Study guide
Job Hazard Analysis and Risk Assessment
BCSP Safety Trained Supervisor Construction STSC
Track your progress as you read
Finished sections get a check mark.
1 STSC Overview & OSHA 1926 Framework
The STSC Credential, Eligibility, and Exam Format How 29 CFR 1926 Is Organized Supervisor Roles and Responsibilities Under 1926
2 Safety Program Implementation
Safety Management Systems and Construction Safety Programs Training, Orientation, and Toolbox Talks Recordkeeping: OSHA 300 Forms and Safety Metrics Inspections, Audits, and Corrective Action
3 Hazard Identification & Control
Job Hazard Analysis and Risk Assessment The Hierarchy of Controls PPE Selection and Use Hazard Communication and GHS
4 The Fatal Four Construction Hazards
Fall Protection Systems Excavation and Trenching Safety Electrical Safety and Lockout/Tagout Struck-By and Caught-In/Between Hazards
5 Health Hazards & Industrial Hygiene
Chemical and Airborne Exposures: PELs, Lead, and Asbestos Silica, Noise, and Respiratory Protection Ergonomics and Heat/Cold Stress
6 Emergency Preparedness & Leadership
Emergency Action Plans & Fire Prevention Confined Space Entry in Construction Incident Investigation & Root Cause Analysis Safety Leadership & Ethics
Job Hazard Analysis and Risk Assessment
Key Takeaways Explain This Topic AI
A Job Hazard Analysis (JHA), also called a Job Safety Analysis (JSA) or Activity Hazard Analysis (AHA), breaks a task into steps, identifies the hazard in each step, and assigns a control before work begins.
On the STSC, the purpose of a JHA is prevention and pre-task planning, never assigning blame, documenting for insurance, or tracking productivity.
Risk is the product of severity times probability; a risk matrix ranks hazards so the highest risk-priority items get controlled first.
Prioritize JHAs for tasks with a history of incidents, high injury potential, new or changed processes, complex multi-step jobs, and the Fatal Four exposures.
Daily pre-task planning with crew involvement (toolbox talk plus JHA review) lets workers think through today's specific hazards before starting.
Last updated: November 2026
What a Job Hazard Analysis Is
A Job Hazard Analysis (JHA) is a documented, step-by-step examination of a task that identifies the hazards in each step and specifies the controls needed before work begins. You will see three names for essentially the same tool:
JHA – Job Hazard Analysis (OSHA's preferred term, OSHA Publication 3071).
JSA – Job Safety Analysis (older industry term, identical method).
AHA – Activity Hazard Analysis (used on some federal and contract jobs, identical method).
The key idea is the purpose : a JHA exists to prevent injuries through pre-task planning. It is not a tool to assign blame for past incidents, to document a job for insurance, or to track productivity. The prevention answer is the one that says "break a task into steps, identify hazards, and specify controls."
The Three-Column Structure
Every JHA is built on three columns: step, hazard, control.
Step Hazard Control
Break the job into sequential basic steps Identify what could go wrong in that step Specify how to eliminate or reduce the hazard
- Set up cut saw Respirable silica dust; rotating blade Wet-cutting water feed (Table 1); blade guard; N95
- Lift panel into place Struck-by; caught-between; back strain Tag line; exclusion zone; two-person lift
A classic trap: a step is not a hazard. "Climb the ladder" is a step; "fall from height" is the hazard; "maintain three points of contact and tie off above 6 feet" is the control.
How to Build a JHA – Step by Step
Select the job. You cannot analyze everything, so prioritize (see below).
Involve the worker. The person who does the task knows its real hazards; OSHA stresses employee participation.
Break the job into steps. Keep steps broad enough to be useful but narrow enough that each has identifiable hazards.
Identify hazards in each step. Ask what can strike, crush, cut, burn, shock, or expose the worker, and what energy sources are present.
Develop controls using the hierarchy of controls (elimination first, PPE last).
Review and revise after any incident, near-miss, process change, or new equipment.
Prioritizing Which Jobs to Analyze
OSHA Publication 3071 says priority should go to these job types:
Jobs with the highest injury or illness rates .
Jobs with the potential to cause severe or disabling injuries or illness , even if there is no history of previous accidents.
Jobs where one simple human error could cause a severe injury.
New jobs , and jobs that have changed in process, equipment, or materials.
Complex jobs that require written instructions.
On a construction site, the Fatal Four hazards are a practical place to start.
A scenario question may describe four tasks and ask which to analyze first; choose the one with the greatest combination of severity and likelihood – usually the fall or trenching task.
Risk Assessment and the Risk Matrix
Risk assessment turns a list of hazards into a ranked list of priorities. The core relationship:
Risk = Severity × Probability
Severity is how badly someone could be hurt (first aid → recordable → lost time → fatality). Probability is how likely the exposure is to cause harm. A risk matrix plots these on a grid – commonly a 5×5 – and produces a Risk Priority Number or a color band (green/low, yellow/moderate, red/high). High-risk cells must be controlled before work proceeds.
Key exam points:
A low-probability but catastrophic hazard (e.g., trench collapse) still rates as high risk because severity is extreme – do not dismiss it as "rare."
Reducing risk means starting at the top of the hierarchy of controls; residual risk is what remains after controls are applied.
As Low As Reasonably Practicable (ALARP) describes driving residual risk to the lowest feasible level, not necessarily zero.
Putting It on the Jobsite
The JHA is not a binder document – it drives the daily toolbox talk (also called a tailgate or safety briefing). Each morning the supervisor reviews the JHA for that day's specific work, confirms the controls are in place, and verifies workers understand their roles. Worker involvement makes this pre-task planning stick.
Common mistakes:
Treating the JHA as a one-time document instead of a living tool revised after change or incident.
Writing controls that simply restate "be careful" rather than naming a specific engineering or administrative control.
Skipping worker input, which yields hazards that look complete on paper but miss field reality.
Confusing the JHA (a planning tool) with an incident investigation (a reactive, root-cause tool used after something happens).
JHA, AHA, and the Federal Distinction
On most private jobs the term JHA or JSA is used and the document is informal but written. Where a contract or owner requires a named activity-level form, follow that document; the method is the same – step, hazard, control.
You may see any of the three names, so do not be thrown by an unfamiliar acronym; the underlying logic never changes.
Connecting the JHA to Daily Field Tools
The JHA is the parent document; several field tools flow from it. A toolbox talk (tailgate meeting) delivers the JHA content verbally each morning. A pre-task plan or safe task analysis card is the worker-level version a crew fills out at the workface. Stop Work Authority is the backstop: if conditions on the ground no longer match the JHA – a soil change, a weather change, an undocumented utility – any worker can stop the task until the JHA is revisited.
Treating these as a connected system, rather than separate paperwork, is the supervisory mindset to build: plan the work, then work the plan, and re-plan the moment reality changes.