Study guide

5.1 Describing Motion: Kinematics and Motion Graphs

TExES Science 4-8 116

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

About the TExES Science 4-8 (116) Exam How to Use This Guide and Study Strategy

2 Chapter 1: Domain I — Laboratory Safety and Scientific Tools

1.1 Laboratory Safety Management 1.2 Safe and Ethical Care of Living Organisms and Specimens 1.3 Tools, Materials, Equipment, and Measurement

3 Chapter 2: Domain I — Measurement Systems and Scientific Data

2.1 The International System of Units and Unit Conversion 2.2 Organizing, Displaying, and Communicating Scientific Data

4 Chapter 3: Domain I — Inquiry, the Nature of Science, and Society

3.1 The Scientific Inquiry Process 3.2 The History and Nature of Science 3.3 Science in Daily Life and Societal Decisions

5 Chapter 4: Domain I — Resources, Unifying Concepts, and Models

4.1 Natural Resources, Population Growth, and Human Impact 4.2 Unifying Concepts Across the Sciences 4.3 Scientific Models: Building, Using, and Evaluating

6 Chapter 5: Domain II — Forces and Motion

5.1 Describing Motion: Kinematics and Motion Graphs 5.2 Forces and Motion 5.3 Simple Machines, Work Input, and Mechanical Advantage

7 Chapter 6: Domain II — Matter, Atoms, and Chemical Change

6.1 Physical Properties of and Changes in Matter 6.2 Atomic Structure, Isotopes, and Reading the Periodic Table 6.3 Chemical Properties of and Changes in Matter

8 Chapter 7: Domain II — Energy, Heat, and Electricity

7.1 Work, Power, and Mechanical Energy 7.2 Thermal Energy: Heat, Temperature, and Heat Transfer 7.3 Electricity and Magnetism

9 Chapter 8: Domain II — Waves and Energy Transformations

8.1 Waves: Light and Sound 8.2 Energy Transformations and the Conservation of Matter and Energy

10 Chapter 9: Domain III — Classification, Cells, and Biomolecules

9.1 Classification, Taxonomy, and Dichotomous Keys 9.2 Cell Structure and Function 9.3 Biomolecules and the Chemistry of Life

11 Chapter 10: Domain III — Organism Structure and Energy Use

10.1 Human Body Systems and Levels of Organization 10.2 Plant Structure, Function, and Transport 10.3 Photosynthesis, Cellular Respiration, and Energy Acquisition

12 Chapter 11: Domain III — Reproduction, Heredity, Evolution, and Regulation

11.1 Reproduction and the Mechanisms of Heredity 11.2 Adaptations of Organisms and the Theory of Evolution 11.3 Regulatory Mechanisms and Behavior

13 Chapter 12: Domain III — Ecosystems and Population Ecology

12.1 Ecosystems, Food Webs, and Energy Flow 12.2 Population Dynamics, Succession, and Biodiversity

14 Chapter 13: Domain IV — Earth's Structure and Spheres

13.1 The Structure and Function of Earth Systems 13.2 Surface Water, Groundwater, and the Oceans 13.3 Earth's Atmosphere: Composition, Structure, and Energy Transfer

15 Chapter 14: Domain IV — Cycles in Earth Systems and Tectonic Forces

14.1 The Rock Cycle, Minerals, and Soils 14.2 Water and Nutrient Cycles in Earth Systems 14.3 Plate Tectonics, Earthquakes, and Volcanoes

16 Chapter 15: Domain IV — Weather, Climate, and Earth History

15.1 The Role of Energy in Weather and Climate 15.2 Air Masses, Fronts, Weather Maps, and Forecasting 15.3 The History of the Earth System

17 Chapter 16: Domain IV — The Solar System and the Universe

16.1 The Solar System and the Earth-Moon-Sun System 16.2 Stars, Galaxies, and the Universe

18 Chapter 17: Domain V — Teaching Science and How Students Learn

17.1 Teaching Science and How Students Learn 17.2 Differentiation, Emergent Bilingual Support, and Inclusive Science Instruction 17.3 Questioning Strategies and Conceptual Change

19 Chapter 18: Domain V — Inquiry Instruction and Assessment

18.1 Scientific Inquiry in Science Instruction 18.2 Varied and Appropriate Assessments of Science Learning 18.3 Rubrics, Portfolios, Lab Journals, and Descriptive Feedback

5.1 Describing Motion: Kinematics and Motion Graphs

Key Takeaways Explain This Topic AI

Distance and speed are scalars with magnitude only; displacement, velocity, and acceleration are vectors that also carry direction, so a runner who completes a 400 m lap has traveled 400 m but has zero displacement and zero average velocity.

Acceleration is any change in velocity — speeding up, slowing down, or changing direction — which is why a car rounding a curve at constant speed is accelerating.

On a distance-time graph the slope is speed: a straight line means constant speed, a steeper line means faster, a curve means changing speed, and a horizontal line means at rest.

On a velocity-time graph the slope is acceleration and the area under the curve is displacement; a horizontal line here means constant velocity, not at rest.

