Study guide

10.5 Probability Models, Relative Frequency, & Simulation

TABE Mathematics Exam

Track your progress as you read

Finished sections get a check mark.

1 Exam Structure, Administration, Locator & NRS Scoring

1.1 TABE 13&14 Mathematics: Levels, Structure, & Administration 1.2 Scale Scores, NRS Levels, Out-of-Range Flags, & Measurable Skills Gains

2 Chapter 2: Number Operations in Base Ten & Number Systems

2.1 Whole Number Place Value, Multi-Digit Arithmetic, & Estimation 2.2 Decimal Operations, Place Value, & Practical Applications 2.3 Factors, Multiples, Divisibility Rules, & Prime Factorization 2.4 Meanings of Multiplication and Division: Equal Groups, Arrays, & Multiplicative Comparison 2.5 One-Step and Two-Step Word Problems with Unknown Quantities

3 Chapter 3: Fractions, Rational Numbers, & Signed Integers

3.1 Fraction Fundamentals, Equivalence, & Mixed Numbers 3.2 Fraction Arithmetic: Adding, Subtracting, Multiplying, & Dividing 3.3 Integers, Absolute Value, & Signed Rational Number Operations 3.4 Fraction Multiplication as Scaling, Unit-Fraction Division, & Fractions in Measurement

4 Chapter 4: Ratios, Proportions, & Percents

4.1 Ratios, Rates, Unit Rates, & Proportional Relationships 4.2 Percents: Triad Conversions, Percent Equations, & Base Calculations 4.3 Real-World Percent Applications: Tax, Discounts, Markups, Interest, & Percent Change 4.4 Ratio Reasoning with Tables, Tape Diagrams, & Double Number Lines

5 Chapter 5: Expressions and Algebraic Thinking

5.1 Arithmetic Patterns, Variables, & Translating Algebraic Expressions 5.2 Evaluating Expressions, Order of Operations, & Properties of Operations 5.3 Exponents, Square & Cube Roots, Radicals, & Scientific Notation 5.4 Independent and Dependent Variables, Tables, & Two-Quantity Relationships 5.5 Equivalent Expressions, Expression Structure, & Justifying Every Step 5.6 Radicals, Rational Exponents, & Approximating Irrational Numbers

6 Chapter 6: Equations and Inequalities

6.1 Solving One-Step & Two-Step Linear Equations 6.2 Multi-Step Equations, Variables on Both Sides, & Special Solution Sets 6.3 Linear Inequalities: Solving, Graphing on Number Lines, & Word Problems 6.4 Systems of Linear Equations: Graphing, Substitution, & Elimination Methods 6.5 Literal Equations & Rearranging Formulas 6.6 Creating Equations, Inequalities, & Constraint Models

7 Chapter 7: Advanced Algebra & Quadratic Equations

7.1 Polynomial Operations: Addition, Subtraction, & Multiplication 7.2 Factoring Polynomials & Solving Quadratic Equations by Factoring 7.3 The Quadratic Formula, Completing the Square, & Graphs of Quadratics

8 Chapter 8: Functions & Mathematical Modeling

8.1 Function Fundamentals, Notation, Domain, & Range 8.2 Linear Functions: Slope, Rate of Change, & Linear Equations 8.3 Exponential Growth & Decay Models, & Comparing Function Families 8.4 Building Functions & Interpreting Parameters in Context 8.5 Average Rate of Change, Qualitative Graphs, & Comparing Representations

9 Chapter 9: Measurement, Unit Conversions, & Statistical Displays

9.1 Customary & Metric Unit Conversions and Dimensional Analysis 9.2 Frequency Tables, Bar Graphs, Line Graphs, & Histograms 9.3 Measures of Central Tendency & Statistical Dispersion 9.4 Five-Number Summaries, Box Plots, & Bivariate Scatter Plots 9.5 Telling Time, Elapsed Time, & Money Calculations 9.6 Measuring and Estimating Length, Mass, & Liquid Volume 9.7 Line Plots, Dot Plots, & Picture Graphs 9.8 Units, Quantities, Precision, & Appropriate Accuracy

