Study guide
1.3 Electrical Workers Regulations and LEW Classes
EMA Electrician Licence Written Assessment Study Guide Singapore
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Assessment Overview, Electricity Act and Regulations
1.1 Assessment Structure, Eligibility, Fees, and Application Process 1.2 Legislative Framework and Electricity Act Overview (Part 9) 1.3 Electrical Workers Regulations and LEW Classes 1.4 Scope of Work and Responsibilities of a Licensed Electrician 1.5 Electrical Installations Regulations and Compliance Requirements 1.6 Notification, Connection, Modification, and Inspection Duties 1.7 Offences, Penalties, Disciplinary Actions, and Licence Renewal
2 Chapter 2: Domestic Electrical Installations (SS 638)
2.1 Domestic Wiring Systems, Cables, and Conduits 2.2 Consumer Units and Distribution Board (DB) Layouts 2.3 Final Circuits: Lighting, Radial, and Ring Final Socket Circuits 2.4 Mandatory 30 mA RCD/RCCB Protection and Isolation 2.5 Cable Colour Coding, Identification, and Accessories
3 Chapter 3: Industrial Electrical Installations (SS 638)
3.1 Industrial Low-Voltage (LV) Distribution and Sub-Switchboards 3.2 Motor Control Circuits, Starters, and Overload Protection 3.3 Industrial Wiring Systems: Trunking, Tray, Ladder, and Armoured Cables 3.4 Industrial Load Segregation, Phase Balancing, and Emergency Stopping 3.5 Industrial Switchgear, Circuit Breakers (MCB, MCCB), and Fuses 3.6 Motor Troubleshooting, Sequential Starting, and Programmable Logic Controllers (PLC)
4 Chapter 4: Electrical Principles — AC/DC Supplies, Three-Phase Power, and Power Quality
4.1 AC and DC Supply Fundamentals: Circuit Laws, RMS Values, and Singapore Voltage Levels 4.2 Three-Phase Relationships and Real, Apparent, and Reactive Power 4.3 Power Factor Correction, Harmonics, and Power Quality
5 Chapter 5: Protection Against Electric Shock and Earthing
5.1 Fundamentals of Electric Shock: Basic Protection and Fault Protection 5.2 Earthing Systems in Singapore: TN-S and TT Arrangements 5.3 Touch Voltage, Protective Conductor Sizing, and Main Earthing Terminals 5.4 Residual Current Devices (RCD/RCCB), Earth Fault Protection, and Equipotential Bonding
6 Chapter 6: Installation Design, Single-Line Diagrams (SLD), and Cable Sizing
6.1 Single-Line Diagram (SLD) Preparation, Symbols, and Standard Layouts 6.2 Maximum Demand Calculation and Diversity Factors for ≤45 kVA 6.3 Cable Selection, Current-Carrying Capacity, and Correction Factors 6.4 Voltage Drop Calculations and Circuit Segregation Rules
7 Chapter 7: Testing and Commissioning
7.1 Inspection and Testing Sequence Overview and Visual Inspection 7.2 Continuity Testing of Protective and Equipotential Conductors 7.3 Insulation Resistance Testing and Polarity Verification 7.4 Earth Fault Loop Impedance (Zs), RCD Testing, and Post-Turn-On Checks
8 Chapter 8: Temporary Electrical Installations (SS 650)
8.1 SS 650 Part 1: Construction Site Temporary Electrical Supply 8.2 SS 650 Part 2: Festive Lighting, Trade Fairs, and Exhibition Supplies 8.3 Temporary Generators, Statement of Approval (SOA), and Safety Inspections
1.3 Electrical Workers Regulations and LEW Classes
Key Takeaways Explain This Topic AI
The Electricity (Electrical Workers) Regulations establish three distinct statutory classes of Licensed Electrical Workers (LEWs): Electrician, Electrical Technician, and Electrical Engineer.
A Licensed Electrician is strictly restricted to low-voltage (≤1000 V AC) installations with an approved design and operating load limit of not exceeding 45 kVA.
A Licensed Electrical Technician is authorized to operate/switch LV installations up to 500 kVA and design/inspect LV installations up to 150 kVA.
