Study guide

6.3 Linear Inequalities: Solving, Graphing on Number Lines, & Word Problems

TABE Mathematics Exam

Track your progress as you read

Finished sections get a check mark.

1 Exam Structure, Administration, Locator & NRS Scoring

1.1 TABE 13&14 Mathematics: Levels, Structure, & Administration 1.2 Scale Scores, NRS Levels, Out-of-Range Flags, & Measurable Skills Gains

2 Chapter 2: Number Operations in Base Ten & Number Systems

2.1 Whole Number Place Value, Multi-Digit Arithmetic, & Estimation 2.2 Decimal Operations, Place Value, & Practical Applications 2.3 Factors, Multiples, Divisibility Rules, & Prime Factorization 2.4 Meanings of Multiplication and Division: Equal Groups, Arrays, & Multiplicative Comparison 2.5 One-Step and Two-Step Word Problems with Unknown Quantities

3 Chapter 3: Fractions, Rational Numbers, & Signed Integers

3.1 Fraction Fundamentals, Equivalence, & Mixed Numbers 3.2 Fraction Arithmetic: Adding, Subtracting, Multiplying, & Dividing 3.3 Integers, Absolute Value, & Signed Rational Number Operations 3.4 Fraction Multiplication as Scaling, Unit-Fraction Division, & Fractions in Measurement

4 Chapter 4: Ratios, Proportions, & Percents

4.1 Ratios, Rates, Unit Rates, & Proportional Relationships 4.2 Percents: Triad Conversions, Percent Equations, & Base Calculations 4.3 Real-World Percent Applications: Tax, Discounts, Markups, Interest, & Percent Change 4.4 Ratio Reasoning with Tables, Tape Diagrams, & Double Number Lines

5 Chapter 5: Expressions and Algebraic Thinking

5.1 Arithmetic Patterns, Variables, & Translating Algebraic Expressions 5.2 Evaluating Expressions, Order of Operations, & Properties of Operations 5.3 Exponents, Square & Cube Roots, Radicals, & Scientific Notation 5.4 Independent and Dependent Variables, Tables, & Two-Quantity Relationships 5.5 Equivalent Expressions, Expression Structure, & Justifying Every Step 5.6 Radicals, Rational Exponents, & Approximating Irrational Numbers

6 Chapter 6: Equations and Inequalities

6.1 Solving One-Step & Two-Step Linear Equations 6.2 Multi-Step Equations, Variables on Both Sides, & Special Solution Sets 6.3 Linear Inequalities: Solving, Graphing on Number Lines, & Word Problems 6.4 Systems of Linear Equations: Graphing, Substitution, & Elimination Methods 6.5 Literal Equations & Rearranging Formulas 6.6 Creating Equations, Inequalities, & Constraint Models

7 Chapter 7: Advanced Algebra & Quadratic Equations

7.1 Polynomial Operations: Addition, Subtraction, & Multiplication 7.2 Factoring Polynomials & Solving Quadratic Equations by Factoring 7.3 The Quadratic Formula, Completing the Square, & Graphs of Quadratics

8 Chapter 8: Functions & Mathematical Modeling

8.1 Function Fundamentals, Notation, Domain, & Range 8.2 Linear Functions: Slope, Rate of Change, & Linear Equations 8.3 Exponential Growth & Decay Models, & Comparing Function Families 8.4 Building Functions & Interpreting Parameters in Context 8.5 Average Rate of Change, Qualitative Graphs, & Comparing Representations

9 Chapter 9: Measurement, Unit Conversions, & Statistical Displays

9.1 Customary & Metric Unit Conversions and Dimensional Analysis 9.2 Frequency Tables, Bar Graphs, Line Graphs, & Histograms 9.3 Measures of Central Tendency & Statistical Dispersion 9.4 Five-Number Summaries, Box Plots, & Bivariate Scatter Plots 9.5 Telling Time, Elapsed Time, & Money Calculations 9.6 Measuring and Estimating Length, Mass, & Liquid Volume 9.7 Line Plots, Dot Plots, & Picture Graphs 9.8 Units, Quantities, Precision, & Appropriate Accuracy

