Study guide
14.1 The Rock Cycle, Minerals, and Soils
TExES Science 4-8 116
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
About the TExES Science 4-8 (116) Exam How to Use This Guide and Study Strategy
2 Chapter 1: Domain I — Laboratory Safety and Scientific Tools
1.1 Laboratory Safety Management 1.2 Safe and Ethical Care of Living Organisms and Specimens 1.3 Tools, Materials, Equipment, and Measurement
3 Chapter 2: Domain I — Measurement Systems and Scientific Data
2.1 The International System of Units and Unit Conversion 2.2 Organizing, Displaying, and Communicating Scientific Data
4 Chapter 3: Domain I — Inquiry, the Nature of Science, and Society
3.1 The Scientific Inquiry Process 3.2 The History and Nature of Science 3.3 Science in Daily Life and Societal Decisions
5 Chapter 4: Domain I — Resources, Unifying Concepts, and Models
4.1 Natural Resources, Population Growth, and Human Impact 4.2 Unifying Concepts Across the Sciences 4.3 Scientific Models: Building, Using, and Evaluating
6 Chapter 5: Domain II — Forces and Motion
5.1 Describing Motion: Kinematics and Motion Graphs 5.2 Forces and Motion 5.3 Simple Machines, Work Input, and Mechanical Advantage
7 Chapter 6: Domain II — Matter, Atoms, and Chemical Change
6.1 Physical Properties of and Changes in Matter 6.2 Atomic Structure, Isotopes, and Reading the Periodic Table 6.3 Chemical Properties of and Changes in Matter
8 Chapter 7: Domain II — Energy, Heat, and Electricity
7.1 Work, Power, and Mechanical Energy 7.2 Thermal Energy: Heat, Temperature, and Heat Transfer 7.3 Electricity and Magnetism
9 Chapter 8: Domain II — Waves and Energy Transformations
8.1 Waves: Light and Sound 8.2 Energy Transformations and the Conservation of Matter and Energy
10 Chapter 9: Domain III — Classification, Cells, and Biomolecules
9.1 Classification, Taxonomy, and Dichotomous Keys 9.2 Cell Structure and Function 9.3 Biomolecules and the Chemistry of Life
11 Chapter 10: Domain III — Organism Structure and Energy Use
10.1 Human Body Systems and Levels of Organization 10.2 Plant Structure, Function, and Transport 10.3 Photosynthesis, Cellular Respiration, and Energy Acquisition
12 Chapter 11: Domain III — Reproduction, Heredity, Evolution, and Regulation
11.1 Reproduction and the Mechanisms of Heredity 11.2 Adaptations of Organisms and the Theory of Evolution 11.3 Regulatory Mechanisms and Behavior
13 Chapter 12: Domain III — Ecosystems and Population Ecology
12.1 Ecosystems, Food Webs, and Energy Flow 12.2 Population Dynamics, Succession, and Biodiversity
14 Chapter 13: Domain IV — Earth's Structure and Spheres
13.1 The Structure and Function of Earth Systems 13.2 Surface Water, Groundwater, and the Oceans 13.3 Earth's Atmosphere: Composition, Structure, and Energy Transfer
15 Chapter 14: Domain IV — Cycles in Earth Systems and Tectonic Forces
14.1 The Rock Cycle, Minerals, and Soils 14.2 Water and Nutrient Cycles in Earth Systems 14.3 Plate Tectonics, Earthquakes, and Volcanoes
16 Chapter 15: Domain IV — Weather, Climate, and Earth History
15.1 The Role of Energy in Weather and Climate 15.2 Air Masses, Fronts, Weather Maps, and Forecasting 15.3 The History of the Earth System
17 Chapter 16: Domain IV — The Solar System and the Universe
16.1 The Solar System and the Earth-Moon-Sun System 16.2 Stars, Galaxies, and the Universe
18 Chapter 17: Domain V — Teaching Science and How Students Learn
17.1 Teaching Science and How Students Learn 17.2 Differentiation, Emergent Bilingual Support, and Inclusive Science Instruction 17.3 Questioning Strategies and Conceptual Change
19 Chapter 18: Domain V — Inquiry Instruction and Assessment
18.1 Scientific Inquiry in Science Instruction 18.2 Varied and Appropriate Assessments of Science Learning 18.3 Rubrics, Portfolios, Lab Journals, and Descriptive Feedback
14.1 The Rock Cycle, Minerals, and Soils
Key Takeaways Explain This Topic AI
The rock cycle connects three rock families — igneous, sedimentary, and metamorphic — through melting, crystallization, weathering, lithification, heat, and pressure; any rock can become any other rock.
Igneous rocks form from cooled magma; intrusive rocks cool slowly underground to form coarse grains (granite) while extrusive rocks cool quickly at the surface to form fine grains (basalt, obsidian).
Sedimentary rocks form through compaction and cementation of sediment; metamorphic rocks form when existing rocks recrystallize under heat and pressure without melting.
A mineral is naturally occurring, inorganic, solid, with a definite chemical composition and an ordered crystalline structure; Mohs hardness, luster, streak, cleavage, and fracture are the standard identification tests.
Fossil fuels form from ancient organic matter buried under low-oxygen conditions; coal forms from swamp plant debris while petroleum and natural gas form from marine plankton buried and heated over millions of years.
Last updated: August 2026
Loading diagram... The Rock Cycle: Interconversions Among Igneous, Sedimentary, and Metamorphic Rocks
The Three Rock Families and Their Interconversions
The rock cycle is the continuous set of processes that recycles Earth's rocky material. Three families — igneous, sedimentary, and metamorphic — interconvert through melting, crystallization, weathering, lithification, and metamorphism. Any rock can become any other rock given enough time, heat, pressure, or erosion.
