Study guide

12.4 Volume by Unit Cubes & Additive Volume of Composite Solids

TABE Mathematics Exam

Track your progress as you read

Finished sections get a check mark.

1 Exam Structure, Administration, Locator & NRS Scoring

1.1 TABE 13&14 Mathematics: Levels, Structure, & Administration 1.2 Scale Scores, NRS Levels, Out-of-Range Flags, & Measurable Skills Gains

2 Chapter 2: Number Operations in Base Ten & Number Systems

2.1 Whole Number Place Value, Multi-Digit Arithmetic, & Estimation 2.2 Decimal Operations, Place Value, & Practical Applications 2.3 Factors, Multiples, Divisibility Rules, & Prime Factorization 2.4 Meanings of Multiplication and Division: Equal Groups, Arrays, & Multiplicative Comparison 2.5 One-Step and Two-Step Word Problems with Unknown Quantities

3 Chapter 3: Fractions, Rational Numbers, & Signed Integers

3.1 Fraction Fundamentals, Equivalence, & Mixed Numbers 3.2 Fraction Arithmetic: Adding, Subtracting, Multiplying, & Dividing 3.3 Integers, Absolute Value, & Signed Rational Number Operations 3.4 Fraction Multiplication as Scaling, Unit-Fraction Division, & Fractions in Measurement

4 Chapter 4: Ratios, Proportions, & Percents

4.1 Ratios, Rates, Unit Rates, & Proportional Relationships 4.2 Percents: Triad Conversions, Percent Equations, & Base Calculations 4.3 Real-World Percent Applications: Tax, Discounts, Markups, Interest, & Percent Change 4.4 Ratio Reasoning with Tables, Tape Diagrams, & Double Number Lines

5 Chapter 5: Expressions and Algebraic Thinking

5.1 Arithmetic Patterns, Variables, & Translating Algebraic Expressions 5.2 Evaluating Expressions, Order of Operations, & Properties of Operations 5.3 Exponents, Square & Cube Roots, Radicals, & Scientific Notation 5.4 Independent and Dependent Variables, Tables, & Two-Quantity Relationships 5.5 Equivalent Expressions, Expression Structure, & Justifying Every Step 5.6 Radicals, Rational Exponents, & Approximating Irrational Numbers

6 Chapter 6: Equations and Inequalities

6.1 Solving One-Step & Two-Step Linear Equations 6.2 Multi-Step Equations, Variables on Both Sides, & Special Solution Sets 6.3 Linear Inequalities: Solving, Graphing on Number Lines, & Word Problems 6.4 Systems of Linear Equations: Graphing, Substitution, & Elimination Methods 6.5 Literal Equations & Rearranging Formulas 6.6 Creating Equations, Inequalities, & Constraint Models

7 Chapter 7: Advanced Algebra & Quadratic Equations

7.1 Polynomial Operations: Addition, Subtraction, & Multiplication 7.2 Factoring Polynomials & Solving Quadratic Equations by Factoring 7.3 The Quadratic Formula, Completing the Square, & Graphs of Quadratics

8 Chapter 8: Functions & Mathematical Modeling

8.1 Function Fundamentals, Notation, Domain, & Range 8.2 Linear Functions: Slope, Rate of Change, & Linear Equations 8.3 Exponential Growth & Decay Models, & Comparing Function Families 8.4 Building Functions & Interpreting Parameters in Context 8.5 Average Rate of Change, Qualitative Graphs, & Comparing Representations

9 Chapter 9: Measurement, Unit Conversions, & Statistical Displays

9.1 Customary & Metric Unit Conversions and Dimensional Analysis 9.2 Frequency Tables, Bar Graphs, Line Graphs, & Histograms 9.3 Measures of Central Tendency & Statistical Dispersion 9.4 Five-Number Summaries, Box Plots, & Bivariate Scatter Plots 9.5 Telling Time, Elapsed Time, & Money Calculations 9.6 Measuring and Estimating Length, Mass, & Liquid Volume 9.7 Line Plots, Dot Plots, & Picture Graphs 9.8 Units, Quantities, Precision, & Appropriate Accuracy

10 Chapter 10: Probability & Statistical Inferences

10.1 Theoretical vs. Experimental Probability, Sample Spaces, & Single-Event Outcomes 10.2 Compound Probability: Independent Events, Dependent Events, & Addition Rules 10.3 Sampling Techniques, Bias, & Making Population Inferences 10.4 Statistical Questions, Variability, & Describing Distributions 10.5 Probability Models, Relative Frequency, & Simulation

