Study guide

11.3 Injury/Illness Rates (TRIR, DART, LTIR Formulas) & OSHA 300/300A/301 Recordkeeping Rules

BCSP Safety Management Professional SMP / SMS

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Management Systems Frameworks & Leadership

1.1 Occupational Safety and Health Management System (OSHMS) Frameworks 1.2 Leadership Commitment, Safety Policy & Meaningful Worker Participation 1.3 OSHMS Planning, Implementation, and Resource Allocation

2 Chapter 2: Operational Management of Change & Training

2.1 Management of Change (MOC) Architecture: Operational, Organizational, and Physical Changes 2.2 Competency Assessment, Needs Analysis & Adult Learning in Safety Training 2.3 Documentation, Document Control, and Retention Systems 2.4 Assessing Hazards of New Products, Chemicals & Equipment Before Introduction

3 Chapter 3: Contractor Safety & Performance Evaluation

3.1 Contractor Safety Pre-Qualification, Oversight & Multi-Employer Worksite Rules 3.2 Internal SH&E Audits, Compliance Reviews & Program Assessments 3.3 Goal Setting, Leading vs. Lagging Indicators & Balanced Scorecards 3.4 Corrective Action Tracking, Root Verification & Continuous Improvement (PDCA)

4 Chapter 4: Hazard Identification & Risk Assessment

4.1 Risk Management Principles, Terminology & ISO 31000 Framework 4.2 Hazard Identification Methodologies: JHA, JSA, and Workplace Walkthroughs 4.3 Qualitative and Semi-Quantitative Risk Assessment Methodologies

5 Chapter 5: Hierarchy of Controls & Prevention Through Design

5.1 The Hierarchy of Controls: Engineering, Administrative, and PPE Selection Criteria 5.2 Prevention through Design (PtD) Principles, Life-Cycle Safety & Design Reviews 5.3 Work Planning, Pre-Task Analysis & Permit-to-Work Systems

6 Chapter 6: Regulatory Exposures, Insurance & Ergonomics

6.1 Regulatory Compliance, OSHA General Duty Clause 5(a)(1) & Liability Exposures 6.2 Risk Financing, Insurance Policies & Workers' Compensation Management 6.3 Experience Modification Rate (EMR) Dynamics and Financial Impact 6.4 Ergonomic Risk Assessment (REBA/RULA/NIOSH Lifting Equation) & MSD Controls

7 Chapter 7: Chemical Hazards, Toxicology, GHS & Regulated Substances

7.1 Occupational Toxicology: Dose-Response, Routes of Entry & Exposure Limits 7.2 Globally Harmonized System (GHS), SDS 16-Section Structure & Chemical Labeling 7.3 Airborne Contaminants, Exposure Monitoring & Local Exhaust Ventilation (LEV) 7.4 Lead: Exposure Limits, Medical Surveillance & Medical Removal Protection 7.5 Asbestos: Exposure Limits, Work Classifications & Control Requirements

8 Chapter 8: Mechanical, Electrical & Kinetic Safety

8.1 Walking-Working Surfaces, Fall Protection Systems & Fall Arrest Calculations 8.2 Machine Guarding Principles, Point of Operation & Mechanical Hazard Controls 8.3 Control of Hazardous Energy (Lockout/Tagout - 29 CFR 1910.147) & Alternative Protection 8.4 Electrical Safety, Arc Flash Assessment & NFPA 70E Safe Work Practices

9 Chapter 9: Confined Spaces, Fire, Environmental & Biological Health Hazards

9.1 Permit-Required Confined Space (PRCS) Entry, Atmospheric Testing & Rescue Planning 9.2 Fire Protection Systems, Life Safety (NFPA 101) & Flammable/Combustible Liquids (NFPA 30) 9.3 Noise Measurement, Hearing Conservation Programs & Noise Reduction Rating (NRR) 9.4 Environmental Health: Heat/Cold Stress, Radiation Safety & Environmental Baseline 9.5 Bloodborne Pathogens & Infectious Materials Exposure Control 9.6 Mold, Allergens & Indoor Air Quality Investigations

