Study guide
9.3 Roasting Problems Practical: Too Light, Too Dark, Too Fast, Too Slow
SCA Q Grader License CVA-Based Q Grader Course
Track your progress as you read
Finished sections get a check mark.
1 SCA Q Grader License & Course Structure
1.1 The SCA Q Grader License: Issuer, 2025 Transition & Course Design 1.2 The Nine Assessments: Eight Practicals and One Written Exam 1.3 Attempts, Retakes, Renewal & a Pre-Course Preparation Plan
2 Taste Physiology & Main Taste Solutions
2.1 Human Gustatory Biology & The Five Basic Tastes 2.2 Main Taste Solutions Practical: Sweet, Salty & Sour Intensities 2.3 Palate Care, Sensory Adaptation & Cognitive Biases
3 Olfaction & CVA Olfactory Category Examples
3.1 Olfaction Mechanics: Orthonasal vs. Retronasal Pathways 3.2 The CVA Olfactory Lexicon: CATA Categories & Flavor Wheel Links 3.3 Olfactory Category Examples Practical & Library Drills
4 Triangulation & Sensory Discrimination
4.1 Triangle Testing Principles & Statistical Foundations 4.2 Triangulation Practical: Setup, Execution & Practice Triads 4.3 Discrimination Strategies & Troubleshooting on the Cupping Table
5 Coffee Acids, Acidity & Sweetness
5.1 Chemistry & Sensoric Profiles of Coffee Acids 5.2 Rating Acidity & Sweetness on the CVA Forms 5.3 Acidity Dynamics vs. Roasting & Fermentation
6 SCA-102 Sample Preparation & Cupping Mechanics
6.1 SCA-102 Sample Preparation: Roast Level, Dose, Cups & Grind 6.2 SCA-102 Cupping Steps: Fragrance, Aroma, Break, Skim & Liquoring 6.3 Cupping Mechanics, Water & the Cupping Skills Practical
7 CVA Descriptive & Affective Assessments
7.1 Descriptive Assessment (SCA-103): Intensity Scales & CATA 7.2 Affective Assessment (SCA-104): Impression of Quality & the Cupping Score 7.3 Defects, Uniformity & Passing the Descriptive and Affective Practicals
8 CVA Physical Assessment & Green Coffee Defects
8.1 CVA Physical Assessment: Sample, Color, Moisture, Size & Workflow 8.2 Category 1 (Primary) Defects & Zero-Tolerance Impact 8.3 Category 2 (Secondary) Defects & Allowable Limits 8.4 Physical Sieve Screen Sizing & Green Bean Density
9 Sample Roasting & Roasting Problems
9.1 Cupping-Level Sample Roasting under SCA-102 9.2 Roasted Coffee Inspection & Quakers 9.3 Roasting Problems Practical: Too Light, Too Dark, Too Fast, Too Slow
10 Coffee Botany, Genetics & Cultivars
10.1 Taxonomy: Coffea arabica vs. Coffea canephora 10.2 Heritage Arabica Cultivars: Typica & Bourbon Lineages 10.3 Elite & Introgressed Varieties: Gesha, SLs & Hybrids 10.4 WCR Variety Catalog, F1 Hybrids & Disease Resistance
11 Coffee Processing & Fermentation Science
11.1 Washed / Wet Processing & Demucilage Dynamics 11.2 Natural / Dry Processing & Fruit Drying Dynamics 11.3 Honey / Pulped Natural Processing Variants 11.4 Anaerobic, Carbonic Maceration & Advanced Fermentations
12 Coffee Geography, Terroir & Global Origins
12.1 East African Terroirs: Ethiopia & Kenya 12.2 South American Origins: Colombia & Brazil 12.3 Central America & Caribbean: Guatemala, Costa Rica, Panama 12.4 Asia-Pacific & Wet-Hulled Dynamics: Indonesia
13 CVA Framework, Extrinsic Assessment & Value Discovery
13.1 The Coffee Value Assessment: Purpose, Standards & Heritage Form Comparison 13.2 Extrinsic Assessment (SCA-105): Farming, Processing, Trading & Certifications 13.3 Value Discovery: Combining Physical, Descriptive, Affective & Extrinsic Results
14 SCA Flavor Wheel & Sensory Lexicon
14.1 The 2016 SCA / WCR Flavor Wheel Architecture 14.2 World Coffee Research Sensory Lexicon & Reference Standards 14.3 Using the Flavor Wheel with the CVA Descriptive Form
15 Brewing Science & Water Chemistry
15.1 Brewing Extraction Dynamics & The SCA Brewing Control Chart 15.2 Water Standards for Cupping & Brewing 15.3 Water Treatment & Cation Impact on Cup Extraction
16 Storage, Freshness & Written Exam Review
16.1 Green Coffee Storage Dynamics & Degradation Factors 16.2 Roasted Coffee Shelf Life, Degassing & Freshness 16.3 Written Exam Preparation: CVA & Cupping Procedures Review
9.3 Roasting Problems Practical: Too Light, Too Dark, Too Fast, Too Slow
Key Takeaways Explain This Topic AI
The SCA says the Roasting Problems practical evaluates the ability to recognize a correct cupping roast using smell and taste alone.
