Study guide

8.3 Exponential Growth & Decay Models, & Comparing Function Families

TABE Mathematics Exam

Track your progress as you read

Finished sections get a check mark.

1 Exam Structure, Administration, Locator & NRS Scoring

1.1 TABE 13&14 Mathematics: Levels, Structure, & Administration 1.2 Scale Scores, NRS Levels, Out-of-Range Flags, & Measurable Skills Gains

2 Chapter 2: Number Operations in Base Ten & Number Systems

2.1 Whole Number Place Value, Multi-Digit Arithmetic, & Estimation 2.2 Decimal Operations, Place Value, & Practical Applications 2.3 Factors, Multiples, Divisibility Rules, & Prime Factorization 2.4 Meanings of Multiplication and Division: Equal Groups, Arrays, & Multiplicative Comparison 2.5 One-Step and Two-Step Word Problems with Unknown Quantities

3 Chapter 3: Fractions, Rational Numbers, & Signed Integers

3.1 Fraction Fundamentals, Equivalence, & Mixed Numbers 3.2 Fraction Arithmetic: Adding, Subtracting, Multiplying, & Dividing 3.3 Integers, Absolute Value, & Signed Rational Number Operations 3.4 Fraction Multiplication as Scaling, Unit-Fraction Division, & Fractions in Measurement

4 Chapter 4: Ratios, Proportions, & Percents

4.1 Ratios, Rates, Unit Rates, & Proportional Relationships 4.2 Percents: Triad Conversions, Percent Equations, & Base Calculations 4.3 Real-World Percent Applications: Tax, Discounts, Markups, Interest, & Percent Change 4.4 Ratio Reasoning with Tables, Tape Diagrams, & Double Number Lines

5 Chapter 5: Expressions and Algebraic Thinking

5.1 Arithmetic Patterns, Variables, & Translating Algebraic Expressions 5.2 Evaluating Expressions, Order of Operations, & Properties of Operations 5.3 Exponents, Square & Cube Roots, Radicals, & Scientific Notation 5.4 Independent and Dependent Variables, Tables, & Two-Quantity Relationships 5.5 Equivalent Expressions, Expression Structure, & Justifying Every Step 5.6 Radicals, Rational Exponents, & Approximating Irrational Numbers

6 Chapter 6: Equations and Inequalities

6.1 Solving One-Step & Two-Step Linear Equations 6.2 Multi-Step Equations, Variables on Both Sides, & Special Solution Sets 6.3 Linear Inequalities: Solving, Graphing on Number Lines, & Word Problems 6.4 Systems of Linear Equations: Graphing, Substitution, & Elimination Methods 6.5 Literal Equations & Rearranging Formulas 6.6 Creating Equations, Inequalities, & Constraint Models

7 Chapter 7: Advanced Algebra & Quadratic Equations

7.1 Polynomial Operations: Addition, Subtraction, & Multiplication 7.2 Factoring Polynomials & Solving Quadratic Equations by Factoring 7.3 The Quadratic Formula, Completing the Square, & Graphs of Quadratics

8 Chapter 8: Functions & Mathematical Modeling

8.1 Function Fundamentals, Notation, Domain, & Range 8.2 Linear Functions: Slope, Rate of Change, & Linear Equations 8.3 Exponential Growth & Decay Models, & Comparing Function Families 8.4 Building Functions & Interpreting Parameters in Context 8.5 Average Rate of Change, Qualitative Graphs, & Comparing Representations

9 Chapter 9: Measurement, Unit Conversions, & Statistical Displays

9.1 Customary & Metric Unit Conversions and Dimensional Analysis 9.2 Frequency Tables, Bar Graphs, Line Graphs, & Histograms 9.3 Measures of Central Tendency & Statistical Dispersion 9.4 Five-Number Summaries, Box Plots, & Bivariate Scatter Plots 9.5 Telling Time, Elapsed Time, & Money Calculations 9.6 Measuring and Estimating Length, Mass, & Liquid Volume 9.7 Line Plots, Dot Plots, & Picture Graphs 9.8 Units, Quantities, Precision, & Appropriate Accuracy

