Study guide

2.1 The International System of Units and Unit Conversion

TExES Science 4-8 116

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

About the TExES Science 4-8 (116) Exam How to Use This Guide and Study Strategy

2 Chapter 1: Domain I — Laboratory Safety and Scientific Tools

1.1 Laboratory Safety Management 1.2 Safe and Ethical Care of Living Organisms and Specimens 1.3 Tools, Materials, Equipment, and Measurement

3 Chapter 2: Domain I — Measurement Systems and Scientific Data

2.1 The International System of Units and Unit Conversion 2.2 Organizing, Displaying, and Communicating Scientific Data

4 Chapter 3: Domain I — Inquiry, the Nature of Science, and Society

3.1 The Scientific Inquiry Process 3.2 The History and Nature of Science 3.3 Science in Daily Life and Societal Decisions

5 Chapter 4: Domain I — Resources, Unifying Concepts, and Models

4.1 Natural Resources, Population Growth, and Human Impact 4.2 Unifying Concepts Across the Sciences 4.3 Scientific Models: Building, Using, and Evaluating

6 Chapter 5: Domain II — Forces and Motion

5.1 Describing Motion: Kinematics and Motion Graphs 5.2 Forces and Motion 5.3 Simple Machines, Work Input, and Mechanical Advantage

7 Chapter 6: Domain II — Matter, Atoms, and Chemical Change

6.1 Physical Properties of and Changes in Matter 6.2 Atomic Structure, Isotopes, and Reading the Periodic Table 6.3 Chemical Properties of and Changes in Matter

8 Chapter 7: Domain II — Energy, Heat, and Electricity

7.1 Work, Power, and Mechanical Energy 7.2 Thermal Energy: Heat, Temperature, and Heat Transfer 7.3 Electricity and Magnetism

9 Chapter 8: Domain II — Waves and Energy Transformations

8.1 Waves: Light and Sound 8.2 Energy Transformations and the Conservation of Matter and Energy

10 Chapter 9: Domain III — Classification, Cells, and Biomolecules

9.1 Classification, Taxonomy, and Dichotomous Keys 9.2 Cell Structure and Function 9.3 Biomolecules and the Chemistry of Life

11 Chapter 10: Domain III — Organism Structure and Energy Use

10.1 Human Body Systems and Levels of Organization 10.2 Plant Structure, Function, and Transport 10.3 Photosynthesis, Cellular Respiration, and Energy Acquisition

12 Chapter 11: Domain III — Reproduction, Heredity, Evolution, and Regulation

11.1 Reproduction and the Mechanisms of Heredity 11.2 Adaptations of Organisms and the Theory of Evolution 11.3 Regulatory Mechanisms and Behavior

13 Chapter 12: Domain III — Ecosystems and Population Ecology

12.1 Ecosystems, Food Webs, and Energy Flow 12.2 Population Dynamics, Succession, and Biodiversity

14 Chapter 13: Domain IV — Earth's Structure and Spheres

13.1 The Structure and Function of Earth Systems 13.2 Surface Water, Groundwater, and the Oceans 13.3 Earth's Atmosphere: Composition, Structure, and Energy Transfer

15 Chapter 14: Domain IV — Cycles in Earth Systems and Tectonic Forces

14.1 The Rock Cycle, Minerals, and Soils 14.2 Water and Nutrient Cycles in Earth Systems 14.3 Plate Tectonics, Earthquakes, and Volcanoes

16 Chapter 15: Domain IV — Weather, Climate, and Earth History

15.1 The Role of Energy in Weather and Climate 15.2 Air Masses, Fronts, Weather Maps, and Forecasting 15.3 The History of the Earth System

17 Chapter 16: Domain IV — The Solar System and the Universe

16.1 The Solar System and the Earth-Moon-Sun System 16.2 Stars, Galaxies, and the Universe

18 Chapter 17: Domain V — Teaching Science and How Students Learn

17.1 Teaching Science and How Students Learn 17.2 Differentiation, Emergent Bilingual Support, and Inclusive Science Instruction 17.3 Questioning Strategies and Conceptual Change

19 Chapter 18: Domain V — Inquiry Instruction and Assessment

18.1 Scientific Inquiry in Science Instruction 18.2 Varied and Appropriate Assessments of Science Learning 18.3 Rubrics, Portfolios, Lab Journals, and Descriptive Feedback

2.1 The International System of Units and Unit Conversion

Key Takeaways Explain This Topic AI

The SI base units tested at grades 4-8 are the meter (length), kilogram (mass), second (time), kelvin (thermodynamic temperature), and mole (amount of substance); the ampere and candela complete the set of seven.

Metric prefixes are powers of ten, so every metric-to-metric conversion is a decimal-point move: kilo- is 10³, centi- is 10⁻², milli- is 10⁻³, micro- is 10⁻⁶, and nano- is 10⁻⁹.

Dimensional analysis converts units by multiplying by fractions equal to one, arranged so unwanted units cancel — the single most reliable method for a timed, no-calculator-needed conversion item.

1 mL = 1 cm³ exactly, and 1 L of pure water at 4 °C has a mass of about 1 kg, which is why water's density is 1.00 g/cm³ and why displacement volumes convert directly to milliliters.

