Study guide
13.2 Part One (Workers Comp) and Part Two (Employers Liability)
South Dakota Property & Casualty Insurance State
Track your progress as you read
Finished sections get a check mark.
1 Standalone Coverage Map
Standalone Coverage Map
2 Introduction: South Dakota Property & Casualty Insurance Exam Overview
South Dakota Property & Casualty Exam Overview
3 National Portion: Insurance Fundamentals
1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority
4 National Portion: Property Insurance Concepts
2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses
5 National Portion: Dwelling Policies (DP)
3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage
6 National Portion: Homeowners Policies - Forms & Section I
Homeowners Forms HO-2 through HO-8 and Eligibility Section I Coverages A-D and Additional Coverages Section I Perils Insured Against and Exclusions Replacement Cost vs. ACV and Loss Settlement in Homeowners
7 National Portion: Homeowners Policies - Section II & Endorsements
5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)
8 National Portion: Personal Auto Policy - Liability & Injury
6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists
9 National Portion: Personal Auto Policy - Physical Damage & Duties
7.1 Part D: Coverage for Damage to Your Auto 7.2 Part D Exclusions and Part E: Duties After an Accident 7.3 Part F General Provisions, Endorsements, and No-Fault Concepts
10 National Portion: Liability Insurance Concepts
8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury
11 National Portion: Commercial Property Insurance
9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP
12 National Portion: Commercial General Liability - Coverages
10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments
13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions
CGL Limits of Insurance and Aggregates Occurrence vs. Claims-Made CGL and Retroactive Dates Key CGL Exclusions and Endorsements
14 National Portion: Commercial Auto Insurance
12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements
15 National Portion: Workers Compensation
13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements
16 National Portion: Other Commercial Lines - BOP, Crime & Marine
14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (hull, cargo, freight, P&I)
17 National Portion: Other Commercial Lines - Specialty & Professional
15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability
18 National Portion: Other Commercial Lines - Surety, Flood & Specialty
16.1 Surety and Fidelity Bonds 16.2 National Flood Insurance Program (NFIP) 16.3 Cyber, Aviation, and Other Specialty Lines
19 National Portion: Insurance Regulation & Market Conduct
17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations
20 National Portion: Ethics & Unfair Trade Practices
18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection
21 Chapter 1: South Dakota P&C Insurance Regulation & Licensing
1.1 South Dakota Division of Insurance 1.2 South Dakota P&C Producer Licensing Requirements 1.3 South Dakota Producer Responsibilities & Prohibited Practices
22 Chapter 2: South Dakota Property Insurance
2.1 South Dakota Homeowners Insurance 2.2 South Dakota Commercial Property Insurance
23 Chapter 3: South Dakota Casualty & Auto Insurance
3.1 South Dakota Auto Insurance Requirements 3.2 South Dakota Liability Insurance
24 Chapter 4: South Dakota Ethics & Professional Conduct
4.1 Ethical Practices and Consumer Protection 4.2 Common Ethical Scenarios and Applications
13.2 Part One (Workers Comp) and Part Two (Employers Liability)
Key Takeaways Explain This Topic AI
The standard policy is the NCCI Workers Compensation and Employers Liability Insurance Policy, form WC 00 00 00.
Part One pays statutory workers compensation benefits with no dollar limit for states listed in Item 3.A.
Part Two (Employers Liability) covers tort suits outside the statute (third-party-over, consortium) and does carry limits.
Standard Part Two limits are commonly 100/500/100: by accident / by disease aggregate / by disease each employee.
The disease policy limit is an aggregate cap, while the by-accident limit applies per accident with no aggregate.
Last updated: June 2026
The WC 00 00 00 Policy
The standard policy is the Workers Compensation and Employers Liability Insurance Policy , form WC 00 00 00 C , drafted by the NCCI (National Council on Compensation Insurance) and used in most states. Unlike ISO commercial forms, the WC policy has no single overall limit for its statutory part. Memorize its structure — the exam tests the difference between Part One and Part Two relentlessly.
