Study guide

6.6 Creating Equations, Inequalities, & Constraint Models

TABE Mathematics Exam

Track your progress as you read

Finished sections get a check mark.

1 Exam Structure, Administration, Locator & NRS Scoring

1.1 TABE 13&14 Mathematics: Levels, Structure, & Administration 1.2 Scale Scores, NRS Levels, Out-of-Range Flags, & Measurable Skills Gains

2 Chapter 2: Number Operations in Base Ten & Number Systems

2.1 Whole Number Place Value, Multi-Digit Arithmetic, & Estimation 2.2 Decimal Operations, Place Value, & Practical Applications 2.3 Factors, Multiples, Divisibility Rules, & Prime Factorization 2.4 Meanings of Multiplication and Division: Equal Groups, Arrays, & Multiplicative Comparison 2.5 One-Step and Two-Step Word Problems with Unknown Quantities

3 Chapter 3: Fractions, Rational Numbers, & Signed Integers

3.1 Fraction Fundamentals, Equivalence, & Mixed Numbers 3.2 Fraction Arithmetic: Adding, Subtracting, Multiplying, & Dividing 3.3 Integers, Absolute Value, & Signed Rational Number Operations 3.4 Fraction Multiplication as Scaling, Unit-Fraction Division, & Fractions in Measurement

4 Chapter 4: Ratios, Proportions, & Percents

4.1 Ratios, Rates, Unit Rates, & Proportional Relationships 4.2 Percents: Triad Conversions, Percent Equations, & Base Calculations 4.3 Real-World Percent Applications: Tax, Discounts, Markups, Interest, & Percent Change 4.4 Ratio Reasoning with Tables, Tape Diagrams, & Double Number Lines

5 Chapter 5: Expressions and Algebraic Thinking

5.1 Arithmetic Patterns, Variables, & Translating Algebraic Expressions 5.2 Evaluating Expressions, Order of Operations, & Properties of Operations 5.3 Exponents, Square & Cube Roots, Radicals, & Scientific Notation 5.4 Independent and Dependent Variables, Tables, & Two-Quantity Relationships 5.5 Equivalent Expressions, Expression Structure, & Justifying Every Step 5.6 Radicals, Rational Exponents, & Approximating Irrational Numbers

6 Chapter 6: Equations and Inequalities

6.1 Solving One-Step & Two-Step Linear Equations 6.2 Multi-Step Equations, Variables on Both Sides, & Special Solution Sets 6.3 Linear Inequalities: Solving, Graphing on Number Lines, & Word Problems 6.4 Systems of Linear Equations: Graphing, Substitution, & Elimination Methods 6.5 Literal Equations & Rearranging Formulas 6.6 Creating Equations, Inequalities, & Constraint Models

7 Chapter 7: Advanced Algebra & Quadratic Equations

7.1 Polynomial Operations: Addition, Subtraction, & Multiplication 7.2 Factoring Polynomials & Solving Quadratic Equations by Factoring 7.3 The Quadratic Formula, Completing the Square, & Graphs of Quadratics

8 Chapter 8: Functions & Mathematical Modeling

8.1 Function Fundamentals, Notation, Domain, & Range 8.2 Linear Functions: Slope, Rate of Change, & Linear Equations 8.3 Exponential Growth & Decay Models, & Comparing Function Families 8.4 Building Functions & Interpreting Parameters in Context 8.5 Average Rate of Change, Qualitative Graphs, & Comparing Representations

9 Chapter 9: Measurement, Unit Conversions, & Statistical Displays

9.1 Customary & Metric Unit Conversions and Dimensional Analysis 9.2 Frequency Tables, Bar Graphs, Line Graphs, & Histograms 9.3 Measures of Central Tendency & Statistical Dispersion 9.4 Five-Number Summaries, Box Plots, & Bivariate Scatter Plots 9.5 Telling Time, Elapsed Time, & Money Calculations 9.6 Measuring and Estimating Length, Mass, & Liquid Volume 9.7 Line Plots, Dot Plots, & Picture Graphs 9.8 Units, Quantities, Precision, & Appropriate Accuracy

