Study guide

6.1 SCA-102 Sample Preparation: Roast Level, Dose, Cups & Grind

SCA Q Grader License CVA-Based Q Grader Course

Track your progress as you read

Finished sections get a check mark.

1 SCA Q Grader License & Course Structure

1.1 The SCA Q Grader License: Issuer, 2025 Transition & Course Design 1.2 The Nine Assessments: Eight Practicals and One Written Exam 1.3 Attempts, Retakes, Renewal & a Pre-Course Preparation Plan

2 Taste Physiology & Main Taste Solutions

2.1 Human Gustatory Biology & The Five Basic Tastes 2.2 Main Taste Solutions Practical: Sweet, Salty & Sour Intensities 2.3 Palate Care, Sensory Adaptation & Cognitive Biases

3 Olfaction & CVA Olfactory Category Examples

3.1 Olfaction Mechanics: Orthonasal vs. Retronasal Pathways 3.2 The CVA Olfactory Lexicon: CATA Categories & Flavor Wheel Links 3.3 Olfactory Category Examples Practical & Library Drills

4 Triangulation & Sensory Discrimination

4.1 Triangle Testing Principles & Statistical Foundations 4.2 Triangulation Practical: Setup, Execution & Practice Triads 4.3 Discrimination Strategies & Troubleshooting on the Cupping Table

5 Coffee Acids, Acidity & Sweetness

5.1 Chemistry & Sensoric Profiles of Coffee Acids 5.2 Rating Acidity & Sweetness on the CVA Forms 5.3 Acidity Dynamics vs. Roasting & Fermentation

6 SCA-102 Sample Preparation & Cupping Mechanics

6.1 SCA-102 Sample Preparation: Roast Level, Dose, Cups & Grind 6.2 SCA-102 Cupping Steps: Fragrance, Aroma, Break, Skim & Liquoring 6.3 Cupping Mechanics, Water & the Cupping Skills Practical

7 CVA Descriptive & Affective Assessments

7.1 Descriptive Assessment (SCA-103): Intensity Scales & CATA 7.2 Affective Assessment (SCA-104): Impression of Quality & the Cupping Score 7.3 Defects, Uniformity & Passing the Descriptive and Affective Practicals

8 CVA Physical Assessment & Green Coffee Defects

8.1 CVA Physical Assessment: Sample, Color, Moisture, Size & Workflow 8.2 Category 1 (Primary) Defects & Zero-Tolerance Impact 8.3 Category 2 (Secondary) Defects & Allowable Limits 8.4 Physical Sieve Screen Sizing & Green Bean Density

9 Sample Roasting & Roasting Problems

9.1 Cupping-Level Sample Roasting under SCA-102 9.2 Roasted Coffee Inspection & Quakers 9.3 Roasting Problems Practical: Too Light, Too Dark, Too Fast, Too Slow

10 Coffee Botany, Genetics & Cultivars

10.1 Taxonomy: Coffea arabica vs. Coffea canephora 10.2 Heritage Arabica Cultivars: Typica & Bourbon Lineages 10.3 Elite & Introgressed Varieties: Gesha, SLs & Hybrids 10.4 WCR Variety Catalog, F1 Hybrids & Disease Resistance

11 Coffee Processing & Fermentation Science

11.1 Washed / Wet Processing & Demucilage Dynamics 11.2 Natural / Dry Processing & Fruit Drying Dynamics 11.3 Honey / Pulped Natural Processing Variants 11.4 Anaerobic, Carbonic Maceration & Advanced Fermentations

12 Coffee Geography, Terroir & Global Origins

12.1 East African Terroirs: Ethiopia & Kenya 12.2 South American Origins: Colombia & Brazil 12.3 Central America & Caribbean: Guatemala, Costa Rica, Panama 12.4 Asia-Pacific & Wet-Hulled Dynamics: Indonesia

13 CVA Framework, Extrinsic Assessment & Value Discovery

13.1 The Coffee Value Assessment: Purpose, Standards & Heritage Form Comparison 13.2 Extrinsic Assessment (SCA-105): Farming, Processing, Trading & Certifications 13.3 Value Discovery: Combining Physical, Descriptive, Affective & Extrinsic Results

14 SCA Flavor Wheel & Sensory Lexicon

14.1 The 2016 SCA / WCR Flavor Wheel Architecture 14.2 World Coffee Research Sensory Lexicon & Reference Standards 14.3 Using the Flavor Wheel with the CVA Descriptive Form

15 Brewing Science & Water Chemistry

15.1 Brewing Extraction Dynamics & The SCA Brewing Control Chart 15.2 Water Standards for Cupping & Brewing 15.3 Water Treatment & Cation Impact on Cup Extraction

16 Storage, Freshness & Written Exam Review

16.1 Green Coffee Storage Dynamics & Degradation Factors 16.2 Roasted Coffee Shelf Life, Degassing & Freshness 16.3 Written Exam Preparation: CVA & Cupping Procedures Review

6.1 SCA-102 Sample Preparation: Roast Level, Dose, Cups & Grind

Key Takeaways Explain This Topic AI

SCA Standard 102-2024 supersedes the 2004 SCA Cupping Protocol and heritage standards for cupping ratio, water temperature, water, grind, roast, room size, spoons, and tables.

