Study guide

2.2 Decimal Operations, Place Value, & Practical Applications

TABE Mathematics Exam

Track your progress as you read

Finished sections get a check mark.

1 Exam Structure, Administration, Locator & NRS Scoring

1.1 TABE 13&14 Mathematics: Levels, Structure, & Administration 1.2 Scale Scores, NRS Levels, Out-of-Range Flags, & Measurable Skills Gains

2 Chapter 2: Number Operations in Base Ten & Number Systems

2.1 Whole Number Place Value, Multi-Digit Arithmetic, & Estimation 2.2 Decimal Operations, Place Value, & Practical Applications 2.3 Factors, Multiples, Divisibility Rules, & Prime Factorization 2.4 Meanings of Multiplication and Division: Equal Groups, Arrays, & Multiplicative Comparison 2.5 One-Step and Two-Step Word Problems with Unknown Quantities

3 Chapter 3: Fractions, Rational Numbers, & Signed Integers

3.1 Fraction Fundamentals, Equivalence, & Mixed Numbers 3.2 Fraction Arithmetic: Adding, Subtracting, Multiplying, & Dividing 3.3 Integers, Absolute Value, & Signed Rational Number Operations 3.4 Fraction Multiplication as Scaling, Unit-Fraction Division, & Fractions in Measurement

4 Chapter 4: Ratios, Proportions, & Percents

4.1 Ratios, Rates, Unit Rates, & Proportional Relationships 4.2 Percents: Triad Conversions, Percent Equations, & Base Calculations 4.3 Real-World Percent Applications: Tax, Discounts, Markups, Interest, & Percent Change 4.4 Ratio Reasoning with Tables, Tape Diagrams, & Double Number Lines

5 Chapter 5: Expressions and Algebraic Thinking

5.1 Arithmetic Patterns, Variables, & Translating Algebraic Expressions 5.2 Evaluating Expressions, Order of Operations, & Properties of Operations 5.3 Exponents, Square & Cube Roots, Radicals, & Scientific Notation 5.4 Independent and Dependent Variables, Tables, & Two-Quantity Relationships 5.5 Equivalent Expressions, Expression Structure, & Justifying Every Step 5.6 Radicals, Rational Exponents, & Approximating Irrational Numbers

6 Chapter 6: Equations and Inequalities

6.1 Solving One-Step & Two-Step Linear Equations 6.2 Multi-Step Equations, Variables on Both Sides, & Special Solution Sets 6.3 Linear Inequalities: Solving, Graphing on Number Lines, & Word Problems 6.4 Systems of Linear Equations: Graphing, Substitution, & Elimination Methods 6.5 Literal Equations & Rearranging Formulas 6.6 Creating Equations, Inequalities, & Constraint Models

7 Chapter 7: Advanced Algebra & Quadratic Equations

7.1 Polynomial Operations: Addition, Subtraction, & Multiplication 7.2 Factoring Polynomials & Solving Quadratic Equations by Factoring 7.3 The Quadratic Formula, Completing the Square, & Graphs of Quadratics

8 Chapter 8: Functions & Mathematical Modeling

8.1 Function Fundamentals, Notation, Domain, & Range 8.2 Linear Functions: Slope, Rate of Change, & Linear Equations 8.3 Exponential Growth & Decay Models, & Comparing Function Families 8.4 Building Functions & Interpreting Parameters in Context 8.5 Average Rate of Change, Qualitative Graphs, & Comparing Representations

9 Chapter 9: Measurement, Unit Conversions, & Statistical Displays

9.1 Customary & Metric Unit Conversions and Dimensional Analysis 9.2 Frequency Tables, Bar Graphs, Line Graphs, & Histograms 9.3 Measures of Central Tendency & Statistical Dispersion 9.4 Five-Number Summaries, Box Plots, & Bivariate Scatter Plots 9.5 Telling Time, Elapsed Time, & Money Calculations 9.6 Measuring and Estimating Length, Mass, & Liquid Volume 9.7 Line Plots, Dot Plots, & Picture Graphs 9.8 Units, Quantities, Precision, & Appropriate Accuracy

10 Chapter 10: Probability & Statistical Inferences

10.1 Theoretical vs. Experimental Probability, Sample Spaces, & Single-Event Outcomes 10.2 Compound Probability: Independent Events, Dependent Events, & Addition Rules 10.3 Sampling Techniques, Bias, & Making Population Inferences 10.4 Statistical Questions, Variability, & Describing Distributions 10.5 Probability Models, Relative Frequency, & Simulation

