Study guide
7.3 Electricity and Magnetism
TExES Science 4-8 116
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Overview
About the TExES Science 4-8 (116) Exam How to Use This Guide and Study Strategy
2 Chapter 1: Domain I — Laboratory Safety and Scientific Tools
1.1 Laboratory Safety Management 1.2 Safe and Ethical Care of Living Organisms and Specimens 1.3 Tools, Materials, Equipment, and Measurement
3 Chapter 2: Domain I — Measurement Systems and Scientific Data
2.1 The International System of Units and Unit Conversion 2.2 Organizing, Displaying, and Communicating Scientific Data
4 Chapter 3: Domain I — Inquiry, the Nature of Science, and Society
3.1 The Scientific Inquiry Process 3.2 The History and Nature of Science 3.3 Science in Daily Life and Societal Decisions
5 Chapter 4: Domain I — Resources, Unifying Concepts, and Models
4.1 Natural Resources, Population Growth, and Human Impact 4.2 Unifying Concepts Across the Sciences 4.3 Scientific Models: Building, Using, and Evaluating
6 Chapter 5: Domain II — Forces and Motion
5.1 Describing Motion: Kinematics and Motion Graphs 5.2 Forces and Motion 5.3 Simple Machines, Work Input, and Mechanical Advantage
7 Chapter 6: Domain II — Matter, Atoms, and Chemical Change
6.1 Physical Properties of and Changes in Matter 6.2 Atomic Structure, Isotopes, and Reading the Periodic Table 6.3 Chemical Properties of and Changes in Matter
8 Chapter 7: Domain II — Energy, Heat, and Electricity
7.1 Work, Power, and Mechanical Energy 7.2 Thermal Energy: Heat, Temperature, and Heat Transfer 7.3 Electricity and Magnetism
9 Chapter 8: Domain II — Waves and Energy Transformations
8.1 Waves: Light and Sound 8.2 Energy Transformations and the Conservation of Matter and Energy
10 Chapter 9: Domain III — Classification, Cells, and Biomolecules
9.1 Classification, Taxonomy, and Dichotomous Keys 9.2 Cell Structure and Function 9.3 Biomolecules and the Chemistry of Life
11 Chapter 10: Domain III — Organism Structure and Energy Use
10.1 Human Body Systems and Levels of Organization 10.2 Plant Structure, Function, and Transport 10.3 Photosynthesis, Cellular Respiration, and Energy Acquisition
12 Chapter 11: Domain III — Reproduction, Heredity, Evolution, and Regulation
11.1 Reproduction and the Mechanisms of Heredity 11.2 Adaptations of Organisms and the Theory of Evolution 11.3 Regulatory Mechanisms and Behavior
13 Chapter 12: Domain III — Ecosystems and Population Ecology
12.1 Ecosystems, Food Webs, and Energy Flow 12.2 Population Dynamics, Succession, and Biodiversity
14 Chapter 13: Domain IV — Earth's Structure and Spheres
13.1 The Structure and Function of Earth Systems 13.2 Surface Water, Groundwater, and the Oceans 13.3 Earth's Atmosphere: Composition, Structure, and Energy Transfer
15 Chapter 14: Domain IV — Cycles in Earth Systems and Tectonic Forces
14.1 The Rock Cycle, Minerals, and Soils 14.2 Water and Nutrient Cycles in Earth Systems 14.3 Plate Tectonics, Earthquakes, and Volcanoes
16 Chapter 15: Domain IV — Weather, Climate, and Earth History
15.1 The Role of Energy in Weather and Climate 15.2 Air Masses, Fronts, Weather Maps, and Forecasting 15.3 The History of the Earth System
17 Chapter 16: Domain IV — The Solar System and the Universe
16.1 The Solar System and the Earth-Moon-Sun System 16.2 Stars, Galaxies, and the Universe
18 Chapter 17: Domain V — Teaching Science and How Students Learn
17.1 Teaching Science and How Students Learn 17.2 Differentiation, Emergent Bilingual Support, and Inclusive Science Instruction 17.3 Questioning Strategies and Conceptual Change
19 Chapter 18: Domain V — Inquiry Instruction and Assessment
18.1 Scientific Inquiry in Science Instruction 18.2 Varied and Appropriate Assessments of Science Learning 18.3 Rubrics, Portfolios, Lab Journals, and Descriptive Feedback
7.3 Electricity and Magnetism
Key Takeaways Explain This Topic AI
Ohm's law, V = IR, links voltage, current, and resistance; holding voltage constant, current is inversely proportional to resistance.
In a series circuit the current is identical everywhere and resistances add, so one break opens the whole loop; in a parallel circuit the voltage across each branch is the same and the branches operate independently.
Charge is conserved in every electrical process: rubbing transfers electrons from one object to another rather than creating charge, and a bulb transforms energy without consuming current.
An electric current always produces a magnetic field, and a changing magnetic field always induces a voltage — the paired effects behind motors and generators respectively.
Household wiring is parallel so that each appliance receives full line voltage and operates independently, with fuses or breakers opening the circuit when current exceeds a safe value.
Last updated: August 2026
Quick Answer: Electricity and magnetism are two faces of one electromagnetic interaction. Charge that is stationary produces static effects; charge in motion is a current governed by Ohm's law (V = IR) and by the series-versus-parallel rules; a current always creates a magnetic field, and a changing magnetic field always induces a voltage. Those paired effects are what motors, generators, speakers, and transformers exploit.