10 Chapter 10: Probability & Statistical Inferences

10.1 Theoretical vs. Experimental Probability, Sample Spaces, & Single-Event Outcomes 10.2 Compound Probability: Independent Events, Dependent Events, & Addition Rules 10.3 Sampling Techniques, Bias, & Making Population Inferences 10.4 Statistical Questions, Variability, & Describing Distributions 10.5 Probability Models, Relative Frequency, & Simulation

11 Chapter 11: Two-Dimensional Geometry & Spatial Reasoning

11.1 Geometric Fundamentals: Points, Lines, Angles, Angle Relationships, & Polygons 11.2 Perimeter of Polygons, Circle Anatomy, & Circumference Calculations 11.3 Area Formulas & Area of Composite Figures 11.4 Angle Measurement, Protractors, & Angle Addition 11.5 Classifying Two-Dimensional Figures & Partitioning Shapes into Equal Parts 11.6 Area by Tiling, Unit Squares, & the Distributive Property of Area

12 Chapter 12: Three-Dimensional Geometry, Coordinate Geometry, & Right Triangles

12.1 Volume and Surface Area of 3D Solids 12.2 Coordinate Geometry: Distance, Midpoint, & Geometric Transformations 12.3 The Pythagorean Theorem, Geometric Similarity, & Indirect Measurement 12.4 Volume by Unit Cubes & Additive Volume of Composite Solids 12.5 The Coordinate Plane: Plotting Points, Quadrants, & Polygons on the Grid 12.6 Density & Geometric Modeling

6.6 Creating Equations, Inequalities, & Constraint Models

Key Takeaways Explain This Topic AI

Creating an equation in one variable starts by naming the unknown in words, then translating each sentence of the problem into one algebraic statement.

Creating an equation in two variables produces a graph, and the axes must be labeled with the quantity and its unit and scaled to the data.

Constraints in a modeling problem become inequalities or a system of inequalities, and the solution region is the overlap of all of them.

A mathematically correct solution can still be non-viable in context — negative hours, fractional people, or a value beyond a stated budget must be rejected.

Last updated: August 2026

Creating Equations, Inequalities, & Constraint Models

Solving an equation is mechanical. Writing the equation is where the points are, and Level A tests it as a distinct skill across three standards: create equations and inequalities in one variable; create equations in two or more variables and graph them "on coordinate axes with labels and scales"; and represent constraints by equations, inequalities, or systems, "interpreting solutions as viable or non-viable options in a modeling context."

Part 1: One-Variable Equations and Inequalities

The reliable procedure is four steps, and skipping step 1 is what causes most errors.

Define the variable in words. "Let h h h = the number of hours of labor." Not just "let x = hours" — write the unit.

Translate one sentence at a time.

Solve.

Answer the question that was asked , which is often not the variable you solved for.

Problem. A repair shop charges a $65 diagnostic fee plus $95 per hour. A customer's total bill was $445. How long did the repair take?

  • Sentence Algebra
  • Let h h h = hours of labor h h h
  • $95 per hour 95 h 95h 95 h
  • plus a $65 fee 95 h + 65 95h + 65 95 h + 65

total bill was $445 95 h + 65 = 445 95h + 65 = 445 95 h + 65 = 445 95 h = 380 ⇒ h = 4 hours 95h = 380 \;\Rightarrow\; h = \mathbf{4 \text{ hours}} 95 h = 380 ⇒ h = 4 hours

The same problem as an inequality

The customer can spend at most $445. What is the greatest number of hours she can afford? 95 h + 65 ≤ 445 ⇒ 95 h ≤ 380 ⇒ h ≤ 4 95h + 65 \le 445 \;\Rightarrow\; 95h \le 380 \;\Rightarrow\; h \le 4 95 h + 65 ≤ 445 ⇒ 95 h ≤ 380 ⇒ h ≤ 4

Translate the boundary language carefully — this is a scored distinction:

  • Phrase Symbol
  • at most, no more than, maximum, up to ≤ \le ≤
  • at least, no less than, minimum ≥ \ge ≥
  • more than, exceeds, over > > >
  • less than, under, below < < <
  • Part 2: Two-Variable Equations and Their Graphs

When two quantities vary together, the model is a two-variable equation and the answer is a graph , not a number.