10 Chapter 10: Incident Response, Scene Control & Witness Interviewing

10.1 Immediate Incident Response, Notification Triggers & Medical Triage 10.2 Scene Preservation, Physical Evidence Collection & Photographic Documentation 10.3 Cognitive Witness Interviewing, Psychological Safety & Factual Statement Gathering

11 Chapter 11: Causal Analysis, Investigation Reporting & OSHA Recordkeeping

11.1 Causal Analysis Methodologies: 5-Whys, Fishbone, Barrier Analysis & Fault Tree Analysis 11.2 Developing Actionable Recommendations, Investigation Reporting & Action Tracking 11.3 Injury/Illness Rates (TRIR, DART, LTIR Formulas) & OSHA 300/300A/301 Recordkeeping Rules

12 Chapter 12: Emergency Preparedness, Vulnerability Assessment & ICS

12.1 Emergency Action Plans (EAPs), Hazard Vulnerability Assessment & Credible Scenarios 12.2 Incident Command System (ICS) Structure, Unified Command & Emergency Roles 12.3 Emergency Preparedness Exercises, Drills & Plan Gap Analysis

13 Chapter 13: BCSP Ethics & Safety Leadership

13.1 The BCSP Code of Ethics: Professional Conduct, Conflict of Interest & Integrity Scenarios 13.2 Safety Leadership Styles: Transformational vs. Transactional & Felt Leadership 13.3 Worker Engagement, Psychological Safety & Just Culture Frameworks

14 Chapter 14: Financial Justification, Cost Analysis & Safety Economics

14.1 Direct vs. Indirect Costs of Incidents (Heinrich's Iceberg Model & Hidden Losses) 14.2 Financial Justification: Cost-Benefit Analysis (CBA), Net Present Value (NPV) & Safety Capital Budgeting 14.3 Safety Performance Metrics in Business Terms: Enterprise Risk Alignment & TCOR

15 Chapter 15: Measuring Safety Culture, Executive Communication & Change Management

15.1 Assessing and Measuring Safety Culture (Hudson Maturity Ladder & Climate Surveys) 15.2 Executive Communication, C-Suite Engagement & Board Presentations 15.3 Conflict Resolution, Stakeholder Negotiation & Managing Resistance to Safety Change

16 Chapter 16: Occupational Health, Physical Agents & Worker Well-Being

16.1 Occupational Health Programs & Medical Surveillance Requirements 16.2 Hand-Arm and Whole-Body Vibration: Exposure Assessment & Control 16.3 Workplace Stressors, Psychosocial Risk & Worker Mental Health 16.4 Reporting Requirements for Exposures & High-Risk Conditions 16.5 Respiratory Protection & PPE Program Management

17 Chapter 17: Safety Communication, Directives & Written Programs

17.1 Facilitating and Leading Effective Safety Meetings 17.2 Communicating Hazards and Controls to the Workforce 17.3 Writing Safety Directives, Objectives & Written Programs

11.3 Injury/Illness Rates (TRIR, DART, LTIR Formulas) & OSHA 300/300A/301 Recordkeeping Rules

Key Takeaways Explain This Topic AI

OSHA 29 CFR Part 1904 mandates the standard 200,000 employee-hour multiplier for rate calculations, representing the base equivalent of 100 full-time employees working 40 hours per week for 50 weeks per calendar year.

Under 29 CFR 1904.5, an injury or illness occurring within the employer's establishment is subject to the 'geographic presumption' of work-relatedness unless it falls strictly within one of the nine explicit regulatory exemptions under 1904.5(b)(2).

29 CFR 1904.7(b)(5)(ii) establishes an exhaustive, finite list of 14 first aid treatments; any medical intervention outside this explicit list—including prescription medications at prescription strength or rigid splinting—constitutes recordable medical treatment regardless of who administers it.

Day counts for Days Away, Restricted, or Transferred (DART) are calculated based on cumulative calendar days (including weekends, scheduled holidays, and vacation days) beginning the day after the incident, subject to a statutory cap of 180 calendar days per case.

