Study guide

5.2 Blowdrying, Thermal Curling, and Thermal Tool Safety

Tennessee Barber License Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Tennessee Master Barber Exam and Licensure Requirements

1.1 The 2026 Tennessee Master Barber Exams: PSI Theory Blueprint, Practical Test, and Fees 1.2 General Licensure Requirements: Scope of Barbering, License Types, Hours, and Qualifications 1.3 Renewal, Late Renewal, Reinstatement, Retirement, Inactive Status, and Reciprocity 1.4 The Board, Communicating With It, and Disciplinary Actions 1.5 Displaying the License, Mobile Shops, and Residential Barber Services 1.6 Barber Shop Requirements: Registration, Equipment, Location Changes, Contact Information, and Ownership

2 Rights and Responsibilities and Tennessee Sanitary Rules

2.1 Rights and Responsibilities: Owner and Manager Duties, Required Postings, and Client-Rights Signs 2.2 Tennessee Sanitary Rules I: Inspections, Facilities, Equipment, Attire, Laundry, Animals, Trash, and Communicable Diseases 2.3 Tennessee Sanitary Rules II: Disinfection Standards, Towels, Combs, Products, Prohibited Substances, and Alcoholic Beverages

3 Safety and Infection Control

3.1 Microbiology: Pathogens, Transmission, and Public Health 3.2 The Three Levels of Infection Control 3.3 Tool Disinfection and Implement Sanitation Protocols 3.4 Blood Exposure Procedures, First Aid, and OSHA's Bloodborne Pathogens Standard 3.5 Chemical Safety: Labeling and Storage, Safety Data Sheets, Federal Agencies, Adverse Reactions, and Ventilation 3.6 Client Protection: Draping, Chemical Barriers, and Headrest Covers 3.7 Safe Working Conditions: Water Temperature, Equipment Maintenance, and Electrical Safety

4 Client Consultation and Hair and Skin Analysis

4.1 Client Consultation: Intake and Release Forms, Contraindications, and Medical Referral 4.2 Skin Structure, Functions, Glands, and Dermatological Disorders 4.3 Hair Anatomy, Chemical Composition, and Growth Phases 4.4 Trichology: Hair Properties, Scalp Disorders, and Alopecia

5 Hairstyling

5.1 Textured Hairstyling, Extensions, Locks, Braids, and Hairpieces 5.2 Blowdrying, Thermal Curling, and Thermal Tool Safety

6 Haircutting and Haircutting Tool Safety

6.1 Principles of Haircutting: Reference Points, Angles, and Elevation 6.2 Scissor and Shear Cutting Techniques 6.3 Clipper Cutting, Tapering, and Fading 6.4 Outlining, Neckline Finishing, and Hair Texturizing 6.5 Haircutting Tool Safety I: Shears, Thinning Shears, and Their Maintenance 6.6 Haircutting Tool Safety II: Clippers, Trimmers, Blades, and Guards

7 Haircoloring

7.1 Color Theory, Color Wheel, and Natural Hair Pigments 7.2 Classifications of Haircolor: Temporary to Permanent 7.3 Lightening, Developers, Toners, and Fillers 7.4 Haircolor Safety: Patch Tests, Strand Tests, Chemical Precautions, and Coloring Facial Hair

8 Chemical Texture Services

8.1 Chemistry of Texture: Hair Bonds and the pH Scale 8.2 Permanent Waving: Chemistry, Rods, Wrapping, and Neutralization 8.3 Chemical Hair Relaxers and Reformation

9 Skin Care, Facial Massage, and Scalp Treatments

9.1 Anatomy of the Head, Face, and Neck for Massage and Shaving 9.2 Facial and Scalp Massage, Scalp Treatments, and Electrotherapy 9.3 Facials, Exfoliation, Skin Care Products and Machines, and Hot Towels

10 Shaving

10.1 Shaving Fundamentals: The Four Razor Strokes and the 14 Shaving Areas 10.2 Shave Preparation, Hot Towels, and Lather Application 10.3 The Standard Shave Service: First-Time-Over and Close Shaving 10.4 Shaving Safety: Contraindications, Facial Hair Types, Razor Handling, and Shaving Around the Mouth and Ears 10.5 Mustache, Beard, and Goatee Design and Maintenance 10.6 Straight Razors, Changeable-Blade Razors, Honing, Stropping, and Blade Disposal

5.2 Blowdrying, Thermal Curling, and Thermal Tool Safety

Key Takeaways Explain This Topic AI

Blowdrying and thermal styling temporarily break and re-form hydrogen bonds, so the style holds until the hair gets wet or humid again.

Direct blowdryer airflow from the scalp toward the ends to smooth the cuticle, keep the dryer moving, and use a nozzle to focus air or a diffuser to dry curly hair without frizz.

Test a thermal iron's temperature on a tissue or test strand before use; scorching or smoking means it is too hot for the client's hair.

Place a comb between the hot iron and the scalp to protect the skin, and keep hot tools away from the ears, forehead, and neck.

Use lower heat on fine, lightened, gray, or damaged hair, apply a heat protectant, and never use a hot tool on hair that has been chemically compromised or is still wet.

