Study guide
3.4 Fraction Multiplication as Scaling, Unit-Fraction Division, & Fractions in Measurement
TABE Mathematics Exam
Track your progress as you read
Finished sections get a check mark.
1 Exam Structure, Administration, Locator & NRS Scoring
1.1 TABE 13&14 Mathematics: Levels, Structure, & Administration 1.2 Scale Scores, NRS Levels, Out-of-Range Flags, & Measurable Skills Gains
2 Chapter 2: Number Operations in Base Ten & Number Systems
2.1 Whole Number Place Value, Multi-Digit Arithmetic, & Estimation 2.2 Decimal Operations, Place Value, & Practical Applications 2.3 Factors, Multiples, Divisibility Rules, & Prime Factorization 2.4 Meanings of Multiplication and Division: Equal Groups, Arrays, & Multiplicative Comparison 2.5 One-Step and Two-Step Word Problems with Unknown Quantities
3 Chapter 3: Fractions, Rational Numbers, & Signed Integers
3.1 Fraction Fundamentals, Equivalence, & Mixed Numbers 3.2 Fraction Arithmetic: Adding, Subtracting, Multiplying, & Dividing 3.3 Integers, Absolute Value, & Signed Rational Number Operations 3.4 Fraction Multiplication as Scaling, Unit-Fraction Division, & Fractions in Measurement
4 Chapter 4: Ratios, Proportions, & Percents
4.1 Ratios, Rates, Unit Rates, & Proportional Relationships 4.2 Percents: Triad Conversions, Percent Equations, & Base Calculations 4.3 Real-World Percent Applications: Tax, Discounts, Markups, Interest, & Percent Change 4.4 Ratio Reasoning with Tables, Tape Diagrams, & Double Number Lines
5 Chapter 5: Expressions and Algebraic Thinking
5.1 Arithmetic Patterns, Variables, & Translating Algebraic Expressions 5.2 Evaluating Expressions, Order of Operations, & Properties of Operations 5.3 Exponents, Square & Cube Roots, Radicals, & Scientific Notation 5.4 Independent and Dependent Variables, Tables, & Two-Quantity Relationships 5.5 Equivalent Expressions, Expression Structure, & Justifying Every Step 5.6 Radicals, Rational Exponents, & Approximating Irrational Numbers
6 Chapter 6: Equations and Inequalities
6.1 Solving One-Step & Two-Step Linear Equations 6.2 Multi-Step Equations, Variables on Both Sides, & Special Solution Sets 6.3 Linear Inequalities: Solving, Graphing on Number Lines, & Word Problems 6.4 Systems of Linear Equations: Graphing, Substitution, & Elimination Methods 6.5 Literal Equations & Rearranging Formulas 6.6 Creating Equations, Inequalities, & Constraint Models
7 Chapter 7: Advanced Algebra & Quadratic Equations
7.1 Polynomial Operations: Addition, Subtraction, & Multiplication 7.2 Factoring Polynomials & Solving Quadratic Equations by Factoring 7.3 The Quadratic Formula, Completing the Square, & Graphs of Quadratics
8 Chapter 8: Functions & Mathematical Modeling
8.1 Function Fundamentals, Notation, Domain, & Range 8.2 Linear Functions: Slope, Rate of Change, & Linear Equations 8.3 Exponential Growth & Decay Models, & Comparing Function Families 8.4 Building Functions & Interpreting Parameters in Context 8.5 Average Rate of Change, Qualitative Graphs, & Comparing Representations
9 Chapter 9: Measurement, Unit Conversions, & Statistical Displays
9.1 Customary & Metric Unit Conversions and Dimensional Analysis 9.2 Frequency Tables, Bar Graphs, Line Graphs, & Histograms 9.3 Measures of Central Tendency & Statistical Dispersion 9.4 Five-Number Summaries, Box Plots, & Bivariate Scatter Plots 9.5 Telling Time, Elapsed Time, & Money Calculations 9.6 Measuring and Estimating Length, Mass, & Liquid Volume 9.7 Line Plots, Dot Plots, & Picture Graphs 9.8 Units, Quantities, Precision, & Appropriate Accuracy
10 Chapter 10: Probability & Statistical Inferences
10.1 Theoretical vs. Experimental Probability, Sample Spaces, & Single-Event Outcomes 10.2 Compound Probability: Independent Events, Dependent Events, & Addition Rules 10.3 Sampling Techniques, Bias, & Making Population Inferences 10.4 Statistical Questions, Variability, & Describing Distributions 10.5 Probability Models, Relative Frequency, & Simulation
