Study guide

14.3 Plate Tectonics, Earthquakes, and Volcanoes

TExES Science 4-8 116

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

About the TExES Science 4-8 (116) Exam How to Use This Guide and Study Strategy

2 Chapter 1: Domain I — Laboratory Safety and Scientific Tools

1.1 Laboratory Safety Management 1.2 Safe and Ethical Care of Living Organisms and Specimens 1.3 Tools, Materials, Equipment, and Measurement

3 Chapter 2: Domain I — Measurement Systems and Scientific Data

2.1 The International System of Units and Unit Conversion 2.2 Organizing, Displaying, and Communicating Scientific Data

4 Chapter 3: Domain I — Inquiry, the Nature of Science, and Society

3.1 The Scientific Inquiry Process 3.2 The History and Nature of Science 3.3 Science in Daily Life and Societal Decisions

5 Chapter 4: Domain I — Resources, Unifying Concepts, and Models

4.1 Natural Resources, Population Growth, and Human Impact 4.2 Unifying Concepts Across the Sciences 4.3 Scientific Models: Building, Using, and Evaluating

6 Chapter 5: Domain II — Forces and Motion

5.1 Describing Motion: Kinematics and Motion Graphs 5.2 Forces and Motion 5.3 Simple Machines, Work Input, and Mechanical Advantage

7 Chapter 6: Domain II — Matter, Atoms, and Chemical Change

6.1 Physical Properties of and Changes in Matter 6.2 Atomic Structure, Isotopes, and Reading the Periodic Table 6.3 Chemical Properties of and Changes in Matter

8 Chapter 7: Domain II — Energy, Heat, and Electricity

7.1 Work, Power, and Mechanical Energy 7.2 Thermal Energy: Heat, Temperature, and Heat Transfer 7.3 Electricity and Magnetism

9 Chapter 8: Domain II — Waves and Energy Transformations

8.1 Waves: Light and Sound 8.2 Energy Transformations and the Conservation of Matter and Energy

10 Chapter 9: Domain III — Classification, Cells, and Biomolecules

9.1 Classification, Taxonomy, and Dichotomous Keys 9.2 Cell Structure and Function 9.3 Biomolecules and the Chemistry of Life

11 Chapter 10: Domain III — Organism Structure and Energy Use

10.1 Human Body Systems and Levels of Organization 10.2 Plant Structure, Function, and Transport 10.3 Photosynthesis, Cellular Respiration, and Energy Acquisition

12 Chapter 11: Domain III — Reproduction, Heredity, Evolution, and Regulation

11.1 Reproduction and the Mechanisms of Heredity 11.2 Adaptations of Organisms and the Theory of Evolution 11.3 Regulatory Mechanisms and Behavior

13 Chapter 12: Domain III — Ecosystems and Population Ecology

12.1 Ecosystems, Food Webs, and Energy Flow 12.2 Population Dynamics, Succession, and Biodiversity

14 Chapter 13: Domain IV — Earth's Structure and Spheres

13.1 The Structure and Function of Earth Systems 13.2 Surface Water, Groundwater, and the Oceans 13.3 Earth's Atmosphere: Composition, Structure, and Energy Transfer

15 Chapter 14: Domain IV — Cycles in Earth Systems and Tectonic Forces

14.1 The Rock Cycle, Minerals, and Soils 14.2 Water and Nutrient Cycles in Earth Systems 14.3 Plate Tectonics, Earthquakes, and Volcanoes

16 Chapter 15: Domain IV — Weather, Climate, and Earth History

15.1 The Role of Energy in Weather and Climate 15.2 Air Masses, Fronts, Weather Maps, and Forecasting 15.3 The History of the Earth System

17 Chapter 16: Domain IV — The Solar System and the Universe

16.1 The Solar System and the Earth-Moon-Sun System 16.2 Stars, Galaxies, and the Universe

18 Chapter 17: Domain V — Teaching Science and How Students Learn

17.1 Teaching Science and How Students Learn 17.2 Differentiation, Emergent Bilingual Support, and Inclusive Science Instruction 17.3 Questioning Strategies and Conceptual Change

19 Chapter 18: Domain V — Inquiry Instruction and Assessment

18.1 Scientific Inquiry in Science Instruction 18.2 Varied and Appropriate Assessments of Science Learning 18.3 Rubrics, Portfolios, Lab Journals, and Descriptive Feedback

14.3 Plate Tectonics, Earthquakes, and Volcanoes

Key Takeaways Explain This Topic AI

Wegener's continental drift was rejected for decades because he could not identify a mechanism; seafloor spreading, discovered through mid-ocean ridge mapping and magnetic striping, supplied it.

The lithosphere is broken into rigid plates that move over the ductile asthenosphere, driven by mantle convection with ridge push and slab pull.

Divergent boundaries create new crust at mid-ocean ridges and rift valleys, convergent boundaries build mountains and trenches through subduction or collision, and transform boundaries produce earthquakes with little volcanism.

Primary (P) waves are compressional, travel fastest, and pass through solids and liquids, while secondary (S) waves are transverse, slower, and cannot pass through liquids — which is how the liquid outer core was discovered.

Locating an epicenter requires arrival-time data from at least three seismic stations, because the distance from a single station defines only a circle of possible locations.

Last updated: August 2026

The Unifying Theory of Earth Science

Plate tectonics does for earth science what evolution does for biology: it explains an otherwise unrelated collection of observations with one mechanism. Competency 020 asks specifically how "tectonic forces have shaped the landforms of Earth over time," so items pair a mechanism with a resulting landform and ask you to connect them.