10 Chapter 10: Probability & Statistical Inferences

10.1 Theoretical vs. Experimental Probability, Sample Spaces, & Single-Event Outcomes 10.2 Compound Probability: Independent Events, Dependent Events, & Addition Rules 10.3 Sampling Techniques, Bias, & Making Population Inferences 10.4 Statistical Questions, Variability, & Describing Distributions 10.5 Probability Models, Relative Frequency, & Simulation

11 Chapter 11: Two-Dimensional Geometry & Spatial Reasoning

11.1 Geometric Fundamentals: Points, Lines, Angles, Angle Relationships, & Polygons 11.2 Perimeter of Polygons, Circle Anatomy, & Circumference Calculations 11.3 Area Formulas & Area of Composite Figures 11.4 Angle Measurement, Protractors, & Angle Addition 11.5 Classifying Two-Dimensional Figures & Partitioning Shapes into Equal Parts 11.6 Area by Tiling, Unit Squares, & the Distributive Property of Area

12 Chapter 12: Three-Dimensional Geometry, Coordinate Geometry, & Right Triangles

12.1 Volume and Surface Area of 3D Solids 12.2 Coordinate Geometry: Distance, Midpoint, & Geometric Transformations 12.3 The Pythagorean Theorem, Geometric Similarity, & Indirect Measurement 12.4 Volume by Unit Cubes & Additive Volume of Composite Solids 12.5 The Coordinate Plane: Plotting Points, Quadrants, & Polygons on the Grid 12.6 Density & Geometric Modeling

10.5 Probability Models, Relative Frequency, & Simulation

Key Takeaways Explain This Topic AI

A probability model lists every outcome in the sample space and assigns each a probability, and those probabilities must sum to exactly 1.

A uniform model assigns equal probability to every outcome; a non-uniform model assigns probabilities from observed frequencies or from the physical setup.

Approximating a probability by relative frequency means dividing observed successes by total trials, and the estimate improves as the number of trials grows.

When a model and observed frequencies disagree substantially, the explanation is either an unfair setup or too few trials — both are valid answers on TABE.

Last updated: August 2026

Probability Models, Relative Frequency, & Simulation

Section 10.1 computed theoretical and experimental probability. This section covers the standard that sits between them: build a probability model, then check it against reality. The DRC specification asks candidates to "develop a probability model and use it to find probabilities of events" and to "compare probabilities from a model to observed frequencies; if the agreement is not good, explain possible sources of the discrepancy."

What a Probability Model Is

A probability model is a complete list of the possible outcomes together with a probability for each. Two rules govern every model:

Each probability is between 0 and 1 , inclusive.

All the probabilities sum to exactly 1 .

If a set of numbers violates either rule, it is not a probability model — and TABE writes items that ask exactly that.

Uniform models

A uniform model gives every outcome the same probability. Rolling a fair six-sided die:

Outcome 1 2 3 4 5 6

Probability 1 6 \tfrac{1}{6} 6 1 ​ 1 6 \tfrac{1}{6} 6 1 ​ 1 6 \tfrac{1}{6} 6 1 ​ 1 6 \tfrac{1}{6} 6 1 ​ 1 6 \tfrac{1}{6} 6 1 ​ 1 6 \tfrac{1}{6} 6 1 ​

Sum: 6 × 1 6 = 1 6 \times \tfrac{1}{6} = 1 6 × 6 1 ​ = 1 . ✓

Any event's probability is then the sum of its outcomes' probabilities: P ( even ) = 1 6 + 1 6 + 1 6 = 1 2 P(\text{even}) = \tfrac{1}{6} + \tfrac{1}{6} + \tfrac{1}{6} = \tfrac{1}{2} P ( even ) = 6 1 ​ + 6 1 ​ + 6 1 ​ = 2 1 ​ .

Non-uniform models

Most real situations are not uniform. A spinner with unequal sectors, a bag with unequal counts, or a machine with a known defect rate all need probabilities assigned individually.

A bag holds 5 red, 3 blue, and 2 green chips.

