Study guide

7.1 Polynomial Operations: Addition, Subtraction, & Multiplication

TABE Mathematics Exam

Track your progress as you read

Finished sections get a check mark.

1 Exam Structure, Administration, Locator & NRS Scoring

1.1 TABE 13&14 Mathematics: Levels, Structure, & Administration 1.2 Scale Scores, NRS Levels, Out-of-Range Flags, & Measurable Skills Gains

2 Chapter 2: Number Operations in Base Ten & Number Systems

2.1 Whole Number Place Value, Multi-Digit Arithmetic, & Estimation 2.2 Decimal Operations, Place Value, & Practical Applications 2.3 Factors, Multiples, Divisibility Rules, & Prime Factorization 2.4 Meanings of Multiplication and Division: Equal Groups, Arrays, & Multiplicative Comparison 2.5 One-Step and Two-Step Word Problems with Unknown Quantities

3 Chapter 3: Fractions, Rational Numbers, & Signed Integers

3.1 Fraction Fundamentals, Equivalence, & Mixed Numbers 3.2 Fraction Arithmetic: Adding, Subtracting, Multiplying, & Dividing 3.3 Integers, Absolute Value, & Signed Rational Number Operations 3.4 Fraction Multiplication as Scaling, Unit-Fraction Division, & Fractions in Measurement

4 Chapter 4: Ratios, Proportions, & Percents

4.1 Ratios, Rates, Unit Rates, & Proportional Relationships 4.2 Percents: Triad Conversions, Percent Equations, & Base Calculations 4.3 Real-World Percent Applications: Tax, Discounts, Markups, Interest, & Percent Change 4.4 Ratio Reasoning with Tables, Tape Diagrams, & Double Number Lines

5 Chapter 5: Expressions and Algebraic Thinking

5.1 Arithmetic Patterns, Variables, & Translating Algebraic Expressions 5.2 Evaluating Expressions, Order of Operations, & Properties of Operations 5.3 Exponents, Square & Cube Roots, Radicals, & Scientific Notation 5.4 Independent and Dependent Variables, Tables, & Two-Quantity Relationships 5.5 Equivalent Expressions, Expression Structure, & Justifying Every Step 5.6 Radicals, Rational Exponents, & Approximating Irrational Numbers

6 Chapter 6: Equations and Inequalities

6.1 Solving One-Step & Two-Step Linear Equations 6.2 Multi-Step Equations, Variables on Both Sides, & Special Solution Sets 6.3 Linear Inequalities: Solving, Graphing on Number Lines, & Word Problems 6.4 Systems of Linear Equations: Graphing, Substitution, & Elimination Methods 6.5 Literal Equations & Rearranging Formulas 6.6 Creating Equations, Inequalities, & Constraint Models

7 Chapter 7: Advanced Algebra & Quadratic Equations

7.1 Polynomial Operations: Addition, Subtraction, & Multiplication 7.2 Factoring Polynomials & Solving Quadratic Equations by Factoring 7.3 The Quadratic Formula, Completing the Square, & Graphs of Quadratics

8 Chapter 8: Functions & Mathematical Modeling

8.1 Function Fundamentals, Notation, Domain, & Range 8.2 Linear Functions: Slope, Rate of Change, & Linear Equations 8.3 Exponential Growth & Decay Models, & Comparing Function Families 8.4 Building Functions & Interpreting Parameters in Context 8.5 Average Rate of Change, Qualitative Graphs, & Comparing Representations

9 Chapter 9: Measurement, Unit Conversions, & Statistical Displays

9.1 Customary & Metric Unit Conversions and Dimensional Analysis 9.2 Frequency Tables, Bar Graphs, Line Graphs, & Histograms 9.3 Measures of Central Tendency & Statistical Dispersion 9.4 Five-Number Summaries, Box Plots, & Bivariate Scatter Plots 9.5 Telling Time, Elapsed Time, & Money Calculations 9.6 Measuring and Estimating Length, Mass, & Liquid Volume 9.7 Line Plots, Dot Plots, & Picture Graphs 9.8 Units, Quantities, Precision, & Appropriate Accuracy