OSHA Form 300A annual summaries must be certified under formal signature by an authorized company executive (Owner, Corporate Officer, Highest-Ranking Site Official, or Immediate Supervisor of Site Official), posted conspicuously from February 1 through April 30, and retained alongside Forms 300 and 301 for a mandatory five-year retention period.

Last updated: September 2026

11.3 Injury/Illness Rates (TRIR, DART, LTIR Formulas) & OSHA 300/300A/301 Recordkeeping Rules

Under federal law (the Occupational Safety and Health Act of 1970) and 29 CFR Part 1904 , covered employers must maintain standardized records of occupational injuries and illnesses. Accurate OSHA recordkeeping is not merely an administrative regulatory compliance duty; it provides the statistical bedrock for enterprise risk benchmarking, worker safety evaluations, workers' compensation loss control, and public policy formulation by the Bureau of Labor Statistics (BLS).

For the Safety Management Professional (SMS/SMP), mastering Part 1904 is a core technical competency. Misclassifying an injury—whether by under-recording (exposing the enterprise to willful regulatory citations and mandatory penalties) or over-recording (artificially inflating incident rates, damaging commercial bid qualifications, and triggering targeted OSHA programmed inspections)—demonstrates a failure of professional safety governance.

The OSHA Recordkeeping Decision Framework

Determining whether an incident must be entered onto the OSHA Form 300 log requires moving through a rigid, sequential four-step legal analysis: ┌─────────────────────────────────────────────────────────────┐

  • │ STEP 1: Did an injury or illness occur? (1904.4) │
  • │ (An abnormal condition or disorder) │
  • └──────────────────────────────┬──────────────────────────────┘
  • │ YES
  • ▼
  • ┌─────────────────────────────────────────────────────────────┐
  • │ STEP 2: Is the injury or illness work-related? (1904.5) │
  • │ (Geographic presumption vs. 9 specific exceptions) │
  • └──────────────────────────────┬──────────────────────────────┘
  • │ YES
  • ▼
  • ┌─────────────────────────────────────────────────────────────┐
  • │ STEP 3: Is it a new case? (1904.6) │
  • │ (Not an uninterrupted recurrence of prior event) │
  • └──────────────────────────────┬──────────────────────────────┘
  • │ YES
  • ▼
  • ┌─────────────────────────────────────────────────────────────┐
  • │ STEP 4: Does it meet the General Recording Criteria (1904.7)│
  • │ or Specific Case Criteria (1904.8 - 1904.11)? │
  • │ • Death • Restricted Work / Job Transfer│
  • │ • Days Away from Work • Medical Treatment Beyond First│
  • │ • Loss of Consciousness Aid │
  • │ • Significant Diagnosis by Licensed Health Care Professional│
  • └──────────────────────────────┬──────────────────────────────┘
  • │ YES
  • ▼
  • RECORD ON OSHA FORM 300 & 301
  • Work-Relatedness Determination (29 CFR 1904.5)
  • The Geographic Presumption

Under 29 CFR 1904.5(a), an injury or illness is presumed to be work-related if it results from an event or exposure occurring in the work environment . The "work environment" encompasses the physical establishment where employees are working, the equipment or materials used in operations, and any physical location where employees are present as a condition of their employment.

The Nine Explicit Statutory Exceptions (29 CFR 1904.5(b)(2))

An injury occurring on the employer's premises is NOT work-related if it falls strictly within one of these nine specific exceptions:

General Public: The employee was present at the establishment as a member of the general public rather than as an employee (e.g., an off-duty retail employee shopping at their store on their day off).

Non-Work Symptoms Surfacing at Work: Symptoms that surface at work result solely from a non-work-related condition (e.g., an employee experiences an epileptic seizure or diabetic coma while sitting at their desk, unrelated to workplace physical hazards).

Voluntary Wellness / Recreational Activities: The injury results solely from voluntary participation in a wellness program, medical screening, fitness class, blood donation drive, or recreational sports league.