10 Chapter 10: Probability & Statistical Inferences

10.1 Theoretical vs. Experimental Probability, Sample Spaces, & Single-Event Outcomes 10.2 Compound Probability: Independent Events, Dependent Events, & Addition Rules 10.3 Sampling Techniques, Bias, & Making Population Inferences 10.4 Statistical Questions, Variability, & Describing Distributions 10.5 Probability Models, Relative Frequency, & Simulation

11 Chapter 11: Two-Dimensional Geometry & Spatial Reasoning

11.1 Geometric Fundamentals: Points, Lines, Angles, Angle Relationships, & Polygons 11.2 Perimeter of Polygons, Circle Anatomy, & Circumference Calculations 11.3 Area Formulas & Area of Composite Figures 11.4 Angle Measurement, Protractors, & Angle Addition 11.5 Classifying Two-Dimensional Figures & Partitioning Shapes into Equal Parts 11.6 Area by Tiling, Unit Squares, & the Distributive Property of Area

12 Chapter 12: Three-Dimensional Geometry, Coordinate Geometry, & Right Triangles

12.1 Volume and Surface Area of 3D Solids 12.2 Coordinate Geometry: Distance, Midpoint, & Geometric Transformations 12.3 The Pythagorean Theorem, Geometric Similarity, & Indirect Measurement 12.4 Volume by Unit Cubes & Additive Volume of Composite Solids 12.5 The Coordinate Plane: Plotting Points, Quadrants, & Polygons on the Grid 12.6 Density & Geometric Modeling

8.3 Exponential Growth & Decay Models, & Comparing Function Families

Key Takeaways Explain This Topic AI

An exponential function has the algebraic form f ( x ) = a ⋅ b x f(x) = a \cdot b^x f ( x ) = a ⋅ b x , where a a a represents the non-zero initial amount ( y y y -intercept when x = 0 x = 0 x = 0 ) and b b b represents the constant multiplicative base factor ( b > 0 , b ≠ 1 b > 0, b \neq 1 b > 0 , b  = 1 ).

In exponential growth models ( b > 1 b > 1 b > 1 ), the growth factor is b = 1 + r b = 1 + r b = 1 + r , whereas in exponential decay models ( 0 < b < 1 0 < b < 1 0 < b < 1 ), the decay factor is b = 1 − r b = 1 - r b = 1 − r , where r r r is the fractional growth/decay rate per time interval.

Key real-world exponential formulas include compound interest A = P ( 1 + r n ) n t A = P\left(1 + \frac{r}{n}\right)^{nt} A = P ( 1 + n r ​ ) n t , asset depreciation V ( t ) = P ( 1 − r ) t V(t) = P(1 - r)^t V ( t ) = P ( 1 − r ) t , and radioactive half-life decay N ( t ) = N 0 ( 1 2 ) t / t 1 / 2 N(t) = N_0 \left(\frac{1}{2}\right)^{t / t_{1/2}} N ( t ) = N 0 ​ ( 2 1 ​ ) t / t 1/2 ​ .

Function families are classified from data tables by inspecting rates of change: linear functions have constant first differences ( Δ y \Delta y Δ y ), quadratic functions have constant second differences ( Δ 2 y \Delta^2 y Δ 2 y ), and exponential functions have constant multiplicative ratios ( y n y n − 1 \frac{y_{n}}{y_{n-1}} y n − 1 ​ y n ​ ​ ).

Last updated: August 2026

8.3 Exponential Growth & Decay Models, & Comparing Function Families

While linear functions model situations with a constant additive change, many real-world phenomena—including compound interest, biological population growth, epidemic spread, equipment depreciation, and radioactive decay—change by a constant multiplicative factor over equal intervals of time. These relationships are modeled by exponential functions .

1. Anatomy of an Exponential Function

The standard algebraic form of an exponential function is: f ( x ) = a ⋅ b x f(x) = a \cdot b^x f ( x ) = a ⋅ b x Anatomy of f(x) = a · b^x:

  • ├── a: Initial Value / Starting Amount (y-intercept at (0, a) since b^0 = 1, a ≠ 0)
  • ├── b: Base Factor / Multiplier (b > 0 and b ≠ 1)
  • └── x: Independent Variable (Exponent representing time intervals or cycles)
  • Key Structural Features

Domain: All real numbers ( − ∞ , ∞ ) (-\infty, \infty) ( − ∞ , ∞ ) .