10 Chapter 10: Probability & Statistical Inferences

10.1 Theoretical vs. Experimental Probability, Sample Spaces, & Single-Event Outcomes 10.2 Compound Probability: Independent Events, Dependent Events, & Addition Rules 10.3 Sampling Techniques, Bias, & Making Population Inferences 10.4 Statistical Questions, Variability, & Describing Distributions 10.5 Probability Models, Relative Frequency, & Simulation

11 Chapter 11: Two-Dimensional Geometry & Spatial Reasoning

11.1 Geometric Fundamentals: Points, Lines, Angles, Angle Relationships, & Polygons 11.2 Perimeter of Polygons, Circle Anatomy, & Circumference Calculations 11.3 Area Formulas & Area of Composite Figures 11.4 Angle Measurement, Protractors, & Angle Addition 11.5 Classifying Two-Dimensional Figures & Partitioning Shapes into Equal Parts 11.6 Area by Tiling, Unit Squares, & the Distributive Property of Area

12 Chapter 12: Three-Dimensional Geometry, Coordinate Geometry, & Right Triangles

12.1 Volume and Surface Area of 3D Solids 12.2 Coordinate Geometry: Distance, Midpoint, & Geometric Transformations 12.3 The Pythagorean Theorem, Geometric Similarity, & Indirect Measurement 12.4 Volume by Unit Cubes & Additive Volume of Composite Solids 12.5 The Coordinate Plane: Plotting Points, Quadrants, & Polygons on the Grid 12.6 Density & Geometric Modeling

7.1 Polynomial Operations: Addition, Subtraction, & Multiplication

Key Takeaways Explain This Topic AI

Polynomials are algebraic expressions combining constants, variables, and non-negative integer exponents, classified by term count (monomial, binomial, trinomial) and degree (the highest exponent sum in a term).

Writing polynomials in standard form arranges terms in descending order of exponent degree, establishing the leading term and leading coefficient at the front.

Adding and subtracting polynomials relies on combining like terms (identical variables and powers); polynomial subtraction strictly requires distributing a factor of -1 to every term inside the subtracted expression before combining.

Multiplying polynomials applies the exponent product rule ( x a ⋅ x b = x a + b x^a \cdot x^b = x^{a+b} x a ⋅ x b = x a + b ), employing FOIL or the geometric area model for binomials, special product identities (Difference of Squares and Perfect Square Trinomials), and multi-term distribution.

Last updated: August 2026

7.1 Polynomial Operations: Addition, Subtraction, & Multiplication

Polynomials serve as the fundamental language for modeling non-linear relationships across algebra, physics, geometry, and workplace mathematics. On TABE 13&14 Mathematics Levels D and A, mastering polynomial operations—classifying expressions, adding, subtracting, and expanding multi-term products—is essential for solving complex algebraic equations and evaluating real-world geometric and physical models.

1. Polynomial Anatomy, Terminology, & Standard Form

A polynomial is an algebraic expression consisting of one or more terms added or subtracted together, where each term is a constant, a variable, or the product of a numerical coefficient and one or more variables raised strictly to whole-number (non-negative integer) exponents ( 0 , 1 , 2 , 3 , … 0, 1, 2, 3, \dots 0 , 1 , 2 , 3 , … ). 4 x 3 ⏟ Cubic Term − 7 x 2 ⏟ Quadratic Term + 5 x ⏟ Linear Term − 9 ⏟ Constant Term \underbrace{4x^3}_{\text{Cubic Term}} - \underbrace{7x^2}_{\text{Quadratic Term}} + \underbrace{5x}_{\text{Linear Term}} - \underbrace{9}_{\text{Constant Term}} Cubic Term 4 x 3 ​ ​ − Quadratic Term 7 x 2 ​ ​ + Linear Term 5 x ​ ​ − Constant Term 9 ​ ​

Essential Polynomial Definitions

Term: A single number, variable, or product of numbers and variables separated by + + + or − - − signs.

Coefficient: The numerical multiplier of a variable term (in − 7 x 2 -7x^2 − 7 x 2 , the coefficient is − 7 -7 − 7 ).

Constant: A term containing no variable (its degree is 0 0 0 , such as − 9 -9 − 9 ).