11 Chapter 11: Two-Dimensional Geometry & Spatial Reasoning

11.1 Geometric Fundamentals: Points, Lines, Angles, Angle Relationships, & Polygons 11.2 Perimeter of Polygons, Circle Anatomy, & Circumference Calculations 11.3 Area Formulas & Area of Composite Figures 11.4 Angle Measurement, Protractors, & Angle Addition 11.5 Classifying Two-Dimensional Figures & Partitioning Shapes into Equal Parts 11.6 Area by Tiling, Unit Squares, & the Distributive Property of Area

12 Chapter 12: Three-Dimensional Geometry, Coordinate Geometry, & Right Triangles

12.1 Volume and Surface Area of 3D Solids 12.2 Coordinate Geometry: Distance, Midpoint, & Geometric Transformations 12.3 The Pythagorean Theorem, Geometric Similarity, & Indirect Measurement 12.4 Volume by Unit Cubes & Additive Volume of Composite Solids 12.5 The Coordinate Plane: Plotting Points, Quadrants, & Polygons on the Grid 12.6 Density & Geometric Modeling

12.4 Volume by Unit Cubes & Additive Volume of Composite Solids

Key Takeaways Explain This Topic AI

Volume is the count of unit cubes that fill a solid with no gaps and no overlaps, which is why volume is measured in cubic units.

Filling a rectangular prism layer by layer shows why V = lwh and V = Bh describe the same computation.

The volume of a solid made of two non-overlapping rectangular prisms is the sum of their volumes, which is how composite-solid items are solved.

Volume scales by the cube of a linear scale factor, so doubling every dimension multiplies the volume by eight, not by two.

Last updated: August 2026

Volume by Unit Cubes & Additive Volume of Composite Solids

Section 12.1 supplied the volume formulas for prisms, cylinders, pyramids, cones, and spheres. This section covers the Level M standards underneath them: understanding volume as a count of unit cubes , deriving V = l w h V = lwh V = lw h from that count, and finding the volume of solids composed of two rectangular prisms by adding.

Volume Is a Count of Unit Cubes

Volume is the number of unit cubes — cubes 1 unit on every edge — needed to fill a solid with no gaps and no overlaps .

A cube 1 centimeter on each edge has a volume of 1 cubic centimeter (1 cm³). Fill a box with 60 of them and its volume is 60 cubic centimeters.

Filling Layer by Layer A 4 × 3 × 2 rectangular prism:

Layer 1 (bottom): Layer 2 (top):

  • ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐
  • ├───┼───┼───┼───┤ ├───┼───┼───┼───┤
  • ├───┼───┼───┼───┤ ├───┼───┼───┼───┤
  • └───┴───┴───┴───┘ └───┴───┴───┴───┘
  • 4 × 3 = 12 cubes 4 × 3 = 12 cubes

Total: 2 layers × 12 cubes = 24 cubic units

Two readings of the same count give the two formulas:

  • Reading Formula Computation
  • length × width × height V = l w h V = lwh V = lw h 4 × 3 × 2 = 24 4 \times 3 \times 2 = 24 4 × 3 × 2 = 24
  • area of base × height V = B h V = Bh V = B h 12 × 2 = 24 12 \times 2 = 24 12 × 2 = 24

V = B h V = Bh V = B h is the more powerful form because it generalizes: any prism's volume is its base area times its height, whether the base is a triangle, a trapezoid, or a circle. A cylinder is just a prism whose base is a circle, which is why V = π r 2 h V = \pi r^2 h V = π r 2 h — the π r 2 \pi r^2 π r 2 is B B B .

Why the unit is cubed. cm × cm × cm = cm 3 \text{cm} \times \text{cm} \times \text{cm} = \text{cm}^3 cm × cm × cm = cm 3 . An answer whose unit is not cubed is not a volume. This is the fastest way to catch the classic error of reporting surface area when the question asked for volume.

Counting Cubes on TABE

Items show a stack of cubes and ask for the volume. Two habits keep you accurate:

Count by layers , not by visible faces. Cubes hidden behind others still count.

Check for missing cubes. If the drawing shows a notch, subtract the cubes that are absent.