The policy contains:
- Part One — Workers Compensation Insurance
- Part Two — Employers Liability Insurance
- Part Three — Other States Insurance (covered in 13.4)
- Part Four — Your Duties If Injury Occurs
- Part Five — Premium
- Part Six — Conditions
The Information Page (the WC equivalent of a declarations page) lists the named insured, the states in Item 3.A, other states in Item 3.C, the Part Two limits, and the classification/payroll/rate data used to compute premium.
A second structural feature worth memorizing: the workers compensation law of each listed state is treated as part of the policy as if written into it. Because of this, if a state legislature raises a benefit during the term, the WC policy automatically pays the higher amount with no endorsement needed — a direct consequence of Part One having no fixed dollar limit. The insurer also cannot cancel mid-term in a way that leaves the statutory obligation unfunded without following the state's strict cancellation-notice rules, which often require notice to the state regulator as well as the insured.
Part One — Workers Compensation
Part One promises to pay promptly when due the benefits required of the insured by the workers compensation law of any state listed in Item 3.A of the Information Page. The single most-tested feature:
Part One has NO dollar limit. The insurer pays whatever the state statute requires — there is no policy maximum.
This is logical: because benefits are set by statute, the insurer simply funds the statutory obligation. Part One responds when the employer is legally obligated under the workers compensation statute , which is a no-fault obligation requiring no proof of negligence. Part One also includes the insurer's right and duty to defend and, importantly, the workers compensation law is deemed part of the policy — so a statutory benefit increase automatically applies.
Part Two — Employers Liability
Part Two fills gaps where an employee (or related party) sues the employer for a work-related injury outside the statutory benefit system. It functions like liability coverage and therefore does carry limits . Part Two responds to claims such as:
Third-party-over actions — an injured worker sues a product manufacturer, who then sues the employer.
Consequential bodily injury — injury to a spouse/relative consequent on the worker's injury.
Loss of consortium claims by a worker's family member.
Dual-capacity suits.
Standard Part Two Limits
The customary minimum limits are written as bodily injury by accident / by disease policy limit / by disease each employee , commonly:
- Limit type Amount
- Bodily Injury by Accident — each accident $100,000
- Bodily Injury by Disease — policy limit (aggregate) $500,000
- Bodily Injury by Disease — each employee $100,000
This classic set is read aloud as "100/500/100." The accident limit is per accident (no aggregate); the disease policy limit is an aggregate cap on all disease claims.
Worked Numeric — Part Two Disease Aggregate
A contractor carries Part Two limits of 100/500/100. Over the policy year, six employees develop the same occupational disease, and a third-party-over action assigns the employer $90,000 of employers-liability damages per employee.
Each-employee limit ($100,000) is satisfied: $90,000 each is paid.
But 6 x $90,000 = $540,000 , which exceeds the $500,000 disease policy aggregate .
The insurer pays only $500,000 total for all disease claims combined; the remaining $40,000 is uninsured.
Contrast: had these been six separate accidents , the $100,000 by-accident limit applies per accident with no aggregate, so each could be paid up to its own limit.
Part One vs. Part Two — The Core Distinction
- Feature Part One (WC) Part Two (EL)
- Basis Statutory, no-fault Tort liability of employer
- Dollar limit None Yes (e.g., 100/500/100)
- Triggered by State WC statute obligation Lawsuit outside the statute
- Typical claim Standard injured-worker benefits Third-party-over, consortium
How the Parts Work Together
Most workplace injuries are paid entirely under Part One — the worker files a claim, the insurer funds statutory benefits, and there is no lawsuit. Part Two only activates when someone pierces the exclusive-remedy wall.
The exam's favorite scenario is the third-party-over action : a worker injured by a defective machine collects Part One benefits, then sues the machine maker; the machine maker, claiming the employer was partly at fault for poor maintenance, sues the employer for contribution. The statute bars the worker from suing the employer directly, but it does not bar the third party — so Part Two responds to the employer's resulting liability, subject to its limits.
Remember that defense costs under both parts are generally paid in addition to the limits, and the insurer controls the defense. A worker cannot waive the employer's statutory duty, so settlements of Part One claims often require state workers compensation board approval before they are final.