Study guide

9.7 Line Plots, Dot Plots, & Picture Graphs

TABE Mathematics Exam

Track your progress as you read

Finished sections get a check mark.

1 Exam Structure, Administration, Locator & NRS Scoring

1.1 TABE 13&14 Mathematics: Levels, Structure, & Administration 1.2 Scale Scores, NRS Levels, Out-of-Range Flags, & Measurable Skills Gains

2 Chapter 2: Number Operations in Base Ten & Number Systems

2.1 Whole Number Place Value, Multi-Digit Arithmetic, & Estimation 2.2 Decimal Operations, Place Value, & Practical Applications 2.3 Factors, Multiples, Divisibility Rules, & Prime Factorization 2.4 Meanings of Multiplication and Division: Equal Groups, Arrays, & Multiplicative Comparison 2.5 One-Step and Two-Step Word Problems with Unknown Quantities

3 Chapter 3: Fractions, Rational Numbers, & Signed Integers

3.1 Fraction Fundamentals, Equivalence, & Mixed Numbers 3.2 Fraction Arithmetic: Adding, Subtracting, Multiplying, & Dividing 3.3 Integers, Absolute Value, & Signed Rational Number Operations 3.4 Fraction Multiplication as Scaling, Unit-Fraction Division, & Fractions in Measurement

4 Chapter 4: Ratios, Proportions, & Percents

4.1 Ratios, Rates, Unit Rates, & Proportional Relationships 4.2 Percents: Triad Conversions, Percent Equations, & Base Calculations 4.3 Real-World Percent Applications: Tax, Discounts, Markups, Interest, & Percent Change 4.4 Ratio Reasoning with Tables, Tape Diagrams, & Double Number Lines

5 Chapter 5: Expressions and Algebraic Thinking

5.1 Arithmetic Patterns, Variables, & Translating Algebraic Expressions 5.2 Evaluating Expressions, Order of Operations, & Properties of Operations 5.3 Exponents, Square & Cube Roots, Radicals, & Scientific Notation 5.4 Independent and Dependent Variables, Tables, & Two-Quantity Relationships 5.5 Equivalent Expressions, Expression Structure, & Justifying Every Step 5.6 Radicals, Rational Exponents, & Approximating Irrational Numbers

6 Chapter 6: Equations and Inequalities

6.1 Solving One-Step & Two-Step Linear Equations 6.2 Multi-Step Equations, Variables on Both Sides, & Special Solution Sets 6.3 Linear Inequalities: Solving, Graphing on Number Lines, & Word Problems 6.4 Systems of Linear Equations: Graphing, Substitution, & Elimination Methods 6.5 Literal Equations & Rearranging Formulas 6.6 Creating Equations, Inequalities, & Constraint Models

7 Chapter 7: Advanced Algebra & Quadratic Equations

7.1 Polynomial Operations: Addition, Subtraction, & Multiplication 7.2 Factoring Polynomials & Solving Quadratic Equations by Factoring 7.3 The Quadratic Formula, Completing the Square, & Graphs of Quadratics

8 Chapter 8: Functions & Mathematical Modeling

8.1 Function Fundamentals, Notation, Domain, & Range 8.2 Linear Functions: Slope, Rate of Change, & Linear Equations 8.3 Exponential Growth & Decay Models, & Comparing Function Families 8.4 Building Functions & Interpreting Parameters in Context 8.5 Average Rate of Change, Qualitative Graphs, & Comparing Representations

9 Chapter 9: Measurement, Unit Conversions, & Statistical Displays

9.1 Customary & Metric Unit Conversions and Dimensional Analysis 9.2 Frequency Tables, Bar Graphs, Line Graphs, & Histograms 9.3 Measures of Central Tendency & Statistical Dispersion 9.4 Five-Number Summaries, Box Plots, & Bivariate Scatter Plots 9.5 Telling Time, Elapsed Time, & Money Calculations 9.6 Measuring and Estimating Length, Mass, & Liquid Volume 9.7 Line Plots, Dot Plots, & Picture Graphs 9.8 Units, Quantities, Precision, & Appropriate Accuracy