A drawing shows a solid built as a 5 × 4 base, 3 layers tall, with a 2 × 2 × 1 notch removed from one top corner.

Full block: 5 × 4 × 3 = 60 5 \times 4 \times 3 = 60 5 × 4 × 3 = 60 cubes. Notch: 2 × 2 × 1 = 4 2 \times 2 \times 1 = 4 2 × 2 × 1 = 4 cubes. Volume: 60 − 4 = 56 60 - 4 = \mathbf{56} 60 − 4 = 56 cubic units.

Additive Volume: Composite Solids

The Level M standard says it directly: find volumes of solids composed of two non-overlapping right rectangular prisms by adding the volumes of the non-overlapping parts .

The procedure:

Slice the solid into rectangular prisms — one horizontal or vertical cut usually suffices.

Find each prism's dimensions , deducing any that are not labeled.

Compute each volume.

Add.

Worked example. A loading dock is poured as an L-shaped concrete pad. The lower section is 20 ft × 12 ft × 1 ft. A raised section sits on part of it, 8 ft × 12 ft × 2 ft. What is the total concrete volume?

  • Lower section: 20 × 12 × 1 = 240 20 \times 12 \times 1 = 240 20 × 12 × 1 = 240 cu ft
  • Raised section: 8 × 12 × 2 = 192 8 \times 12 \times 2 = 192 8 × 12 × 2 = 192 cu ft
  • Total: 432 cubic feet

Converting to the unit concrete is ordered in: 432 ÷ 27 = 16 432 \div 27 = \mathbf{16} 432 ÷ 27 = 16 cubic yards.

Worked example with a deduced dimension. A storage unit is a 10 ft × 8 ft × 9 ft room with a 3 ft × 8 ft × 4 ft alcove added along one wall.

  • Main room: 10 × 8 × 9 = 720 10 \times 8 \times 9 = 720 10 × 8 × 9 = 720 cu ft
  • Alcove: 3 × 8 × 4 = 96 3 \times 8 \times 4 = 96 3 × 8 × 4 = 96 cu ft
  • Total: 816 cubic feet

The overlap warning. "Non-overlapping" is in the standard for a reason. If you slice a solid so that a region belongs to both pieces, you will count it twice. Draw the cut line and confirm that every cubic inch belongs to exactly one piece.

Subtracting: Hollow Solids

Some items need the reverse operation.

A concrete pipe is 10 ft long with an outer diameter of 4 ft and an inner diameter of 3 ft. How much concrete? (Use π ≈ 3.14 \pi \approx 3.14 π ≈ 3.14 .)

  • Outer cylinder: 3.14 × 2 2 × 10 = 125.6 3.14 \times 2^2 \times 10 = 125.6 3.14 × 2 2 × 10 = 125.6 cu ft
  • Inner void: 3.14 × 1.5 2 × 10 = 70.65 3.14 \times 1.5^2 \times 10 = 70.65 3.14 × 1. 5 2 × 10 = 70.65 cu ft
  • Concrete: 125.6 − 70.65 = 54.95 125.6 - 70.65 = 54.95 125.6 − 70.65 = 54.95 cubic feet
  • Volume and Scaling

If every linear dimension is multiplied by k k k :

  • Quantity Scale factor
  • Length, width, height k k k
  • Surface area k 2 k^2 k 2
  • Volume k 3 k^3 k 3

Doubling every dimension of a box multiplies its volume by 8 , not by 2. A 2 × 3 × 4 box holds 24 cubic units; a 4 × 6 × 8 box holds 192, and 192 ÷ 24 = 8 = 2 3 192 \div 24 = 8 = 2^3 192 ÷ 24 = 8 = 2 3 .

This is why a container twice as tall, wide, and deep holds eight times as much — a result that regularly appears as a TABE reasoning item and that almost everyone underestimates on instinct.

Volume and Capacity

Volume in cubic units converts to liquid capacity:

  • Conversion Value
  • 1 cubic foot about 7.48 gallons
  • 1 cubic yard 27 cubic feet
  • 1 liter 1,000 cubic centimeters
  • 1 milliliter 1 cubic centimeter

A tank measures 3 ft × 2 ft × 2 ft. Its volume is 12 cubic feet, which holds about 12 × 7.48 ≈ 90 12 \times 7.48 \approx \mathbf{90} 12 × 7.48 ≈ 90 gallons.