A landscaping crew charges $40 per lawn and $25 per hedge. Write an equation for the revenue R R R from ℓ \ell ℓ lawns and h h h hedges. R = 40 ℓ + 25 h R = 40\ell + 25h R = 40 ℓ + 25 h

If total revenue is fixed at $400, the equation 40 ℓ + 25 h = 400 40\ell + 25h = 400 40 ℓ + 25 h = 400 describes every combination that produces that revenue, and its graph is a line segment.

Graphing with labels and scales

The standard explicitly requires labels and scales, and TABE items ask about them:

Label each axis with the quantity and its unit — "Lawns mowed," "Revenue (dollars)" — not just "x" and "y."

Choose a scale that fits the data. If revenue runs to $400, tick every $50, not every $1.

Start at a sensible origin. For counts of jobs, both axes begin at 0.

Plot the intercepts first. Setting h = 0 h = 0 h = 0 gives ℓ = 10 \ell = 10 ℓ = 10 ; setting ℓ = 0 \ell = 0 ℓ = 0 gives h = 16 h = 16 h = 16 . Connect ( 10 , 0 ) (10, 0) ( 10 , 0 ) and ( 0 , 16 ) (0, 16) ( 0 , 16 ) .

Part 3: Constraints and Systems

A constraint is a limit the situation imposes. Each one becomes an inequality, and together they carve out a region of acceptable solutions.

Problem. A food-truck owner makes tacos and burritos. Each taco uses 2 oz of beef and each burrito uses 5 oz. She has 200 oz of beef. She must make at least 20 tacos, and she cannot make a negative number of anything.

  • Constraint in words Inequality
  • Beef supply is limited to 200 oz 2 t + 5 b ≤ 200 2t + 5b \le 200 2 t + 5 b ≤ 200
  • At least 20 tacos t ≥ 20 t \ge 20 t ≥ 20
  • Cannot make negative burritos b ≥ 0 b \ge 0 b ≥ 0

The set of ( t , b ) (t, b) ( t , b ) pairs satisfying all three at once is the feasible region . Any point inside it is a workable production plan; any point outside violates something.

Testing a candidate plan. Is 30 tacos and 30 burritos feasible?

2 ( 30 ) + 5 ( 30 ) = 60 + 150 = 210 2(30) + 5(30) = 60 + 150 = 210 2 ( 30 ) + 5 ( 30 ) = 60 + 150 = 210 , and 210 ≤ 200 210 \le 200 210 ≤ 200 is false .

The plan fails on beef supply, so it is rejected — even though t ≥ 20 t \ge 20 t ≥ 20 and b ≥ 0 b \ge 0 b ≥ 0 both hold. All constraints must be satisfied simultaneously.

Part 4: Viable vs. Non-Viable Solutions

This is the modeling judgment TABE actually asks about, and it is the difference between an algebra answer and a correct answer.

Algebraic result Context Viable?

  • t = 4.5 t = 4.5 t = 4.5 hours of labor billed in quarter hours yes
  • b = 12.7 b = 12.7 b = 12.7 buses needed buses are whole no — round up to 13
  • n = − 3 n = -3 n = − 3 employees headcount no — reject; check the setup
  • p = $ 0 p = \text{\textdollar}0 p = $ 0 price must cover a $5 cost no — outside the stated constraint
  • x = 250 x = 250 x = 250 units machine capacity is 200 no — violates a constraint

Worked viability check. A ticket equation gives a = 8.4 a = 8.4 a = 8.4 adult tickets and c = 11.6 c = 11.6 c = 11.6 child tickets. Tickets are whole objects, so this exact solution is non-viable . The correct response is to report that no whole-number solution exists for the stated totals, or to identify the nearest whole-number pair that satisfies the constraints — not to round silently and present 8 and 12 as if they solved the original system.

The habit to build: after every modeling answer, ask two questions. Can this quantity be negative? Can it be a fraction? If the answer to either is no and your solution says otherwise, the model or the arithmetic needs another look.