Study guide

9.2 Solutions, Concentration & Solubility

ATI TEAS 7 Science Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Overview & General Science Fundamentals

1.1 About the TEAS 7 Science Exam 1.2 Science Study Strategies & Test-Taking Techniques

2 Chapter 2: Anatomy & Physiology: Organization, Respiration & Circulation

2.1 Body Organization, Anatomical Terminology & Homeostasis 2.2 The Respiratory System & Gas Exchange 2.3 The Cardiovascular & Circulatory System

3 Chapter 3: Anatomy & Physiology: Digestion, Nervous System & Muscular Control

3.1 The Digestive System & Nutrient Breakdown 3.2 The Nervous System & Neural Processing 3.3 The Muscular System & Movement Mechanics

4 Chapter 4: Anatomy & Physiology: Reproduction, Integument & Endocrine Regulation

4.1 The Reproductive System & Development 4.2 The Integumentary System & Protection 4.3 The Endocrine System & Hormonal Control

5 Chapter 5: Anatomy & Physiology: Excretion, Immunity & Structural Support

5.1 The Urinary System & Fluid Balance 5.2 The Immune & Lymphatic Systems 5.3 The Skeletal System & Bone Physiology

6 Chapter 6: Biological Macromolecules, Cell Structure & Transport

6.1 Biological Macromolecules & Polymers 6.2 Cell Structure, Organelles & Membrane Transport

7 Chapter 7: Genetics, Molecular Biology & Cellular Reproduction

7.1 Cellular Reproduction: Mitosis & Meiosis 7.2 DNA Structure, RNA & Protein Synthesis 7.3 Mendelian Genetics & Inheritance Patterns

8 Chapter 8: General Chemistry: Matter, Atomic Structure & Bonding

8.1 States of Matter & Phase Transitions 8.2 Atomic Structure & The Periodic Table 8.3 Chemical Bonding & Molecular Properties

9 Chapter 9: General Chemistry: Reactions, Solutions & Acid-Base Chemistry

9.1 Chemical Reactions & Stoichiometric Balancing 9.2 Solutions, Concentration & Solubility 9.3 Acids, Bases & pH Balance

10 Chapter 10: Scientific Reasoning, Measurement & Data Analysis

10.1 Scientific Method & Experimental Design 10.2 Scientific Measurement & Laboratory Instrumentation 10.3 Data Interpretation, Tables & Graphs 10.4 Cause-and-Effect Relationships & Scientific Evidence

9.2 Solutions, Concentration & Solubility

Key Takeaways Explain This Topic AI

A solution is a homogeneous mixture composed of a solute dissolved uniformly within a solvent, with water serving as the primary biological universal solvent.

Solutions are classified by solute load into unsaturated, saturated (at dynamic equilibrium), and supersaturated (metastable, holding excess solute).

Temperature increases solid solubility in liquids but decreases gas solubility, whereas pressure increases gas solubility in direct proportion according to Henry's Law (C = k * P).

Molarity (M = moles of solute / Liters of solution) is the standard chemical unit of concentration, while dilution calculations utilize the conservation formula M1V1 = M2V2.

Tonicity describes the osmotic effect of a solution on cell volume: hypertonic solutions cause cell shrinkage (crenation), hypotonic solutions cause cell swelling (lysis), and isotonic solutions maintain stable cell volume.

Last updated: July 2026

9.2 Solutions, Concentration & Solubility

Solutions play a central role in biological systems, human physiology, and laboratory chemistry. From cellular cytoplasm to human blood plasma, chemical reactions in living organisms occur within aqueous solution environments. For the TEAS 7 exam, students must master solution components, solubility parameters, concentration units, dilution mathematics, and osmotic properties.

Solution Components & Solvation

A solution is a homogeneous mixture consisting of two or more substances blended uniformly at the molecular or ionic level. Solutions consist of two primary parts:

Solute : The substance that is dissolved and present in the smaller amount (e.g., sodium chloride salt, glucose, or oxygen gas).

Solvent : The dissolving medium present in the larger amount (e.g., water, ethanol, or benzene).

When water serves as the solvent, the mixture is called an aqueous solution ( a q aq a q ). Water is often called the "universal solvent" because its strong polar bent structure and hydrogen-bonding capability allow it to dissolve a wide range of ionic compounds and polar covalent molecules.

The Solvation Process

During solvation (or hydration when water is the solvent), solvent molecules surround individual solute particles. Polar water molecules orient their partially negative oxygen atoms toward positive cations (like N a + Na^+ N a + ) and their partially positive hydrogen atoms toward negative anions (like C l − Cl^- C l − ). This electrostatic attraction pulls the ions away from the crystal lattice, dispersing them evenly throughout the liquid.

Degrees of Solute Saturation

Solutions are classified based on the quantity of dissolved solute relative to the maximum capacity of the solvent at a given temperature and pressure:

Unsaturated Solution : Contains less dissolved solute than the solvent's maximum capacity at a specific temperature. If additional solute is added, it will readily dissolve.