10 Chapter 10: Probability & Statistical Inferences

10.1 Theoretical vs. Experimental Probability, Sample Spaces, & Single-Event Outcomes 10.2 Compound Probability: Independent Events, Dependent Events, & Addition Rules 10.3 Sampling Techniques, Bias, & Making Population Inferences 10.4 Statistical Questions, Variability, & Describing Distributions 10.5 Probability Models, Relative Frequency, & Simulation

11 Chapter 11: Two-Dimensional Geometry & Spatial Reasoning

11.1 Geometric Fundamentals: Points, Lines, Angles, Angle Relationships, & Polygons 11.2 Perimeter of Polygons, Circle Anatomy, & Circumference Calculations 11.3 Area Formulas & Area of Composite Figures 11.4 Angle Measurement, Protractors, & Angle Addition 11.5 Classifying Two-Dimensional Figures & Partitioning Shapes into Equal Parts 11.6 Area by Tiling, Unit Squares, & the Distributive Property of Area

12 Chapter 12: Three-Dimensional Geometry, Coordinate Geometry, & Right Triangles

12.1 Volume and Surface Area of 3D Solids 12.2 Coordinate Geometry: Distance, Midpoint, & Geometric Transformations 12.3 The Pythagorean Theorem, Geometric Similarity, & Indirect Measurement 12.4 Volume by Unit Cubes & Additive Volume of Composite Solids 12.5 The Coordinate Plane: Plotting Points, Quadrants, & Polygons on the Grid 12.6 Density & Geometric Modeling

6.3 Linear Inequalities: Solving, Graphing on Number Lines, & Word Problems

Key Takeaways Explain This Topic AI

A linear inequality describes a relationship of relative magnitude ( < , ≤ , > , ≥ <, \le, >, \ge < , ≤ , > , ≥ ) whose solution set is an infinite continuous range of real numbers rather than a single point.

On a 1D number line, strict inequalities ( < , > <, > < , > ) are plotted with open boundary circles (indicating non-inclusion), while inclusive inequalities ( ≤ , ≥ \le, \ge ≤ , ≥ ) are plotted with solid closed circles (indicating inclusion).

The Golden Rule of Inequalities dictates that whenever both sides are multiplied or divided by a negative number, the inequality sign must be reversed ( < ↔ > < \leftrightarrow > <↔> , ≤ ↔ ≥ \le \leftrightarrow \ge ≤↔≥ ).

Compound inequalities connect two conditions: 'AND' inequalities represent the intersection ( a ≤ x ≤ b a \le x \le b a ≤ x ≤ b ) where both conditions hold simultaneously, while 'OR' inequalities represent the union ( x < a or x > b x < a \text{ or } x > b x < a or x > b ) of two separate solution rays.

Last updated: August 2026

6.3 Linear Inequalities: Solving, Graphing on Number Lines, & Word Problems

While linear equations determine exact, specific numerical values where expressions are equal, real-world constraints—such as staying within an operating budget, maintaining a minimum speed, or observing maximum load limits—are governed by inequalities . On the TABE assessment, you must be able to solve linear inequalities, reverse direction signs appropriately, graph continuous solutions on number lines, and evaluate compound relationships.

1. Inequality Symbols & The Concept of Continuous Solution Sets

An inequality compares two algebraic expressions using one of five relational symbols:

  • Symbol Mathematical Meaning Key Word Phrases Boundary Circle Type
  • < < < Strictly less than "fewer than", "under", "below", "less than" Open Circle ( ∘ \circ ∘ )

≤ \le ≤ Less than or equal to "at most", "maximum of", "no more than", "does not exceed" Closed Circle ( ∙ \bullet ∙ )

> > > Strictly greater than "more than", "exceeds", "above", "greater than" Open Circle ( ∘ \circ ∘ )

≥ \ge ≥ Greater than or equal to "at least", "minimum of", "no less than", "a bottom limit of" Closed Circle ( ∙ \bullet ∙ )

  • ≠ \ne  = Not equal to "is not equal to", "is different from" Open Circle at point
  • Discrete vs. Continuous Solution Sets

Unlike the equation x = 3 x = 3 x = 3 (which contains exactly one discrete point), the inequality x > 3 x > 3 x > 3 contains an infinite continuum of real numbers ( 3.0001 , 3.5 , 4 , 100 , 10 12 3.0001, 3.5, 4, 100, 10^{12} 3.0001 , 3.5 , 4 , 100 , 1 0 12 ). Because an infinite set of numbers cannot be listed individually, solutions are represented graphically on a number line or via algebraic interval notation.