Last updated: September 2026

Why this topic matters

The Hairstyling domain also includes blowdrying procedures , thermal curling procedures , and precautions for use of thermal styling tools (e.g., testing temperature, protecting scalp) . These are the heat services most likely to burn a client, so PSI's questions focus on safety as much as technique. Tennessee's master barber curriculum includes haircutting, hairstyling, and hairsetting, and the student kit required after 100 hours includes a blow dryer , a curling iron , vent-type brushes, and styling brushes (Rule 0200-01-.15).

The science: hydrogen bonds

Water and heat break the weak hydrogen bonds between keratin chains. As hair dries or cools in a new shape, those bonds re-form and hold it. That is why a blowout or iron curl is temporary . It lasts until water, sweat, or humidity breaks the hydrogen bonds again. Disulfide bonds, the ones perms and relaxers change, are not affected by normal thermal styling.

  • Blowdrying
  • Parts and attachments
  • Part Purpose
  • Handle, switches, cord Heat and speed settings; a cool-shot button sets the style
  • Air intake with filter Draws air in at the back; clean it regularly so the motor does not overheat
  • Nozzle (concentrator) Directs a narrow stream of air for smoothing and control
  • Diffuser Spreads the airflow to dry curly or wavy hair gently with less frizz
  • Brushes

Vent brush: fast drying and loose direction.

Round brush: volume, bend, and smoothness. A smaller barrel gives more curl.

Paddle or cushion brush: smoothing larger sections.

Styling or grooming brush: finishing short men's styles.

Technique

Towel-blot and comb out the hair, and apply a heat protectant or styling product.

Rough-dry to remove excess moisture, directing air down the hair shaft from scalp to ends so the cuticle lies flat.

Section the hair and dry each section with a brush. To create volume , lift the base and direct air at the root. To keep the hair flat , dry it in the direction it will be worn.

Keep the dryer moving. Holding it in one spot overheats the hair and the scalp.

Aim the nozzle away from the scalp and ears . Keep it a few inches from the hair and tilted along the brush.

Finish with the cool shot to set the shape, then apply finishing product.

For curly or tightly coiled hair: a diffuser dries curls without breaking up the pattern. Stretching coily hair with a brush and dryer before thermal styling needs gentle tension and moderate heat.

Thermal curling

Thermal irons include the traditional Marcel iron (a stove-heated or electric iron with a rod and a shell) and modern electric curling irons.

  • Parts
  • Rod (prong): the solid round barrel the hair wraps around
  • Shell (groove or clamp): the curved half that closes over the hair

Handles: open and close the shell. In a "click" technique, the barber rolls the iron and opens and closes the shell to move hair smoothly without crimping it.

Base placement and volume

  • Base Iron placement Result
  • Volume (on base) Hair held up and the iron placed on top of the base Most lift at the root
  • Full base Iron centered on the base Strong curl with full lift
  • Half base Iron placed half off the base Moderate lift
  • Off base Iron placed completely off the base Least lift; curl sits below the base
  • Procedure

Start with clean, completely dry hair.

Take sections no wider or deeper than the iron can handle.

Place a comb between the iron and the scalp to protect the skin.

Insert the ends evenly and roll the iron to wind the hair. Keep the ends inside the shell so they do not "fishhook."

Hold only long enough to set the curl, then release and let it cool before combing out.

Flat irons and pressing

Flat irons smooth hair between two heated plates. Use small sections, move the iron steadily from base to ends, and do not iron wet hair . Trapped water flashes to steam and damages the cuticle. Pressing combs (thermal straightening) follow the same safety rules, plus extra care near the hairline.

Precautions for thermal tools

PSI names two precautions, testing temperature and protecting the scalp . Here is the full safety list.

Testing temperature

Test a heated iron on a white tissue or cloth or on a test strand before using it on the client. Scorching, yellowing, or smoke means it is too hot.

Use lower heat on fine, lightened, gray, color-treated, or damaged hair. Coarse, resistant hair can take more heat, but still use only what the hair needs.

Adjustable professional irons let you set the temperature. Start low and raise it only as needed.

Protecting the scalp and skin

Keep a heat-resistant comb between the iron and the scalp. Do not use a celluloid or flammable comb.

Shield the ears, forehead, and neck . Warn the client before bringing a hot tool near the face.

Never rest a hot tool on the client, the cape, or the station surface. Use a heat-resistant stand .

Protecting the hair

Use a heat protectant .

Do not thermal-style hair that is chemically weakened , such as over-lightened or just relaxed, unless the manufacturer allows it. The hair can break or melt.

Keep synthetic hairpieces and extensions away from heat unless they are rated for it.

Tool care and electrical safety

Clean product buildup off irons when they are cool and unplugged.

Inspect cords and plugs, keep tools away from water, and unplug them after use (section 3.7).

Disinfect combs and brushes between clients by cleaning and full immersion. Remove hair from brushes first.

If a burn happens

Stop the service and remove the heat source.

Cool the burn under cool, not ice-cold, running water for several minutes.

Do not apply butter, ointment, or ice. Cover it lightly with a clean, dry dressing.

Refer the client to a physician if the burn blisters, is large, or is on the face, and record the incident.

Exam checklist

Air goes scalp to ends .

Diffuser for curls, nozzle for focused smoothing.

Comb between iron and scalp.

Tissue test for iron temperature.

Lower heat for fine, lightened, or damaged hair.

Styles made with heat change hydrogen bonds only .