The SCA standard roast targets a ground Agtron reading of 63, about 58 on whole beans.
The SCA's too-light reference is about ground Agtron 75 (whole bean about 68), and its too-dark reference is about ground Agtron 55 (whole bean about 45).
Too fast means reaching the standard color in half the normal roasting time; too slow means reaching it in twice the normal time.
SCA-102 links too-slow roasting to a baked bean and says batches with underdeveloped, burnt, or baked character should be roasted again.
Last updated: October 2026
Every CVA assessment assumes the sample was roasted correctly. If it was not, the cupper is tasting the roast rather than the green coffee. The Roasting Problems practical checks that you can catch this by smell and taste alone — without an Agtron reading or a look at the beans.
What the SCA says
The SCA's preparation page states that the exam "evaluates your ability to recognize a correct cupping roast using smell and taste alone ." Its advice:
Review the "Sample Preparation" section of the CVA Protocol or Standard SCA-102 .
Taste a variety of coffees roasted to a ground Agtron of 63 (about 58 whole bean) to learn the standard cupping roast.
Compare that standard with coffees roasted too light, too dark, too fast, or too slow .
The sample schedule includes an "incorrect preparation" session on Day 3 and the Roasting Problems practical on Day 5.
The SCA's reference table
- Profile How to prepare it (SCA)
- Optimum / standard Roast to a ground Agtron of 63 (about 58 whole bean)
- Too light Roast to a ground Agtron of about 75 (about 68 whole bean)
- Too dark Roast to a ground Agtron of about 55 (about 45 whole bean)
- Too fast Roast to a ground Agtron of 63 (about 58 whole bean) in half the normal roasting time
- Too slow Roast to a ground Agtron of 63 (about 58 whole bean) in twice the normal roasting time
Higher Agtron numbers are lighter roasts. The too-fast and too-slow references reach the same color as the standard. Only the time — and therefore the heating rate — differs, so color cannot separate them. That is why the exam relies on smell and taste.
How SCA-102 defines the problems
SCA-102 calls a roasting problem a deviation from the roasting method, when batches miss the desired roast-level range or have undergone "too fast" or "too slow" roasting:
Too fast: a roasting problem due to an excessive heating rate .
Too slow: a roasting problem due to an insufficient heating rate , which results in the so-called "baked" bean .
Such problems produce samples with underdeveloped, burnt, or baked characteristics . These can affect flavor and impression of quality and introduce noise into the assessment. SCA-102 says these batches should not be used for cupping and should be repeated .
Typical sensory signatures
These are common descriptions used in training; any individual coffee may differ. Build your own references from one green lot.
- Profile Common sensory signs
- Standard Clear origin character; acidity, sweetness, and aromatics in balance; clean finish
Too light Grain-, cereal-, or peanut-like notes; green or vegetal edges; sharper, thinner acidity; lower sweetness; sometimes astringent
Too dark Roasted, burnt, or ashy aromatics; more bitterness; muted acidity and origin character
Too fast Can combine signs of underdevelopment (grainy, vegetal, sharp) with harsher, roasty or scorched surface notes, even at standard color
Too slow (baked) Flat and dull; muted acidity and aromatics; bready, papery, or hollow character, even at standard color
How to practice
Pick one green lot with clear, clean character, such as a washed Central American coffee.
Roast the five references in the table on the same sample roaster. Record charge weight, total time, and color for each.
Rest all five for 8–24 hours and store them airtight, as SCA-102 requires.
Cup them unblinded first. Write three words for each roast profile at fragrance, aroma, and liquoring.
Cup them blind a day later. Have a colleague code the cups and include the standard more than once.
Repeat with a different lot , because roast defects show differently in a natural, a high-density washed coffee, or a low-density coffee.
Exam technique: smell and taste only
Start at fragrance. Light roasts often reveal themselves with grainy or vegetal dry fragrance; dark roasts with roasty or smoky notes.
Use the crust and break. Baked samples often smell flat or bready at the break; standard samples smell vivid.
Confirm in the cup. Look at acidity (lively or flat?), sweetness (present or hollow?), and finish (clean, ashy, or astringent?).
Do not rely on visual cues. Too fast and too slow match the standard's color by design.
Anchor on the standard. If several cups are presented, first find the one that tastes "correct," then classify the others relative to it.
Why roasting problems matter beyond this exam
A Q Grader who misses a roasting problem may blame the green coffee for a flaw the roaster created. For example, a baked roast might be judged as flat, past-crop coffee, or a too-light roast as an unripe harvest. Catching the roast first protects producers and buyers from wrong conclusions. It is also why SCA-102 requires deviations from the standard roast level to be reported to all parties.
A quick decision guide
Grainy, vegetal, sharp, thin? Think too light, or too fast.
Roasty, ashy, bitter, little acidity? Think too dark.
Flat, bready, hollow, at normal color? Think too slow (baked).
Clear origin character with balanced acidity and sweetness? That is your standard.