Saturated Solution : Contains the maximum amount of dissolved solute that can remain in stable equilibrium with undissolved solute at a given temperature. At saturation, the rate of dissolution equals the rate of crystallization (dynamic equilibrium): Undissolved Solute ⇌ Dissolved Solute \text{Undissolved Solute} \rightleftharpoons \text{Dissolved Solute} Undissolved Solute ⇌ Dissolved Solute

Supersaturated Solution : An unstable, metastable condition where a solution contains more dissolved solute than a saturated solution at the same temperature. Supersaturated solutions are prepared by dissolving solute at high temperatures and cooling the mixture slowly without disturbance. Introducing a single "seed crystal" or mechanical shock triggers rapid crystallization of the excess solute.

Factors Affecting Solubility & Henry's Law

Solubility is the quantitative measure of the maximum amount of solute that dissolves in a given quantity of solvent at a specified temperature and pressure.

Temperature Effects

Solid Solutes in Liquids : For most solid solutes, solubility increases as temperature rises . Higher thermal energy increases solvent molecular motion, helping break lattice interactions.

Gaseous Solutes in Liquids : For all gases, solubility decreases as temperature rises . As thermal energy increases, dissolved gas molecules gain kinetic energy, escape from the liquid phase, and re-enter the gas phase above the solution (e.g., warm soda loses dissolved C O 2 CO_2 C O 2 ​ rapidly and goes flat).

Pressure Effects & Henry's Law

Pressure changes have virtually no effect on solid or liquid solubility, but profoundly impact gas solubility in liquids. Henry's Law states that at a constant temperature, the solubility ( C C C ) of a gas in a liquid is directly proportional to the partial pressure ( P P P ) of that gas above the liquid surface: C = k ⋅ P C = k \cdot P C = k ⋅ P

where k k k is Henry's Law constant. When pressure increases, more gas molecules are forced into contact with the liquid surface per second, driving gas dissolution. In human physiology, Henry's Law explains respiratory gas exchange: high oxygen partial pressure in pulmonary alveoli forces O 2 O_2 O 2 ​ to dissolve into pulmonary capillary blood.

"Like Dissolves Like" Principle

Solubility depends strongly on chemical polarity:

Polar solvents (like water) dissolve polar covalent solutes (like sugar) and ionic solutes (like N a C l NaCl N a Cl ).

Nonpolar solvents (like hexane or oils) dissolve nonpolar solutes (like lipids, grease, and hydrocarbons).

Polar and nonpolar substances (like oil and water) are immiscible (they separate into distinct layers).

Concentration Units & Dilution Mathematics

Concentration expresses the relative ratio of solute to solvent or total solution.

Molarity ( M M M )

Molarity is the most common chemical concentration unit, defined as the number of moles of solute per liter of total solution: Molarity ( M ) = Moles of Solute Liters of Solution ( L ) \text{Molarity } (M) = \frac{\text{Moles of Solute}}{\text{Liters of Solution} (L)} Molarity ( M ) = Liters of Solution ( L ) Moles of Solute ​

TEAS Calculation Tip: Always convert solution volume from milliliters ( m L mL m L ) to liters ( L L L ) by dividing by 1,000 before calculating molarity ( 500 mL = 0.50 L 500\text{ mL} = 0.50\text{ L} 500 mL = 0.50 L ).

Mass Percent ( % w / w ) (\% w/w) ( % w / w )

Mass percent expresses solute mass as a percentage of total solution mass: Mass Percent = ( Mass of Solute Mass of Solute + Mass of Solvent ) × 100 \text{Mass Percent} = \left( \frac{\text{Mass of Solute}}{\text{Mass of Solute} + \text{Mass of Solvent}} \right) \times 100 Mass Percent = ( Mass of Solute + Mass of Solvent Mass of Solute ​ ) × 100

Dilution Equation ( M 1 V 1 = M 2 V 2 M_1V_1 = M_2V_2 M 1 ​ V 1 ​ = M 2 ​ V 2 ​ )

During a dilution , solvent is added to a concentrated stock solution. While the total volume increases and molarity decreases, the total moles of solute remain constant . This leads to the fundamental dilution equation: M 1 V 1 = M 2 V 2 M_1 V_1 = M_2 V_2 M 1 ​ V 1 ​ = M 2 ​ V 2 ​

where M 1 M_1 M 1 ​ and V 1 V_1 V 1 ​ represent initial stock molarity and volume, and M 2 M_2 M 2 ​ and V 2 V_2 V 2 ​ represent final diluted molarity and volume.

Osmotic Pressure & Tonicity

Osmosis is the net movement of water across a semipermeable membrane from a region of lower solute concentration (higher water concentration) toward a region of higher solute concentration (lower solute concentration). Osmotic pressure ( Π \Pi Π ) is the minimum external pressure required to prevent this net water flow.

Tonicity and Cellular Responses

Tonicity describes the capability of an extracellular solution to modify cellular volume by altering water movement across the cell membrane.

  • Solution Type Solute Concentration vs. Cell Net Water Movement Effect on Red Blood Cells
  • Hypertonic Higher solute outside cell Water leaves cell Cell shrinks and shrivels ( crenation )
  • Hypotonic Lower solute outside cell Water enters cell Cell swells and bursts ( hemolysis / lysis )
  • Isotonic Equal solute inside and outside No net water movement Cell maintains normal shape and volume

In clinical care, intravenous fluids must match blood tonicity. Normal saline ( 0.9 % NaCl 0.9\%\text{ NaCl} 0.9% NaCl ) is isotonic to human red blood cells, ensuring stable fluid balance.