Study guide

6.3 Cupping Mechanics, Water & the Cupping Skills Practical

SCA Q Grader License CVA-Based Q Grader Course

Track your progress as you read

Finished sections get a check mark.

1 SCA Q Grader License & Course Structure

1.1 The SCA Q Grader License: Issuer, 2025 Transition & Course Design 1.2 The Nine Assessments: Eight Practicals and One Written Exam 1.3 Attempts, Retakes, Renewal & a Pre-Course Preparation Plan

2 Taste Physiology & Main Taste Solutions

2.1 Human Gustatory Biology & The Five Basic Tastes 2.2 Main Taste Solutions Practical: Sweet, Salty & Sour Intensities 2.3 Palate Care, Sensory Adaptation & Cognitive Biases

3 Olfaction & CVA Olfactory Category Examples

3.1 Olfaction Mechanics: Orthonasal vs. Retronasal Pathways 3.2 The CVA Olfactory Lexicon: CATA Categories & Flavor Wheel Links 3.3 Olfactory Category Examples Practical & Library Drills

4 Triangulation & Sensory Discrimination

4.1 Triangle Testing Principles & Statistical Foundations 4.2 Triangulation Practical: Setup, Execution & Practice Triads 4.3 Discrimination Strategies & Troubleshooting on the Cupping Table

5 Coffee Acids, Acidity & Sweetness

5.1 Chemistry & Sensoric Profiles of Coffee Acids 5.2 Rating Acidity & Sweetness on the CVA Forms 5.3 Acidity Dynamics vs. Roasting & Fermentation

6 SCA-102 Sample Preparation & Cupping Mechanics

6.1 SCA-102 Sample Preparation: Roast Level, Dose, Cups & Grind 6.2 SCA-102 Cupping Steps: Fragrance, Aroma, Break, Skim & Liquoring 6.3 Cupping Mechanics, Water & the Cupping Skills Practical

7 CVA Descriptive & Affective Assessments

7.1 Descriptive Assessment (SCA-103): Intensity Scales & CATA 7.2 Affective Assessment (SCA-104): Impression of Quality & the Cupping Score 7.3 Defects, Uniformity & Passing the Descriptive and Affective Practicals

8 CVA Physical Assessment & Green Coffee Defects

8.1 CVA Physical Assessment: Sample, Color, Moisture, Size & Workflow 8.2 Category 1 (Primary) Defects & Zero-Tolerance Impact 8.3 Category 2 (Secondary) Defects & Allowable Limits 8.4 Physical Sieve Screen Sizing & Green Bean Density

9 Sample Roasting & Roasting Problems

9.1 Cupping-Level Sample Roasting under SCA-102 9.2 Roasted Coffee Inspection & Quakers 9.3 Roasting Problems Practical: Too Light, Too Dark, Too Fast, Too Slow

10 Coffee Botany, Genetics & Cultivars

10.1 Taxonomy: Coffea arabica vs. Coffea canephora 10.2 Heritage Arabica Cultivars: Typica & Bourbon Lineages 10.3 Elite & Introgressed Varieties: Gesha, SLs & Hybrids 10.4 WCR Variety Catalog, F1 Hybrids & Disease Resistance

11 Coffee Processing & Fermentation Science

11.1 Washed / Wet Processing & Demucilage Dynamics 11.2 Natural / Dry Processing & Fruit Drying Dynamics 11.3 Honey / Pulped Natural Processing Variants 11.4 Anaerobic, Carbonic Maceration & Advanced Fermentations

12 Coffee Geography, Terroir & Global Origins

12.1 East African Terroirs: Ethiopia & Kenya 12.2 South American Origins: Colombia & Brazil 12.3 Central America & Caribbean: Guatemala, Costa Rica, Panama 12.4 Asia-Pacific & Wet-Hulled Dynamics: Indonesia

13 CVA Framework, Extrinsic Assessment & Value Discovery

13.1 The Coffee Value Assessment: Purpose, Standards & Heritage Form Comparison 13.2 Extrinsic Assessment (SCA-105): Farming, Processing, Trading & Certifications 13.3 Value Discovery: Combining Physical, Descriptive, Affective & Extrinsic Results

14 SCA Flavor Wheel & Sensory Lexicon

14.1 The 2016 SCA / WCR Flavor Wheel Architecture 14.2 World Coffee Research Sensory Lexicon & Reference Standards 14.3 Using the Flavor Wheel with the CVA Descriptive Form

15 Brewing Science & Water Chemistry

15.1 Brewing Extraction Dynamics & The SCA Brewing Control Chart 15.2 Water Standards for Cupping & Brewing 15.3 Water Treatment & Cation Impact on Cup Extraction

16 Storage, Freshness & Written Exam Review

16.1 Green Coffee Storage Dynamics & Degradation Factors 16.2 Roasted Coffee Shelf Life, Degassing & Freshness 16.3 Written Exam Preparation: CVA & Cupping Procedures Review

6.3 Cupping Mechanics, Water & the Cupping Skills Practical

Key Takeaways Explain This Topic AI

SCA-102 calls for cupping tables of at least 0.90 m² for six people, and cuppers move around a stationary table.