2. Graphing Inequalities on a 1D Number Line

Graphing an inequality on a number line requires two decisions:

Boundary Point (Circle Type):

Use an Open Circle ( ∘ \circ ∘ ) for strict inequalities ( < < < or > > > ) to show the endpoint is excluded .

Use a Closed / Solid Circle ( ∙ \bullet ∙ ) for inclusive inequalities ( ≤ \le ≤ or ≥ \ge ≥ ) to show the endpoint is included .

Shading Direction (Ray):

Shade to the Right (toward + ∞ +\infty + ∞ ) when the variable is greater than the boundary value ( x > c x > c x > c or x ≥ c x \ge c x ≥ c ).

Shade to the Left (toward − ∞ -\infty − ∞ ) when the variable is less than the boundary value ( x < c x < c x < c or x ≤ c x \le c x ≤ c ). Graph of x > 2 (Open Circle at 2, Shaded Right):

  • <---+---+---+---(o)=======>
  • 1 0 1 2 3 4

Graph of x <= -1 (Closed Circle at -1, Shaded Left):

  • <=======*---+---+---+---+--->
  • 3 -2 -1 0 1 2 3

Tip

The Variable-First Alignment Rule: The inequality symbol points in the direction of the arrow only when the variable is on the left side ! If you obtain 5 < x 5 < x 5 < x , rewrite it with the variable on the left as x > 5 x > 5 x > 5 before shading to the right.

3. The Golden Rule of Inequalities: Multiplying or Dividing by a Negative

Solving a linear inequality follows the exact same inverse operations as solving a linear equation, with one vital, fundamental exception:

Caution

THE GOLDEN RULE OF INEQUALITIES: Whenever you multiply or divide both sides of an inequality by a negative number , you MUST REVERSE (FLIP) THE INEQUALITY SYMBOL : < ⟷ > and ≤ ⟷ ≥ < \;\longleftrightarrow\; > \qquad \text{and} \qquad \le \;\longleftrightarrow\; \ge < ⟷ > and ≤ ⟷ ≥

Why Does the Inequality Symbol Reverse?

Consider the true numerical inequality: 2 < 6 2 < 6 2 < 6 .

If we multiply both sides by positive 2 2 2 : 2 ( 2 ) < 6 ( 2 ) ⟹ 4 < 12 2(2) < 6(2) \implies 4 < 12 2 ( 2 ) < 6 ( 2 ) ⟹ 4 < 12 (Still True).

If we multiply both sides by negative 1 1 1 : 2 ( − 1 ) vs 6 ( − 1 ) ⟹ − 2 vs − 6 2(-1) \text{ vs } 6(-1) \implies -2 \text{ vs } -6 2 ( − 1 ) vs 6 ( − 1 ) ⟹ − 2 vs − 6 .

On a number line, − 2 -2 − 2 is to the right of − 6 -6 − 6 , which means − 2 > − 6 -2 > -6 − 2 > − 6 ! Multiplying by a negative reflects quantities across zero, completely inverting their relative order.