Near Earth's surface free-falling objects accelerate at about 9.8 m/s² regardless of mass, so a dropped object gains roughly 10 m/s of downward speed each second until air resistance balances gravity at terminal velocity.

Last updated: August 2026

Why Kinematics Gets Its Own Section

Motion is the entry point to Domain II, and the framework asks specifically that teachers can "measure, graph and describe" changes in motion. Exam items in this space are heavily graph-based, because interpreting a motion graph is the skill that distinguishes a teacher who can diagnose student thinking from one who can only recite a formula. The single most common student error — reading a distance-time graph as if it were a picture of the path — is directly testable.

Scalars Versus Vectors

  • Quantity Type Definition Unit Example
  • Distance Scalar Total path length traveled m 400 m around a track
  • Displacement Vector Straight-line change in position, start to finish m 0 m after one full lap
  • Speed Scalar Distance ÷ time m/s 8 m/s average
  • Velocity Vector Displacement ÷ time m/s 2 m/s east
  • Acceleration Vector Change in velocity ÷ time m/s² 3 m/s² east

Distance is always greater than or equal to the magnitude of displacement. A student who walks 3 m east, then 4 m north has traveled a distance of 7 m but has a displacement of 5 m northeast (the 3-4-5 right triangle). Exam items exploit this pairing constantly.

Speed, Velocity, and Acceleration

Average speed = total distance ÷ total time. A bus that covers 240 km in 3 h averages 80 km/h even if it stopped twice; average speed says nothing about what happened in between. Instantaneous speed is the reading on a speedometer at one moment.

Acceleration is defined as a = Δv / Δt = (v_f − v_i) / t , with units of m/s². Three situations all count as acceleration:

Speeding up — a bicycle going from 2 m/s to 8 m/s in 3 s accelerates at (8 − 2)/3 = +2 m/s² .

Slowing down — a car going from 20 m/s to 0 in 4 s accelerates at (0 − 20)/4 = −5 m/s² . Negative acceleration in this case means deceleration; it does not automatically mean "moving backward."

Changing direction — a car circling a track at a constant 15 m/s has changing velocity because the direction changes, so it is accelerating even though the speedometer never moves.

The Constant-Acceleration Equations

For motion with uniform acceleration:

  • v = v₀ + at
  • Δx = v₀t + ½at²
  • v² = v₀² + 2aΔx

Worked example. A skateboarder starts from rest and accelerates at 1.5 m/s² for 4.0 s. How fast is she going, and how far has she traveled?

  • v = 0 + (1.5)(4.0) = 6.0 m/s
  • Δx = 0 + ½(1.5)(4.0²) = ½(1.5)(16) = 12 m

Check with equation 3: v² = 0 + 2(1.5)(12) = 36, so v = 6.0 m/s. Consistency across two routes is a good habit to model for students.

Free Fall

Near Earth's surface, gravity accelerates all objects downward at g ≈ 9.8 m/s² regardless of mass, once air resistance is negligible. A rock dropped from rest is moving at 9.8 m/s after 1 s, 19.6 m/s after 2 s, and 29.4 m/s after 3 s. It falls ½(9.8)(1²) = 4.9 m in the first second but ½(9.8)(2²) − 4.9 = 14.7 m during the second second, because distance grows with t².

Air resistance is what breaks the pattern in a real classroom. A flat sheet of paper and a book dropped together do not land together; crumple the paper and they nearly do. As a falling object speeds up, air resistance grows until it equals the weight; at that point the net force is zero, acceleration stops, and the object descends at constant terminal velocity . This is a favorite item stem because students expect "heavier falls faster" and the correct explanation names air resistance rather than mass.

Reading Motion Graphs

Distance-time (position-time) graphs — slope is speed.

  • What the graph shows What the object is doing
  • Horizontal line At rest; position is not changing
  • Straight line, gentle upward slope Moving away at a slow constant speed
  • Straight line, steep upward slope Moving away at a fast constant speed
  • Upward curve getting steeper Speeding up
  • Upward curve flattening out Slowing down
  • Straight line sloping downward Returning toward the starting point

Velocity-time graphs — slope is acceleration, area is displacement.

  • What the graph shows What the object is doing
  • Horizontal line above zero Constant velocity (moving, not stopped)
  • Horizontal line at zero At rest
  • Straight line sloping up Constant positive acceleration
  • Straight line sloping down toward zero Slowing at a constant rate
  • Line crossing zero into negative Reversing direction

The area under a velocity-time graph gives displacement. For an object moving at a constant 6 m/s for 5 s, the area is a rectangle: 6 × 5 = 30 m. For an object accelerating uniformly from 0 to 6 m/s over 5 s, the area is a triangle: ½(5)(6) = 15 m.

The Misconception to Plan For

Middle-school students routinely read a distance-time graph as a map of the path . Shown a distance-time graph with a rising straight line, they say "the object went up a hill." The instructional fix is to have students physically walk a graph using a motion detector: the graph is drawn in real time as they move toward and away from the sensor, which makes the axes' meaning concrete before any equations appear.