Study guide
Hazard Communication and GHS
BCSP Safety Trained Supervisor Construction STSC
Track your progress as you read
Finished sections get a check mark.
1 STSC Overview & OSHA 1926 Framework
The STSC Credential, Eligibility, and Exam Format How 29 CFR 1926 Is Organized Supervisor Roles and Responsibilities Under 1926
2 Safety Program Implementation
Safety Management Systems and Construction Safety Programs Training, Orientation, and Toolbox Talks Recordkeeping: OSHA 300 Forms and Safety Metrics Inspections, Audits, and Corrective Action
3 Hazard Identification & Control
Job Hazard Analysis and Risk Assessment The Hierarchy of Controls PPE Selection and Use Hazard Communication and GHS
4 The Fatal Four Construction Hazards
Fall Protection Systems Excavation and Trenching Safety Electrical Safety and Lockout/Tagout Struck-By and Caught-In/Between Hazards
5 Health Hazards & Industrial Hygiene
Chemical and Airborne Exposures: PELs, Lead, and Asbestos Silica, Noise, and Respiratory Protection Ergonomics and Heat/Cold Stress
6 Emergency Preparedness & Leadership
Emergency Action Plans & Fire Prevention Confined Space Entry in Construction Incident Investigation & Root Cause Analysis Safety Leadership & Ethics
Hazard Communication and GHS
Key Takeaways Explain This Topic AI
Construction adopts the Hazard Communication Standard through 29 CFR 1926.59, which incorporates 29 CFR 1910.1200; HazCom ranked second on OSHA's preliminary fiscal year 2026 most-cited list.
A compliant written hazcom program requires four pillars: a written program, a chemical inventory, labels, Safety Data Sheets (SDS), and worker training on each.
GHS labels require six elements: product identifier, signal word, hazard statements, pictograms, precautionary statements, and supplier identification.
There are two signal words only: DANGER for more severe hazards and WARNING for less severe; GHS defines nine pictograms but OSHA enforces eight (the Environment pictogram is EPA's domain).
Safety Data Sheets use a standardized 16-section format; the HCS 2024 final rule (published May 20, 2024) aligned with GHS Revision 7, with manufacturers' substance labels and SDSs due by May 19, 2026 and mixtures by November 19, 2027; employer updates are due November 20, 2026 for substances and May 19, 2028 for mixtures.
Last updated: November 2026
What HazCom Is and Where It Lives
The Hazard Communication Standard (HCS) – often called HazCom or the "Right-to-Know" standard – ensures that workers and supervisors know the identity and hazards of every chemical on site and how to protect themselves. The base standard is 29 CFR 1910.1200 ; construction adopts it through 29 CFR 1926.59 , which simply points to the 1910 text. HazCom ranked second on OSHA's preliminary top 10 most-cited standards for fiscal year 2026.
In 2012 OSHA aligned the HCS with the United Nations Globally Harmonized System of Classification and Labelling of Chemicals (GHS) . This replaced the old Material Safety Data Sheet (MSDS) with the standardized Safety Data Sheet (SDS) and introduced uniform labels and pictograms.
The Four (Plus One) Pillars of a Written Program
A compliant employer hazcom program must contain:
A written hazard communication program describing how the site meets the standard.
A chemical inventory – a list of all hazardous chemicals on site.
Labels on every container.
Safety Data Sheets readily accessible to workers on every shift.
Worker training on the program, labels, SDS, and chemical hazards.
Training is required at initial assignment and whenever a new hazard is introduced. Workers must be able to locate and interpret an SDS quickly.
GHS Label Elements – Memorize Six
Every shipped container of a hazardous chemical must carry a GHS-compliant label with six required elements :
- # Element What It Tells the Worker
- 1 Product Identifier Chemical/product name matching the SDS
- 2 Signal Word Severity: "Danger" or "Warning"
- 3 Hazard Statement(s) Standardized phrase of the hazard (e.g., "Causes skin burns")
- 4 Pictogram(s) Red-bordered symbol(s) of the hazard class
- 5 Precautionary Statement(s) How to handle, store, and respond
- 6 Supplier Identification Name, address, phone of manufacturer/importer
- Signal Words – Only Two
GHS uses exactly two signal words :
DANGER – used for the more severe hazard categories.
WARNING – used for the less severe categories.
A label carries only one signal word – the one for the most severe hazard present. If a question lists "Caution," "Notice," or "Poison" as signal words, those are wrong – they are old MSDS-era terms, not GHS.