Range (when a > 0 a > 0 a > 0 ): All positive real numbers ( 0 , ∞ ) (0, \infty) ( 0 , ∞ ) . The function values approach but never reach zero.

Horizontal Asymptote: The line y = 0 y = 0 y = 0 ( x x x -axis) acts as a horizontal asymptote.

2. Exponential Growth vs. Exponential Decay

The behavior of an exponential function is dictated entirely by its base factor b b b : Exponential Growth vs Decay:

  • EXPONENTIAL GROWTH (b > 1) EXPONENTIAL DECAY (0 < b < 1)
  • | / | \
  • | / | \
  • | / | \
  • | / | \___
  • -------+---/---------- x --------+---------────── x
  • | / (Asymptote y=0) | (Asymptote y=0)
  • Feature Exponential Growth Exponential Decay
  • Base Factor Condition b > 1 b > 1 b > 1 0 < b < 1 0 < b < 1 0 < b < 1

Formulation with Rate r r r b = 1 + r b = 1 + r b = 1 + r ( r = growth rate as decimal r = \text{growth rate as decimal} r = growth rate as decimal ) b = 1 − r b = 1 - r b = 1 − r ( r = decay rate as decimal r = \text{decay rate as decimal} r = decay rate as decimal )

  • Curve Direction Rises steeply from left to right Falls rapidly, then levels off toward y = 0 y = 0 y = 0
  • Real-World Examples Compound interest, population growth Machinery depreciation, drug clearance, half-life

Caution

The Percentage Rate vs. Base Factor Trap: If an investment grows by 7 % 7\% 7% annually, the base factor is b = 1 + 0.07 = 1.07 b = 1 + 0.07 = 1.07 b = 1 + 0.07 = 1.07 (NOT 0.07 0.07 0.07 ). If a vehicle depreciates by 15 % 15\% 15% annually, the base factor is b = 1 − 0.15 = 0.85 b = 1 - 0.15 = 0.85 b = 1 − 0.15 = 0.85 (NOT 0.15 0.15 0.15 or 0.85 0.85 0.85 subtracted from x x x ).

  • 3. Applied Exponential Growth & Decay Models
  • A. The Compound Interest Formula

When interest is compounded n n n times per year, interest earned in earlier periods begins earning interest itself: A = P ( 1 + r n ) n t A = P\left(1 + \frac{r}{n}\right)^{nt} A = P ( 1 + n r ​ ) n t

A = Total accumulated balance (principal + interest) A = \text{Total accumulated balance (principal + interest)} A = Total accumulated balance (principal + interest)

P = Principal (initial investment amount) P = \text{Principal (initial investment amount)} P = Principal (initial investment amount)

r = Annual interest rate expressed as a decimal r = \text{Annual interest rate expressed as a decimal} r = Annual interest rate expressed as a decimal ( 6 % = 0.06 6\% = 0.06 6% = 0.06 )

n = Number of compounding periods per year n = \text{Number of compounding periods per year} n = Number of compounding periods per year

  • Annually: n = 1 n = 1 n = 1
  • Semi-annually: n = 2 n = 2 n = 2
  • Quarterly: n = 4 n = 4 n = 4
  • Monthly: n = 12 n = 12 n = 12
  • Daily: n = 365 n = 365 n = 365
  • t = Time in years t = \text{Time in years} t = Time in years

Worked Example 1: A commercial reserve account deposits $ 8 , 000 \text{\textdollar}8,000 $ 8 , 000 at an annual interest rate of 6 % 6\% 6% compounded quarterly. Find the balance after 5 5 5 years.

Identify parameters: P = 8000 P = 8000 P = 8000 , r = 0.06 r = 0.06 r = 0.06 , n = 4 n = 4 n = 4 , t = 5 t = 5 t = 5 .

Calculate periodic rate: r n = 0.06 4 = 0.015 \frac{r}{n} = \frac{0.06}{4} = 0.015 n r ​ = 4 0.06 ​ = 0.015 .

