Study guide

3.1 Linear equations & functions

Texas TSIA2 Mathematics Exam

Track your progress as you read

Finished sections get a check mark.

1 TSIA2 Math Overview & Strategy

1.1 Exam facts, CRC vs diagnostic routing, college-readiness score & strategy

2 Quantitative Reasoning

2.1 Ratios, proportions & percents 2.2 Linear equations & expressions 2.3 Proportional relationships in quantitative contexts

3 Algebraic Reasoning

3.1 Linear equations & functions 3.2 Quadratic & polynomial equations 3.3 Exponential & rational equations 3.4 Radical equations & functions

4 Geometric & Spatial Reasoning

4.1 Measurement & unit conversions 4.2 Perimeter, area, surface area & volume 4.3 Transformations & similarity 4.4 Right-triangle trigonometry

5 Probabilistic & Statistical Reasoning

5.1 Classifying data & data displays 5.2 Measures of center & spread 5.3 Probability

3.1 Linear equations & functions

Key Takeaways Explain This Topic AI

Solve linear equations by undoing operations in reverse order, doing the same step to both sides until the variable is alone.

Slope-intercept form y = mx + b gives slope m and y-intercept b; slope equals rise over run, (y2 - y1)/(x2 - x1).

Point-slope form y - y1 = m(x - x1) builds a line's equation from one point and the slope.

Function notation f(x) is an output, not multiplication; evaluate by substituting the input and solve f(x) = k by setting the rule equal to k.

In a linear model the slope is the rate of change and the y-intercept is the starting value; systems are solved by substitution or elimination.

Last updated: July 2026

Linear Equations and Functions

A linear equation is an equation in which the variable appears only to the first power — there are no exponents, square roots, or variables in a denominator. On the TSIA2 Mathematics test you will solve linear equations, graph and interpret linear functions, and work with systems of two linear equations. The inverse-operation routine you practice here shows up throughout the whole exam, so make it automatic.

Solving Linear Equations

To solve a linear equation, undo the operations in reverse order until the variable stands alone. Whatever you do to one side, you must do to the other.

Example 1. Solve 3x + 7 = 22.

Subtract 7 from both sides: 3x = 15.

Divide both sides by 3: x = 5.

Check: 3(5) + 7 = 15 + 7 = 22. Correct.

Example 2 (variable on both sides). Solve 5x − 4 = 2x + 11.

Subtract 2x from both sides: 3x − 4 = 11.

Add 4 to both sides: 3x = 15.

Divide by 3: x = 5.

Check: 5(5) − 4 = 21 and 2(5) + 11 = 21. Both sides equal 21, so it works.

Example 3 (distribute first). Solve 2(x + 3) = 4x − 2.

Distribute the 2: 2x + 6 = 4x − 2.

Subtract 2x: 6 = 2x − 2.

Add 2: 8 = 2x, so x = 4.

Check: 2(4 + 3) = 14 and 4(4) − 2 = 14. Correct.

Slope-Intercept Form

The equation y = mx + b is called slope-intercept form. Here m is the slope (the steepness of the line) and b is the y-intercept (the y-value where the line crosses the y-axis). Slope is the ratio of vertical change to horizontal change between any two points:

slope m = rise / run = (y₂ − y₁) / (x₂ − x₁).

Example 4. Find the equation of the line through (1, 2) and (4, 11).

Slope: m = (11 − 2) / (4 − 1) = 9 / 3 = 3.

Now find b using y = 3x + b with the point (1, 2): 2 = 3(1) + b, so b = −1.

Equation: y = 3x − 1.

Point-Slope Form

When you know the slope and one point, the fastest tool is point-slope form : y − y₁ = m(x − x₁).

Example 5. Write the line with slope 2 that passes through (3, 5).

  • y − 5 = 2(x − 3)
  • y − 5 = 2x − 6

y = 2x − 1.

Function Notation

A function pairs each input with exactly one output. We write f(x) , read "f of x," for the output when the input is x. The parentheses do not mean multiplication — they hold the input.

Example 6. If f(x) = 2x − 1, then:

Evaluate f(4): f(4) = 2(4) − 1 = 8 − 1 = 7.

Solve f(x) = 9: set 2x − 1 = 9, so 2x = 10 and x = 5.

Domain and Range

The domain is the set of allowed inputs (x-values), and the range is the set of possible outputs (y-values). For a non-constant linear function such as f(x) = 2x − 1, the domain and the range are both all real numbers. Restrictions appear only when a real situation limits the inputs — for instance, if x counts hours worked, then the domain is x ≥ 0 because negative hours make no sense.

Systems of Linear Equations

A system is two equations solved together; the solution is the single (x, y) point that satisfies both equations at once.

  • Substitution — Example 7. y = 2x + 1
  • 3x + y = 11

Replace y in the second equation with 2x + 1: 3x + (2x + 1) = 11, so 5x + 1 = 11, giving 5x = 10 and x = 2.

Then y = 2(2) + 1 = 5. Solution: (2, 5).

  • Elimination — Example 8. 2x + 3y = 12
  • 2x − y = 4

Subtract the second equation from the first so the x-terms cancel: (3y − (−y)) = 12 − 4, which gives 4y = 8, so y = 2.

Substitute back: 2x − 2 = 4, so 2x = 6 and x = 3. Solution: (3, 2).

Interpreting Linear Functions

In a real context the slope is a rate of change and the y-intercept is a starting value . Suppose a phone plan costs C = 0.10m + 20, where m is the number of minutes used.

  • Piece Meaning
  • slope 0.10 cost of each additional minute ($0.10)
  • intercept 20 fixed monthly base charge ($20)
  • C at m = 100 0.10(100) + 20 = $30 total

Reading the slope and intercept from a formula, table, or graph is one of the most common TSIA2 question types. Always ask two questions: "What changes per step?" (that is the slope) and "Where does it start?" (that is the intercept). Answer those and you can interpret almost any linear model on the test.