10 Chapter 10: Probability & Statistical Inferences

10.1 Theoretical vs. Experimental Probability, Sample Spaces, & Single-Event Outcomes 10.2 Compound Probability: Independent Events, Dependent Events, & Addition Rules 10.3 Sampling Techniques, Bias, & Making Population Inferences 10.4 Statistical Questions, Variability, & Describing Distributions 10.5 Probability Models, Relative Frequency, & Simulation

11 Chapter 11: Two-Dimensional Geometry & Spatial Reasoning

11.1 Geometric Fundamentals: Points, Lines, Angles, Angle Relationships, & Polygons 11.2 Perimeter of Polygons, Circle Anatomy, & Circumference Calculations 11.3 Area Formulas & Area of Composite Figures 11.4 Angle Measurement, Protractors, & Angle Addition 11.5 Classifying Two-Dimensional Figures & Partitioning Shapes into Equal Parts 11.6 Area by Tiling, Unit Squares, & the Distributive Property of Area

12 Chapter 12: Three-Dimensional Geometry, Coordinate Geometry, & Right Triangles

12.1 Volume and Surface Area of 3D Solids 12.2 Coordinate Geometry: Distance, Midpoint, & Geometric Transformations 12.3 The Pythagorean Theorem, Geometric Similarity, & Indirect Measurement 12.4 Volume by Unit Cubes & Additive Volume of Composite Solids 12.5 The Coordinate Plane: Plotting Points, Quadrants, & Polygons on the Grid 12.6 Density & Geometric Modeling

9.7 Line Plots, Dot Plots, & Picture Graphs

Key Takeaways Explain This Topic AI

A line plot (dot plot) marks each data value with an X or dot above a number line, so the height of a stack is the frequency of that exact value.

Line plots on TABE frequently use fractional scales in halves, quarters, and eighths of an inch, which turns a graph-reading item into a fraction-arithmetic item.

A picture graph uses a symbol to stand for several units, and the key tells you the multiplier — half a symbol means half of that value.

A scaled bar graph must be read from its axis scale, not from the number of gridlines, because each interval may represent 2, 5, 10, or more units.

Last updated: August 2026

Line Plots, Dot Plots, & Picture Graphs

Section 9.2 covered frequency tables, bar graphs, line graphs, and histograms. The DRC specification also assigns three displays specifically to the lower levels: picture graphs and scaled bar graphs with several categories, and line plots — including line plots "marked off in appropriate units — whole numbers, halves, or quarters" and, at Level M, in eighths of an inch.

Line Plots (Dot Plots)

A line plot , also called a dot plot , places a number line horizontally and stacks one mark for each data value directly above its position. Number of overtime hours worked last week (14 employees)

  • X
  • X X
  • X X X
  • X X X X X X
  • ──┼────┼────┼────┼───┼────┼──
  • 0 1 2 3 4 5

Reading it:

  • Question Method Answer
  • How many employees worked exactly 2 hours? count the stack above 2 4
  • How many employees in total? count all marks 14
  • What is the mode? tallest stack 2 hours
  • What is the range? largest minus smallest 5 − 0 = 5 5 - 0 = 5 5 − 0 = 5 hours
  • How many worked more than 3 hours? stacks above 4 and 5 2 + 1 = 3 2 + 1 = 3 2 + 1 = 3

Total overtime hours paid? ∑ ( value × frequency ) \sum (\text{value} \times \text{frequency}) ∑ ( value × frequency ) 0 ( 2 ) + 1 ( 1 ) + 2 ( 4 ) + 3 ( 1 ) + 4 ( 2 ) + 5 ( 1 ) = 26 0(2)+1(1)+2(4)+3(1)+4(2)+5(1) = 26 0 ( 2 ) + 1 ( 1 ) + 2 ( 4 ) + 3 ( 1 ) + 4 ( 2 ) + 5 ( 1 ) = 26

The most-missed line-plot question asks for the total of the values , not the number of data points. Two employees at 4 hours contribute 8 hours, not 2. Multiply each value by the height of its stack, then add.