Igneous Rocks
Igneous rocks crystallize from magma (below ground) or lava (at the surface). Two subtypes differ by grain size and cooling history:
Intrusive (plutonic) rocks cool slowly underground, allowing large crystals to grow. Granite , with visible quartz, feldspar, and mica crystals, is the textbook example.
Extrusive (volcanic) rocks cool quickly at the surface, producing fine grains or glass. Basalt is fine-grained and dark; obsidian is volcanic glass; pumice is frothy lava that traps gas bubbles.
The Texas Hill Country exposes Enchanted Rock , a granite batholith that cooled intrusively about a billion years ago and was exposed by long-term erosion — a single field site showing both igneous formation and destructive surface processes.
Sedimentary Rocks
Sedimentary rocks form through lithification — the combined processes of compaction (sediment squeezed by overlying weight) and cementation (minerals such as calcite or silica precipitating between grains). Common types:
Clastic rocks form from broken rock fragments. Shale (mud), sandstone (sand), and conglomerate (rounded pebbles) span grain sizes from fine to coarse.
Chemical rocks precipitate from solution; rock salt (halite) and some limestone form this way.
Organic rocks accumulate from biological debris; coal and limestone made of shell fragments fit here.
Sedimentary rocks often preserve fossils and sedimentary structures (ripple marks, cross-bedding, mud cracks) that record past environments — a key 4-8 teaching point.
Metamorphic Rocks
Metamorphic rocks form when existing rocks recrystallize under heat and pressure without melting. Two textures distinguish the family:
Foliated rocks show aligned mineral bands from directed pressure; slate (from shale), schist , and gneiss are examples.
Nonfoliated rocks lack aligned bands; marble (from limestone) and quartzite (from sandstone) form under uniform pressure.
Comparison of the Three Rock Families
- Feature Igneous Sedimentary Metamorphic
- Origin Cooling of magma or lava Compaction and cementation of sediment Heat and pressure on existing rock
Texture Crystalline (interlocking grains) Clastic, chemical, or organic; often layered Foliated or nonfoliated; recrystallized
Common examples Granite, basalt, obsidian Sandstone, shale, limestone, coal Slate, schist, gneiss, marble, quartzite
- Fossils? Rarely preserved (heat destroys them) Commonly preserved Usually destroyed
- Minerals: Definition and Identification
A mineral must satisfy five criteria: it is naturally occurring , inorganic , solid , has a definite chemical composition , and an ordered crystalline structure . A substance that fails any criterion — for example, glass (no crystal structure), coal (organic), or a synthetic ruby (not natural) — is not a mineral.
The standard identification tests rely on physical properties that do not require advanced equipment:
Property What it measures Example
Hardness (Mohs scale) Resistance to scratching, 1 (talc) to 10 (diamond) Quartz (7) scratches glass (about 5.5)
Luster How light reflects — metallic, vitreous, dull, pearly Pyrite has a metallic luster
Streak Color of the powdered mineral on an unglazed porcelain plate Hematite leaves a reddish-brown streak regardless of surface color
Cleavage / fracture Tendency to break along flat planes (cleavage) or irregularly (fracture) Halite cleaves in three directions at 90°; quartz fractures conchoidally
Color Least reliable property; impurities change it Pure quartz is clear, but varieties include amethyst (purple) and citrine (yellow)
Students should use multiple properties together because a single test rarely gives a unique identification — calcite and quartz can both look clear, but calcite fizzes in dilute acid and has a Mohs hardness of 3, while quartz does not fizz and has hardness 7.
Fossil Fuels: Coal, Petroleum, Natural Gas
Fossil fuels are non-renewable energy sources formed from ancient organic matter buried faster than it could decay. Low-oxygen conditions preserved the carbon, and later heat and pressure converted it into fuel over millions of years.
Coal forms from terrestrial swamp plants that accumulated in anaerobic wetlands. Stages from soft to hard are peat → lignite → sub-bituminous → bituminous → anthracite , with increasing carbon content and heat value.
Petroleum and natural gas form from marine plankton buried in ocean-floor sediments. As burial depth increases, temperature rises; oil forms in the oil window (about 60-120 °C) and natural gas forms at higher temperatures. The oil and gas migrate upward through permeable rock until trapped by an impermeable cap rock.
Because fossil fuels form so slowly on human timescales, they are classified as non-renewable ; burning them releases stored carbon as CO₂, linking this section to the carbon cycle in Section 14.2.
Soil Formation and Soil Horizons
Soil forms through weathering of parent material combined with the accumulation of organic matter. Physical weathering breaks rock into smaller pieces without changing chemistry (frost wedging, root growth, abrasion); chemical weathering alters minerals (hydrolysis, oxidation, carbonic-acid dissolution of limestone). Over time, a vertical soil profile develops distinct layers called horizons :
- Horizon Description
- O horizon Surface organic layer of decomposing leaves and humus
- A horizon Topsoil — mineral particles mixed with organic matter; where most plant roots grow
- B horizon Subsoil — accumulates minerals leached from above; often clay-rich and colored by iron oxides
- C horizon Weathered parent material, partly broken bedrock
- R horizon Unweathered bedrock
Soil types reflect climate and parent material: pedalfers (iron- and aluminum-rich, leached soils of humid regions) and pedocals (calcium-carbonate-accumulating soils of dry regions, common in West Texas) are classic contrasts. Soil fertility, erosion control, and the link between soil and agriculture give 4-8 teachers a direct bridge to social studies and to the nutrient-cycle material in the next section, "Water and Nutrient Cycles in Earth Systems."