A Licensed Electrical Engineer possesses unrestricted technical authority covering all voltage levels (LV, HV 22kV/66kV/230kV) and unlimited kVA capacities.
Candidates for a Licensed Electrician licence must satisfy one statutory qualification route (e.g. a relevant Nitec certificate plus at least 2 years of relevant Singapore practical experience, or 5 years' experience plus the EN032 preparatory course) and pass the EMA written test, practical test, and technical interview.
Last updated: August 2026
1.3 Electrical Workers Regulations and LEW Classes
Quick Summary: Under the Electricity (Electrical Workers) Regulations , Singapore enforces a strict three-tier licensing framework to ensure that electrical work is executed safely by competent personnel. The three classes of Licensed Electrical Workers (LEWs) are Electrician , Electrical Technician , and Electrical Engineer . A Licensed Electrician is limited strictly to Low Voltage ( ≤ 1000 V AC \le 1000\text{ V AC} ≤ 1000 V AC ) installations with an approved load limit of ≤ 45 kVA \le 45\text{ kVA} ≤ 45 kVA .
1. Statutory Basis of LEW Licensing under Singapore Law
The Electricity (Electrical Workers) Regulations were enacted under the statutory authority of Section 103 of the Electricity Act. The fundamental objective of these regulations is to eliminate substandard, unsafe, or unauthorized electrical installation, repair, and maintenance work.
Under Singapore law, carrying out electrical work without an appropriate licence issued by the EMA is a criminal offence. The regulations mandate that electrical work must be performed either personally by a Licensed Electrical Worker or under the direct, physical supervision of an LEW holding a licence class appropriate for the electrical parameters of the installation.
2. The Three Classes of Licensed Electrical Workers (LEWs)
To match technical competence with operational responsibility, the EMA categorizes Licensed Electrical Workers into three progressive statutory classes. Each class defines precise boundary limits regarding voltage level, design capacity, operational switching authority, and certification scope.
Comprehensive LEW Class Comparison Matrix
Technical Attribute Licensed Electrician Licensed Electrical Technician Licensed Electrical Engineer
Voltage Boundary Low Voltage only ( ≤ 1000 V AC \le 1000\text{ V AC} ≤ 1000 V AC / 1500 V DC 1500\text{ V DC} 1500 V DC ) Low Voltage only ( ≤ 1000 V AC \le 1000\text{ V AC} ≤ 1000 V AC ) Unrestricted (Low Voltage & High Voltage: 6.6kV, 22kV, 66kV, 230kV)
Approved Design Load Limit ≤ 45 kVA \le 45\text{ kVA} ≤ 45 kVA (Single-Phase or 3-Phase) ≤ 150 kVA \le 150\text{ kVA} ≤ 150 kVA (Low Voltage) Unrestricted (Unlimited kVA capacity)
Operating / Switching Limit ≤ 45 kVA \le 45\text{ kVA} ≤ 45 kVA (Low Voltage) ≤ 500 kVA \le 500\text{ kVA} ≤ 500 kVA (Low Voltage) Unrestricted (Unlimited kVA capacity)
Certificate of Compliance Scope Can issue CoC for ≤ 45 kVA \le 45\text{ kVA} ≤ 45 kVA LV installations Can issue CoC for ≤ 500 kVA \le 500\text{ kVA} ≤ 500 kVA LV installations Can issue CoC for all LV & HV installations
Electrical Installation Licence Cannot act as Appointed LEW for licensed premises ( > 45 kVA >45\text{ kVA} > 45 kVA ) Appointed LEW for LV premises up to 500 kVA 500\text{ kVA} 500 kVA Appointed LEW for all High Voltage and LV premises
Primary Work Domain Residential HDB/landed, small shops, light commercial wiring Medium commercial buildings, factories, sub-switchboards Heavy industrial plants, high-voltage substations, power plants
3. Scope and Technical Boundaries: Licensed Electrician ( ≤ 1000 V \le 1000\text{ V} ≤ 1000 V / ≤ 45 kVA \le 45\text{ kVA} ≤ 45 kVA )
A Licensed Electrician forms the fundamental tier of Singapore's electrical licensing system. Candidates must thoroughly master the exact mathematical and physical boundaries defining this licence class.