Step-by-Step Worked Demonstration

Problem: Solve − 4 x + 15 ≤ 39 -4x + 15 \le 39 − 4 x + 15 ≤ 39 . Step 1 (Undo Addition): − 4 x + 15 − 15 ≤ 39 − 15 − 4 x ≤ 24 Step 2 (Divide by − 4 and FLIP sign): − 4 x − 4 ≥ 24 − 4 ( ≤ flips to ≥ ) x ≥ − 6 \begin{aligned}

  • \text{Step 1 (Undo Addition):} &\quad -4x + 15 - 15 \le 39 - 15 \\
  • &\quad -4x \le 24 \\

\text{Step 2 (Divide by } -4 \text{ and FLIP sign):} &\quad \frac{-4x}{-4} \ge \frac{24}{-4} \quad (\le \text{ flips to } \ge) \\

&\quad x \ge -6

\end{aligned} Step 1 (Undo Addition): Step 2 (Divide by − 4 and FLIP sign): ​ − 4 x + 15 − 15 ≤ 39 − 15 − 4 x ≤ 24 − 4 − 4 x ​ ≥ − 4 24 ​ ( ≤ flips to ≥ ) x ≥ − 6 ​

Graphical Representation: A solid closed circle at − 6 -6 − 6 with shading extending infinitely to the right.

4. Multi-Step Linear Inequalities

Example: Solve 3 ( 2 x − 5 ) − 4 x < 7 x + 9 3(2x - 5) - 4x < 7x + 9 3 ( 2 x − 5 ) − 4 x < 7 x + 9 . Step 1 (Distribute): 6 x − 15 − 4 x < 7 x + 9 Step 2 (Combine Like Terms): 2 x − 15 < 7 x + 9 Step 3 (Collect Variables on Left): 2 x − 7 x − 15 < 9 − 5 x − 15 < 9 Step 4 (Undo Subtraction): − 5 x < 24 Step 5 (Divide by − 5 and FLIP): x > − 24 5 ( x > − 4.8 ) \begin{aligned}

  • \text{Step 1 (Distribute):} &\quad 6x - 15 - 4x < 7x + 9 \\
  • \text{Step 2 (Combine Like Terms):} &\quad 2x - 15 < 7x + 9 \\
  • \text{Step 3 (Collect Variables on Left):} &\quad 2x - 7x - 15 < 9 \\
  • &\quad -5x - 15 < 9 \\
  • \text{Step 4 (Undo Subtraction):} &\quad -5x < 24 \\
  • \text{Step 5 (Divide by } -5 \text{ and FLIP):} &\quad x > -\frac{24}{5} \quad (x > -4.8)

\end{aligned} Step 1 (Distribute): Step 2 (Combine Like Terms): Step 3 (Collect Variables on Left): Step 4 (Undo Subtraction): Step 5 (Divide by − 5 and FLIP): ​ 6 x − 15 − 4 x < 7 x + 9 2 x − 15 < 7 x + 9 2 x − 7 x − 15 < 9 − 5 x − 15 < 9 − 5 x < 24 x > − 5 24 ​ ( x > − 4.8 ) ​

5. Compound Inequalities: "AND" vs. "OR"

A compound inequality connects two individual inequalities with either the conjunction "AND" or the disjunction "OR". Compound Inequalities:

  • ├── 1. "AND" Conjunction (Intersection ∩) ──> a <= x <= b (Bounded Overlapping Segment)
  • └── 2. "OR" Disjunction (Union ∪) ──────────> x < a OR x > b (Two Diverging Rays)
  • 1. "AND" Compound Inequalities (Intersection ∩ \cap ∩ )

In an "AND" inequality, both conditions must be true simultaneously. It is typically written as a continuous double-ended inequality: a < x < b a < x < b a < x < b .

Worked Example: Solve − 8 ≤ 2 x + 4 < 14 -8 \le 2x + 4 < 14 − 8 ≤ 2 x + 4 < 14 .

To solve, perform inverse operations to all three parts simultaneously : Subtract 4 from all 3 parts: − 8 − 4 ≤ 2 x + 4 − 4 < 14 − 4 − 12 ≤ 2 x < 10 Divide all 3 parts by 2: − 12 2 ≤ 2 x 2 < 10 2 − 6 ≤ x < 5 \begin{aligned}

  • \text{Subtract 4 from all 3 parts:} &\quad -8 - 4 \le 2x + 4 - 4 < 14 - 4 \\
  • &\quad -12 \le 2x < 10 \\
  • \text{Divide all 3 parts by 2:} &\quad \frac{-12}{2} \le \frac{2x}{2} < \frac{10}{2} \\
  • &\quad -6 \le x < 5

\end{aligned} Subtract 4 from all 3 parts: Divide all 3 parts by 2: ​ − 8 − 4 ≤ 2 x + 4 − 4 < 14 − 4 − 12 ≤ 2 x < 10 2 − 12 ​ ≤ 2 2 x ​ < 2 10 ​ − 6 ≤ x < 5 ​

Graph: A closed circle at − 6 -6 − 6 , an open circle at 5 5 5 , and the segment between them shaded.