Food or Beverage for Personal Consumption: The injury results solely from the employee eating, drinking, or preparing food or beverages for personal consumption (whether brought from home or purchased in the company cafeteria). Critical Distinction: If the food was contaminated by workplace toxins (e.g., lead dust or chemical residue on cafeteria tables), or if food poisoning resulted from company-provided catering at a mandatory business function, it IS work-related.

Personal Tasks / Grooming Outside Assigned Hours: The injury results solely from the employee doing personal tasks (unrelated to their job duties) outside their assigned working hours.

Personal Grooming / Self-Medication / Self-Inflicted: The injury results solely from personal grooming, self-medication for a non-work condition (e.g., allergic reaction to personal medication), or intentional self-inflicted harm.

Motor Vehicle Accidents on Commute in Company Parking Lot: The injury results from a motor vehicle accident occurring on a company parking lot or company access road while the employee is actively commuting to or from work. Critical Distinction: Slipping on ice while walking across the company parking lot toward the plant entrance IS work-related under the geographic presumption!

Common Cold or Flu: The illness is the common cold or seasonal influenza.

Mental Illness: Mental illnesses (such as depression, anxiety, or PTSD) are not recordable unless the employee voluntarily provides a written medical opinion from a Physician or Other Licensed Health Care Professional (PLHCP) stating that the illness is job-related.

Telework / Work-at-Home Recordkeeping Rules

Injuries occurring while an employee is working from home are work-related only if the injury occurs while the employee is performing work for pay in the home office and the injury is directly related to the performance of work rather than general home environment hazards.

Recordable: An employee drops a box of company documents on their foot, or suffers carpal tunnel syndrome from intensive typing at their home desk.

Not Work-Related: An employee trips over their pet dog while walking to the kitchen for water, burns their hand on their home stove while cooking lunch, or falls down the basement stairs while doing laundry.

General Recording Criteria (29 CFR 1904.7)

An injury or illness meeting work-relatedness must be recorded on the OSHA Form 300 log if it results in one or more of the following operational outcomes:

Death: Must be recorded and reported to OSHA within 8 hours .

Days Away from Work: One or more calendar days the employee was physically unable to work.

Restricted Work or Job Transfer: An employee is kept from performing one or more routine functions of their job (duties regularly performed at least once per week) or from working the full workday that they would otherwise have been scheduled to work.

Medical Treatment Beyond First Aid: Any medical intervention not appearing on the explicit first aid list.

Loss of Consciousness: Any loss of consciousness, regardless of duration (even a few seconds).

Significant Injury or Illness Diagnosed by a PLHCP: Specific conditions that must be recorded even if they do not result in days away, restricted work, or medical treatment beyond first aid: cancer, chronic irreversible diseases (e.g., silicosis, beryllium disease), fractured or cracked bones, and punctured eardrums.

The Exhaustive First Aid List (29 CFR 1904.7(b)(5)(ii))

OSHA's regulatory definition of First Aid is strictly, explicitly exhaustive . It contains exactly 14 defined treatments. If a treatment does not appear on this list, it is legally classified as Medical Treatment Beyond First Aid , regardless of whether it is administered by a registered nurse, an emergency room physician, or a frontline supervisor:

# First Aid Treatment under 1904.7(b)(5)(ii) Contrasting Medical Treatment (Recordable)

1 Using non-prescription medications at non-prescription strength Physician prescribes prescription-strength drugs, or directs employee to take OTC drugs at prescription dosage (e.g., Ibuprofen > 400 mg per dose or > 1200 mg/day)

2 Administering tetanus immunizations Administering Hepatitis B vaccine post-exposure, rabies prophylaxis, or therapeutic antitoxins

3 Cleaning, flushing, or soaking wounds on the skin surface Debridement of deep tissue involving surgical tools

4 Using wound coverings: bandages, Band-Aids, gauze, butterfly bandages, or Steri-Strips Surgical sutures, staples, or chemical wound adhesives (e.g., Dermabond)

5 Using hot or cold therapy Physical therapy or chiropractic treatment programs

6 Using non-rigid supports (elastic bandages, wraps, non-rigid back belts) Devices with rigid stays, splints, casts, or orthopedic walking boots that immobilize bones or joints