Degree of a Term: The sum of the exponents of all variables in that specific term (e.g., 5 x 3 5x^3 5 x 3 has degree 3 3 3 ; 4 x 2 y 3 4x^2y^3 4 x 2 y 3 has degree 2 + 3 = 5 2 + 3 = 5 2 + 3 = 5 ; the constant 8 8 8 has degree 0 0 0 ).

Degree of a Polynomial: The highest degree among all of its non-zero individual terms.

Non-Polynomial Expressions to Recognize

An algebraic expression is NOT a polynomial if it contains:

Negative exponents: 3 x − 2 = 3 x 2 3x^{-2} = \frac{3}{x^2} 3 x − 2 = x 2 3 ​ (violates non-negative integer requirement).

Fractional exponents / Radicals on variables: 4 x 1 / 2 = 4 x 4x^{1/2} = 4\sqrt{x} 4 x 1/2 = 4 x ​ .

Variables in denominators: 5 x + 1 \frac{5}{x + 1} x + 1 5 ​ .

Classification by Number of Terms & Degree

  • Classification by Terms Number of Terms Example Degree Name Degree Value Example Standard Form
  • Monomial 1 7 x 4 7x^4 7 x 4 Constant 0 8 8 8
  • Binomial 2 3 x 2 − 5 3x^2 - 5 3 x 2 − 5 Linear 1 4 x − 7 4x - 7 4 x − 7

Trinomial 3 2 x 2 + 5 x − 4 2x^2 + 5x - 4 2 x 2 + 5 x − 4 Quadratic 2 3 x 2 + 2 x − 5 3x^2 + 2x - 5 3 x 2 + 2 x − 5

Polynomial 4+ x 4 − 2 x 3 + 5 x − 1 x^4 - 2x^3 + 5x - 1 x 4 − 2 x 3 + 5 x − 1 Cubic / Quartic 3 / 4 2 x 3 − x 2 + 6 x − 9 2x^3 - x^2 + 6x - 9 2 x 3 − x 2 + 6 x − 9

Standard Form of a Polynomial

A polynomial in one variable is written in standard form when its terms are arranged in strictly descending order of exponent degree (from highest exponent to lowest exponent): P ( x ) = a n x n + a n − 1 x n − 1 + ⋯ + a 1 x + a 0 ( a n ≠ 0 ) P(x) = a_n x^n + a_{n-1} x^{n-1} + \dots + a_1 x + a_0 \quad (a_n \neq 0) P ( x ) = a n ​ x n + a n − 1 ​ x n − 1 + ⋯ + a 1 ​ x + a 0 ​ ( a n ​  = 0 )

Leading Term: The term with the highest degree ( a n x n a_n x^n a n ​ x n ).

Leading Coefficient: The coefficient of the leading term ( a n a_n a n ​ ).

Example: Rewrite 7 x − 4 x 3 + 8 + 5 x 2 7x - 4x^3 + 8 + 5x^2 7 x − 4 x 3 + 8 + 5 x 2 in standard form.

Standard Form: − 4 x 3 + 5 x 2 + 7 x + 8 -4x^3 + 5x^2 + 7x + 8 − 4 x 3 + 5 x 2 + 7 x + 8

Degree: 3 3 3 (Cubic) ; Leading Term: − 4 x 3 -4x^3 − 4 x 3 ; Leading Coefficient: − 4 -4 − 4 ; Constant: 8 8 8 .

2. Adding and Subtracting Polynomials

Adding and subtracting polynomials is rooted in identifying and combining like terms —terms that contain identical variable bases raised to identical exponential powers. When combining like terms, add or subtract the numerical coefficients while keeping the variable base and exponent unchanged ( 3 x 2 + 5 x 2 = 8 x 2 3x^2 + 5x^2 = 8x^2 3 x 2 + 5 x 2 = 8 x 2 , not 8 x 4 8x^4 8 x 4 ).

Addition of Polynomials

Polynomial addition can be performed using either the horizontal grouping method or the vertical column alignment method.