Cupping-level roast is ground-coffee lightness L* 26–29, about Agtron/SCA tile #65, or a reading of 63 on the Agtron Gourmet scale.

The dose is 8.25 g of coffee per 150 mL of cup capacity, weighed separately for each cup with a ±0.2 g tolerance.

Cupping vessels must be identical tempered glass or ceramic cups of 200–350 mL with a top diameter of 75–90 mm.

Each cup is ground separately so that 70–75% of the grounds pass a US No. 20 sieve with an 850 µm aperture.

Last updated: October 2026

The written exam covers cupping procedures "including setup" in detail, and three practicals depend on correctly prepared samples. The governing document is SCA Standard 102-2024, Coffee Value Assessment: Sample Preparation and Tasting Mechanics (SCA-102). Learn its numbers exactly.

What SCA-102 replaces

SCA-102 states that it supersedes these heritage SCA standards:

  • Coffee to Water Ratio for Cupping
  • Cupping Water Temperature
  • Cupping Water
  • Grind for Cupping
  • Roast for Cupping and Roast Level for Cupping
  • Cupping Room Size, Cupping Spoons, and Cupping Tables
  • SCA Cupping Protocol (2004 and any later editions)

It is designed for green Coffea arabica and may be adapted to other states of coffee and other Coffea species. It covers mechanics — preparing and tasting — while the rating rules sit in SCA-103 (descriptive) and SCA-104 (affective).

Roasting the sample

Roast level. The roast for specialty cupping should be what is usually described as medium . SCA-102 defines cupping-level roast as:

Ground-coffee lightness L* of 26–29 in CIELAB coordinates, corresponding approximately to Agtron/SCA Roast Color Classification System tile #65 ; or

A target reading of 63 on the Agtron "Gourmet" scale , or its equivalent on other roast meters.

Roast level should be controlled by colorimetry or infrared spectrometry. Dry-matter loss or bean volume increase may be used if they are correlated with color. When using roast meters, control grind level and coffee temperature; samples with a lot of chaff show larger error. If a coffee is cupped at another roast level, report the deviation to all parties.

The SCA's Q Grader preparation page expresses the same target as ground Agtron 63, about 58 whole bean .

Roasting problems. Roasts that miss the target range, or that roasted too fast (excessive heating rate) or too slow (insufficient heating rate, giving a "baked" bean), can show underdeveloped, burnt, or baked character. SCA-102 says such batches should not be used for cupping and should be repeated . Chapter 9 covers these problems in detail.

Consistency, cooling, and rest.

Keep all roasting parameters as constant as possible from sample to sample.

Air-cool immediately, without water quenching.

At about 20°C , store samples in airtight containers or non-permeable bags in a cool, dark place.

Rest 8 to 24 hours after roasting. If cupping cannot happen in that window, take steps to minimize flavor degradation.

Cups and dose

Vessels. Tempered glass or ceramic, 200–350 mL , top diameter 75–90 mm . All cups must be identical in volume, dimensions, and material.

Dose. Measure the cup's volume to the rim , for example by weighing the room-temperature water it holds and using 1 g ≈ 1 mL. Then dose 8.25 g of coffee per 150 mL of vessel capacity . Weigh the beans for each cup separately on a scale accurate to 0.1 g ; because of bean size, a tolerance of ±0.2 g applies.

dose (g) = cup capacity (mL) × 8.25 150 = cup capacity × 0.055 \text{dose (g)} = \text{cup capacity (mL)} \times \frac{8.25}{150} = \text{cup capacity} \times 0.055 dose (g) = cup capacity (mL) × 150 8.25 ​ = cup capacity × 0.055

  • Cup capacity to rim Dose Acceptable range (±0.2 g)
  • 200 mL 11.00 g 10.80–11.20 g
  • 240 mL 13.20 g 13.00–13.40 g
  • 250 mL 13.75 g 13.55–13.95 g
  • 300 mL 16.50 g 16.30–16.70 g
  • 350 mL 19.25 g 19.05–19.45 g

Dosing 8.25 g into a 240 mL cup would make a much weaker brew than the standard intends, which is why the ratio, not the 8.25 g figure alone, is what matters.

Grinding

Grind as close to cupping time as practical .

Grind each cup separately .

Grind so that 70–75% of the grounds pass a US standard No. 20 sieve (850 µm) . This is slightly coarser than typical paper-filter drip.

Set the grinder before the session. Before each new sample, grind a small amount of that sample to displace grounds left from the previous coffee.

How many cups per sample

  • Assessment Method Cups or brew
  • Affective (SCA-104) Cupping required 5 cups per sample , so uniformity can be judged

Descriptive (SCA-103) Cupping or batch brew 3–5 cups if cupping; if batch brewing, 55–60 g per liter (about 17:1 to 18:1 water to coffee)

When batch brewing for descriptive work, keep a small amount of dry grounds aside for fragrance assessment. Use a grind specific to the brewing method, for example a French press grind.

Setup checklist

Confirm roast color and rest time for every sample.

Measure cup capacity and calculate the dose.

Weigh whole beans for each cup separately (±0.2 g).

Purge the grinder with each new sample; grind each cup separately.

Arrange the coded cups so that all coffees can be brewed and assessed in parallel (Section 6.2).

Check that the water meets the SCA-102 water specification (Section 6.3).