Calculate total periods: n t = 4 × 5 = 20 nt = 4 \times 5 = 20 n t = 4 × 5 = 20 .

Apply formula: A = 8000 ( 1 + 0.015 ) 20 = 8000 ( 1.015 ) 20 A = 8000(1 + 0.015)^{20} = 8000(1.015)^{20} A = 8000 ( 1 + 0.015 ) 20 = 8000 ( 1.015 ) 20 A ≈ 8000 ( 1.346855 ) = $ 10 , 774.84 A \approx 8000(1.346855) = \$10,774.84 A ≈ 8000 ( 1.346855 ) = $10 , 774.84

B. Equipment & Asset Depreciation

Physical machinery, commercial vehicles, and electronics lose value at an annual percentage rate: V ( t ) = P ( 1 − r ) t V(t) = P(1 - r)^t V ( t ) = P ( 1 − r ) t

Worked Example 2: A CNC manufacturing mill is purchased for $ 45 , 000 \text{\textdollar}45,000 $ 45 , 000 and depreciates at 12 % 12\% 12% per year. Find its value after 3 3 3 years. V ( t ) = 45000 ( 1 − 0.12 ) t = 45000 ( 0.88 ) t V ( 3 ) = 45000 ( 0.88 ) 3 = 45000 ( 0.681472 ) = $ 30 , 666.24 \begin{aligned}

  • V(t) &= 45000(1 - 0.12)^t = 45000(0.88)^t \\
  • V(3) &= 45000(0.88)^3 = 45000(0.681472) = \$30,666.24

\end{aligned} V ( t ) V ( 3 ) ​ = 45000 ( 1 − 0.12 ) t = 45000 ( 0.88 ) t = 45000 ( 0.88 ) 3 = 45000 ( 0.681472 ) = $30 , 666.24 ​

C. Radioactive Decay & Half-Life

The half-life ( t 1 / 2 t_{1/2} t 1/2 ​ ) is the time required for half of a radioactive substance to decay: N ( t ) = N 0 ( 1 2 ) t t 1 / 2 N(t) = N_0 \left(\frac{1}{2}\right)^{\frac{t}{t_{1/2}}} N ( t ) = N 0 ​ ( 2 1 ​ ) t 1/2 ​ t ​

If a 200 mg 200\text{ mg} 200 mg sample has a half-life of 6 hours 6\text{ hours} 6 hours , the amount remaining after 18 hours 18\text{ hours} 18 hours ( 3 3 3 half-life cycles) is: N ( 18 ) = 200 ( 1 2 ) 18 6 = 200 ( 1 2 ) 3 = 200 ( 1 8 ) = 25 mg N(18) = 200\left(\frac{1}{2}\right)^{\frac{18}{6}} = 200\left(\frac{1}{2}\right)^3 = 200\left(\frac{1}{8}\right) = 25\text{ mg} N ( 18 ) = 200 ( 2 1 ​ ) 6 18 ​ = 200 ( 2 1 ​ ) 3 = 200 ( 8 1 ​ ) = 25 mg

4. Comparing Function Families: Linear, Quadratic, & Exponential

On TABE Mathematics Level A, recognizing and comparing different function families from data tables and graphs is a heavily tested competency: Tabular Difference Method for Function Identification (Equal x-intervals):

  • ├── 1. First Differences Constant (Δy = k) ─────────> LINEAR (y = mx + b)
  • ├── 2. Second Differences Constant (Δ²y = k) ───────> QUADRATIC (y = ax² + bx + c)
  • └── 3. Ratios of Consecutive Outputs Constant ──────> EXPONENTIAL (y = a · b^x)

Function Family Standard Equation Graphical Shape Tabular Identification Rule Long-Term Rate of Growth

Linear f ( x ) = m x + b f(x) = mx + b f ( x ) = m x + b Straight line Constant 1st differences ( Δ y = c \Delta y = c Δ y = c ) Constant additive rate

Quadratic f ( x ) = a x 2 + b x + c f(x) = ax^2 + bx + c f ( x ) = a x 2 + b x + c U-shaped parabola Constant 2nd differences ( Δ 2 y = c \Delta^2 y = c Δ 2 y = c ) Accelerated polynomial growth