11 Chapter 11: Two-Dimensional Geometry & Spatial Reasoning

11.1 Geometric Fundamentals: Points, Lines, Angles, Angle Relationships, & Polygons 11.2 Perimeter of Polygons, Circle Anatomy, & Circumference Calculations 11.3 Area Formulas & Area of Composite Figures 11.4 Angle Measurement, Protractors, & Angle Addition 11.5 Classifying Two-Dimensional Figures & Partitioning Shapes into Equal Parts 11.6 Area by Tiling, Unit Squares, & the Distributive Property of Area

12 Chapter 12: Three-Dimensional Geometry, Coordinate Geometry, & Right Triangles

12.1 Volume and Surface Area of 3D Solids 12.2 Coordinate Geometry: Distance, Midpoint, & Geometric Transformations 12.3 The Pythagorean Theorem, Geometric Similarity, & Indirect Measurement 12.4 Volume by Unit Cubes & Additive Volume of Composite Solids 12.5 The Coordinate Plane: Plotting Points, Quadrants, & Polygons on the Grid 12.6 Density & Geometric Modeling

2.2 Decimal Operations, Place Value, & Practical Applications

Key Takeaways Explain This Topic AI

Decimal place values decrease by powers of 10 moving right from tenths (0.1) through ten-thousandths (0.0001), with the word 'and' designating the decimal point.

Addition and subtraction require strict vertical alignment of decimal points and annexing placeholder zeros to match place lengths.

Multiplication requires multiplying numbers as whole integers and placing the decimal point so the product has the total sum of decimal places from all factors.

Decimal division requires multiplying both divisor and dividend by powers of 10 to turn the divisor into a whole number before computing.

Last updated: August 2026

2.2 Decimal Operations, Place Value, & Practical Applications

Decimals represent fractional quantities using the base-10 positional system. On the TABE 13&14 Mathematics examination, decimal competency is essential for solving applied workplace problems involving currency, hourly wages, payroll taxes, physical measurements, and unit pricing comparisons.

Decimal Place Value System & Representations

Every position to the right of the decimal point represents a negative power of 10 10 10 (a fractional part with a denominator of 10 , 100 , 1 , 000 , 10, 100, 1,000, 10 , 100 , 1 , 000 , etc.).

  • Position Name Fractional Value Decimal Value Power of 10 Example Digit ( 347.2815 347.2815 347.2815 )
  • Tens 10 10 10 10 10 10 10 1 10^1 1 0 1 4 4 4
  • Ones 1 1 1 1 1 1 10 0 10^0 1 0 0 7 7 7

(Decimal Point) - . - .

  • Tenths 1 10 \frac{1}{10} 10 1 ​ 0.1 0.1 0.1 10 − 1 10^{-1} 1 0 − 1 2 2 2 ( 0.2 0.2 0.2 )
  • Hundredths 1 100 \frac{1}{100} 100 1 ​ 0.01 0.01 0.01 10 − 2 10^{-2} 1 0 − 2 8 8 8 ( 0.08 0.08 0.08 )

Thousandths 1 1 , 000 \frac{1}{1,000} 1 , 000 1 ​ 0.001 0.001 0.001 10 − 3 10^{-3} 1 0 − 3 1 1 1 ( 0.001 0.001 0.001 )

Ten-Thousandths 1 10 , 000 \frac{1}{10,000} 10 , 000 1 ​ 0.0001 0.0001 0.0001 10 − 4 10^{-4} 1 0 − 4 5 5 5 ( 0.0005 0.0005 0.0005 )

Reading and Writing Decimals

To write a decimal in word form:

Read the whole number part to the left of the decimal point.

Read the decimal point as the word "and" .

Read the number to the right of the decimal point as a whole number, followed by the place name of the final digit.

Example: $347.2815$ is read as "Three hundred forty-seven and two thousand eight hundred fifteen ten-thousandths" .

  • Comparing, Ordering, & Rounding Decimals
  • Comparing Decimals Using Annexed Zeros

To compare decimals, align the decimal points and annex (pad) trailing zeros so all numbers have the same number of decimal places. Then compare digits from left to right.

Example: Compare 0.4 0.4 0.4 and 0.085 0.085 0.085 .

Annex zeros: 0.400 0.400 0.400 vs. 0.085 0.085 0.085 .

In the tenths place, 4 > 0 4 > 0 4 > 0 ; therefore, 0.4 > 0.085 0.4 > 0.085 0.4 > 0.085 (even though 85 > 4 85 > 4 85 > 4 as whole numbers).

Rounding Decimals

Locate the specified rounding place.

