Study guide
9.1 Permit-Required Confined Space (PRCS) Entry, Atmospheric Testing & Rescue Planning
BCSP Safety Management Professional SMP / SMS
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Management Systems Frameworks & Leadership
1.1 Occupational Safety and Health Management System (OSHMS) Frameworks 1.2 Leadership Commitment, Safety Policy & Meaningful Worker Participation 1.3 OSHMS Planning, Implementation, and Resource Allocation
2 Chapter 2: Operational Management of Change & Training
2.1 Management of Change (MOC) Architecture: Operational, Organizational, and Physical Changes 2.2 Competency Assessment, Needs Analysis & Adult Learning in Safety Training 2.3 Documentation, Document Control, and Retention Systems 2.4 Assessing Hazards of New Products, Chemicals & Equipment Before Introduction
3 Chapter 3: Contractor Safety & Performance Evaluation
3.1 Contractor Safety Pre-Qualification, Oversight & Multi-Employer Worksite Rules 3.2 Internal SH&E Audits, Compliance Reviews & Program Assessments 3.3 Goal Setting, Leading vs. Lagging Indicators & Balanced Scorecards 3.4 Corrective Action Tracking, Root Verification & Continuous Improvement (PDCA)
4 Chapter 4: Hazard Identification & Risk Assessment
4.1 Risk Management Principles, Terminology & ISO 31000 Framework 4.2 Hazard Identification Methodologies: JHA, JSA, and Workplace Walkthroughs 4.3 Qualitative and Semi-Quantitative Risk Assessment Methodologies
5 Chapter 5: Hierarchy of Controls & Prevention Through Design
5.1 The Hierarchy of Controls: Engineering, Administrative, and PPE Selection Criteria 5.2 Prevention through Design (PtD) Principles, Life-Cycle Safety & Design Reviews 5.3 Work Planning, Pre-Task Analysis & Permit-to-Work Systems
6 Chapter 6: Regulatory Exposures, Insurance & Ergonomics
6.1 Regulatory Compliance, OSHA General Duty Clause 5(a)(1) & Liability Exposures 6.2 Risk Financing, Insurance Policies & Workers' Compensation Management 6.3 Experience Modification Rate (EMR) Dynamics and Financial Impact 6.4 Ergonomic Risk Assessment (REBA/RULA/NIOSH Lifting Equation) & MSD Controls
7 Chapter 7: Chemical Hazards, Toxicology, GHS & Regulated Substances
7.1 Occupational Toxicology: Dose-Response, Routes of Entry & Exposure Limits 7.2 Globally Harmonized System (GHS), SDS 16-Section Structure & Chemical Labeling 7.3 Airborne Contaminants, Exposure Monitoring & Local Exhaust Ventilation (LEV) 7.4 Lead: Exposure Limits, Medical Surveillance & Medical Removal Protection 7.5 Asbestos: Exposure Limits, Work Classifications & Control Requirements
8 Chapter 8: Mechanical, Electrical & Kinetic Safety
8.1 Walking-Working Surfaces, Fall Protection Systems & Fall Arrest Calculations 8.2 Machine Guarding Principles, Point of Operation & Mechanical Hazard Controls 8.3 Control of Hazardous Energy (Lockout/Tagout - 29 CFR 1910.147) & Alternative Protection 8.4 Electrical Safety, Arc Flash Assessment & NFPA 70E Safe Work Practices
9 Chapter 9: Confined Spaces, Fire, Environmental & Biological Health Hazards
9.1 Permit-Required Confined Space (PRCS) Entry, Atmospheric Testing & Rescue Planning 9.2 Fire Protection Systems, Life Safety (NFPA 101) & Flammable/Combustible Liquids (NFPA 30) 9.3 Noise Measurement, Hearing Conservation Programs & Noise Reduction Rating (NRR) 9.4 Environmental Health: Heat/Cold Stress, Radiation Safety & Environmental Baseline 9.5 Bloodborne Pathogens & Infectious Materials Exposure Control 9.6 Mold, Allergens & Indoor Air Quality Investigations
10 Chapter 10: Incident Response, Scene Control & Witness Interviewing
10.1 Immediate Incident Response, Notification Triggers & Medical Triage 10.2 Scene Preservation, Physical Evidence Collection & Photographic Documentation 10.3 Cognitive Witness Interviewing, Psychological Safety & Factual Statement Gathering
11 Chapter 11: Causal Analysis, Investigation Reporting & OSHA Recordkeeping