Voltage Limits
Low Voltage Definition: Under SS 638 and EMA regulations, Low Voltage is defined as an alternating current (AC) voltage exceeding 50 V AC 50\text{ V AC} 50 V AC root-mean-square (rms) but not exceeding 1000 V AC 1000\text{ V AC} 1000 V AC between conductors (or 600 V AC 600\text{ V AC} 600 V AC between conductor and earth), or a direct current (DC) voltage exceeding 120 V DC 120\text{ V DC} 120 V DC ripple-free but not exceeding 1500 V DC 1500\text{ V DC} 1500 V DC .
Licensed Electrician Boundary: Authorized to work on standard Singapore LV supplies: 230 V 230\text{ V} 230 V single-phase 2-wire AC and 400 V 400\text{ V} 400 V 3-phase 4-wire AC. Work on High Voltage systems ( 6.6 kV 6.6\text{ kV} 6.6 kV , 22 kV 22\text{ kV} 22 kV , or above) is strictly illegal for a Licensed Electrician.
Approved Load Limit Calculation (45 kVA Ceiling)
The statutory load limit for a Licensed Electrician is 45 kVA 45\text{ kVA} 45 kVA approved load. To understand what this limit means in practical current ratings:
For a 3-Phase 400 V Supply ( 45 kVA 45\text{ kVA} 45 kVA ): Apparent Power S = 3 × V line × I line \text{Apparent Power } S = \sqrt{3} \times V_{\text{line}} \times I_{\text{line}} Apparent Power S = 3 × V line × I line 45 , 000 VA = 1.73205 × 400 V × I line 45,000\text{ VA} = 1.73205 \times 400\text{ V} \times I_{\text{line}} 45 , 000 VA = 1.73205 × 400 V × I line I line = 45 , 000 692.82 ≈ 64.95 Amperes per phase I_{\text{line}} = \frac{45,000}{692.82} \approx 64.95\text{ Amperes per phase} I line = 692.82 45 , 000 ≈ 64.95 Amperes per phase
Practical Rule: In commercial practice, a 45 kVA 45\text{ kVA} 45 kVA 3-phase supply corresponds to a standard 63 A 63\text{ A} 63 A 3-phase main circuit breaker or isolator .
For a Single-Phase 230 V Supply ( 45 kVA 45\text{ kVA} 45 kVA ): S = V single × I single S = V_{\text{single}} \times I_{\text{single}} S = V single × I single 45 , 000 VA = 230 V × I single 45,000\text{ VA} = 230\text{ V} \times I_{\text{single}} 45 , 000 VA = 230 V × I single I single = 45 , 000 230 ≈ 195.65 Amperes I_{\text{single}} = \frac{45,000}{230} \approx 195.65\text{ Amperes} I single = 230 45 , 000 ≈ 195.65 Amperes
Practical Rule: Single-phase domestic supplies in Singapore are typically capped at 30 A 30\text{ A} 30 A or 63 A 63\text{ A} 63 A ( 6.9 kVA 6.9\text{ kVA} 6.9 kVA or 14.5 kVA 14.5\text{ kVA} 14.5 kVA ), well within the 45 kVA 45\text{ kVA} 45 kVA ceiling. +-------------------------------------------------------------------------+
- | LICENSED ELECTRICIAN SCOPE BOUNDARY |
- +-------------------------------------------------------------------------+
- | MAX VOLTAGE : 1000V AC (Standard 230V Single-Phase / 400V 3-Phase) |
- | MAX LOAD : 45 kVA Approved Load (~63A 3-Phase Main Switch Rating) |
- +-------------------------------------------------------------------------+
- |
- +--------------------------------+--------------------------------+
- | |
- v v
- [ PERMITTED WORK ] [ STRICTLY PROHIBITED ]
- Design & wire LV circuits <= 45 kVA - High Voltage work (> 1000V AC)
- Install DBs, switchgear <= 45 kVA - Design or turn-on > 45 kVA
- Conduct inspection & testing SS 638 - Issue CoC for premises > 45 kVA
- Issue Certificate of Compliance <= 45 kVA - Act as Appointed LEW for
- Maintain & repair LV installations Licensed Premises (> 45 kVA)
- 4. Eligibility, Qualifications, and Examination Process
To be eligible for a Licensed Electrician licence, an applicant must satisfy rigid educational and practical experience prerequisites established by the EMA:
Educational Prerequisites (Route (a))
Applicants relying on the qualification route must possess one of the following technical qualifications recognized by the Authority:
National ITE Certificate ( Nitec ) in Electrical Technology, Electrical Power & Control, or Building Services.
