Study guide
17.3 Writing Safety Directives, Objectives & Written Programs
BCSP Safety Management Professional SMP / SMS
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Management Systems Frameworks & Leadership
1.1 Occupational Safety and Health Management System (OSHMS) Frameworks 1.2 Leadership Commitment, Safety Policy & Meaningful Worker Participation 1.3 OSHMS Planning, Implementation, and Resource Allocation
2 Chapter 2: Operational Management of Change & Training
2.1 Management of Change (MOC) Architecture: Operational, Organizational, and Physical Changes 2.2 Competency Assessment, Needs Analysis & Adult Learning in Safety Training 2.3 Documentation, Document Control, and Retention Systems 2.4 Assessing Hazards of New Products, Chemicals & Equipment Before Introduction
3 Chapter 3: Contractor Safety & Performance Evaluation
3.1 Contractor Safety Pre-Qualification, Oversight & Multi-Employer Worksite Rules 3.2 Internal SH&E Audits, Compliance Reviews & Program Assessments 3.3 Goal Setting, Leading vs. Lagging Indicators & Balanced Scorecards 3.4 Corrective Action Tracking, Root Verification & Continuous Improvement (PDCA)
4 Chapter 4: Hazard Identification & Risk Assessment
4.1 Risk Management Principles, Terminology & ISO 31000 Framework 4.2 Hazard Identification Methodologies: JHA, JSA, and Workplace Walkthroughs 4.3 Qualitative and Semi-Quantitative Risk Assessment Methodologies
5 Chapter 5: Hierarchy of Controls & Prevention Through Design
5.1 The Hierarchy of Controls: Engineering, Administrative, and PPE Selection Criteria 5.2 Prevention through Design (PtD) Principles, Life-Cycle Safety & Design Reviews 5.3 Work Planning, Pre-Task Analysis & Permit-to-Work Systems
6 Chapter 6: Regulatory Exposures, Insurance & Ergonomics
6.1 Regulatory Compliance, OSHA General Duty Clause 5(a)(1) & Liability Exposures 6.2 Risk Financing, Insurance Policies & Workers' Compensation Management 6.3 Experience Modification Rate (EMR) Dynamics and Financial Impact 6.4 Ergonomic Risk Assessment (REBA/RULA/NIOSH Lifting Equation) & MSD Controls
7 Chapter 7: Chemical Hazards, Toxicology, GHS & Regulated Substances
7.1 Occupational Toxicology: Dose-Response, Routes of Entry & Exposure Limits 7.2 Globally Harmonized System (GHS), SDS 16-Section Structure & Chemical Labeling 7.3 Airborne Contaminants, Exposure Monitoring & Local Exhaust Ventilation (LEV) 7.4 Lead: Exposure Limits, Medical Surveillance & Medical Removal Protection 7.5 Asbestos: Exposure Limits, Work Classifications & Control Requirements
8 Chapter 8: Mechanical, Electrical & Kinetic Safety
8.1 Walking-Working Surfaces, Fall Protection Systems & Fall Arrest Calculations 8.2 Machine Guarding Principles, Point of Operation & Mechanical Hazard Controls 8.3 Control of Hazardous Energy (Lockout/Tagout - 29 CFR 1910.147) & Alternative Protection 8.4 Electrical Safety, Arc Flash Assessment & NFPA 70E Safe Work Practices
9 Chapter 9: Confined Spaces, Fire, Environmental & Biological Health Hazards
9.1 Permit-Required Confined Space (PRCS) Entry, Atmospheric Testing & Rescue Planning 9.2 Fire Protection Systems, Life Safety (NFPA 101) & Flammable/Combustible Liquids (NFPA 30) 9.3 Noise Measurement, Hearing Conservation Programs & Noise Reduction Rating (NRR) 9.4 Environmental Health: Heat/Cold Stress, Radiation Safety & Environmental Baseline 9.5 Bloodborne Pathogens & Infectious Materials Exposure Control 9.6 Mold, Allergens & Indoor Air Quality Investigations
10 Chapter 10: Incident Response, Scene Control & Witness Interviewing
10.1 Immediate Incident Response, Notification Triggers & Medical Triage 10.2 Scene Preservation, Physical Evidence Collection & Photographic Documentation 10.3 Cognitive Witness Interviewing, Psychological Safety & Factual Statement Gathering
11 Chapter 11: Causal Analysis, Investigation Reporting & OSHA Recordkeeping
11.1 Causal Analysis Methodologies: 5-Whys, Fishbone, Barrier Analysis & Fault Tree Analysis 11.2 Developing Actionable Recommendations, Investigation Reporting & Action Tracking 11.3 Injury/Illness Rates (TRIR, DART, LTIR Formulas) & OSHA 300/300A/301 Recordkeeping Rules
12 Chapter 12: Emergency Preparedness, Vulnerability Assessment & ICS
12.1 Emergency Action Plans (EAPs), Hazard Vulnerability Assessment & Credible Scenarios 12.2 Incident Command System (ICS) Structure, Unified Command & Emergency Roles 12.3 Emergency Preparedness Exercises, Drills & Plan Gap Analysis
13 Chapter 13: BCSP Ethics & Safety Leadership
13.1 The BCSP Code of Ethics: Professional Conduct, Conflict of Interest & Integrity Scenarios 13.2 Safety Leadership Styles: Transformational vs. Transactional & Felt Leadership 13.3 Worker Engagement, Psychological Safety & Just Culture Frameworks
