Study guide

9.1 Cupping-Level Sample Roasting under SCA-102

SCA Q Grader License CVA-Based Q Grader Course

Track your progress as you read

Finished sections get a check mark.

1 SCA Q Grader License & Course Structure

1.1 The SCA Q Grader License: Issuer, 2025 Transition & Course Design 1.2 The Nine Assessments: Eight Practicals and One Written Exam 1.3 Attempts, Retakes, Renewal & a Pre-Course Preparation Plan

2 Taste Physiology & Main Taste Solutions

2.1 Human Gustatory Biology & The Five Basic Tastes 2.2 Main Taste Solutions Practical: Sweet, Salty & Sour Intensities 2.3 Palate Care, Sensory Adaptation & Cognitive Biases

3 Olfaction & CVA Olfactory Category Examples

3.1 Olfaction Mechanics: Orthonasal vs. Retronasal Pathways 3.2 The CVA Olfactory Lexicon: CATA Categories & Flavor Wheel Links 3.3 Olfactory Category Examples Practical & Library Drills

4 Triangulation & Sensory Discrimination

4.1 Triangle Testing Principles & Statistical Foundations 4.2 Triangulation Practical: Setup, Execution & Practice Triads 4.3 Discrimination Strategies & Troubleshooting on the Cupping Table

5 Coffee Acids, Acidity & Sweetness

5.1 Chemistry & Sensoric Profiles of Coffee Acids 5.2 Rating Acidity & Sweetness on the CVA Forms 5.3 Acidity Dynamics vs. Roasting & Fermentation

6 SCA-102 Sample Preparation & Cupping Mechanics

6.1 SCA-102 Sample Preparation: Roast Level, Dose, Cups & Grind 6.2 SCA-102 Cupping Steps: Fragrance, Aroma, Break, Skim & Liquoring 6.3 Cupping Mechanics, Water & the Cupping Skills Practical

7 CVA Descriptive & Affective Assessments

7.1 Descriptive Assessment (SCA-103): Intensity Scales & CATA 7.2 Affective Assessment (SCA-104): Impression of Quality & the Cupping Score 7.3 Defects, Uniformity & Passing the Descriptive and Affective Practicals

8 CVA Physical Assessment & Green Coffee Defects

8.1 CVA Physical Assessment: Sample, Color, Moisture, Size & Workflow 8.2 Category 1 (Primary) Defects & Zero-Tolerance Impact 8.3 Category 2 (Secondary) Defects & Allowable Limits 8.4 Physical Sieve Screen Sizing & Green Bean Density

9 Sample Roasting & Roasting Problems

9.1 Cupping-Level Sample Roasting under SCA-102 9.2 Roasted Coffee Inspection & Quakers 9.3 Roasting Problems Practical: Too Light, Too Dark, Too Fast, Too Slow

10 Coffee Botany, Genetics & Cultivars

10.1 Taxonomy: Coffea arabica vs. Coffea canephora 10.2 Heritage Arabica Cultivars: Typica & Bourbon Lineages 10.3 Elite & Introgressed Varieties: Gesha, SLs & Hybrids 10.4 WCR Variety Catalog, F1 Hybrids & Disease Resistance

11 Coffee Processing & Fermentation Science

11.1 Washed / Wet Processing & Demucilage Dynamics 11.2 Natural / Dry Processing & Fruit Drying Dynamics 11.3 Honey / Pulped Natural Processing Variants 11.4 Anaerobic, Carbonic Maceration & Advanced Fermentations

12 Coffee Geography, Terroir & Global Origins

12.1 East African Terroirs: Ethiopia & Kenya 12.2 South American Origins: Colombia & Brazil 12.3 Central America & Caribbean: Guatemala, Costa Rica, Panama 12.4 Asia-Pacific & Wet-Hulled Dynamics: Indonesia

13 CVA Framework, Extrinsic Assessment & Value Discovery

13.1 The Coffee Value Assessment: Purpose, Standards & Heritage Form Comparison 13.2 Extrinsic Assessment (SCA-105): Farming, Processing, Trading & Certifications 13.3 Value Discovery: Combining Physical, Descriptive, Affective & Extrinsic Results

14 SCA Flavor Wheel & Sensory Lexicon

14.1 The 2016 SCA / WCR Flavor Wheel Architecture 14.2 World Coffee Research Sensory Lexicon & Reference Standards 14.3 Using the Flavor Wheel with the CVA Descriptive Form

15 Brewing Science & Water Chemistry

15.1 Brewing Extraction Dynamics & The SCA Brewing Control Chart 15.2 Water Standards for Cupping & Brewing 15.3 Water Treatment & Cation Impact on Cup Extraction

16 Storage, Freshness & Written Exam Review

16.1 Green Coffee Storage Dynamics & Degradation Factors 16.2 Roasted Coffee Shelf Life, Degassing & Freshness 16.3 Written Exam Preparation: CVA & Cupping Procedures Review

9.1 Cupping-Level Sample Roasting under SCA-102

Key Takeaways Explain This Topic AI

SCA-102 allows different roasting technologies and conditions as long as samples reach the desired roast level without roasting problems.