11 Chapter 11: Two-Dimensional Geometry & Spatial Reasoning
11.1 Geometric Fundamentals: Points, Lines, Angles, Angle Relationships, & Polygons 11.2 Perimeter of Polygons, Circle Anatomy, & Circumference Calculations 11.3 Area Formulas & Area of Composite Figures 11.4 Angle Measurement, Protractors, & Angle Addition 11.5 Classifying Two-Dimensional Figures & Partitioning Shapes into Equal Parts 11.6 Area by Tiling, Unit Squares, & the Distributive Property of Area
12 Chapter 12: Three-Dimensional Geometry, Coordinate Geometry, & Right Triangles
12.1 Volume and Surface Area of 3D Solids 12.2 Coordinate Geometry: Distance, Midpoint, & Geometric Transformations 12.3 The Pythagorean Theorem, Geometric Similarity, & Indirect Measurement 12.4 Volume by Unit Cubes & Additive Volume of Composite Solids 12.5 The Coordinate Plane: Plotting Points, Quadrants, & Polygons on the Grid 12.6 Density & Geometric Modeling
3.4 Fraction Multiplication as Scaling, Unit-Fraction Division, & Fractions in Measurement
Key Takeaways Explain This Topic AI
Multiplying by a fraction greater than 1 enlarges a quantity, multiplying by a fraction less than 1 shrinks it, and multiplying by exactly 1 in disguise (such as 4/4) leaves it unchanged.
Because multiplying by a proper fraction makes a number smaller, "of" problems such as 2/3 of 45 are multiplication even though the answer is less than the original.
Dividing a whole number by a unit fraction gives a larger result: 5 ÷ 1/4 = 20 because there are four quarters in every whole.
Fraction arithmetic on TABE lives in measurement contexts — inch rulers, recipe scaling, and lumber cuts — so the unit must travel through every step of the calculation.
Last updated: August 2026
Fraction Multiplication as Scaling, Unit-Fraction Division, & Fractions in Measurement
Section 3.2 covered the procedures for fraction arithmetic. This section covers the reasoning TABE tests alongside them: predicting whether an answer should be bigger or smaller before you compute, and handling the measurement situations where Level M places most fraction items.
Multiplication as Scaling (Resizing)
Think of multiplication as resizing the first factor. The size of the second factor tells you which direction:
Multiply by… Effect on the product Example
a number greater than 1 product is larger than the original 3 2 × 40 = 60 \tfrac{3}{2} \times 40 = 60 2 3 × 40 = 60
exactly 1 (including 5 5 \tfrac{5}{5} 5 5 , 12 12 \tfrac{12}{12} 12 12 ) product equals the original 7 7 × 40 = 40 \tfrac{7}{7} \times 40 = 40 7 7 × 40 = 40
a number between 0 and 1 product is smaller than the original 3 4 × 40 = 30 \tfrac{3}{4} \times 40 = 30 4 3 × 40 = 30
This is why generating an equivalent fraction works at all: multiplying 2 3 \frac{2}{3} 3 2 by 4 4 \frac{4}{4} 4 4 gives 8 12 \frac{8}{12} 12 8 , a different-looking fraction of exactly the same size, because 4 4 = 1 \frac{4}{4} = 1 4 4 = 1 .
Predict before you compute. If a TABE item asks for 5 8 \frac{5}{8} 8 5 of 96 and one answer choice is 153.6, you can reject it instantly — 5 8 \frac{5}{8} 8 5 is less than 1, so the answer must be less than 96. (It is 60.)
"Of" Means Multiply
The word of between a fraction and a quantity signals multiplication: 2 3 of 45 = 2 3 × 45 = 2 × 45 3 = 90 3 = 30 \frac{2}{3} \text{ of } 45 = \frac{2}{3} \times 45 = \frac{2 \times 45}{3} = \frac{90}{3} = \mathbf{30} 3 2 of 45 = 3 2 × 45 = 3 2 × 45 = 3 90 = 30
A faster route for mental math: divide by the denominator, multiply by the numerator. 45 ÷ 3 = 15 45 \div 3 = 15 45 ÷ 3 = 15 , then 15 × 2 = 30 15 \times 2 = 30 15 × 2 = 30 . This works every time and keeps the numbers small enough for Part 1.