Worked Example (Horizontal Method): ( 5 x 3 − 4 x 2 + 7 x − 3 ) + ( 2 x 3 + 6 x 2 − 9 x + 11 ) (5x^3 - 4x^2 + 7x - 3) + (2x^3 + 6x^2 - 9x + 11) ( 5 x 3 − 4 x 2 + 7 x − 3 ) + ( 2 x 3 + 6 x 2 − 9 x + 11 ) Group Like Terms: ( 5 x 3 + 2 x 3 ) + ( − 4 x 2 + 6 x 2 ) + ( 7 x − 9 x ) + ( − 3 + 11 ) Combine Coefficients: ( 5 + 2 ) x 3 + ( − 4 + 6 ) x 2 + ( 7 − 9 ) x + ( − 3 + 11 ) Final Standard Form: 7 x 3 + 2 x 2 − 2 x + 8 \begin{aligned}

  • \text{Group Like Terms:} &\quad (5x^3 + 2x^3) + (-4x^2 + 6x^2) + (7x - 9x) + (-3 + 11) \\
  • \text{Combine Coefficients:} &\quad (5+2)x^3 + (-4+6)x^2 + (7-9)x + (-3+11) \\
  • \text{Final Standard Form:} &\quad 7x^3 + 2x^2 - 2x + 8

\end{aligned} Group Like Terms: Combine Coefficients: Final Standard Form: ​ ( 5 x 3 + 2 x 3 ) + ( − 4 x 2 + 6 x 2 ) + ( 7 x − 9 x ) + ( − 3 + 11 ) ( 5 + 2 ) x 3 + ( − 4 + 6 ) x 2 + ( 7 − 9 ) x + ( − 3 + 11 ) 7 x 3 + 2 x 2 − 2 x + 8 ​

Subtraction of Polynomials & The Negative Distribution Rule

Caution

THE SUBTRACTION DISTRIBUTION TRAP: Subtracting a polynomial requires subtracting every single term inside the parentheses. You must distribute a factor of − 1 -1 − 1 to each term in the subtrahend, inverting all internal signs, before combining like terms: ( A ) − ( B + C − D ) = A − B − C + D (A) - (B + C - D) = A - B - C + D ( A ) − ( B + C − D ) = A − B − C + D

Worked Example (Vertical Column Method): Subtract ( 3 x 3 − 8 x 2 + 4 x − 6 ) (3x^3 - 8x^2 + 4x - 6) ( 3 x 3 − 8 x 2 + 4 x − 6 ) from ( 7 x 3 − 2 x 2 − 5 x + 9 ) (7x^3 - 2x^2 - 5x + 9) ( 7 x 3 − 2 x 2 − 5 x + 9 ) . Set up subtraction: ( 7 x 3 − 2 x 2 − 5 x + 9 ) − ( 3 x 3 − 8 x 2 + 4 x − 6 ) Distribute − 1 : ( 7 x 3 − 2 x 2 − 5 x + 9 ) + ( − 3 x 3 + 8 x 2 − 4 x + 6 ) \begin{aligned}

  • \text{Set up subtraction:} &\quad (7x^3 - 2x^2 - 5x + 9) - (3x^3 - 8x^2 + 4x - 6) \\
  • \text{Distribute } -1: &\quad (7x^3 - 2x^2 - 5x + 9) + (-3x^3 + 8x^2 - 4x + 6)

\end{aligned} Set up subtraction: Distribute − 1 : ​ ( 7 x 3 − 2 x 2 − 5 x + 9 ) − ( 3 x 3 − 8 x 2 + 4 x − 6 ) ( 7 x 3 − 2 x 2 − 5 x + 9 ) + ( − 3 x 3 + 8 x 2 − 4 x + 6 ) ​ Vertical Alignment:

  • 7x^3 - 2x^2 - 5x + 9
  • + -3x^3 + 8x^2 - 4x + 6
  • ───────────────────────
  • 4x^3 + 6x^2 - 9x + 15
  • 3. Multiplying Monomials and Polynomials

Multiplying polynomial terms requires applying the Product Rule of Exponents : x a ⋅ x b = x a + b x^a \cdot x^b = x^{a+b} x a ⋅ x b = x a + b

When multiplying monomials, multiply the numerical coefficients together and add the exponents of identical variable bases.

