Study guide

CGL Limits of Insurance and Aggregates

South Dakota Property & Casualty Insurance State

Track your progress as you read

Finished sections get a check mark.

1 Standalone Coverage Map

Standalone Coverage Map

2 Introduction: South Dakota Property & Casualty Insurance Exam Overview

South Dakota Property & Casualty Exam Overview

3 National Portion: Insurance Fundamentals

1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority

4 National Portion: Property Insurance Concepts

2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses

5 National Portion: Dwelling Policies (DP)

3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage

6 National Portion: Homeowners Policies - Forms & Section I

Homeowners Forms HO-2 through HO-8 and Eligibility Section I Coverages A-D and Additional Coverages Section I Perils Insured Against and Exclusions Replacement Cost vs. ACV and Loss Settlement in Homeowners

7 National Portion: Homeowners Policies - Section II & Endorsements

5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)

8 National Portion: Personal Auto Policy - Liability & Injury

6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists

9 National Portion: Personal Auto Policy - Physical Damage & Duties

7.1 Part D: Coverage for Damage to Your Auto 7.2 Part D Exclusions and Part E: Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts

10 National Portion: Liability Insurance Concepts

8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury

11 National Portion: Commercial Property Insurance

9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP

12 National Portion: Commercial General Liability - Coverages

10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments

13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions

CGL Limits of Insurance and Aggregates Occurrence vs. Claims-Made CGL and Retroactive Dates Key CGL Exclusions and Endorsements

14 National Portion: Commercial Auto Insurance

12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements

15 National Portion: Workers Compensation

13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements

16 National Portion: Other Commercial Lines - BOP, Crime & Marine

14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (hull, cargo, freight, P&I)

17 National Portion: Other Commercial Lines - Specialty & Professional

15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability

18 National Portion: Other Commercial Lines - Surety, Flood & Specialty

16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines

19 National Portion: Insurance Regulation & Market Conduct

17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations

20 National Portion: Ethics & Unfair Trade Practices

18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection

21 Chapter 1: South Dakota P&C Insurance Regulation & Licensing

1.1 South Dakota Division of Insurance 1.2 South Dakota P&C Producer Licensing Requirements 1.3 South Dakota Producer Responsibilities & Prohibited Practices

22 Chapter 2: South Dakota Property Insurance

2.1 South Dakota Homeowners Insurance 2.2 South Dakota Commercial Property Insurance

23 Chapter 3: South Dakota Casualty & Auto Insurance

3.1 South Dakota Auto Insurance Requirements 3.2 South Dakota Liability Insurance

24 Chapter 4: South Dakota Ethics & Professional Conduct

4.1 Ethical Practices and Consumer Protection 4.2 Common Ethical Scenarios and Applications

CGL Limits of Insurance and Aggregates

Key Takeaways Explain This Topic AI

The ISO CGL (CG 00 01) has six limits: General Aggregate, Products-Completed Operations Aggregate, Personal & Advertising Injury, Each Occurrence, Damage to Premises Rented to You ($100,000), and Medical Expense ($5,000).

Two separate aggregates exist: products-completed operations claims draw down their own aggregate and do not reduce the general aggregate.

The Each Occurrence limit caps the sum of Coverage A damages plus Coverage C medical payments - Med Pay is not paid on top of it.

Defense and other supplementary payments are paid in addition to the limits under the standard CGL.

Endorsements CG 25 03 and CG 25 04 create per-project aggregates so one project's losses cannot exhaust the shared general aggregate.

Last updated: June 2026

How the ISO CGL Stacks Its Six Limits

The ISO Commercial General Liability Coverage Form ( CG 00 01 , current 04 13 edition) does not use one flat limit. Its Section III - Limits Of Insurance creates a tiered structure of six interlocking limits. Exam questions almost always test whether you can identify which limit caps a given loss and how the two aggregates erode the per-occurrence limits.

The six limits, in the order they appear on the form, are:

General Aggregate Limit - the most the insurer pays for the sum of: medical payments, damages under Coverage A (bodily injury/property damage), and damages under Coverage B (personal and advertising injury), EXCEPT damages from the products-completed operations hazard.

Products-Completed Operations Aggregate Limit - a separate aggregate for products and completed-operations claims; it is NOT reduced by, and does not reduce, the general aggregate.

Personal and Advertising Injury Limit - the most paid under Coverage B for any one person or organization.

Each Occurrence Limit - the most paid for the sum of Coverage A damages and Coverage C medical payments arising from any one occurrence.

Damage To Premises Rented To You Limit - default $100,000 any one premises (fire, and since the 04 13 edition, other perils for premises rented 7 days or fewer).

Medical Expense Limit - default $5,000 any one person under Coverage C.

The Two Aggregates Are the Tested Trap

The single most tested CGL concept is that there are two separate aggregates . Claims arising from the insured's products or completed work draw down the products-completed operations aggregate . Everything else (premises/operations, Coverage B, medical payments) draws down the general aggregate . A contractor who exhausts the general aggregate on slip-and-fall claims still has the full products-completed operations aggregate available for a defective-work claim, and vice versa.

A classic exam declarations page reads like this:

  • Limit Amount
  • General Aggregate $2,000,000
  • Products-Completed Operations Aggregate $2,000,000
  • Personal & Advertising Injury (any one person/org) $1,000,000
  • Each Occurrence $1,000,000
  • Damage to Premises Rented to You $100,000
  • Medical Expense (any one person) $5,000

The Six Limits in Practice and How Aggregates Erode

The CGL stacks six limits, and the tested interactions are between the occurrence limit and the two aggregates .

  • Limit Caps
  • General Aggregate Total of Coverage A (non-products), B, and C for the term
  • Products-Completed Operations Aggregate Total for products/completed-operations claims
  • Each Occurrence A + C for any one occurrence
  • Personal & Advertising Injury One person/organization (Coverage B)
  • Damage to Premises Rented to You Fire (and limited other) damage to rented premises
  • Medical Expense Any one person (Coverage C)

Exam trap: Products-completed-operations claims erode their own aggregate, not the General Aggregate. A series of product claims can exhaust the products aggregate while the General Aggregate is untouched - and vice versa.

Worked Erosion Example

A contractor has a $1M each-occurrence / $2M general / $2M products CGL. Three premises occurrences cost $700K, $800K, and $900K. The first two pay in full ($1.5M), but the General Aggregate has only $500K left, so the third $900K claim pays just $500K - the each-occurrence limit no longer matters once the aggregate is nearly gone. Defense costs are paid in addition and do not erode these limits.