14 Chapter 14: Financial Justification, Cost Analysis & Safety Economics
14.1 Direct vs. Indirect Costs of Incidents (Heinrich's Iceberg Model & Hidden Losses) 14.2 Financial Justification: Cost-Benefit Analysis (CBA), Net Present Value (NPV) & Safety Capital Budgeting 14.3 Safety Performance Metrics in Business Terms: Enterprise Risk Alignment & TCOR
15 Chapter 15: Measuring Safety Culture, Executive Communication & Change Management
15.1 Assessing and Measuring Safety Culture (Hudson Maturity Ladder & Climate Surveys) 15.2 Executive Communication, C-Suite Engagement & Board Presentations 15.3 Conflict Resolution, Stakeholder Negotiation & Managing Resistance to Safety Change
16 Chapter 16: Occupational Health, Physical Agents & Worker Well-Being
16.1 Occupational Health Programs & Medical Surveillance Requirements 16.2 Hand-Arm and Whole-Body Vibration: Exposure Assessment & Control 16.3 Workplace Stressors, Psychosocial Risk & Worker Mental Health 16.4 Reporting Requirements for Exposures & High-Risk Conditions 16.5 Respiratory Protection & PPE Program Management
17 Chapter 17: Safety Communication, Directives & Written Programs
17.1 Facilitating and Leading Effective Safety Meetings 17.2 Communicating Hazards and Controls to the Workforce 17.3 Writing Safety Directives, Objectives & Written Programs
17.3 Writing Safety Directives, Objectives & Written Programs
Key Takeaways Explain This Topic AI
OSHA requires written programs for hazard communication, lockout/tagout energy control procedures, permit-required confined spaces, respiratory protection, bloodborne pathogens, process safety management, and emergency action plans, among others.
29 CFR 1910.38(b) permits an employer with 10 or fewer employees to communicate the emergency action plan orally; every larger employer must have it in writing, kept in the workplace and available to employees.
A directive hierarchy runs policy, program, procedure, work instruction, with each level answering a different question, and collapsing them produces documents that are simultaneously too vague to follow and too detailed to read.
Directives must assign obligations to named roles rather than to named individuals or to the passive voice, because a requirement with no accountable role cannot be enforced or audited.
Vague qualifiers such as "as appropriate", "where feasible", and "adequate" without defined criteria convert a requirement into an opinion and are the most common defect in safety writing.
Last updated: September 2026
17.3 Writing Safety Directives, Objectives & Written Programs
"Write directives to meet safety objectives and activities" is a named skill in the BCSP blueprint, and it is one of the few genuinely craft-based competencies the credential tests. A safety management professional spends a substantial share of their working life producing written instruments — policies, programs, procedures, work instructions, bulletins, objectives — and the quality of that writing determines whether technical analysis ever becomes practice.
The failure is almost never that the author did not know the subject. It is that the document does not say who must do what, by when, to what standard, and what happens if the condition is not met .
Which Written Programs Are Actually Required
Many organizations write documents nobody requires while missing ones that are mandatory. The principal federal written requirements:
- Requirement Citation
- Hazard communication program , including the list of hazardous chemicals 29 CFR 1910.1200(e)
- Energy control (lockout/tagout) procedures 29 CFR 1910.147(c)(4)
- Permit-required confined space program 29 CFR 1910.146(c)(4)
- Respiratory protection program with worksite-specific procedures 29 CFR 1910.134(c)
- Bloodborne pathogens Exposure Control Plan 29 CFR 1910.1030(c)
- Process safety management elements including written operating procedures 29 CFR 1910.119
- Emergency action plan 29 CFR 1910.38
- Fire prevention plan 29 CFR 1910.39
- Hearing conservation elements within the noise program 29 CFR 1910.95
- PPE hazard assessment certification 29 CFR 1910.132(d)(2)
- HAZWOPER safety and health program 29 CFR 1910.120(b)
- Lead and asbestos compliance programs where exposures exceed the PEL 29 CFR 1910.1025, 1910.1001
- Fall protection plan (narrow circumstances) 29 CFR 1926.502(k)
A frequently tested nuance: 29 CFR 1910.38(b) provides that an emergency action plan must be in writing, kept in the workplace, and available to employees for review , but an employer with 10 or fewer employees may communicate the plan orally . The same structure appears in the fire prevention plan standard.