Look at the digit immediately to the right:

If the digit is 5 5 5 or greater , round up (add 1 1 1 to the target digit).

If the digit is 4 4 4 or less , round down (keep the target digit unchanged).

Drop all digits to the right of the target place (do not write trailing zeros after a rounded decimal unless specified for significant figures/cents).

Example: Round 18.4762 18.4762 18.4762 to:

Nearest Whole Number: 18.4762 → 4 ≤ 4 ⟹ 18 18.\mathbf{4}762 \to 4 \le 4 \implies \mathbf{18} 18. 4 762 → 4 ≤ 4 ⟹ 18

Nearest Tenth: 18.4762 → 7 ≥ 5 ⟹ 18.5 18.4\mathbf{7}62 \to 7 \ge 5 \implies \mathbf{18.5} 18.4 7 62 → 7 ≥ 5 ⟹ 18.5

Nearest Hundredth (Cent): 18.4762 → 6 ≥ 5 ⟹ 18.48 18.47\mathbf{6}2 \to 6 \ge 5 \implies \mathbf{18.48} 18.47 6 2 → 6 ≥ 5 ⟹ 18.48

Nearest Thousandth: 18.4762 → 2 ≤ 4 ⟹ 18.476 18.476\mathbf{2} \to 2 \le 4 \implies \mathbf{18.476} 18.476 2 → 2 ≤ 4 ⟹ 18.476

Decimal Addition & Subtraction

Important

The Golden Rule for Addition and Subtraction: Always line up the decimal points vertically so that tenths align with tenths, hundredths with hundredths, and ones with ones. Annex zeros to the right of shorter decimals to prevent subtraction errors.

Worked Example: Subtraction with Annexed Zeros

Problem: Compute 42.3 − 17.846 42.3 - 17.846 42.3 − 17.846 . 4 1 12 9 10 4̸ 2̸. 3̸ 0̸ 0̸ − 1 7. 8 4 6 2 4. 4 5 4 \begin{array}{rccccc}

  • & 4 & 1 & 12 & 9 & 10 \\
  • & \not{4} & \not{2} . & \not{3} & \not{0} & \not{0} \\
  • & 1 & 7 . & 8 & 4 & 6 \\
  • \hline
  • & \mathbf{2} & \mathbf{4} . & \mathbf{4} & \mathbf{5} & \mathbf{4}
  • \end{array} − ​ 4  4 1 2 ​ 1  2 . 7. 4 . ​ 12  3 8 4 ​ 9  0 4 5 ​ 10  0 6 4 ​ ​

Annex two zeros to 42.3 42.3 42.3 to make 42.300 42.300 42.300 .

Align decimal points and borrow across digits: 10 − 6 = 4 10 - 6 = 4 10 − 6 = 4 ; 9 − 4 = 5 9 - 4 = 5 9 − 4 = 5 ; 12 − 8 = 4 12 - 8 = 4 12 − 8 = 4 ; 11 − 7 = 4 11 - 7 = 4 11 − 7 = 4 ; 3 − 1 = 2 3 - 1 = 2 3 − 1 = 2 .

Bring the decimal point straight down: 24.454 24.454 24.454 .

Decimal Multiplication Algorithm

When multiplying decimals, do NOT line up decimal points. Follow this three-step algorithm:

Multiply the numbers as if they were whole integers (ignoring decimal points).

Count the total number of decimal places to the right of the decimal points across all factors.

Starting from the extreme right of the product, move the decimal point to the left by that total count.

Worked Example: Decimal Multiplication

Problem: Compute 3.45 × 0.28 3.45 \times 0.28 3.45 × 0.28 . × 3.45 ( 2 decimal places ) × 3 0.28 ( 2 decimal places ) 0 2760 ( 345 × 8 ) + 0 6900 ( 345 × 20 ) 0 0.9660 ( 4 decimal places ⟹ 0.966 ) \begin{aligned}

  • &\phantom{\times} 3.45 \quad (2\text{ decimal places}) \\
  • \times &\phantom{3} 0.28 \quad (2\text{ decimal places}) \\
  • \hline
  • &\phantom{0} 2760 \quad (345 \times 8) \\
  • + &\phantom{0} 6900 \quad (345 \times 20) \\
  • \hline
  • &\phantom{0} \mathbf{0.9660} \quad (4\text{ decimal places} \implies \mathbf{0.966})

\end{aligned} × + ​ × 3.45 ( 2 decimal places ) 3 0.28 ( 2 decimal places ) 0 2760 ( 345 × 8 ) 0 6900 ( 345 × 20 ) 0 0.9660 ( 4 decimal places ⟹ 0.966 ) ​ ​

Total decimal places needed: 2 + 2 = 4 2 + 2 = 4 2 + 2 = 4 decimal places.

