Study guide

2.4 Comparing, Ordering, & Rounding Numbers

ATI TEAS 7 Mathematics Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction to ATI TEAS 7 Mathematics

1.1 ATI TEAS 7 Math Exam Format & Logistics 1.2 Healthcare Math Applications & Pacing Strategies 1.3 Test-Taking & Calculator Strategies

2 Chapter 2: Numbers & Operations

2.1 Fractions, Decimals, & Mixed Numbers 2.2 Percentages & Percent Conversions 2.3 Rational Number Operations & Order of Operations 2.4 Comparing, Ordering, & Rounding Numbers

3 Chapter 3: Algebraic Reasoning & Equations

3.1 Simplifying Algebraic Expressions 3.2 Solving Linear Equations in One Variable 3.3 Solving Linear Inequalities 3.4 Translating Word Problems to Algebraic Equations

4 Chapter 4: Ratios, Proportions, and Rates

4.1 Ratios & Rates 4.2 Solving Proportions & Cross-Multiplication 4.3 Practical Ratio & Percentage Applications

5 Chapter 5: Measurement Systems & Conversions

5.1 US Customary & Metric Systems 5.2 Conversions Within & Between Systems 5.3 Geometric Measurement: Perimeter, Area, & Volume

6 Chapter 6: Data Interpretation and Statistics

6.1 Interpreting Tables, Charts, & Graphs 6.2 Measures of Central Tendency & Data Spread 6.3 Variable Relationships & Basic Probability

2.4 Comparing, Ordering, & Rounding Numbers

Key Takeaways Explain This Topic AI

To compare or order mixed real numbers (fractions, decimals, percents), convert all values into a single format—preferably decimals.

Inequality symbols indicate relative magnitude: < (less than), > (greater than), and = (equal to). Read statements from left to right.

When rounding, inspect the digit immediately to the right of the target place value: if it is 5 or greater, round up; if less than 5, keep the target digit unchanged.

Place values extend left of the decimal (ones, tens, hundreds, thousands) and right of the decimal (tenths, hundredths, thousandths).

Clinical dosage safety rules mandate leading zeros (e.g., 0.5 mg) and prohibit trailing zeros (e.g., 2 mg, NEVER 2.0 mg) to prevent medication errors.

Last updated: July 2026

2.4 Comparing, Ordering, & Rounding Numbers

Quick Summary: Comparing and ordering rational numbers requires converting fractions, decimals, and percents into a uniform format (decimals). Rounding requires identifying the target place value digit and examining the neighbor digit to its right. In nursing practice, dosage rounding adheres to strict safety protocols established by Joint Commission guidelines.

Accurate comparison and rounding are essential in healthcare. A misread decimal place value or improper rounding can lead to tenfold medication dosing errors. The ATI TEAS 7 tests your ability to order sets of numbers, compare quantities using inequality symbols, and round numbers to specified place values.

1. The Decimal Place Value System

Our number system is a base-10 positional place value system. The position of a digit relative to the decimal point determines its value.

  • Place Value Map
  • Thousands: 1,000
  • Hundreds: 100
  • Tens: 10
  • Ones: 1
  • [DECIMAL POINT]
  • Tenths (10⁻¹): 0.1 = 1/10
  • Hundredths (10⁻²): 0.01 = 1/100
  • Thousandths (10⁻³): 0.001 = 1/1000
  • Ten-Thousandths (10⁻⁴): 0.0001 = 1/10000

In the number 4,729.8563:

4 is in the Thousands place (4,000).

7 is in the Hundreds place (700).

2 is in the Tens place (20).

9 is in the Ones place (9).

8 is in the Tenths place (0.8 = 8/10).

5 is in the Hundredths place (0.05 = 5/100).

6 is in the Thousandths place (0.006 = 6/1000).

3 is in the Ten-Thousandths place (0.0003 = 3/10000).

2. Inequality Symbols & Comparing Real Numbers

Comparing numbers involves determining which quantity is larger or smaller using mathematical inequality symbols:

< (Less Than): The open mouth points to the larger number. (e.g., 3 < 5).

> (Greater Than): The open mouth points to the larger number. (e.g., 8 > 2).

= (Equal To): Both quantities have identical values. (e.g., 0.5 = 50%).

Strategy for Comparing Different Number Formats:

To compare fractions, decimals, and percentages, convert all numbers to decimals with an equal number of decimal places (pad with trailing zeros if necessary).

Worked Example 1: Compare 5/6 and 0.85 using inequality symbols.

Convert 5/6 to decimal: 5 ÷ 6 = 0.8333...

Write 0.85 to same precision: 0.8500.

Compare place values left-to-right:

Tenths place: Both have 8.

