceptable 75–250 mg/L range.

The 2009 standard targets calcium hardness of 68 mg/L (4 grains) within 17–85 mg/L, total alkalinity at or near 40 mg/L, pH 7.0 within 6.5–7.5, and sodium at or near 10 mg/L.

Alkalinity, mostly bicarbonate, buffers acids, so high alkalinity makes coffee taste flat while very low alkalinity can make it sharp.

Chlorine must be absent because it can react with coffee compounds to produce medicinal chlorophenol taints.

Last updated: October 2026

A cup of brewed coffee is overwhelmingly water, so the minerals in that water shape extraction and taste. Q Graders meet two different SCA water specifications. Know which one applies.

Cupping water under SCA-102

SCA-102 section 7.4 says water for cupping should, whenever possible, fall within the acceptable range in its Table 2:

  • Characteristic SCA-102 acceptable range (cupping)
  • Chlorine None
  • Calcium hardness 50–175 ppm as CaCO3
  • Alkalinity At or near 40–70 ppm as CaCO3
  • pH 6–8

This is the specification inside the CVA standards, so it is the one to use for Q Grader cupping questions.

The 2009 SCAA brewing water standard

The SCAA's "Water for Brewing Specialty Coffee" standard, revised in November 2009, sets targets and acceptable ranges for brewing water:

  • Characteristic Target Acceptable range
  • Odor Clean, fresh, odor-free —
  • Color Clear —
  • Total chlorine 0 mg/L —
  • TDS 150 mg/L 75–250 mg/L
  • Calcium hardness 4 grains, or 68 mg/L 1–5 grains, or 17–85 mg/L
  • Total alkalinity 40 mg/L At or near 40 mg/L
  • pH 7.0 6.5–7.5
  • Sodium 10 mg/L At or near 10 mg/L

TDS in this standard is based on a "4-4-2" conductivity conversion. The target is the most desirable point, but any value inside the acceptable range meets the standard.

Comparing the two

  • Topic SCA-102 cupping range 2009 SCAA brewing standard
  • Calcium hardness 50–175 ppm 17–85 mg/L (target 68)
  • Alkalinity At or near 40–70 ppm At or near 40 mg/L
  • pH 6–8 6.5–7.5 (target 7.0)
  • Chlorine None 0 mg/L
  • TDS and sodium Not specified 150 mg/L TDS; 10 mg/L sodium

ppm and mg/L are equivalent for dilute water.

Hardness and alkalinity

Hardness measures dissolved calcium and magnesium . These ions help pull flavor compounds out of the grounds, so very soft water, such as distilled or pure reverse-osmosis water, tends to brew thin, flat, or sharp coffee.

Alkalinity measures acid-neutralizing capacity, mainly bicarbonate . Bicarbonate reacts with acids in the brew:

H + + HCO 3 − ⇌ H 2 CO 3 ⇌ H 2 O + CO 2 \text{H}^+ + \text{HCO}_3^- \rightleftharpoons \text{H}_2\text{CO}_3 \rightleftharpoons \text{H}_2\text{O} + \text{CO}_2 H + + HCO 3 − ​ ⇌ H 2 ​ CO 3 ​ ⇌ H 2 ​ O + CO 2 ​

So alkalinity buffers perceived acidity. Too much makes bright coffees taste flat and chalky. Too little leaves acidity sharp and unbalanced.

Hardness and alkalinity are both reported "as CaCO3," which makes the numbers comparable, but they measure different things. Water can be hard with low alkalinity, or soft with high alkalinity.

Sensory effects of water problems

  • Water problem Typical effect on cupping
  • Very low minerals (distilled, pure RO) Thin, hollow, sometimes sharp cups
  • Very high TDS Muddled, muted aromatics, heavy finish
  • High alkalinity Flattened acidity, dull, chalky
  • Very low alkalinity Sharp, unbuffered acidity
  • Chlorine or chloramine Medicinal, antiseptic, pool-like taint

Chlorine reacts with phenolic compounds to form chlorophenols , which are smelled at extremely low levels as medicinal or antiseptic notes. That is why both standards call for no chlorine . A medicinal or phenolic note caused by tap water could mislead a cupper into marking a "phenolic" defect that is really a water problem. Test your water before blaming the coffee.

Testing cupping water

Chlorine — use a test kit or strips, since even small amounts matter.

Total hardness and calcium hardness — titration kits or a laboratory test.

Alkalinity — titration kit.

pH — calibrated meter.

TDS — conductivity meter, noting the conversion factor it uses.

Record results in your cupping log. If water changes, for example with a new filter cartridge, retest before the next session.

Building compliant water

Labs often start from reverse-osmosis water and add minerals back. Others use filtration that reduces chlorine and adjusts hardness and alkalinity. Whatever the method, the goal is simple: water inside the SCA-102 acceptable range for cupping, measured rather than assumed.

Calcium and magnesium

Both calcium and magnesium contribute to hardness. A 2014 computational study by Hendon and colleagues in the Journal of Agricultural and Food Chemistry modeled how dissolved cations bind coffee compounds and suggested that magnesium binds many of them more strongly than calcium. Some brewers use this to justify magnesium-rich mineral recipes. Calcium also contributes to limescale in heated equipment when bicarbonate is present. For cupping, though, the measurable target is the SCA-102 range, not a particular calcium-to-magnesium ratio.

A worked water check

A lab tests its filtered tap water:

Test Result SCA-102 cupping range Meets?

  • Chlorine Not detected None Yes
  • Calcium hardness 90 ppm as CaCO3 50–175 ppm Yes
  • Alkalinity 110 ppm as CaCO3 At or near 40–70 ppm No
  • pH 7.8 6–8 Yes

The water fails on alkalinity, so the lab should expect muted acidity in its cuppings. Blending with reverse-osmosis water to bring alkalinity into range, then retesting, would be a sensible fix. Measured against the 2009 brewing standard, the same water would also miss its calcium hardness range of 17–85 mg/L.