7 Using temporary immobilization devices while transporting an accident victim Applying a splint or brace for ongoing therapeutic support and stability

8 Drilling of a fingernail or toenail to relieve subungual pressure; draining fluid from a blister Surgical removal of the nail bed or tissue excision

9 Using eye patches Removal of foreign material embedded in the cornea or sclera requiring surgical instruments

10 Removing foreign bodies from the eye using only irrigation or a cotton swab Using a needle, magnet, or scalpel to dislodge foreign bodies from the eye

11 Removing splinters/materials from skin via irrigation, tweezers, or cotton swabs Surgical excision or incision of skin tissue to extract deeply embedded objects

  • 12 Using finger guards Custom rigid orthopedic orthotics
  • 13 Using massages Physical therapy, deep-tissue therapy, or manual therapy prescribed by a licensed provider

14 Drinking fluids for relief of heat stress Intravenous (IV) fluid hydration therapy for heat exhaustion or dehydration

Counting Days Away and Restricted Work

Safety professionals frequently make catastrophic errors when calculating Days Away, Restricted, or Transferred (DART) metrics by confusing calendar days with working days. Part 1904 establishes absolute counting rules:

Calendar Days, Not Workdays: Employers must count calendar days , including weekends, scheduled holidays, scheduled vacation days, and plant shutdown days. If a worker is injured on Friday and a doctor places them on "no work" through Monday, Saturday and Sunday must be counted as days away even if the plant is closed on weekends!

Day of Incident is Excluded: Day 1 of the count begins the day after the injury or illness occurred. Do not count the day of the incident.

The 180-Calendar-Day Cap: Under 29 CFR 1904.7(b)(3)(vii), an employer may cap the day count at 180 calendar days . Once a single case reaches 180 days away, 180 days of restriction, or a combined total of 180 days, the employer stops counting and enters "180" in Column K or L.

Stopping the Count Upon Employment Termination: If an employee leaves employment for reasons completely unrelated to the injury (e.g., voluntary retirement, company bankruptcy, plant closure), the employer may stop counting. However, if the employee is terminated or leaves because of the injury, the employer must estimate the probable total calendar days up to the 180-day cap.

Multi-Year Carryover Tracking: If an injury occurs in year 1 and days away continue into year 2, the case is recorded only once—on the Form 300 log for Year 1 . The employer estimates or updates the final day count on the Year 1 log; the case is never re-entered on the Year 2 log.

  • OSHA Forms, Executive Certification & Statutory Reporting THE OSHA RECORDKEEPING COMPLIANCE SUITE
  • ┌────────────────────────────────────────────────────────────────────────┐
  • │ OSHA FORM 301 • Injury and Illness Incident Report │
  • │ Completed within 7 CALENDAR DAYS of notice │
  • ├────────────────────────────────────────────────────────────────────────┤
  • │ OSHA FORM 300 • Log of Work-Related Injuries and Illnesses │
  • │ Columns G (Death), H (Away), I (Transfer), J (Other) │
  • │ Privacy Cases: Omit name, record "Privacy Case" │
  • ├────────────────────────────────────────────────────────────────────────┤
  • │ OSHA FORM 300A • Summary of Work-Related Injuries and Illnesses │
  • │ Annual executive certification; aggregated metrics │
  • │ POSTING: February 1 to April 30 │
  • │ RETENTION: 5 FULL CALENDAR YEARS │
  • └────────────────────────────────────────────────────────────────────────┘
  • Mandatory Executive Certification of Form 300A

To eliminate corporate disavowal of safety performance, 29 CFR 1904.32 mandates that an authorized corporate executive must certify that they have personally examined the OSHA Form 300 log and reasonably believe that the OSHA Form 300A summary is true, accurate, and complete. The Safety Director or EHS Specialist CANNOT legally certify Form 300A unless they occupy one of the following four executive roles :

  • An owner of the company (sole proprietorship or partnership);
  • An officer of the corporation;
  • The highest-ranking company official working at the physical establishment; or

The immediate supervisor of the highest-ranking company official working at the establishment.