Outcome Red Blue Green

Probability 5 10 = 0.5 \tfrac{5}{10} = 0.5 10 5 ​ = 0.5 3 10 = 0.3 \tfrac{3}{10} = 0.3 10 3 ​ = 0.3 2 10 = 0.2 \tfrac{2}{10} = 0.2 10 2 ​ = 0.2

Sum: 0.5 + 0.3 + 0.2 = 1 0.5 + 0.3 + 0.2 = 1 0.5 + 0.3 + 0.2 = 1 . ✓

Finding a missing probability. A model lists P ( A ) = 0.4 P(A) = 0.4 P ( A ) = 0.4 , P ( B ) = 0.25 P(B) = 0.25 P ( B ) = 0.25 , P ( C ) = ? P(C) = ? P ( C ) = ? , and those are the only outcomes. Since the total must be 1, P ( C ) = 1 − 0.4 − 0.25 = 0.35 P(C) = 1 - 0.4 - 0.25 = \mathbf{0.35} P ( C ) = 1 − 0.4 − 0.25 = 0.35 .

Building a Model From Observed Data

When the setup is unknown — an irregular spinner, an unfamiliar machine — you build the model from relative frequency : P ( outcome ) ≈ number of times it occurred total number of trials P(\text{outcome}) \approx \frac{\text{number of times it occurred}}{\text{total number of trials}} P ( outcome ) ≈ total number of trials number of times it occurred ​

A spinner is spun 200 times with these results:

  • Color Red Blue Yellow Green Total
  • Count 96 52 30 22 200
  • Relative frequency 0.48 0.26 0.15 0.11 1.00

The estimated model says red is nearly half the spinner's area, and green is about a tenth. Predicting forward: in 500 more spins, expect about 0.48 × 500 = 240 0.48 \times 500 = 240 0.48 × 500 = 240 reds.

Comparing Model to Observation

TABE's version of this standard presents a theoretical model and some observed data and asks whether they agree.

A coin is flipped 40 times and lands heads 24 times. The model says P ( heads ) = 0.5 P(\text{heads}) = 0.5 P ( heads ) = 0.5 , predicting 20 heads. Observed relative frequency is 24 ÷ 40 = 0.6 24 \div 40 = 0.6 24 ÷ 40 = 0.6 . Is the coin unfair?

Reasonable answers, in order of likelihood:

Ordinary random variation. Forty flips is a small sample; 24 heads is a common result for a fair coin.

The coin or the flipping process is biased. Possible, but 40 trials is not enough evidence.

A recording or counting error.

The same coin flipped 4,000 times landing heads 2,400 times is a very different matter. The relative frequency is identical at 0.6, but the sample is 100 times larger, and random variation is a far less plausible explanation. Sample size is what turns a discrepancy into evidence.

Sources of discrepancy to name

  • Source Description
  • Too few trials small samples fluctuate widely around the true probability
  • A faulty model the assumed probabilities do not match the real setup
  • A biased process a weighted die, a worn spinner, a mis-set machine
  • Non-independence outcomes influence one another, breaking the model's assumption
  • Measurement or recording error miscounts, missing trials
  • The Law of Large Numbers, Restated

As the number of trials grows, relative frequency converges toward true probability.

  • Trials Heads Relative frequency
  • 10 7 0.70
  • 100 58 0.58
  • 1,000 517 0.517
  • 10,000 5,032 0.5032

This is why an estimate built from 20 observations should be treated as a rough guide and one built from 2,000 as reliable — a judgment TABE asks about directly.

Simulation

A simulation models a real chance process with a simpler random device when the real situation is impractical to repeat.

Designing one takes four decisions:

Choose a device whose probabilities match the situation — a coin for 50/50, a die for sixths, digits 0–9 for tenths, slips in a hat for anything else.

Define what one trial represents.

Define success.

Run many trials and compute the relative frequency.

Problem. A store's promotion says 1 in 5 cups wins a prize. Simulate how often a customer buying 3 cups wins at least one.

Device: digits 0–9; let 0 and 1 mean "win" (that is 2 10 = 1 5 \tfrac{2}{10} = \tfrac{1}{5} 10 2 ​ = 5 1 ​ ) and 2–9 mean "lose."

One trial: three digits.

Success: at least one 0 or 1 among the three digits.

Run 100 trials, count successes, divide by 100.

The theoretical answer is 1 − ( 0.8 ) 3 = 1 − 0.512 = 0.488 1 - (0.8)^3 = 1 - 0.512 = 0.488 1 − ( 0.8 ) 3 = 1 − 0.512 = 0.488 , so a well-run simulation should land near 49%. Comparing your simulated result to that theoretical value is the same model-versus-observation reasoning applied to your own experiment.