Fraction of a fraction 3 4 of 2 5 = 3 4 × 2 5 = 6 20 = 3 10 \frac{3}{4} \text{ of } \frac{2}{5} = \frac{3}{4} \times \frac{2}{5} = \frac{6}{20} = \frac{3}{10} 4 3 of 5 2 = 4 3 × 5 2 = 20 6 = 10 3
Because both factors are less than 1, the product is smaller than either of them — which surprises learners the first time and is a favorite TABE distractor.
Dividing With Unit Fractions
A unit fraction has a numerator of 1. Division involving unit fractions runs in two directions, and mixing them up is the most common Level M fraction error.
Whole number ÷ unit fraction → bigger answer. The question is "how many of these small pieces fit?" 5 ÷ 1 4 = 5 × 4 = 20 5 \div \frac{1}{4} = 5 \times 4 = \mathbf{20} 5 ÷ 4 1 = 5 × 4 = 20
Five whole sandwiches cut into quarters make 20 quarter-sandwiches.
Unit fraction ÷ whole number → smaller answer. The question is "share this piece among this many." 1 4 ÷ 5 = 1 4 × 1 5 = 1 20 \frac{1}{4} \div 5 = \frac{1}{4} \times \frac{1}{5} = \mathbf{\frac{1}{20}} 4 1 ÷ 5 = 4 1 × 5 1 = 20 1
A quarter of a pan shared among 5 people gives each one-twentieth of the pan.
- Situation Setup Result relative to start
- How many 1 3 \frac{1}{3} 3 1 -cup scoops in 4 cups? 4 ÷ 1 3 4 \div \frac{1}{3} 4 ÷ 3 1 12 — larger
1 3 \frac{1}{3} 3 1 cup split among 4 bowls? 1 3 ÷ 4 \frac{1}{3} \div 4 3 1 ÷ 4 1 12 \frac{1}{12} 12 1 cup — smaller
Fractions in Measurement Contexts
Level M fraction items are rarely bare computation; they are rulers, recipes, and material.
Inch rulers and sixteenths
A standard inch ruler is marked in halves, quarters, eighths, and sixteenths. Reading it well means recognizing that 6 16 = 3 8 \frac{6}{16} = \frac{3}{8} 16 6 = 8 3 and 12 16 = 3 4 \frac{12}{16} = \frac{3}{4} 16 12 = 4 3 on sight.
A bolt measures 2 5 8 2\frac{5}{8} 2 8 5 inches and passes through material 1 3 4 1\frac{3}{4} 1 4 3 inches thick. How much bolt protrudes?
2 5 8 − 1 3 4 = 2 5 8 − 1 6 8 = 1 13 8 − 1 6 8 = 7 8 2\frac{5}{8} - 1\frac{3}{4} = 2\frac{5}{8} - 1\frac{6}{8} = 1\frac{13}{8} - 1\frac{6}{8} = \mathbf{\frac{7}{8}} 2 8 5 − 1 4 3 = 2 8 5 − 1 8 6 = 1 8 13 − 1 8 6 = 8 7 inch.
Recipe scaling
Scaling a recipe by 3 2 \frac{3}{2} 2 3 (one and a half batches) or 1 2 \frac{1}{2} 2 1 (half batch) multiplies every ingredient:
Ingredient Original × 3 2 \times \frac{3}{2} × 2 3
flour 2 1 4 2\frac{1}{4} 2 4 1 cups 9 4 × 3 2 = 27 8 = 3 3 8 \frac{9}{4} \times \frac{3}{2} = \frac{27}{8} = 3\frac{3}{8} 4 9 × 2 3 = 8 27 = 3 8 3 cups
- butter 2 3 \frac{2}{3} 3 2 cup 2 3 × 3 2 = 1 \frac{2}{3} \times \frac{3}{2} = 1 3 2 × 2 3 = 1 cup
- salt 1 2 \frac{1}{2} 2 1 tsp 3 4 \frac{3}{4} 4 3 tsp
- Material cuts
A carpenter has a board 10 1 2 10\frac{1}{2} 10 2 1 feet long and needs pieces 7 8 \frac{7}{8} 8 7 foot long. How many complete pieces?
10 1 2 ÷ 7 8 = 21 2 × 8 7 = 168 14 = 12 10\frac{1}{2} \div \frac{7}{8} = \frac{21}{2} \times \frac{8}{7} = \frac{168}{14} = \mathbf{12} 10 2 1 ÷ 8 7 = 2 21 × 7 8 = 14 168 = 12 pieces.
Keep the unit attached at every step. "12" is meaningless; "12 pieces" is an answer.