11.1 Causal Analysis Methodologies: 5-Whys, Fishbone, Barrier Analysis & Fault Tree Analysis 11.2 Developing Actionable Recommendations, Investigation Reporting & Action Tracking 11.3 Injury/Illness Rates (TRIR, DART, LTIR Formulas) & OSHA 300/300A/301 Recordkeeping Rules
12 Chapter 12: Emergency Preparedness, Vulnerability Assessment & ICS
12.1 Emergency Action Plans (EAPs), Hazard Vulnerability Assessment & Credible Scenarios 12.2 Incident Command System (ICS) Structure, Unified Command & Emergency Roles 12.3 Emergency Preparedness Exercises, Drills & Plan Gap Analysis
13 Chapter 13: BCSP Ethics & Safety Leadership
13.1 The BCSP Code of Ethics: Professional Conduct, Conflict of Interest & Integrity Scenarios 13.2 Safety Leadership Styles: Transformational vs. Transactional & Felt Leadership 13.3 Worker Engagement, Psychological Safety & Just Culture Frameworks
14 Chapter 14: Financial Justification, Cost Analysis & Safety Economics
14.1 Direct vs. Indirect Costs of Incidents (Heinrich's Iceberg Model & Hidden Losses) 14.2 Financial Justification: Cost-Benefit Analysis (CBA), Net Present Value (NPV) & Safety Capital Budgeting 14.3 Safety Performance Metrics in Business Terms: Enterprise Risk Alignment & TCOR
15 Chapter 15: Measuring Safety Culture, Executive Communication & Change Management
15.1 Assessing and Measuring Safety Culture (Hudson Maturity Ladder & Climate Surveys) 15.2 Executive Communication, C-Suite Engagement & Board Presentations 15.3 Conflict Resolution, Stakeholder Negotiation & Managing Resistance to Safety Change
16 Chapter 16: Occupational Health, Physical Agents & Worker Well-Being
16.1 Occupational Health Programs & Medical Surveillance Requirements 16.2 Hand-Arm and Whole-Body Vibration: Exposure Assessment & Control 16.3 Workplace Stressors, Psychosocial Risk & Worker Mental Health 16.4 Reporting Requirements for Exposures & High-Risk Conditions 16.5 Respiratory Protection & PPE Program Management
17 Chapter 17: Safety Communication, Directives & Written Programs
17.1 Facilitating and Leading Effective Safety Meetings 17.2 Communicating Hazards and Controls to the Workforce 17.3 Writing Safety Directives, Objectives & Written Programs
9.1 Permit-Required Confined Space (PRCS) Entry, Atmospheric Testing & Rescue Planning
Key Takeaways Explain This Topic AI
OSHA 29 CFR 1910.146 defines a confined space by three physical criteria (large enough bodily to enter, limited or restricted entry/exit, not designed for continuous occupancy), while a Permit-Required Confined Space (PRCS) must contain at least one of four recognized serious hazards: atmospheric, engulfment, entrapment geometry, or other serious safety/health hazard.
A PRCS can only be reclassified as a non-permit space under 1910.146(c)(7) if all hazards—including non-atmospheric physical hazards—are completely eliminated without entering the space; alternate entry procedures under 1910.146(c)(5) apply strictly when an actual or potential atmospheric hazard is the sole hazard and continuous forced air ventilation alone is demonstrated to maintain safe entry.
Pre-entry atmospheric testing must be conducted in strict chronological sequence: first oxygen content (19.5% to 23.5%), second flammable gases and vapors (< 10% of the Lower Explosive Limit), and third toxic contaminants (e.g., CO < 35 ppm, H2S < 10 ppm), sampling every 4 feet vertically in the direction of travel to account for gas stratification.
The designated PRCS attendant must remain stationed continuously outside the portal, track entrant identities, monitor conditions, and stays outside until relieved by another attendant.
Non-entry retrieval systems (chest/full-body harness, retrieval line, and mechanical winch for vertical entries deeper than 5 feet) are mandatory unless equipment creates an increased hazard; designated entry rescue teams must conduct hands-on simulated rescues from representative spaces at least once every 12 months.
