Study guide
3.5 Industrial Switchgear, Circuit Breakers (MCB, MCCB), and Fuses
EMA Electrician Licence Written Assessment Study Guide Singapore
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Assessment Overview, Electricity Act and Regulations
1.1 Assessment Structure, Eligibility, Fees, and Application Process 1.2 Legislative Framework and Electricity Act Overview (Part 9) 1.3 Electrical Workers Regulations and LEW Classes 1.4 Scope of Work and Responsibilities of a Licensed Electrician 1.5 Electrical Installations Regulations and Compliance Requirements 1.6 Notification, Connection, Modification, and Inspection Duties 1.7 Offences, Penalties, Disciplinary Actions, and Licence Renewal
2 Chapter 2: Domestic Electrical Installations (SS 638)
2.1 Domestic Wiring Systems, Cables, and Conduits 2.2 Consumer Units and Distribution Board (DB) Layouts 2.3 Final Circuits: Lighting, Radial, and Ring Final Socket Circuits 2.4 Mandatory 30 mA RCD/RCCB Protection and Isolation 2.5 Cable Colour Coding, Identification, and Accessories
3 Chapter 3: Industrial Electrical Installations (SS 638)
3.1 Industrial Low-Voltage (LV) Distribution and Sub-Switchboards 3.2 Motor Control Circuits, Starters, and Overload Protection 3.3 Industrial Wiring Systems: Trunking, Tray, Ladder, and Armoured Cables 3.4 Industrial Load Segregation, Phase Balancing, and Emergency Stopping 3.5 Industrial Switchgear, Circuit Breakers (MCB, MCCB), and Fuses 3.6 Motor Troubleshooting, Sequential Starting, and Programmable Logic Controllers (PLC)
4 Chapter 4: Electrical Principles — AC/DC Supplies, Three-Phase Power, and Power Quality
4.1 AC and DC Supply Fundamentals: Circuit Laws, RMS Values, and Singapore Voltage Levels 4.2 Three-Phase Relationships and Real, Apparent, and Reactive Power 4.3 Power Factor Correction, Harmonics, and Power Quality
5 Chapter 5: Protection Against Electric Shock and Earthing
5.1 Fundamentals of Electric Shock: Basic Protection and Fault Protection 5.2 Earthing Systems in Singapore: TN-S and TT Arrangements 5.3 Touch Voltage, Protective Conductor Sizing, and Main Earthing Terminals 5.4 Residual Current Devices (RCD/RCCB), Earth Fault Protection, and Equipotential Bonding
6 Chapter 6: Installation Design, Single-Line Diagrams (SLD), and Cable Sizing
6.1 Single-Line Diagram (SLD) Preparation, Symbols, and Standard Layouts 6.2 Maximum Demand Calculation and Diversity Factors for ≤45 kVA 6.3 Cable Selection, Current-Carrying Capacity, and Correction Factors 6.4 Voltage Drop Calculations and Circuit Segregation Rules
7 Chapter 7: Testing and Commissioning
7.1 Inspection and Testing Sequence Overview and Visual Inspection 7.2 Continuity Testing of Protective and Equipotential Conductors 7.3 Insulation Resistance Testing and Polarity Verification 7.4 Earth Fault Loop Impedance (Zs), RCD Testing, and Post-Turn-On Checks
8 Chapter 8: Temporary Electrical Installations (SS 650)
8.1 SS 650 Part 1: Construction Site Temporary Electrical Supply 8.2 SS 650 Part 2: Festive Lighting, Trade Fairs, and Exhibition Supplies 8.3 Temporary Generators, Statement of Approval (SOA), and Safety Inspections
3.5 Industrial Switchgear, Circuit Breakers (MCB, MCCB), and Fuses
Key Takeaways Explain This Topic AI
Miniature Circuit Breakers (MCBs) are categorized into Type B (3-5x In), Type C (5-10x In), and Type D (10-20x In) trip characteristics based on load inrush profiles.