Kelvin is the SI temperature unit and has no degree symbol: K = °C + 273.15, while °F = (9/5)°C + 32; a kelvin and a Celsius degree are the same size, so temperature changes are numerically identical in both scales.

Last updated: August 2026

Why the Measurement System Is Its Own Competency

Competency 002 names the international system of measurement and unit conversion as a distinct expectation. Exam items rarely ask "what is the SI unit of mass?" in isolation. They embed a conversion inside a density, speed, or concentration problem, or they ask which student error produced an answer that is off by a factor of 1,000. Fluency here protects your score across Domains II, III, and IV, because every calculated item on the test arrives in units.

SI Base Units and the Derived Units Built From Them

  • Quantity SI base unit Symbol Grades 4-8 classroom instrument
  • Length meter m Meter stick, metric ruler, tape measure
  • Mass kilogram kg Triple-beam balance, electronic balance
  • Time second s Stopwatch, photogate
  • Thermodynamic temperature kelvin K Thermometer (usually read in °C, converted)
  • Amount of substance mole mol Calculated, not directly measured
  • Electric current ampere A Ammeter
  • Luminous intensity candela cd Light meter (rare at 4-8)

Derived units are combinations of base units and are where most classroom measurement actually lives:

Volume : cubic meter (m³) in strict SI; the liter (L) is accepted for classroom use, where 1 L = 0.001 m³ = 1,000 cm³.

Density : kg/m³ in strict SI; g/cm³ or g/mL in the classroom.

Speed : m/s. Force : newton (N) = kg·m/s². Energy : joule (J) = N·m. Power : watt (W) = J/s.

Pressure : pascal (Pa) = N/m².

Notice that a newton, a joule, and a watt are all shorthand for combinations of meters, kilograms, and seconds. Being able to unpack them is what lets you check whether an answer is dimensionally sensible.

The Prefix Ladder

  • Prefix Symbol Multiplier Example
  • giga- G 10⁹ 1 GW = 1,000,000,000 W
  • mega- M 10⁶ 1 MJ = 1,000,000 J
  • kilo- k 10³ 1 km = 1,000 m
  • hecto- h 10² 1 hL = 100 L
  • deka- da 10¹ 1 dam = 10 m
  • (base) — 10⁰ 1 m
  • deci- d 10⁻¹ 1 dm = 0.1 m
  • centi- c 10⁻² 1 cm = 0.01 m
  • milli- m 10⁻³ 1 mm = 0.001 m
  • micro- µ 10⁻⁶ 1 µm = 0.000001 m
  • nano- n 10⁻⁹ 1 nm = 0.000000001 m

The classroom mnemonic "King Henry Died By Drinking Chocolate Milk" (kilo, hecto, deka, base, deci, centi, milli) helps students place the decimal point, but the exam expects you to know the two-step prefixes as well: micro- is three more places past milli-, and nano- is three past micro-.

Dimensional Analysis: The Reliable Method

Dimensional analysis multiplies the starting quantity by conversion fractions that each equal one, arranged so that unwanted units cancel.

Worked example 1 — a two-step metric conversion. Convert 2.5 km to centimeters.

2.5 km × (1,000 m / 1 km) × (100 cm / 1 m) = 2.5 × 100,000 = 250,000 cm = 2.5 × 10⁵ cm

Worked example 2 — a compound unit. A cyclist travels 54 km/h. Express this in m/s.

54 km/h × (1,000 m / 1 km) × (1 h / 3,600 s) = 54,000 / 3,600 = 15 m/s

The shortcut worth memorizing: to convert km/h to m/s, divide by 3.6; to go the other way, multiply by 3.6.

Worked example 3 — density with a unit trap. A rock has a mass of 87.5 g and displaces water from 40.0 mL to 65.0 mL. Find its density in g/cm³.

Volume = 65.0 − 40.0 = 25.0 mL = 25.0 cm³. Density = 87.5 g ÷ 25.0 cm³ = 3.50 g/cm³ . Because 1 mL = 1 cm³ exactly, no numerical conversion is needed — only the recognition that the units are interchangeable.

Water: The Reference That Ties the Units Together

Pure water at 4 °C has a density of 1.00 g/cm³. That single fact links three units:

1 cm³ = 1 mL of water = 1 g of mass , and therefore 1 L of water ≈ 1 kg .

This is why a full 2 L soda bottle has a mass of about 2 kg, and why an object with density greater than 1.00 g/cm³ sinks in fresh water while one below it floats. Exam items use it as a fast plausibility check: a student who reports a pebble's density as 0.045 g/cm³ has almost certainly made a decimal error.

Temperature Conversion

  • Reference point Celsius Kelvin Fahrenheit
  • Absolute zero −273.15 °C 0 K −459.67 °F
  • Water freezes 0 °C 273.15 K 32 °F
  • Room temperature ~22 °C ~295 K ~72 °F
  • Water boils (at 1 atm) 100 °C 373.15 K 212 °F

Conversions: K = °C + 273.15 and °F = (9/5)°C + 32 , with °C = (5/9)(°F − 32) in reverse. Kelvin uses no degree symbol — write 295 K, not 295 °K. Because a kelvin interval and a Celsius degree are the same size, a temperature change of 15 °C is also a change of 15 K, a distinction the exam tests when a specific-heat problem gives ΔT.