Last updated: November 2026
9.1 Permit-Required Confined Space (PRCS) Entry, Atmospheric Testing & Rescue Planning
Confined space entry represents one of the most perilous operational activities in modern industry. Across manufacturing facilities, petrochemical refineries, construction sites, and municipal utilities, confined spaces frequently harbor unseen, rapidly fatal hazards. NIOSH's national analysis estimated that about one in four confined-space deaths were would-be rescuers (Suruda et al., 1994)—mostly coworkers who impulsively entered a toxic or oxygen-deficient atmosphere in a desperate, uncoordinated bid to save a fallen colleague.
For the Safety Management Professional (SMS/SMP), managing confined space operations requires moving beyond compliance checklists to establish a rigorous, systems-based defense. This entails precise regulatory classification, systematic atmospheric testing physics, disciplined permitting governance, and fail-safe rescue architectures.
Regulatory Architecture: General Industry vs. Construction
Confined space operations in the United States are governed under two distinct regulatory standards:
General Industry (OSHA 29 CFR 1910.146): The foundational standard established in 1993, governing routine maintenance, manufacturing, and general facility operations.
Construction (OSHA 29 CFR 1926 Subpart AA): Promulgated in 2015 to address the dynamic, multi-employer nature of construction sites. Subpart AA introduces explicit coordination protocols between the Host Employer , the Controlling Contractor , and Entry Employers . It mandates continuous atmospheric monitoring whenever feasible, requires formal competent person space evaluations, and establishes early-warning systems for engulfment hazards (e.g., flash flooding in storm sewer tie-ins).
The Three-Prong Confined Space Baseline
Under both standards, a space must satisfy all three of the following threshold criteria before it is legally classified as a Confined Space : ┌────────────────────────────────────────────────────────────────────────┐
- │ CONFINED SPACE BASELINE CRITERIA │
- ├────────────────────────────────────────────────────────────────────────┤
- │ 1. Is large enough and so configured that an employee can bodily enter │
- │ and perform assigned work; AND │
- │ 2. Has limited or restricted means for entry or exit (e.g., manholes, │
- │ tanks, vessels, silos, storage bins, hoppers, vaults, pits); AND │
- │ 3. Is not designed for continuous employee occupancy. │
- └────────────────────────────────────────────────────────────────────────┘
If any single element is missing (for example, a trench with open, unrestricted ramp egress, or a control booth designed for continuous human occupancy), the space is not a confined space under 29 CFR 1910.146.
Permit-Required Confined Space (PRCS) Criteria
Once a space meets the baseline definition of a confined space, the safety professional must determine whether it qualifies as a Permit-Required Confined Space (PRCS) . Under OSHA 1910.146(b), a PRCS is a confined space that contains or has the potential to contain one or more of the following four serious hazard characteristics:
PRCS Hazard Characteristic Statutory Definition Real-World Operational Examples
1. Hazardous Atmosphere Contains or has a potential to contain a hazardous atmosphere (oxygen deficiency/enrichment, flammable gases/vapors, airborne combustible dusts, or toxic substances). Fermentation tanks generating carbon dioxide; fuel storage tanks with hydrocarbon vapors; sanitary sewer manholes with hydrogen sulfide.
2. Engulfment Hazard Contains a material that has the potential for engulfing an entrant (liquid or finely divided particulate solid that can surround and capture a person). Grain silos containing corn or wheat; fly-ash hoppers; sand bins; wastewater aeration basins.
3. Entrapment / Asphyxiation Geometry Has an internal configuration such that an entrant could be trapped or asphyxiated by inwardly converging walls or by a floor that slopes downward and tapers to a smaller cross-section. Conical bottom hoppers; grain chutes; cyclone separators; duct transitions tapering to narrow discharge gates.
4. Other Recognized Serious Hazard Contains any other recognized serious safety or health hazard (energy sources, mechanical, physical, or environmental). Unguarded rotating agitator blades; uninsulated high-voltage switchgear; steam piping; extreme thermal stress; chemical process piping lacking positive isolation.