Work, power, kinetic energy, and potential energy are developed in "Work, Power, and Mechanical Energy."
Heat, temperature, specific heat, and the three modes of heat transfer are developed in "Thermal Energy: Heat, Temperature, and Heat Transfer."
Electricity: Charge, Current, Voltage, Resistance
Electric charge is measured in coulombs (C); the charge on one electron is −1.6 × 10⁻¹⁹ C. Current (I) is the flow of charge per unit time, measured in amperes (A) = C/s. Voltage (V) , or potential difference, is the energy per unit charge, in volts (V) = J/C — it is the "push" that drives current. Resistance (R) opposes current flow, in ohms (Ω).
Ohm's law : V = I × R . A typical exam-style calculation: a 6 V battery drives current through a 3 Ω resistor — I = V/R = 6/3 = 2 A . If the resistance doubles to 6 Ω, the current falls to 1 A.
Series and Parallel Circuits
- Property Series Circuit Parallel Circuit
- Current Same everywhere (I_total = I₁ = I₂) Splits across branches; I_total = I₁ + I₂ + …
- Voltage Splits across resistors; V_total = V₁ + V₂ + … Same across each branch (V_total = V₁ = V₂)
- Resistance R_total = R₁ + R₂ + … (adds) 1/R_total = 1/R₁ + 1/R₂ + … (total is less than smallest)
- A bulb burns out Whole circuit opens, all bulbs go dark Other branches keep working
- Household wiring Not used for wall outlets Used so each appliance works independently
Texas homes are wired in parallel so that turning off one lamp does not kill power to every other outlet on the same circuit. Series circuits are useful for switches and fuses that must break the whole loop.
Magnetism and Electromagnetism
A magnet has two poles (north and south); like poles repel and unlike poles attract, and magnetic field lines run from N to S outside the magnet. Electromagnetism is the interaction of electric current and magnetic fields: a current-carrying wire creates a circular magnetic field (right-hand rule), and a wire carrying current in an external magnetic field feels a force — the basis of a motor.
Device What it does Core principle
Electromagnet A coil (solenoid) wrapped around an iron core that becomes magnetic only when current flows Current → magnetic field; iron core amplifies it
Electric motor Converts electrical energy to rotational mechanical energy Current-carrying coil in a magnetic field experiences a torque
Generator Converts mechanical energy to electrical energy (the inverse of a motor) Moving a coil through a field induces a voltage (electromagnetic induction)
Transformer Steps AC voltage up or down Changing current in the primary coil induces a voltage in the secondary coil; turns ratio sets the voltage
Audio speaker Converts electrical signal to sound Current in a coil attached to a cone interacts with a permanent magnet, pushing the cone to make sound waves
Nerve impulse Electrical signal along a neuron Movement of Na⁺ and K⁺ ions changes the membrane potential; an action potential is an electrical wave, not a current in a wire
Lightning A massive static discharge Charge separation in a thundercloud builds a huge voltage until air ionizes and current flows to ground
These applications connect the abstract electricity/magnetism ideas to Texas 4-8 contexts: students can build a simple electromagnet from a nail, a D-cell, and insulated wire, and observe that more coil turns or more current produce a stronger field.
Static Electricity and Charge Transfer
Before current electricity, students meet static electricity : an imbalance of charge on an object's surface. Rubbing a balloon on hair transfers electrons from the hair to the balloon, leaving the balloon negative and the hair positive. Three principles govern what follows:
Charge is conserved. Electrons move; they are never created or destroyed. The balloon gains exactly what the hair loses.
Like charges repel, unlike charges attract , and a charged object attracts a neutral one by induction , pushing like charges to the far side of the neutral object.
Grounding neutralizes an object by providing a path for excess charge to Earth, which is why lightning rods and antistatic wrist straps work.
Lightning is static discharge at enormous scale: charge separation within a thundercloud builds a potential difference of hundreds of millions of volts until the air ionizes and a current flows.
Conductors, Insulators, and Electrical Safety
Conductors — copper, aluminum, salt water, the human body — contain charges free to move. Insulators — rubber, glass, dry wood, plastic — hold their electrons tightly. This distinction is the basis of every safety rule in a 4-8 electricity unit: use insulated wire, never operate electrical equipment with wet hands, and use only low-voltage battery sources rather than wall current for student circuits. A fuse or circuit breaker protects a circuit by opening it when current exceeds a safe value, and a short circuit — a low-resistance path that bypasses the load — produces exactly that dangerous surge.
Earth's Magnetic Field and Electromagnetic Induction
Earth behaves as though a giant bar magnet sits near its center, generated by convection of molten iron in the outer core. A compass needle aligns with this field, which is why the needle's north-seeking pole points toward Earth's magnetic north pole — a location that is geographically near, but not identical to, the geographic North Pole, and that migrates measurably from year to year.
Electromagnetic induction is the reverse of the motor effect: moving a magnet through a coil, or moving a coil through a magnetic field, induces a voltage in the coil. Faraday's discovery underlies every generator, and therefore nearly all electricity in the Texas grid. A coal, gas, nuclear, or wind plant differs only in what turns the turbine; the turbine spins a coil in a magnetic field, and induction does the rest. That single idea connects this section to the energy-transformation material in Section 8.2.