Pictograms – Nine Defined, Eight Enforced
GHS defines nine pictograms , each a black symbol inside a red-bordered diamond on a white background . OSHA enforces eight of them; the ninth, the Environment pictogram (a dead tree and fish), is the EPA's domain, not OSHA's. Know the eight OSHA cares about:
Health Hazard (figure with a starburst chest) – carcinogen, respiratory sensitizer, reproductive toxicity.
Flame – flammables, pyrophorics, self-heating.
Exclamation Mark – irritant, skin sensitizer, narcotic effects.
Gas Cylinder – gases under pressure.
Corrosion – skin/eye burns, metal corrosive.
Exploding Bomb – explosives, self-reactive, organic peroxides.
Flame Over Circle – oxidizers.
Skull and Crossbones – acute (severe) toxicity.
Do not confuse GHS pictograms with the old NFPA 704 diamond (the blue/red/yellow/white 0-4 rating). NFPA is for emergency responders, not worker right-to-know labeling – a common distractor.
The 16-Section Safety Data Sheet
The SDS follows a fixed 16-section order so any worker can find the same information in the same place on any chemical. You should know the early sections, which appear in scenario questions:
- Identification
- Hazard(s) Identification
- Composition / Ingredients
- First-Aid Measures
- Fire-Fighting Measures
- Accidental Release Measures
- Handling and Storage
- Exposure Controls / PPE
Sections 9–16 cover physical/chemical properties, stability/reactivity, toxicology, ecological, disposal, transport, regulatory, and other information. Sections 12–15 (ecological, disposal, transport, regulatory) are not OSHA-enforced because they fall under other agencies, but they must still appear.
HCS 2024 – the GHS Revision 7 Update
OSHA published the HCS 2024 final rule on May 20, 2024 (effective July 19, 2024), aligning the standard with GHS Revision 7 . Phased compliance deadlines:
Substance labels and SDS: manufacturers, importers, and distributors by May 19, 2026 ; employers update workplace labels, the written program, and training by November 20, 2026 .
Mixture labels and SDS: manufacturers, importers, and distributors by November 19, 2027 ; employers by May 19, 2028 .
OSHA extended these dates by four months on January 15, 2026. During the transition, chemical manufacturers, importers, distributors, and employers may comply with HCS 2012, HCS 2024, or both.
Common Traps and the Supervisor's Duty
Confusing MSDS (old) with SDS (current 16-section format) – the SDS is correct.
Listing "Caution" or "Poison" as a GHS signal word – only Danger and Warning exist.
Mixing up GHS pictograms with the NFPA 704 fire diamond.
Forgetting that secondary/workplace containers must also be labeled (at minimum the product identifier and hazard information) when a chemical is transferred from its original container and not used immediately.
The supervisor's core duty: ensure every container is labeled, every SDS is accessible on every shift, and every worker is trained to read both before handling the chemical.
Multi-Employer Sites and HazCom
Construction sites are almost always multi-employer, and HazCom has a specific rule for this. When a contractor brings a hazardous chemical onto a shared site, the host or controlling employer's program must address how SDSs are made available to other on-site employers, how labeling is handled in shared work areas, and how each employer informs the others of the hazards their workers may encounter and the protective measures needed. A subcontractor cannot assume the general contractor will warn its crew – the duty to communicate runs both ways.
When two trades work in the same area, each employer must share SDS and hazard information through the site program.
Workplace (Secondary) Container Labeling
A frequent field violation: a worker pours a solvent or fuel from its labeled drum into an unlabeled bucket or spray bottle. Secondary (workplace) containers must be labeled with at least the product identifier and the general hazard information (words, pictures, symbols, or a combination that conveys the hazards) unless the chemical is used immediately by the person who transferred it and the container is emptied at the end of the shift. Relabeling or leaving a transferred chemical for the next shift without a workplace label is a citable hazcom failure.
Training Content and Timing
HazCom training is not a one-time orientation checkbox. Workers must be trained at initial assignment and whenever a new chemical hazard is introduced into their work area. Required content includes the operations where hazardous chemicals are present, the location and availability of the written program and SDSs, how to detect the presence or release of a chemical (monitoring, appearance, odor), the physical and health hazards , the protective measures (work practices, engineering controls, PPE, emergency procedures), and how to read labels and SDSs .
The supervisor verifies comprehension, not just attendance – a signed roster alone does not prove the worker can interpret a pictogram or find Section 8 of an SDS.