Reclassification vs. Alternate Entry Procedures
A critical area of testing on the BCSP SMS exam is the strict operational and legal distinction between Reclassification and Alternate Entry Procedures . PRCS IDENTIFIED
- │
- ┌──────────────────────┴──────────────────────┐
- ▼ ▼
- RECLASSIFICATION: § 1910.146(c)(7) ALTERNATE ENTRY: § 1910.146(c)(5)
- ALL hazards completely ELIMINATED • ONLY hazard is actual/potential atmosphere
- NO atmospheric hazards allowed • Continuous forced-air ventilation ALONE
- Elimination achieved from OUTSIDE space demonstrated sufficient to maintain safety
- Space becomes NON-PERMIT space • Full permit, attendant & rescue team exempt;
- If hazard returns, immediately evacuate documented air monitoring data required
- 1. Reclassification to Non-Permit Space (29 CFR 1910.146(c)(7))
An employer may reclassify a permit space to a non-permit space only if the space poses no actual or potential atmospheric hazards , and if all other hazards are completely eliminated without entering the space:
No Atmospheric Hazards Permitted: If a space harbors an actual or potential atmospheric hazard, it cannot be reclassified under paragraph (c)(7). Safety managers must remember: ventilation controls an atmospheric hazard; it does not eliminate it. If ventilation fails, the toxic or flammable hazard returns.
Complete Mechanical/Energy Elimination: Physical hazards must be eliminated through Lockout/Tagout (29 CFR 1910.147), double block and bleed, line breaking, or blanking/blinding.
Documentation: The employer must generate a written certification document containing the date, location of the space, and the signature of the person certifying that all hazards have been eliminated.
Reversion: The reclassification remains valid only as long as all hazards remain eliminated. If a hazard arises, entrants must immediately exit and the space reverts to full permit status.
2. Alternate Entry Procedures (29 CFR 1910.146(c)(5))
Alternate entry procedures allow an employer to bypass the comprehensive permit program, stationing of an outside attendant, and entry rescue team requirements, but only when all of the following conditions are met:
The employer can demonstrate through documented monitoring data that the only hazard present or potential is an atmospheric hazard.
The employer can demonstrate that continuous forced air ventilation alone is sufficient to maintain that permit space safe for entry.
Pre-entry internal atmospheric testing is performed, and continuous forced air ventilation is directed to the immediate areas where employees are working until all employees have exited.
Testing data must be documented and made available to all entrants prior to entry.
Critical Prohibition: If the space contains any physical hazards, engulfment hazards, or converging wall configurations, paragraph (c)(5) cannot be used, even if continuous ventilation is operational.
Atmospheric Testing Sequence & Stratification Physics
Atmospheric testing is the primary defense against acute confined space fatalities. OSHA 29 CFR 1910.146(d)(5)(iii) mandates a strict chronological sequence for atmospheric testing that safety professionals must enforce without exception.
- 1. The Statutory Testing Order STEP 1: OXYGEN CONTENT Safe Range: 19.5% to 23.5%
- │ • < 19.5%: Oxygen-Deficient (asphyxiation risk)
- │ • > 23.5%: Oxygen-Enriched (drastically accelerated flammability)
- ▼
- STEP 2: FLAMMABLE GASES Limit: < 10% of the Lower Explosive Limit (LEL)
- │ • Catalytic bead sensors REQUIRE adequate oxygen (≥ 10-14%)
│ to combust and measure flammables accurately!
- ▼
- STEP 3: TOXIC CONTAMINANTS Limits: Below established OSHA PELs / ACGIH TLVs
- Carbon Monoxide (CO): < 35 ppm OSHA PEL / < 25 ppm TLV
- Hydrogen Sulfide (H2S): < 10 ppm TLV / 20 ppm ceiling
Safety Science Rationale for the Testing Sequence:
Oxygen must be evaluated first for two vital reasons. First, human cognitive function and life depend on sufficient oxygen. Second, the catalytic bead sensors standard in most multi-gas monitors rely on an actual internal combustion reaction across a heated detector filament to measure the percentage of the Lower Explosive Limit (% LEL). If oxygen concentration drops below 10% to 14%, catalytic bead sensors will produce an erroneous, falsely low combustible gas reading, dangerously deceiving the safety team. Toxic testing is conducted last because combustible concentrations can detonate immediately, presenting a rapid catastrophic event.