Hundredths place: 3 vs 5. Since 3 < 5, 0.8333... < 0.8500.

Result: 5/6 < 0.85.

3. Ordering Mixed Sets of Numbers

TEAS 7 questions frequently ask candidates to order a list of mixed numbers, fractions, decimals, and percentages from least to greatest or greatest to least .

4-Step Systematic Algorithm:

Read the prompt carefully: Are you ordering from least to greatest (ascending) or greatest to least (descending)?

Convert every item in the list into decimal format using your calculator.

Align the decimals vertically along the decimal point and pad with zeros so all numbers have equal digit length.

Compare digits place-by-place from left to right, then write the original format numbers in the final sorted order.

Worked Example 2: Order the following numbers from least to greatest : 36.5 % , 0.37 , 3 8 , 0.38 , 2 5 36.5\%, \quad 0.37, \quad \frac{3}{8}, \quad 0.38, \quad \frac{2}{5} 36.5% , 0.37 , 8 3 ​ , 0.38 , 5 2 ​

Convert all items to decimals:

  • 36.5% → 36.5 ÷ 100 = 0.365
  • 0.37 → 0.370
  • 3/8 → 3 ÷ 8 = 0.375
  • 0.38 → 0.380
  • 2/5 → 2 ÷ 5 = 0.400

Align vertically and compare hundredths/thousandths:

  • 0.365 (Smallest)
  • 0.370
  • 0.375
  • 0.380
  • 0.400 (Largest)
  • Replace with original expressions in order: 36.5% < 0.37 < 3/8 < 0.38 < 2/5
  • 4. Standard Mathematical Rounding Rules

Rounding simplifies numbers while keeping their value close to the original.

The Standard Rounding Protocol:

Identify the target place value digit (the position you are rounding to).

Look at the neighbor digit immediately to its right (one place value lower).

Apply the decision rule:

If neighbor digit is 5, 6, 7, 8, or 9 → Round UP (add 1 to the target digit).

If neighbor digit is 0, 1, 2, 3, or 4 → Keep Target Digit Same (do not change it).

Drop all digits to the right of the target place value (if after the decimal point), or replace them with zeros (if left of the decimal point).

Worked Example 3 (Multi-Place Rounding): Round 14.8563 to the specified place values.

  • Target Place Value Target Digit Neighbor Digit Right Action Rounded Result
  • Nearest Whole (Ones) 4 (14.8...) 8 8 ≥ 5 → Round 4 up to 5 15
  • Nearest Tenth 8 (14.85...) 5 5 ≥ 5 → Round 8 up to 9 14.9
  • Nearest Hundredth 5 (14.856...) 6 6 ≥ 5 → Round 5 up to 6 14.86
  • Nearest Thousandth 6 (14.8563...) 3 3 < 5 → Keep 6 same 14.856
  • 5. Clinical Nursing Rounding Rules & Safety Standards

In healthcare, dosage rounding is governed by institutional protocols and The Joint Commission (TJC) National Patient Safety Goals .

Clinical Dosage Rounding Rules

Liquid Doses Less Than 1 mL (< 1 mL): Round to the nearest hundredth (0.01 mL) for accuracy when using a 1 mL tuberculin syringe.

Example: 0.486 mL → 0.49 mL.

Liquid Doses Greater Than 1 mL (> 1 mL): Round to the nearest tenth (0.1 mL) when using standard 3 mL or 5 mL syringes.

Example: 2.486 mL → 2.5 mL.

Solid Oral Tablets: Scored tablets can generally be divided into halves (0.5). Round calculated tablet doses to the nearest half tablet (0.5) or whole tablet as directed.

The Joint Commission (TJC) Leading and Trailing Zero Rules

To eliminate medication errors caused by misreading decimal points:

ALWAYS use a Leading Zero before a decimal point for values less than 1.

CORRECT: 0.5 mg

DANGEROUS ERROR: .5 mg (If the decimal point is missed, .5 mg looks like 5 mg—a 10-fold overdose!).

NEVER use a Trailing Zero after a decimal point.

CORRECT: 2 mg

DANGEROUS ERROR: 2.0 mg (If the decimal point is missed, 2.0 mg looks like 20 mg—a 10-fold overdose!).

6. Common Student Traps & Pitfalls

Trap 1: Double Rounding. Rounding 14.46 to the nearest whole number by first rounding to 14.5, then rounding to 15. WRONG! Look ONLY at the immediate right neighbor (4). Since 4 < 5, 14.46 rounds to 14.

Trap 2: Truncating instead of Rounding. Simply cutting off digits (e.g., writing 2.486 → 2.4) instead of properly rounding up to 2.5.

Trap 3: Misidentifying Place Values. Confusing tenths (first digit right of decimal) with tens (second digit left of decimal).