2. "OR" Compound Inequalities (Union ∪ \cup ∪ )

In an "OR" inequality, a value of x x x is a solution if it satisfies at least one of the individual inequalities. The two parts are solved separately.

Worked Example: Solve 4 x − 3 < − 15 or 2 x + 7 ≥ 17 4x - 3 < -15 \quad \text{or} \quad 2x + 7 \ge 17 4 x − 3 < − 15 or 2 x + 7 ≥ 17 .

Left inequality: 4 x < − 12 ⟹ x < − 3 4x < -12 \implies x < -3 4 x < − 12 ⟹ x < − 3 .

Right inequality: 2 x ≥ 10 ⟹ x ≥ 5 2x \ge 10 \implies x \ge 5 2 x ≥ 10 ⟹ x ≥ 5 .

Combined Solution: x < − 3 or x ≥ 5 x < -3 \quad \text{or} \quad x \ge 5 x < − 3 or x ≥ 5 . Graph: An open circle at − 3 -3 − 3 shaded to the left, and a solid circle at 5 5 5 shaded to the right.

  • 6. Real-World Constraints & Word Problems
  • Workplace Problem 1: Freight Elevator Maximum Load

Problem: A warehouse cargo elevator has a safe working load limit of 2 , 500 lbs 2,500\text{ lbs} 2 , 500 lbs . An operator weighing 190 lbs 190\text{ lbs} 190 lbs must transport pallets of engine parts weighing 140 lbs 140\text{ lbs} 140 lbs each. What is the maximum number of pallets p p p that can be safely loaded?

  • Set Up Inequality: 140 p + 190 ≤ 2500 140p + 190 \le 2500 140 p + 190 ≤ 2500
  • Solve: 140 p ≤ 2500 − 190 140 p ≤ 2310 p ≤ 2310 140 = 16.5 \begin{aligned}
  • 140p &\le 2500 - 190 \\
  • 140p &\le 2310 \\
  • p &\le \frac{2310}{140} = 16.5
  • \end{aligned} 140 p 140 p p ​ ≤ 2500 − 190 ≤ 2310 ≤ 140 2310 ​ = 16.5 ​

Practical Interpretation: Because you cannot load a partial pallet without exceeding safe capacity, round down to the nearest integer: 16 16 16 pallets maximum .

Academic Target Problem 2: Average Score Target

Problem: A nursing student needs an overall average of at least 84 84 84 across four pharmacology exams to pass. On the first three exams, the student scored 79 , 88 , 79, 88, 79 , 88 , and 81 81 81 . What score s s s must be earned on the fourth exam? 79 + 88 + 81 + s 4 ≥ 84 248 + s 4 ≥ 84 248 + s ≥ 84 × 4 248 + s ≥ 336 s ≥ 336 − 248 s ≥ 88 \begin{aligned}

  • \frac{79 + 88 + 81 + s}{4} &\ge 84 \\
  • \frac{248 + s}{4} &\ge 84 \\
  • 248 + s &\ge 84 \times 4 \\
  • 248 + s &\ge 336 \\
  • s &\ge 336 - 248 \\
  • s &\ge 88

\end{aligned} 4 79 + 88 + 81 + s ​ 4 248 + s ​ 248 + s 248 + s s s ​ ≥ 84 ≥ 84 ≥ 84 × 4 ≥ 336 ≥ 336 − 248 ≥ 88 ​

Conclusion: The student must score at least 88 88 88 on the final exam.

Loading diagram... Inequality Solving and Graphing Decision Matrix