2. Stratification Physics & Probe Travel Time
Gases do not mix uniformly inside stagnant confined spaces; they stratify based on their molecular weight relative to ambient air (Vapor Density of Air = 1.00):
- Contaminant Chemical Formula Molecular Weight Vapor Density (Air = 1.0) Stratification Zone inside Space
- Methane CH 4 \text{CH}_4 CH 4 16.04 g/mol ~0.55 Top: Rises to highest pocket of the ceiling/dome
- Carbon Monoxide CO \text{CO} CO 28.01 g/mol ~0.97 Middle: Uniformly disperses throughout breathing zone
- Nitrogen (inert gas) N 2 \text{N}_2 N 2 28.01 g/mol ~0.97 Middle: Displaces air, creates oxygen deficiency
Air (Reference) ∼ 78 % N 2 , 21 % O 2 \sim 78\% \text{N}_2, 21\% \text{O}_2 ∼ 78% N 2 , 21% O 2 28.97 g/mol 1.00 Reference baseline
Hydrogen Sulfide H 2 S \text{H}_2\text{S} H 2 S 34.08 g/mol ~1.19 Bottom: Settles in sumps, low trenches, and sludge layers
Carbon Dioxide CO 2 \text{CO}_2 CO 2 44.01 g/mol ~1.52 Bottom: Pools in bottom depressions, displaces oxygen
Gasoline Vapors Mixed C 4 − C 12 \text{C}_4-\text{C}_{12} C 4 − C 12 ~86-100 g/mol 3.0 to 4.0 Bottom: Heavy vapors pool on floors and sumps
Testing Distance and Probe Travel Lag
OSHA requires atmospheric testing to be conducted every 4 feet (1.2 meters) vertically in the direction of travel and around the perimeter.
When using a remote sampling pump with sample tubing, the safety professional must calculate the Total Sampling Lag Time ( t total t_{\text{total}} t total ) before recording a stable reading at each 4-foot elevation: t total = t sensor + ( L × r travel ) t_{\text{total}} = t_{\text{sensor}} + (L \times r_{\text{travel}}) t total = t sensor + ( L × r travel )
Where:
t sensor t_{\text{sensor}} t sensor = instrument sensor response time to reach 90% of final reading ( T 90 T_{90} T 90 , typically 15 to 30 seconds for electrochemical and catalytic sensors)
L L L = length of sampling line in feet
r travel r_{\text{travel}} r travel = sample transit rate inside the tubing (standard industry rule of thumb: 1 to 2 seconds per foot of hose )
Sample Calculation: A safety technician tests a 20-foot vertical sewer vault using a multi-gas monitor with a 20-foot sample hose and a rated T 90 T_{90} T 90 sensor response time of 20 seconds.
Transit lag: 20 ft × 1 sec/ft = 20 seconds 20\ \text{ft} \times 1\ \text{sec/ft} = 20\ \text{seconds} 20 ft × 1 sec/ft = 20 seconds .
Total response time at each depth: 20 seconds (transit) + 20 seconds (sensor) = 40 seconds 20\ \text{seconds (transit)} + 20\ \text{seconds (sensor)} = 40\ \text{seconds} 20 seconds (transit) + 20 seconds (sensor) = 40 seconds .
Lowering the probe prematurely without pausing for at least 40 seconds per 4-foot increment will fail to detect stratified pockets of lethal hydrogen sulfide or methane.
Operational Team Roles and Statutory Legal Duties
OSHA 29 CFR 1910.146 explicitly establishes three operational roles, each carrying distinct, non-delegable legal duties:
1. Authorized Entrant
Understands space hazards, routes of exposure, and the signs, symptoms, and physiological consequences of exposure.
Properly uses required personal protective equipment (PPE), testing instruments, and retrieval gear.
Maintains continuous two-way communication with the attendant.
Mandatory Evacuation: Must exit the space immediately whenever ordered by the attendant or entry supervisor, whenever any evacuation alarm sounds, or whenever the entrant detects any behavioral symptom of hazard exposure or discovers a prohibited condition.
2. Confined Space Attendant
Stationed continuously outside the permit space near the entrance portal.
Maintains an accurate, real-time count and identity of all authorized entrants inside the space.
Monitors activities inside and outside the space to determine if it is safe for entrants to remain inside.
Remains outside until relieved by another qualified attendant. CRITICAL RULE: A relieved attendant may enter for rescue only if the program allows it and the attendant is trained and equipped.
Continuously assesses entrant behavior for signs of toxic exposure or oxygen deficiency.