Moulded Case Circuit Breakers (MCCBs) provide higher current ratings and adjustable thermal-magnetic or electronic trip units with defined Ultimate (Icu) and Service (Ics) short-circuit breaking capacities.
High Rupturing Capacity (HRC) fuses (BS 88 / IEC 60269) deliver extremely fast (<5 ms) fault clearance and prospective breaking capacities exceeding 80 kA.
Selectivity (discrimination) requires series protective devices to coordinate so that only the device immediately upstream of a fault trips, leaving main feeders energized.
The prospective fault current (PFC) at any point in an industrial installation must never exceed the short-circuit breaking capacity (Icu / Icn) of the installed switchgear.
Last updated: August 2026
3.5 Industrial Switchgear, Circuit Breakers (MCB, MCCB), and Fuses
Protective switchgear isolates electrical faults—overloads and short circuits—before conductor insulation melts, fires ignite, or equipment suffers irreparable damage. In Singapore industrial installations governed by SS 638 and IEC standards, protective devices must be meticulously selected based on load current ( I n I_n I n ), instantaneous tripping characteristic, breaking capacity ( I c u / I c s I_{cu} / I_{cs} I c u / I cs ), and selectivity (discrimination).
1. Miniature Circuit Breakers (MCB - SS 245 / IEC 60898 / IEC 60947-2)
Miniature Circuit Breakers combine dual tripping mechanisms within a compact molded housing:
Thermal Element (Inverse-Time Overload Protection): Bimetallic strip that bends under sustained low-level overcurrents.
Magnetic Element (Instantaneous Short-Circuit Protection): Solenoid coil that fires an armature to trip the breaker instantly (<10 ms) when current exceeds a predetermined threshold.
Instantaneous Tripping Characteristics (Type B, C, D)
IEC 60898 classifies MCBs into standard tripping curves based on the multiple of rated current ( I n I_n I n ) required to trigger instantaneous magnetic tripping:
MCB Tripping Type Instantaneous Magnetic Trip Range Typical Industrial & Commercial Applications
Type B 3 × I n to 5 × I n 3 \times I_n \text{ to } 5 \times I_n 3 × I n to 5 × I n Domestic lighting, office socket outlets, resistive electric heating elements.
Type C 5 × I n to 10 × I n 5 \times I_n \text{ to } 10 \times I_n 5 × I n to 10 × I n General industrial lighting (fluorescent, LED drivers), small 3-phase motors, general machinery circuits. Standard choice for industrial distribution.
Type D 10 × I n to 20 × I n 10 \times I_n \text{ to } 20 \times I_n 10 × I n to 20 × I n High inductive inrush loads: large induction motors, transformers, arc welders, X-ray equipment. Prevents nuisance tripping during starting.
Example: A 16A Type C MCB trips magnetically between 80 A 80\text{ A} 80 A and 160 A 160\text{ A} 160 A . A 16A Type D MCB trips magnetically between 160 A 160\text{ A} 160 A and 320 A 320\text{ A} 320 A .
2. Moulded Case Circuit Breakers (MCCB - IEC 60947-2)
Moulded Case Circuit Breakers are used for higher current ratings (typically 16A up to 1600A; up to 100A for LEW Electrician licence scope) and higher fault interrupting duties in sub-distribution boards.
Adjustable Trip Settings
Unlike fixed-rating MCBs, industrial MCCBs feature adjustable trip units:
Thermal Overload Current ( I r I_r I r ): Adjustable between 0.7 to 1.0 × I n 0.7 \text{ to } 1.0 \times I_n 0.7 to 1.0 × I n to match exact cable current-carrying capacity.
Short-Time / Magnetic Pickup ( I m I_m I m ): Adjustable between 5 to 10 × I r 5 \text{ to } 10 \times I_r 5 to 10 × I r to coordinate with downstream devices.
Electronic / Microprocessor Trip Units (LSI): Provide precise independent adjustments for Long-time delay (overload), Short-time delay (selective short circuit), and Instantaneous trip (catastrophic fault).