Count 4 4 4 positions left from the right of 9660 9660 9660 : 0.9660 = 0.966 0.9660 = \mathbf{0.966} 0.9660 = 0.966 .

Decimal Division Algorithm

To divide when the divisor is a decimal:

Make the divisor a whole number: Shift the divisor's decimal point all the way to the right until it is an integer. Count how many places k k k you shifted.

Shift the dividend by the same amount: Shift the dividend's decimal point k k k places to the right (annexing zeros if necessary).

Place the decimal point in the quotient: Bring the decimal point directly straight up into the quotient space above the dividend.

  • Divide using standard whole-number long division. 3 4 . 5 <-- Decimal placed straight up
  • __________________
  • 1.4 ) 4 8 . 3 0 ==> 14 ) 4 8 3 . 0
  • 4 2
  • --
  • 6 3
  • 5 6
  • --
  • 7 0
  • 7 0
  • --
  • 0

Problem: 48.3 ÷ 1.4 = 483 ÷ 14 = 34.5 48.3 \div 1.4 = 483 \div 14 = \mathbf{34.5} 48.3 ÷ 1.4 = 483 ÷ 14 = 34.5 .

  • Practical Workplace & Applied Math Scenarios
  • 1. Hourly Wages and Overtime Pay

Under standard workplace rules, overtime hours (exceeding 40 40 40 hours per week) are compensated at "time-and-a-half" ( 1.5 × base hourly wage 1.5 \times \text{base hourly wage} 1.5 × base hourly wage ). Total Earnings = ( 40 × Hourly Wage ) + ( Overtime Hours × 1.5 × Hourly Wage ) \text{Total Earnings} = (40 \times \text{Hourly Wage}) + (\text{Overtime Hours} \times 1.5 \times \text{Hourly Wage}) Total Earnings = ( 40 × Hourly Wage ) + ( Overtime Hours × 1.5 × Hourly Wage )

Example: An employee earns $ 18.40 \text{\textdollar}18.40 $ 18.40 per hour and works 46.5 46.5 46.5 hours in a week.

Regular earnings: 40 × $ 18.40 = $ 736.00 40 \times \text{\textdollar}18.40 = \text{\textdollar}736.00 40 × $ 18.40 = $ 736.00

Overtime wage rate: 1.5 × $ 18.40 = $ 27.60 1.5 \times \text{\textdollar}18.40 = \text{\textdollar}27.60 1.5 × $ 18.40 = $ 27.60 per hour

Overtime hours: 46.5 − 40 = 6.5 46.5 - 40 = 6.5 46.5 − 40 = 6.5 hours

Overtime earnings: 6.5 × $ 27.60 = $ 179.40 6.5 \times \text{\textdollar}27.60 = \text{\textdollar}179.40 6.5 × $ 27.60 = $ 179.40

Total gross pay: $ 736.00 + $ 179.40 = $ 915.40 \text{\textdollar}736.00 + \text{\textdollar}179.40 = \mathbf{\text{\textdollar}915.40} $ 736.00 + $ 179.40 = $ 915.40

2. Unit Pricing & Best Value Analysis

To determine the most economical purchase, calculate the unit cost by dividing total price by total quantity: Unit Price = Total Cost Quantity / Volume \text{Unit Price} = \frac{\text{Total Cost}}{\text{Quantity / Volume}} Unit Price = Quantity / Volume Total Cost ​

Brand Option Package Size Package Cost Unit Price Calculation Unit Cost (per oz)

Brand A 16 oz 16\text{ oz} 16 oz $ 4.48 \text{\textdollar}4.48 $ 4.48 $ 4.48 ÷ 16 \text{\textdollar}4.48 \div 16 $ 4.48 ÷ 16 $ 0.280 \mathbf{\text{\textdollar}0.280} $ 0.280

Brand B 24 oz 24\text{ oz} 24 oz $ 6.24 \text{\textdollar}6.24 $ 6.24 $ 6.24 ÷ 24 \text{\textdollar}6.24 \div 24 $ 6.24 ÷ 24 $ 0.260 \mathbf{\text{\textdollar}0.260} $ 0.260 (Best Value)

Brand C 32 oz 32\text{ oz} 32 oz $ 8.96 \text{\textdollar}8.96 $ 8.96 $ 8.96 ÷ 32 \text{\textdollar}8.96 \div 32 $ 8.96 ÷ 32 $ 0.280 \mathbf{\text{\textdollar}0.280} $ 0.280