Higher National ITE Certificate ( Higher Nitec ) in Electrical Engineering.
Diploma in Electrical Engineering awarded by a recognized Singapore Polytechnic (Ngee Ann, Singapore Poly, Nanyang Poly, Republic Poly, Temasek Poly).
Equivalent technical qualifications acceptable to the EMA Inspectorate.
Statutory Qualification Routes (Regulation 4, Electrical Workers Regulations)
An electrician’s licence may be issued to a person who satisfies one of four statutory routes:
Route (a) — NITEC + 2 years: a NITEC certificate whose curriculum is relevant to the electrical work an electrician is authorised to perform (or another qualification acceptable to the Authority), plus not less than 2 years of relevant practical experience in Singapore.
Route (aa) — 10 years’ experience: not less than 10 years of relevant practical experience in Singapore (no academic qualification required).
Route (ab) — 5 years + approved course: not less than 5 years of relevant practical experience in Singapore and successful completion of a course of instruction specified on the approved courses webpage — currently the EN032 Licensed Electrician Preparatory Course conducted by the Singapore Institute of Power and Gas (SIPG) .
Route (b) — legacy PUB registration: had been registered as an electrical contractor by the Public Utilities Board before 1 January 1975 .
Practical experience must be relevant to the electrical work an electrician is authorised to perform; employer or project-LEW testimonials must accompany the ELISE application.
Three-Stage Competency Assessment Process
Stage 1: Written Test: A 3-hour written paper (Sections A–E: 60 MCQs plus domestic and industrial long questions, 240 marks; overall pass mark 50% with at least 75% in Section E on Regulations) testing the Electricity Act, Electrical Workers Regulations, Electrical Installations Regulations, SS 638, and SS 650. The written pass is valid for 3 years.
Stage 2: Practical Test: Hands-on troubleshooting on a wired installation mock-up (not exceeding 45 kVA) containing deliberate faults — open circuit, short circuit, wrong polarity or phasing, and colour-code errors.
Stage 3: Technical Competency Assessment Interview: A panel interview covering single-line diagrams, protection against electric shock and overcurrent, earthing and bonding, testing and commissioning, and temporary installations.
5. Licence Card Format and Public e-Register
Upon successfully passing the EMA assessments and paying the prescribed fee, the Authority issues an official LEW Licence Card. +-------------------------------------------------------------------------+
- | ENERGY MARKET AUTHORITY (SINGAPORE) |
- | LICENSED ELECTRICAL WORKER CARD |
- | |
- | [ PHOTO ] NAME : TAN AH KOW |
- | LICENCE NO : 7/012345 |
- | CLASS : ELECTRICIAN |
- | VALID TILL : 09 AUG 2027 |
- | |
- | RESTRICTION: Low Voltage (<=1000V AC), Approved Load <= 45 kVA |
- +-------------------------------------------------------------------------+
Licence Registration Number Prefix: Licensed Electrician licences carry a registration number prefix (e.g., 7/xxxxxx ), whereas Technicians carry prefix 8/xxxxxx and Engineers carry prefix 9/xxxxxx or PE registration numbers.
Mandatory Identification Rule: A Licensed Electrician must carry their physical or digital LEW card while conducting electrical work and present it immediately upon request by an EMA inspector, SP PowerGrid officer, or customer.
EMA e-Register Portal: The EMA maintains an online public directory where consumers can verify the licensing status, class restrictions, and validity period of any LEW in Singapore.