Posting, Retention, and Severe Event Reporting Windows

Posting Window: The certified Form 300A must be posted in a conspicuous location where employee notices are customarily displayed from February 1 through April 30 of the year following the log year.

Retention Requirement: Covered employers must retain OSHA Forms 300, 300A, and 301 for five full calendar years following the end of the calendar year covered by the records.

Electronic Submission (OSHA Injury Tracking Application - ITA): Covered establishments with 100+ or 250+ employees in designated high-hazard industries must electronically transmit Form 300A, 300, and 301 data to OSHA annually by March 2.

Severe Event Direct Reporting to OSHA (29 CFR 1904.39):

Fatalities: Must be reported verbally or electronically to OSHA within 8 hours .

In-Patient Hospitalizations, Amputations, or Loss of an Eye: Must be reported to OSHA within 24 hours .

Incident Rate Formulas & Quantitative Calculations

OSHA and the Bureau of Labor Statistics standardize incident rate calculations using a base of 200,000 employee-hours . This base represents the equivalent of 100 full-time employees working 40 hours per week for 50 weeks in a calendar year ( 100 × 40 × 50 = 200 , 000 100 \times 40 \times 50 = 200,000 100 × 40 × 50 = 200 , 000 ).

Core Incident Rate Mathematical Formulas Total Recordable Incident Rate (TRIR) = Total Number of Recordable Cases × 200 , 000 Total Employee Hours Worked \text{Total Recordable Incident Rate (TRIR)} = \frac{\text{Total Number of Recordable Cases} \times 200,000}{\text{Total Employee Hours Worked}} Total Recordable Incident Rate (TRIR) = Total Employee Hours Worked Total Number of Recordable Cases × 200 , 000 ​ DART Rate = ( Cases with Days Away + Cases with Job Restriction/Transfer ) × 200 , 000 Total Employee Hours Worked \text{DART Rate} = \frac{(\text{Cases with Days Away} + \text{Cases with Job Restriction/Transfer}) \times 200,000}{\text{Total Employee Hours Worked}} DART Rate = Total Employee Hours Worked ( Cases with Days Away + Cases with Job Restriction/Transfer ) × 200 , 000 ​ Lost Time Incident Rate (LTIR) = Number of Lost Time Cases (Days Away Only) × 200 , 000 Total Employee Hours Worked \text{Lost Time Incident Rate (LTIR)} = \frac{\text{Number of Lost Time Cases (Days Away Only)} \times 200,000}{\text{Total Employee Hours Worked}} Lost Time Incident Rate (LTIR) = Total Employee Hours Worked Number of Lost Time Cases (Days Away Only) × 200 , 000 ​ Severity Rate (SR) = Total Lost Workdays (Calendar Days Away) × 200 , 000 Total Employee Hours Worked \text{Severity Rate (SR)} = \frac{\text{Total Lost Workdays (Calendar Days Away)} \times 200,000}{\text{Total Employee Hours Worked}} Severity Rate (SR) = Total Employee Hours Worked Total Lost Workdays (Calendar Days Away) × 200 , 000 ​

Worked Mathematical Calculation

Operating Scenario:

A heavy machinery manufacturing plant operates with 450 full-time enterprise employees and 50 temporary contract workers under direct plant supervision. Across the calendar year, the total combined workforce logged 1,040,000 actual hours worked .

During this period, the facility recorded the following occupational events:

4 cases involving days away from work (resulting in 65 cumulative lost calendar days).

3 cases involving job restriction or transfer without days away (resulting in 42 cumulative restricted calendar days).

5 cases requiring medical treatment beyond first aid without days away or job transfer.

8 minor first aid cases (treated on-site with band-aids and non-prescription ice packs).