Summons designated emergency rescue services immediately upon recognizing an emergency.
Operates non-entry mechanical retrieval equipment from outside the portal.
3. Entry Supervisor
Determines that entry requirements have been satisfied, verifies that all atmospheric tests have been conducted, and verifies that all procedures, isolation blanks, and emergency rescue services specified on the permit are in place before endorsing the permit and authorizing entry.
Removes unauthorized individuals who enter or attempt to enter the space.
Determines at required intervals that entry operations remain consistent with permit terms.
Permit Cancellation: Formally terminates entry and cancels the permit when operations are concluded, or whenever an unexpected, out-of-spec condition arises in or near the space.
Rescue and Emergency Services
Rescue planning is the definitive safeguard against multiple-fatality disasters in confined spaces. OSHA 29 CFR 1910.146(k) delineates two primary rescue paradigms: Non-Entry Rescue and Entry Rescue Teams .
1. Non-Entry Rescue Architecture (The Preferred Line of Defense)
To prevent secondary fatalities among rescuers, non-entry retrieval systems are legally mandatory for permit space entry unless the retrieval equipment would increase the overall risk of entry or would not contribute to the rescue of the entrant:
Harness: Each authorized entrant must wear a chest or full-body harness with a retrieval line attached at the center of the entrant's back near shoulder level (D-ring), or above the entrant's head.
Wristlets: Wristlets may be used only if the employer can demonstrate that the use of a chest or full-body harness is infeasible or creates a greater hazard.
Mechanical Winch: A mechanical retrieval device (such as a tripod-mounted personnel-rated winch) must be available to retrieve personnel from vertical permit spaces more than 5 feet (1.52 meters) deep .
2. Designated Entry Rescue Teams
If non-entry retrieval is infeasible (e.g., internal piping, baffles, or tortuous geometries that would snag a lifeline), the employer must designate and vet an on-site or off-site rescue service under 1910.146(k):
Evaluation of Capability: The employer must evaluate a prospective rescue service's ability to respond to a rescue summons in a timely manner (taking into account the hazard profile: oxygen deficiency demands response within 3 to 4 minutes), and verify that the rescue service has appropriate equipment (SCBA, litters, confined space high-angle extraction rigging).
Facility Access: The employer must provide the rescue team with access to all permit spaces from which rescue may be necessary so the team can develop rescue plans and pre-rig access.
Annual Hands-on Simulated Rescues: The rescue team must practice making permit space rescues at least once every 12 months by means of simulated rescue operations in which they remove dummies, mannequins, or actual persons through representative openings and configurations that simulate the types of permit spaces from which rescue may be required.
First Aid and CPR: Each member of the rescue service must be trained in basic first aid and CPR, with at least one member currently certified in CPR and first aid immediately available.
- Senior Safety Manager Pitfalls
- Pitfall 1: Treating Alternate Entry (§ 1910.146(c)(5)) as a Blanket Permitting Bypass
Operations managers frequently pressure safety professionals to classify entries under paragraph (c)(5) to eliminate the cost and labor of outside attendants and rescue teams. Safety managers must maintain strict technical vigilance: alternate entry is legally invalid if the space contains any physical, mechanical, electrical, or engulfment hazards. If a storage vessel contains an internal mixer, even if locked out, or if its bottom slopes downward, it fails the threshold for alternate entry and must be handled under full permit procedures unless completely reclassified under (c)(7).
Pitfall 2: Neglecting Sample Tubing Transit Time and Gas Stratification
Relying on technicians who insert a sample hose into a manhole, view the monitor for 5 seconds, and pronounce the space "clean." At a transit rate of 1 second per foot plus a 20-second sensor lag, sampling a 20-foot deep vault requires at least 40 seconds at each 4-foot increment. Failing to wait causes technicians to miss heavy, stagnant layers of hydrogen sulfide pooling in sludge at the floor level.
Pitfall 3: Listing "Call 911" as the Designated Emergency Rescue Plan
Citing the local municipal fire department on a permit without prior written agreements, site walk-throughs, and verification of confined space technical rescue capability. Many volunteer or municipal fire departments lack technician-level confined space rescue certifications, specialized retrieval tripods, or self-contained breathing apparatus equipped with airline umbilicals. Relying on an unverified 911 service violates 29 CFR 1910.146(k) and results in fatal rescue delays during an emergency.