The Directive Hierarchy
Each level answers a different question. Collapsing them produces the characteristic organizational document that is simultaneously too vague to follow and too long to read.
- Level Question it answers Typical length Approved by
- Policy What do we commit to, and why? 1 page Chief executive
- Program How is this hazard managed across the organization, and who is accountable? 5–20 pages Function head
- Procedure How is this task performed, step by step? 2–10 pages Department manager
- Work instruction / job aid What exactly do I do at this machine, right now? 1 page, often visual Supervisor
- Directive / bulletin What changes, effective when, pending revision of the above? 1 page Issuing authority
A directive is the instrument for a change that must take effect before the underlying program can be revised — after an incident, a regulatory change, or a newly identified hazard. Its discipline is that it must carry an effective date and either an expiry date or a commitment to fold the change into the governing document, or the organization accumulates a shadow rule set that nobody can reconcile.
Writing Safety Objectives
ISO 45001 requires objectives to be consistent with the policy, measurable or capable of performance evaluation, monitored, communicated, and updated. In practice, use SMART :
❌ "Improve contractor safety performance."
✅ "By 31 March 2027, 100 percent of contractors in risk tiers 1 and 2 will have completed prequalification through the new platform, with the procurement manager accountable and monthly reporting to the operations director."
Three cautions specific to safety objectives:
Do not set objectives on injury rate alone. A target expressed only as a recordable rate creates direct pressure to suppress reporting. Pair any outcome target with leading activity and quality measures.
Assign the objective to the line, not to the safety department. An objective owned by safety is a safety department objective; an objective owned by the operations director is an organizational one.
Make the measurement method explicit at the point the objective is written, not after the period closes.
Drafting Rules That Produce Enforceable Text
Name the accountable role, never a person, never the passive voice.
❌ "Inspections shall be conducted monthly."
✅ "The area supervisor shall inspect each fall-protection anchor point at least once per calendar month and record the result in the maintenance system."
Use "shall" or "must" for requirements, "should" for recommendations, and say which you mean at the front of the document. Mixing them without definition makes the whole document advisory.
One requirement per sentence, one action per step. Compound steps hide missed actions.
Define the measurable criterion. This is the single most valuable habit in safety writing.
❌ "Adequate lighting shall be provided."
✅ "Illumination at the work surface shall be at least 50 foot-candles, verified with a light meter at commissioning and after any change to the lighting layout."
Eliminate the escape hatches. "As appropriate", "where feasible", "as necessary", "adequate", "sufficient", "in a timely manner", and "as required" convert a requirement into an opinion, and an auditor cannot test them. If discretion is genuinely intended, say who exercises it and on what basis: "The competent person may authorize an alternative anchorage where the designed anchorage is unavailable, provided the alternative is documented on the permit and rated for 5,000 pounds per attached worker."
State the stop condition. Good safety documents say what to do when the requirement cannot be met. A procedure with no exception path guarantees an undocumented workaround.
Write for the reader who will use it. A work instruction for a production line is written at the line's reading level, in the workforce's language, with photographs of the actual equipment — not in regulatory prose.
Reference, do not duplicate. Copying regulatory text into a procedure means it becomes wrong the moment the regulation changes. Cite it.
Document Control
Every controlled safety document needs a unique identifier, version number, effective date, approval authority, review cycle, and change history . Two disciplines matter most in practice:
A review trigger, not just a review date. Documents must be reviewed on a fixed cycle and on specified triggers: a relevant incident, a process or equipment change, a regulatory change, an audit finding.
Controlled distribution and withdrawal. Superseded versions must be removed from circulation. The most dangerous document in an organization is an obsolete procedure still hanging at a workstation, because it carries full apparent authority.
Senior manager pitfall. Judging the program by the binder. A thick, well-formatted, current-on-its-face manual that nobody at the workface has read is worse than a thin one, because it creates management confidence that the hazard is handled and it gives an investigator a written standard the organization demonstrably failed to meet. Test the document by asking a worker to perform the task from it.