Monomial by Monomial Multiplication

Example 1: ( 4 x 3 ) ⋅ ( − 3 x 5 ) = ( 4 ⋅ − 3 ) ( x 3 + 5 ) = − 12 x 8 (4x^3) \cdot (-3x^5) = (4 \cdot -3)(x^{3+5}) = -12x^8 ( 4 x 3 ) ⋅ ( − 3 x 5 ) = ( 4 ⋅ − 3 ) ( x 3 + 5 ) = − 12 x 8

Example 2: ( − 2 x 2 y 4 ) ⋅ ( 7 x 3 y ) = ( − 2 ⋅ 7 ) ( x 2 + 3 ) ( y 4 + 1 ) = − 14 x 5 y 5 (-2x^2y^4) \cdot (7x^3y) = (-2 \cdot 7)(x^{2+3})(y^{4+1}) = -14x^5y^5 ( − 2 x 2 y 4 ) ⋅ ( 7 x 3 y ) = ( − 2 ⋅ 7 ) ( x 2 + 3 ) ( y 4 + 1 ) = − 14 x 5 y 5

Monomial by Polynomial (Distributive Property)

To multiply a single monomial by a polynomial, distribute the monomial to every term inside the grouping symbol: a ( b + c + d ) = a b + a c + a d a(b + c + d) = ab + ac + ad a ( b + c + d ) = ab + a c + a d

Worked Example: Simplify − 3 x 2 ( 4 x 3 − 5 x 2 + 2 x − 7 ) -3x^2(4x^3 - 5x^2 + 2x - 7) − 3 x 2 ( 4 x 3 − 5 x 2 + 2 x − 7 ) . = ( − 3 x 2 ) ( 4 x 3 ) + ( − 3 x 2 ) ( − 5 x 2 ) + ( − 3 x 2 ) ( 2 x ) + ( − 3 x 2 ) ( − 7 ) = − 12 x 2 + 3 + 15 x 2 + 2 − 6 x 2 + 1 + 21 x 2 = − 12 x 5 + 15 x 4 − 6 x 3 + 21 x 2 \begin{aligned}

  • &= (-3x^2)(4x^3) + (-3x^2)(-5x^2) + (-3x^2)(2x) + (-3x^2)(-7) \\
  • &= -12x^{2+3} + 15x^{2+2} - 6x^{2+1} + 21x^2 \\
  • &= -12x^5 + 15x^4 - 6x^3 + 21x^2

\end{aligned} ​ = ( − 3 x 2 ) ( 4 x 3 ) + ( − 3 x 2 ) ( − 5 x 2 ) + ( − 3 x 2 ) ( 2 x ) + ( − 3 x 2 ) ( − 7 ) = − 12 x 2 + 3 + 15 x 2 + 2 − 6 x 2 + 1 + 21 x 2 = − 12 x 5 + 15 x 4 − 6 x 3 + 21 x 2 ​

4. Multiplying Two Binomials: The FOIL Method & The Area Model

When multiplying two binomials ( a + b ) ( c + d ) (a + b)(c + d) ( a + b ) ( c + d ) , every term in the first binomial must multiply every term in the second binomial. This produces four individual products remembered by the mnemonic FOIL : F (First) ───────> a * c

  • ┌────────────────┐
  • (a + b) (c + d) ───> O (Outside) ──> a * d
  • └────┬───┘ ───> I (Inside) ──> b * c
  • L (Last) ───> b * d

F (First): Multiply the first terms in each set of parentheses ( a ⋅ c a \cdot c a ⋅ c ).

O (Outside): Multiply the outermost terms ( a ⋅ d a \cdot d a ⋅ d ).

I (Inside): Multiply the innermost terms ( b ⋅ c b \cdot c b ⋅ c ).

L (Last): Multiply the last terms in each set of parentheses ( b ⋅ d b \cdot d b ⋅ d ).

Worked Example: Expand ( 3 x + 4 ) ( 2 x − 5 ) (3x + 4)(2x - 5) ( 3 x + 4 ) ( 2 x − 5 ) .