A cupping session should contain no more than six coffees, and fewer when the combined form is used.

SCA-102 cupping water should contain no chlorine, 50–175 ppm calcium hardness as CaCO3, alkalinity at or near 40–70 ppm as CaCO3, and pH 6–8.

Under the sanitary modified protocol, each sample has a designated spoon that transfers brew to a personal vessel for slurping.

The Cupping Skills practical evaluates conduct during cuppings, not setup, so focus, hygiene, and independence matter.

Last updated: October 2026

Section 7 of SCA-102, "Brewing and Cupping Mechanics," covers the cupping room. These details appear on the written exam and frame what examiners watch for in the Cupping Skills practical.

Tables and session size

Tables: for six people, a surface of at least 0.90 m² , at a comfortable height. The table is stationary , and cuppers move around it .

Coffees per session: a typical session holds about 3–6 coffees, and the maximum should be 6 . With six coffees and six cuppers, each cupper stands in front of one sample while the others taste elsewhere.

Combined form: cuppers using the combined descriptive-and-affective form should reduce the number of coffees to allow for the more thorough assessment.

Brewing all coffees together

Brew all coffees in a session at the same time. Ideally each cupper pours one sample's cups with their own carafe .

If there are not enough carafes or cuppers, use at least one large carafe for every three coffees .

Brew all cups of each coffee in sequence , using a spouted carafe and pouring to the rim.

Water for cupping

SCA-102 says cupping water should, whenever possible, fall within the "acceptable range" of its Table 2:

  • Characteristic Acceptable range for cupping water
  • Chlorine None
  • Calcium hardness 50–175 ppm as CaCO3
  • Alkalinity At or near 40–70 ppm as CaCO3
  • pH 6–8

This is the cupping water specification inside the CVA standard. The older 2009 SCAA "Water for Brewing Specialty Coffee" standard is a separate brewing benchmark with different targets; Section 15.2 compares the two.

Cups per sample

Descriptive: if cupping, 3–5 cups per coffee. More cuppers need more brew, from larger vessels or more cups. If batch brewing, one cup per taster.

Affective: five cups per coffee per table , so uniformity can be judged consistently.

The sanitary modified protocol

Cuppers may modify the protocol to avoid direct contact between the brew and each cupper's mouth:

Each sample gets a designated spoon that stays with that cup.

The designated spoon transfers brew into a personal vessel , such as another spoon or a shot glass.

The cupper slurps from the personal vessel.

Whichever protocol is used, the spoon is rinsed in hot water every time before it is dipped into a cupping vessel .

The Cupping Skills practical

The SCA says this exam evaluates your conduct during cuppings . It does not cover setup , but you must show a high level of focus and professionalism during the course's cupping activities. The SCA's advice:

Everyone should review SCA-102 to understand expected practices.

Newcomers should take an Intro to Cupping workshop and look for public cuppings run by local coffee businesses.

If you have a cupping lab at work, practice setting up, conducting, and cleaning up sessions.

Video tutorials can help, but they are no substitute for training from an experienced professional.

A conduct checklist

The SCA does not publish a scoring rubric, so this checklist turns SCA-102 and SCA-104 into observable behaviors:

Behavior Why it matters

Rinse your spoon in hot water before every dip SCA-102 requires it; it prevents cross-contamination between cups

  • Never return a used spoon to a cup without rinsing Saliva and residue spoil the sample for everyone
  • Follow the table's order and pace Keeps samples comparable and avoids crowding
  • Break and skim only the cups assigned to you Matches the split-the-cups practice in SCA-102
  • Slurp to cover tongue and palate, then spit Gives full retronasal perception without caffeine overload
  • Work silently; keep reactions neutral SCA-104 says affective ratings must not be influenced by other cuppers
  • Complete your form before any discussion Protects the independence of your data
  • Keep your area clean and your spittoon off the cupping surface Professional hygiene and safety around hot cups
  • Personal preparation on cupping days

These are good laboratory habits rather than SCA rules:

Avoid perfume, scented lotions, and strongly flavored foods or mint before cupping; they affect you and the people around you.

Arrive rested and hydrated, and eat a plain meal well before the session.

Bring a reliable spoon, a spittoon cup, and a pen. Use the forms your instructor provides.

Putting it together

A strong Cupping Skills performance looks calm and repeatable: the same slurp, the same rinse, the same route around the table, and no shortcuts when time runs short. Practice until the mechanics are automatic, so that your attention stays on the coffee.

Why these mechanics protect the data

Each SCA-102 rule removes a source of noise from the comparison between coffees:

Brewing all coffees at once keeps every sample at a similar temperature and stage of extraction when you taste it.

One carafe per cupper , or at least one large carafe per three coffees, keeps pouring time short so the first and last cups are not far apart.

Six coffees at most limits fatigue, so the last coffee on the table gets the same attention as the first.

Identical cups and rim-full pours keep the dose ratio identical, which is what makes uniformity judgments meaningful.

Rinsing spoons in hot water every time stops one coffee from flavoring the next.

When you understand the reason for each rule, you are less likely to cut corners under time pressure.