Roast level should be measured by colorimetry or infrared spectrometry; dry-matter loss or volume increase may be used only if correlated with those methods.

Cupping-level roast is ground L* 26–29, about Agtron/SCA tile #65, or a reading of 63 on the Agtron Gourmet scale.

Samples must be air-cooled immediately without water quenching, then stored airtight at about 20°C in a cool, dark place.

Coffee should rest 8 to 24 hours after roasting, and any deviation from the standard roast level must be reported to all parties.

Last updated: October 2026

Sample roasting is not production roasting. Its job is to reveal the green coffee as neutrally as possible, so that differences between samples come from the coffees and not from the roast. SCA-102 section 5.1 sets the rules.

The aim of sample roasting

SCA-102 says sample roasting "shall achieve the desired roast level while avoiding 'roasting problems,' and keeping roasting conditions and parameters as even as possible for all samples." It also says different roasting technologies and roasting conditions may be used, as long as this purpose is accomplished . The standard does not mandate a particular roaster, batch size, or total time.

Measuring roast level

Methods. SCA-102 says roast level should be controlled through:

Colorimetry , for example CIELAB or the Agtron/SCA Roast Color Classification System (the tile set); or

Infrared spectrometry , for example an Agtron device.

Alternatives such as dry-matter loss or volume increase of the bean may be used if correlations with colorimetry or spectrometry have been established .

Target. The roast level for specialty cupping should be what is usually described as medium :

  • Expression Cupping-level target
  • Ground-coffee lightness (CIELAB) L* 26–29
  • Agtron/SCA tile About #65
  • Roast meter 63 on the Agtron "Gourmet" scale, or the equivalent on other meters
  • SCA Q Grader prep page Ground Agtron 63, about 58 whole bean

Measurement care. When using roast meters, control the grind level and the coffee temperature . Samples with a lot of chaff will show a larger error. Measure each batch, not only the first.

Deviations. If a coffee is cupped at a roast level other than medium, or any other deviation from the standard occurs, report it to all parties involved .

Avoiding roasting problems

SCA-102 identifies the two most common problems as roasting too fast or too slow compared with the "optimum" roasting rate of a specific roasting technology:

Too fast — an excessive heating rate.

Too slow — an insufficient heating rate, giving the so-called baked bean.

Batches that miss the roast-level range or show underdeveloped, burnt, or baked characteristics should not be used for cupping and should be roasted again . Chapter 9.3 shows how to recognize these problems by taste.

The heritage 2004 cupping protocol gave a total roast-time window for sample roasting. SCA-102 does not set a clock time. Instead, it judges speed against the optimum for your roaster. Learn what normal looks like on your machine, then treat half that time as "too fast" and double it as "too slow," as the SCA's Roasting Problems reference table does.

Consistency across samples

SCA-102 says the effect of roasting on flavor variability shall be minimized, so that flavor differences come from the green coffees and not from roasting conditions. In practice:

Use the same charge weight for every batch on a given roaster.

Bring the roaster to a stable starting temperature . Many labs roast a warm-up batch after an idle period.

Log every batch : charge temperature, key times, total time, and final color.

Re-roast any batch whose color misses the target window.

Cooling, storage, and rest

  • Step SCA-102 requirement
  • Cooling Air-cool immediately, without water quenching
  • Storage When at room temperature (about 20°C), store in airtight containers or non-permeable bags
  • Environment A cool, dark place
  • Rest 8 to 24 hours after roasting before cupping
  • Late cupping If cupping cannot happen within 8–24 hours, take measures to minimize flavor degradation

Water quenching is excluded because it adds moisture to the beans and changes them in ways unrelated to the green coffee.

What happens during a sample roast

A short reminder of roast stages helps you read roasting problems:

Drying. The beans lose moisture and change from green toward yellow.

Browning. Maillard reactions and sugar caramelization build color and aroma.

First crack. Pressure from steam and gases fractures the bean structure, with an audible crack. Cupping-level roasts finish after first crack but well before a dark roast.

A roast that rushes through these stages risks underdevelopment inside the bean and scorched or roasty surface notes. A roast that crawls through them tends to taste flat and baked even at the correct final color.

A practical routine for Q Grader candidates

Practice roasting one green lot to the target color several times until you can repeat it within a narrow color range.

Then roast the four problem profiles from the SCA table on purpose, and taste them beside the standard.

Keep a roast log of these sessions; it will help you in the Roasting Problems practical and in daily quality control.

Example roast log entry

  • Field Entry
  • Sample Washed Colombian, lot 24-117
  • Charge weight Same as every other batch on this roaster
  • Total time Recorded in minutes and seconds
  • First crack Time noted
  • Ground color 63 Agtron Gourmet (target met)
  • Roast date and time Logged, so cupping falls 8–24 hours later
  • Notes No visible tipping or scorching; even color

Logging the same fields every time lets you spot a drifting roaster before it affects your assessments.