Exponential f ( x ) = a ⋅ b x f(x) = a \cdot b^x f ( x ) = a ⋅ b x J-shaped exponential curve Constant ratios ( y k + 1 y k = b \frac{y_{k+1}}{y_k} = b y k ​ y k + 1 ​ ​ = b ) Dominates all polynomial growth

Step-by-Step Tabular Analysis Example

Analyze the data table below where x x x increases by uniform steps of 1 1 1 :

x x x y y y 1st Differences ( Δ y \Delta y Δ y ) 2nd Differences ( Δ 2 y \Delta^2 y Δ 2 y ) Output Ratio ( y k + 1 y k \frac{y_{k+1}}{y_k} y k ​ y k + 1 ​ ​ )

  • 0 0 0 5 5 5 — — —
  • 1 1 1 11 11 11 11 − 5 = 6 11 - 5 = \mathbf{6} 11 − 5 = 6 — 11 / 5 = 2.20 11 / 5 = 2.20 11/5 = 2.20

2 2 2 21 21 21 21 − 11 = 10 21 - 11 = \mathbf{10} 21 − 11 = 10 10 − 6 = 4 10 - 6 = \mathbf{4} 10 − 6 = 4 21 / 11 ≈ 1.91 21 / 11 \approx 1.91 21/11 ≈ 1.91

3 3 3 35 35 35 35 − 21 = 14 35 - 21 = \mathbf{14} 35 − 21 = 14 14 − 10 = 4 14 - 10 = \mathbf{4} 14 − 10 = 4 35 / 21 ≈ 1.67 35 / 21 \approx 1.67 35/21 ≈ 1.67

4 4 4 53 53 53 53 − 35 = 18 53 - 35 = \mathbf{18} 53 − 35 = 18 18 − 14 = 4 18 - 14 = \mathbf{4} 18 − 14 = 4 53 / 35 ≈ 1.51 53 / 35 \approx 1.51 53/35 ≈ 1.51

First differences: 6 , 10 , 14 , 18 6, 10, 14, 18 6 , 10 , 14 , 18 (Not constant ⟹ \implies ⟹ Not linear).

Second differences: 4 , 4 , 4 4, 4, 4 4 , 4 , 4 ( Constant + 4 ⟹ +4 \implies + 4 ⟹ Quadratic Function ).

Ratios: 2.20 , 1.91 , 1.67 , 1.51 2.20, 1.91, 1.67, 1.51 2.20 , 1.91 , 1.67 , 1.51 (Not constant ⟹ \implies ⟹ Not exponential).

Conclusion: The data are governed by a quadratic function (specifically y = 2 x 2 + 4 x + 5 y = 2x^2 + 4x + 5 y = 2 x 2 + 4 x + 5 ).

5. The Principle of Exponential Dominance

A fundamental mathematical property tested on the TABE is that an exponential growth function with base b > 1 b > 1 b > 1 will eventually exceed any linear or polynomial function , regardless of how large the linear slope or polynomial coefficient may be.

x x x Linear: L ( x ) = 500 x L(x) = 500x L ( x ) = 500 x Quadratic: Q ( x ) = 5 x 2 Q(x) = 5x^2 Q ( x ) = 5 x 2 Exponential: E ( x ) = 2 x E(x) = 2^x E ( x ) = 2 x

  • 1 1 1 500 500 500 5 5 5 2 2 2
  • 5 5 5 2 , 500 2,500 2 , 500 125 125 125 32 32 32
  • 10 10 10 5 , 000 5,000 5 , 000 500 500 500 1 , 024 1,024 1 , 024
  • 15 15 15 7 , 500 7,500 7 , 500 1 , 125 1,125 1 , 125 32 , 768 32,768 32 , 768 (Exceeds Linear!)

20 20 20 10 , 000 10,000 10 , 000 2 , 000 2,000 2 , 000 1 , 048 , 576 1,048,576 1 , 048 , 576 (Exceeds Quadratic by 500x!)

Loading diagram... Function Family Identification & Exponential Modeling Flowchart