Line Plots With Fractional Scales

This is the version TABE actually favors, because it tests fractions and graph reading at once. Lengths of 12 bolts, measured to the nearest 1/8 inch

  • X
  • X X
  • X X X X X X
  • ──┼────┼────┼────┼────┼────┼──
  • 1½ 1⅝ 1¾ 1⅞ 2 2⅛

Two skills combine here:

Read the scale. Between 1 1 2 1\frac{1}{2} 1 2 1 ​ and 2 there are four spaces, so each tick is 1 8 \frac{1}{8} 8 1 ​ inch.

Compute with the values. "What is the difference between the longest and shortest bolt?" is 2 1 8 − 1 1 2 = 2 1 8 − 1 4 8 = 5 8 2\frac{1}{8} - 1\frac{1}{2} = 2\frac{1}{8} - 1\frac{4}{8} = \frac{5}{8} 2 8 1 ​ − 1 2 1 ​ = 2 8 1 ​ − 1 8 4 ​ = 8 5 ​ inch.

Worked total. "What is the combined length of all the bolts measuring 2 inches?" Two marks sit above 2, so 2 × 2 = 4 2 \times 2 = 4 2 × 2 = 4 inches.

Worked redistribution. "If all the liquid in the beakers were redistributed equally, how much would each hold?" That question is asking for the mean : total the values, divide by the number of data points. TABE words it as redistribution rather than as "mean," and learners who do not recognize the phrasing lose the item.

Picture Graphs (Pictographs)

A picture graph uses a repeated symbol, and the key states what one symbol represents. Books checked out (Key: 📕 = 10 books)

  • Monday 📕📕📕📕
  • Tuesday 📕📕📕📕📕📕
  • Wednesday 📕📕📕◗ (◗ = half symbol)
  • Thursday 📕📕📕📕📕
  • Day Symbols Books
  • Monday 4 40
  • Tuesday 6 60
  • Wednesday 3½ 35
  • Thursday 5 50

The two rules:

Always read the key first. The same picture graph means completely different things with a key of 10 versus a key of 100.

A partial symbol is a fraction of the key value. Half a book symbol with a key of 10 is 5 books, not 1.

Typical questions: How many more books on Tuesday than Wednesday? 60 − 35 = 25 60 - 35 = 25 60 − 35 = 25 . How many books in all four days? 40 + 60 + 35 + 50 = 185 40 + 60 + 35 + 50 = 185 40 + 60 + 35 + 50 = 185 .

Scaled Bar Graphs

A scaled bar graph labels its axis in steps larger than 1. Read the scale before reading any bar.

  • If the axis is labeled… one gridline is… a bar reaching 3 gridlines is…
  • 0, 5, 10, 15 with 1 line each 5 15
  • 0, 10, 20, 30 with 2 lines each 5 15
  • 0, 20, 40, 60 with 4 lines each 5 15

The bars look identical; only the axis distinguishes them. TABE writes distractors by scaling the answer as if the axis stepped by 1.

Bars that end between gridlines are estimated to the nearest half interval. If gridlines are 10 apart and a bar ends midway between 30 and 40, report about 35.

Choosing the Right Display

  • Display Best when
  • Line plot / dot plot small data set, want to see every individual value and its repeats
  • Picture graph comparing a few categories for a general audience
  • Scaled bar graph comparing categories with large counts
  • Histogram continuous numerical data grouped into intervals (see Section 9.2)

The distinction TABE tests most often is bar graph versus histogram : bar graphs display separated categories and their bars have gaps; histograms display continuous intervals and their bars touch.