From Continental Drift to Plate Tectonics

Alfred Wegener proposed continental drift in 1912, supported by four lines of evidence:

Jigsaw fit of the continental margins, especially South America and Africa, which Wegener reassembled into a single supercontinent he named Pangaea .

Matching fossils across oceans — the freshwater reptile Mesosaurus in Brazil and South Africa, the fern Glossopteris across five southern landmasses.

Matching rock formations and mountain belts — the Appalachians continue as the Caledonides in Scotland and Scandinavia.

Paleoclimate evidence — glacial deposits and scratch marks in now-tropical India and Africa; coal deposits in Antarctica.

Wegener's hypothesis was rejected for roughly fifty years because he proposed no plausible mechanism : continents plowing through solid oceanic rock was physically untenable. This is a first-rate nature-of-science teaching case, showing that evidence alone is not always enough to secure acceptance and that a hypothesis becomes powerful when it acquires a mechanism.

The mechanism arrived after World War II with seafloor spreading . Ocean-floor mapping revealed a globe-encircling mid-ocean ridge system; dating showed ocean crust is youngest at the ridge and progressively older away from it , and nowhere older than about 200 million years, far younger than continental rock. Magnetometer surveys found symmetrical magnetic striping on both sides of the ridges, recording reversals of Earth's magnetic field as new crust cooled and locked in the field direction of its time. New crust forms at ridges and is destroyed at trenches, so the seafloor is a conveyor belt.

The Driving Mechanism

The rigid outer lithosphere — crust plus the uppermost brittle mantle — is broken into plates that move over the hotter, ductile asthenosphere . Motion is driven by:

Mantle convection — heat from Earth's interior drives slow circulation of mantle rock over geologic time.

Ridge push — newly formed, elevated ridge crust slides gravitationally away from the ridge axis.

Slab pull — dense, cold subducting lithosphere sinks and drags the rest of the plate behind it; this is generally considered the dominant force.

Plates move at rates of roughly 2-10 cm per year — about the rate fingernails grow, which is the standard classroom comparison.

The Three Boundary Types

Boundary Relative motion Crust Landforms and processes Example

Divergent Apart Created Mid-ocean ridge; rift valley; shallow earthquakes; basaltic volcanism Mid-Atlantic Ridge; East African Rift

Convergent: ocean-continent Together Destroyed Deep-sea trench; subduction; explosive volcanic arc; strong earthquakes Andes; Cascades

Convergent: ocean-ocean Together Destroyed Trench; volcanic island arc Japan; Aleutians; Mariana Trench

Convergent: continent-continent Together Neither, crust thickens Massive folded mountains; little volcanism Himalayas; Alps

Transform Sliding past Neither Offset features; frequent shallow earthquakes; little volcanism San Andreas Fault

Two frequently tested distinctions: subduction requires dense oceanic crust , so continent-continent collisions crumple upward into high mountains rather than subducting; and transform boundaries generate earthquakes without volcanoes , because no crust is being created or melted.

Hot spots are a separate mechanism. A stationary mantle plume melts through a moving plate, producing a chain of volcanoes that ages progressively away from the current active vent — the Hawaiian island chain is the classic case, and it demonstrates plate motion independently of boundary processes.

Earthquakes

An earthquake occurs when accumulated elastic strain along a fault is released suddenly. The focus (hypocenter) is the point at depth where rupture begins; the epicenter is the point on the surface directly above it.

Wave Type Speed Travels through Motion

Primary (P) Compressional (push-pull) Fastest; arrives first Solids and liquids Particles move parallel to wave travel

  • Secondary (S) Transverse (shear) Slower Solids only Particles move perpendicular to travel
  • Surface (L and R) Along the surface Slowest Surface Rolling and side-to-side; causes most damage

The fact that S waves cannot pass through liquid produced one of geology's great inferences: an S-wave shadow zone on the far side of Earth showed that the outer core is liquid. That is a strong nature-of-science example — a conclusion about a place no one can visit, drawn entirely from wave behavior.

Locating an epicenter uses the P-S arrival-time difference. The larger the gap between the P and S arrivals, the farther the station is from the epicenter. One station yields a distance, which defines a circle of possible locations; two stations narrow it to two intersection points; three stations pin it to a single point. This triangulation procedure is a standard exam item and a standard classroom activity.

Magnitude and intensity are different measures. The moment magnitude scale (Mw) — which has largely replaced the Richter scale for large events — is logarithmic: each whole number is about 10 times the ground-shaking amplitude and roughly 32 times the energy release. The modified Mercalli scale rates observed intensity of shaking and damage at a location, so a single earthquake has one magnitude but many intensities depending on distance, geology, and construction.

Volcanoes

  • Type Shape and size Lava Eruption style Example
  • Shield Broad, gently sloping, very large Basaltic, low viscosity Effusive, flowing Mauna Loa
  • Cinder cone Small, steep, symmetrical Basaltic, gas-rich fragments Short, explosive bursts of tephra Parícutin

Composite (stratovolcano) Tall, steep-sided, layered Andesitic, high viscosity Alternating explosive and effusive Mount St. Helens; Fuji

Viscosity and dissolved gas content determine eruption style. Low-viscosity basaltic lava lets gas escape easily and flows out quietly; high-viscosity, silica-rich magma traps gas until pressure fails catastrophically. Composite volcanoes therefore dominate subduction-zone arcs, where water released from the descending slab produces gas-rich, silica-rich magma.

Texas records this history in its rocks: the Ouachita Mountains formed in a Paleozoic continental collision, the Big Bend region preserves Cenozoic volcanic rocks, and the Balcones Fault Zone marks ancient crustal tension along a line that still controls springs, soils, and city locations from Del Rio through Austin to Dallas.