Short-Circuit Breaking Capacity Parameters
Rated Ultimate Short-Circuit Breaking Capacity ( I c u I_{cu} I c u ): The maximum short-circuit fault current (in kA) that the MCCB can successfully clear at rated voltage. Following an I c u I_{cu} I c u fault test sequence (Open - 3 min - Close/Open), the breaker is considered unsafe for continued service.
Rated Service Short-Circuit Breaking Capacity ( I c s I_{cs} I cs ): The short-circuit current that the MCCB can clear repeatedly without suffering performance degradation or loss of capability. I c s I_{cs} I cs is expressed as a percentage of I c u I_{cu} I c u (typically 50%, 75%, or 100%). In critical industrial plants, MCCBs should be specified with I c s = 100 % I c u I_{cs} = 100\% I_{cu} I cs = 100% I c u .
3. High Rupturing Capacity (HRC) Fuses (BS 88 / IEC 60269)
HRC fuses remain widely specified in industrial switchgear due to their extremely high prospective breaking capacity and ultra-fast current-limiting performance.
Construction & Arc Quenching
An HRC fuse consists of a high-grade ceramic barrel enclosing a pure silver fuse element with calibrated neck reductions. The barrel is tightly packed with high-purity silica quartz sand. Under short-circuit conditions, the silver element vaporizes in less than 2 to 5 milliseconds . The surrounding quartz sand fuses with the silver vapor to form a non-conducting glass fulgurite, rapidly quenching the arc.
Fuse Classifications
Class gG: Full-range breaking capacity fuse for general application (protects both overloads and short circuits in cables and distribution feeders).
Class gM: Dual-rated motor circuit protection fuse (e.g., 63M100 ). The first digit (63A) denotes continuous current rating for thermal sizing; the second digit (100A) denotes the motor starting withstand characteristic.
4. Discrimination and Selectivity (Series Device Co-ordination)
Selectivity (discrimination) is the coordination of series-connected protective devices such that a fault occurring on a final sub-circuit causes only the protective device immediately upstream of the fault to operate , while main upstream switchboard breakers remain closed.
Rules for Achieving Selectivity under SS 638
Fuse-to-Fuse Discrimination: Upstream HRC fuse rating must be at least 1.6 × 1.6 \times 1.6 × the downstream fuse rating (e.g., 100A upstream to 63A downstream).
Fuse-to-MCB Discrimination: Upstream HRC fuse rating should be at least 2.0 × 2.0 \times 2.0 × the downstream MCB rating to ensure the MCB operates magnetically before the fuse begins to melt.
MCCB-to-MCCB Discrimination: Achieved by setting a short-time delay ( t s d = 100 − 300 ms t_{sd} = 100 - 300\text{ ms} t s d = 100 − 300 ms ) on the upstream Category B MCCB, allowing the downstream Category A MCCB to clear the fault instantaneously without tripping the main feeder.
5. Prospective Fault Current (PFC) & Safety Verification
Prospective Fault Current ( I p f I_{pf} I p f ) is the maximum prospective short-circuit current that can flow at a specific point in an electrical installation during a solid zero-impedance line-to-line or line-to-earth fault.
Mandatory SS 638 Safety Rule
The Rated Short-Circuit Breaking Capacity ( I c u I_{cu} I c u or I c n I_{cn} I c n ) of EVERY protective device installed in a switchboard MUST BE EQUAL TO OR GREATER THAN the Prospective Fault Current ( I p f I_{pf} I p f ) at its point of installation. I c u ≥ I p f I_{cu} \ge I_{pf} I c u ≥ I p f
If a sub-distribution board installed near a transformer room experiences a prospective fault current of 15 kA 15\text{ kA} 15 kA , installing standard 6 kA MCBs is a catastrophic safety hazard . Under fault conditions, an undersized breaker will fail violently, creating an explosive arc flash, destroying switchgear, and risking fatal injury to personnel.