  • F: ( 3 x ) ( 2 x ) = 6 x 2 (3x)(2x) = 6x^2 ( 3 x ) ( 2 x ) = 6 x 2
  • O: ( 3 x ) ( − 5 ) = − 15 x (3x)(-5) = -15x ( 3 x ) ( − 5 ) = − 15 x
  • I: ( 4 ) ( 2 x ) = + 8 x (4)(2x) = +8x ( 4 ) ( 2 x ) = + 8 x
  • L: ( 4 ) ( − 5 ) = − 20 (4)(-5) = -20 ( 4 ) ( − 5 ) = − 20

Combine Like Middle Terms: 6 x 2 + ( − 15 x + 8 x ) − 20 = 6 x 2 − 7 x − 20 6x^2 + (-15x + 8x) - 20 = \mathbf{6x^2 - 7x - 20} 6 x 2 + ( − 15 x + 8 x ) − 20 = 6 x 2 − 7x − 20

The Geometric Area Model (Box Method)

The area of a rectangle with side lengths ( 3 x + 4 ) (3x + 4) ( 3 x + 4 ) and ( 2 x − 5 ) (2x - 5) ( 2 x − 5 ) equals the sum of its four interior sub-areas: 3x +4

  • ┌────────────┬────────────┐
  • 2x │ 6x^2 │ +8x │ --> 6x^2 + 8x
  • ├────────────┼────────────┤
  • 5 │ -15x │ -20 │ --> -15x - 20
  • └────────────┴────────────┘
  • Total Sum = 6x^2 + (-15x + 8x) - 20 = 6x^2 - 7x - 20
  • 5. Special Binomial Products & Patterns

Recognizing algebraic shortcuts for recurring binomial products saves valuable calculation time on the TABE:

1. Difference of Two Squares Pattern: ( a + b ) ( a − b ) = a 2 − b 2 (a + b)(a - b) = a^2 - b^2 ( a + b ) ( a − b ) = a 2 − b 2

When multiplying the sum and difference of the exact same two terms, the outer and inner FOIL products are additive opposites ( + a b − a b = 0 +ab - ab = 0 + ab − ab = 0 ) and cancel out completely: ( a + b ) ( a − b ) = a 2 − a b + b a − b 2 = a 2 − b 2 (a + b)(a - b) = a^2 - ab + ba - b^2 = a^2 - b^2 ( a + b ) ( a − b ) = a 2 − ab + ba − b 2 = a 2 − b 2

Example: ( 4 x + 7 ) ( 4 x − 7 ) = ( 4 x ) 2 − ( 7 ) 2 = 16 x 2 − 49 (4x + 7)(4x - 7) = (4x)^2 - (7)^2 = \mathbf{16x^2 - 49} ( 4 x + 7 ) ( 4 x − 7 ) = ( 4 x ) 2 − ( 7 ) 2 = 16 x 2 − 49

2. Perfect Square Trinomial Patterns: ( a ± b ) 2 = a 2 ± 2 a b + b 2 (a \pm b)^2 = a^2 \pm 2ab + b^2 ( a ± b ) 2 = a 2 ± 2 ab + b 2

Squaring a binomial produces a trinomial containing three distinct parts: the square of the first term, twice the product of both terms, and the square of the last term. ( a + b ) 2 = ( a + b ) ( a + b ) = a 2 + 2 a b + b 2 (a + b)^2 = (a + b)(a + b) = a^2 + 2ab + b^2 ( a + b ) 2 = ( a + b ) ( a + b ) = a 2 + 2 ab + b 2 ( a − b ) 2 = ( a − b ) ( a − b ) = a 2 − 2 a b + b 2 (a - b)^2 = (a - b)(a - b) = a^2 - 2ab + b^2 ( a − b ) 2 = ( a − b ) ( a − b ) = a 2 − 2 ab + b 2

Caution

The Exponent Distribution Fallacy: ( a + b ) 2 ≠ a 2 + b 2 (a + b)^2 \neq a^2 + b^2 ( a + b ) 2  = a 2 + b 2 . You cannot distribute an exponent over addition or subtraction. The middle term ± 2 a b \pm 2ab ± 2 ab must never be omitted!