Step 1: Determine Total Recordable Cases Recordable Cases = ( Days Away Cases ) + ( Restricted Cases ) + ( Medical Treatment Other ) = 4 + 3 + 5 = 12 cases \text{Recordable Cases} = (\text{Days Away Cases}) + (\text{Restricted Cases}) + (\text{Medical Treatment Other}) = 4 + 3 + 5 = 12 \text{ cases} Recordable Cases = ( Days Away Cases ) + ( Restricted Cases ) + ( Medical Treatment Other ) = 4 + 3 + 5 = 12 cases

(Note: The 8 first aid cases are strictly non-recordable and must be excluded.)

Step 2: Calculate TRIR TRIR = 12 × 200 , 000 1 , 040 , 000 = 2 , 400 , 000 1 , 040 , 000 = 2.31 \text{TRIR} = \frac{12 \times 200,000}{1,040,000} = \frac{2,400,000}{1,040,000} = \mathbf{2.31} TRIR = 1 , 040 , 000 12 × 200 , 000 ​ = 1 , 040 , 000 2 , 400 , 000 ​ = 2.31

Step 3: Calculate DART Rate DART Cases = ( Days Away Cases ) + ( Restricted Cases ) = 4 + 3 = 7 cases \text{DART Cases} = (\text{Days Away Cases}) + (\text{Restricted Cases}) = 4 + 3 = 7 \text{ cases} DART Cases = ( Days Away Cases ) + ( Restricted Cases ) = 4 + 3 = 7 cases DART = 7 × 200 , 000 1 , 040 , 000 = 1 , 400 , 000 1 , 040 , 000 = 1.35 \text{DART} = \frac{7 \times 200,000}{1,040,000} = \frac{1,400,000}{1,040,000} = \mathbf{1.35} DART = 1 , 040 , 000 7 × 200 , 000 ​ = 1 , 040 , 000 1 , 400 , 000 ​ = 1.35

Step 4: Calculate LTIR LTIR = 4 × 200 , 000 1 , 040 , 000 = 800 , 000 1 , 040 , 000 = 0.77 \text{LTIR} = \frac{4 \times 200,000}{1,040,000} = \frac{800,000}{1,040,000} = \mathbf{0.77} LTIR = 1 , 040 , 000 4 × 200 , 000 ​ = 1 , 040 , 000 800 , 000 ​ = 0.77

Step 5: Calculate Severity Rate (SR) Severity Rate = 65 × 200 , 000 1 , 040 , 000 = 13 , 000 , 000 1 , 040 , 000 = 12.50 lost calendar days per 100 workers \text{Severity Rate} = \frac{65 \times 200,000}{1,040,000} = \frac{13,000,000}{1,040,000} = \mathbf{12.50} \text{ lost calendar days per 100 workers} Severity Rate = 1 , 040 , 000 65 × 200 , 000 ​ = 1 , 040 , 000 13 , 000 , 000 ​ = 12.50 lost calendar days per 100 workers

Benchmarking Against BLS NAICS & Managing Metric Limitations

Safety leaders benchmark their rates against national industry benchmarks published annually by the Bureau of Labor Statistics (BLS) under the North American Industry Classification System (NAICS) . For example, comparing a facility's TRIR of 2.31 against the NAICS 333 (Machinery Manufacturing) national average of 2.8 provides context for executive boards and insurance underwriters.

The Deadly Flaw of Trailing Metrics and Incentive Traps

Senior safety professionals must actively educate corporate executives regarding the fatal limitations of relying solely on TRIR as a key performance indicator (KPI):

TRIR is a Trailing, Reactive Metric: TRIR measures how many people were injured in the past; it provides zero statistical proof regarding how safely the facility will operate tomorrow. Catastrophic hazards (SIFs) frequently develop in low-TRIR environments.

OSHA Anti-Retaliation Rule (29 CFR 1904.35(b)(1)(iv)): Corporate incentive programs that tie supervisor financial bonuses or frontline team prizes (e.g., pizza parties or $500 drawings for "90 days injury-free") directly to zero-recordable injury rates are heavily scrutinized and frequently cited by OSHA. These programs inevitably create severe peer pressure that actively drives injury reporting underground, hiding critical precursor data and blinding leadership to imminent catastrophic risk.