Worked Example: Expand ( 3 x − 5 ) 2 (3x - 5)^2 ( 3 x − 5 ) 2 . a = 3 x , b = 5 a = 3x, \quad b = 5 a = 3 x , b = 5 ( 3 x ) 2 − 2 ( 3 x ) ( 5 ) + ( 5 ) 2 = 9 x 2 − 30 x + 25 (3x)^2 - 2(3x)(5) + (5)^2 = \mathbf{9x^2 - 30x + 25} ( 3 x ) 2 − 2 ( 3 x ) ( 5 ) + ( 5 ) 2 = 9 x 2 − 30x + 25

6. Multiplying a Binomial by a Trinomial

To multiply polynomials of higher degree, distribute each term of the smaller polynomial across every term of the larger polynomial, producing a total of 2 × 3 = 6 2 \times 3 = 6 2 × 3 = 6 partial products before combining like terms.

Worked Example: Expand ( 2 x − 3 ) ( x 2 + 4 x − 5 ) (2x - 3)(x^2 + 4x - 5) ( 2 x − 3 ) ( x 2 + 4 x − 5 ) . Distribute 2 x : 2 x ( x 2 + 4 x − 5 ) = 2 x 3 + 8 x 2 − 10 x Distribute − 3 : − 3 ( x 2 + 4 x − 5 ) = − 3 x 2 − 12 x + 15 Align and Combine: 2 x 3 + ( 8 x 2 − 3 x 2 ) + ( − 10 x − 12 x ) + 15 Final Standard Form: 2 x 3 + 5 x 2 − 22 x + 15 \begin{aligned}

  • \text{Distribute } 2x: &\quad 2x(x^2 + 4x - 5) = 2x^3 + 8x^2 - 10x \\
  • \text{Distribute } -3: &\quad -3(x^2 + 4x - 5) = -3x^2 - 12x + 15 \\
  • \text{Align and Combine:} &\quad 2x^3 + (8x^2 - 3x^2) + (-10x - 12x) + 15 \\
  • \text{Final Standard Form:} &\quad \mathbf{2x^3 + 5x^2 - 22x + 15}

\end{aligned} Distribute 2 x : Distribute − 3 : Align and Combine: Final Standard Form: ​ 2 x ( x 2 + 4 x − 5 ) = 2 x 3 + 8 x 2 − 10 x − 3 ( x 2 + 4 x − 5 ) = − 3 x 2 − 12 x + 15 2 x 3 + ( 8 x 2 − 3 x 2 ) + ( − 10 x − 12 x ) + 15 2 x 3 + 5 x 2 − 22x + 15 ​

Applied Geometric Problem: Storage Facility Expansion

A logistics company has a rectangular warehouse whose width is modeled by ( 2 x + 3 ) meters (2x + 3)\text{ meters} ( 2 x + 3 ) meters and whose length is modeled by ( 4 x + 5 ) meters (4x + 5)\text{ meters} ( 4 x + 5 ) meters . Find the algebraic polynomial representing the total floor area A ( x ) A(x) A ( x ) . Area = Width × Length = ( 2 x + 3 ) ( 4 x + 5 ) = ( 2 x ) ( 4 x ) + ( 2 x ) ( 5 ) + ( 3 ) ( 4 x ) + ( 3 ) ( 5 ) = 8 x 2 + 10 x + 12 x + 15 = ( 8 x 2 + 22 x + 15 ) square meters \begin{aligned}

  • \text{Area} &= \text{Width} \times \text{Length} = (2x + 3)(4x + 5) \\
  • &= (2x)(4x) + (2x)(5) + (3)(4x) + (3)(5) \\
  • &= 8x^2 + 10x + 12x + 15 = \mathbf{(8x^2 + 22x + 15) \text{ square meters}}

\end{aligned} Area ​ = Width × Length = ( 2 x + 3 ) ( 4 x + 5 ) = ( 2 x ) ( 4 x ) + ( 2 x ) ( 5 ) + ( 3 ) ( 4 x ) + ( 3 ) ( 5 ) = 8 x 2 + 10 x + 12 x + 15 = ( 8 x 2 + 22x + 15 ) square meters ​

Loading diagram... Master Polynomial Operations Decision Tree