Study guide

5.1 Textured Hairstyling, Extensions, Locks, Braids, and Hairpieces

Tennessee Barber License Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Tennessee Master Barber Exam and Licensure Requirements

1.1 The 2026 Tennessee Master Barber Exams: PSI Theory Blueprint, Practical Test, and Fees 1.2 General Licensure Requirements: Scope of Barbering, License Types, Hours, and Qualifications 1.3 Renewal, Late Renewal, Reinstatement, Retirement, Inactive Status, and Reciprocity 1.4 The Board, Communicating With It, and Disciplinary Actions 1.5 Displaying the License, Mobile Shops, and Residential Barber Services 1.6 Barber Shop Requirements: Registration, Equipment, Location Changes, Contact Information, and Ownership

2 Rights and Responsibilities and Tennessee Sanitary Rules

2.1 Rights and Responsibilities: Owner and Manager Duties, Required Postings, and Client-Rights Signs 2.2 Tennessee Sanitary Rules I: Inspections, Facilities, Equipment, Attire, Laundry, Animals, Trash, and Communicable Diseases 2.3 Tennessee Sanitary Rules II: Disinfection Standards, Towels, Combs, Products, Prohibited Substances, and Alcoholic Beverages

3 Safety and Infection Control

3.1 Microbiology: Pathogens, Transmission, and Public Health 3.2 The Three Levels of Infection Control 3.3 Tool Disinfection and Implement Sanitation Protocols 3.4 Blood Exposure Procedures, First Aid, and OSHA's Bloodborne Pathogens Standard 3.5 Chemical Safety: Labeling and Storage, Safety Data Sheets, Federal Agencies, Adverse Reactions, and Ventilation 3.6 Client Protection: Draping, Chemical Barriers, and Headrest Covers 3.7 Safe Working Conditions: Water Temperature, Equipment Maintenance, and Electrical Safety

4 Client Consultation and Hair and Skin Analysis

4.1 Client Consultation: Intake and Release Forms, Contraindications, and Medical Referral 4.2 Skin Structure, Functions, Glands, and Dermatological Disorders 4.3 Hair Anatomy, Chemical Composition, and Growth Phases 4.4 Trichology: Hair Properties, Scalp Disorders, and Alopecia

5 Hairstyling

5.1 Textured Hairstyling, Extensions, Locks, Braids, and Hairpieces 5.2 Blowdrying, Thermal Curling, and Thermal Tool Safety

6 Haircutting and Haircutting Tool Safety

6.1 Principles of Haircutting: Reference Points, Angles, and Elevation 6.2 Scissor and Shear Cutting Techniques 6.3 Clipper Cutting, Tapering, and Fading 6.4 Outlining, Neckline Finishing, and Hair Texturizing 6.5 Haircutting Tool Safety I: Shears, Thinning Shears, and Their Maintenance 6.6 Haircutting Tool Safety II: Clippers, Trimmers, Blades, and Guards

7 Haircoloring

7.1 Color Theory, Color Wheel, and Natural Hair Pigments 7.2 Classifications of Haircolor: Temporary to Permanent 7.3 Lightening, Developers, Toners, and Fillers 7.4 Haircolor Safety: Patch Tests, Strand Tests, Chemical Precautions, and Coloring Facial Hair

8 Chemical Texture Services

8.1 Chemistry of Texture: Hair Bonds and the pH Scale 8.2 Permanent Waving: Chemistry, Rods, Wrapping, and Neutralization 8.3 Chemical Hair Relaxers and Reformation

9 Skin Care, Facial Massage, and Scalp Treatments

9.1 Anatomy of the Head, Face, and Neck for Massage and Shaving 9.2 Facial and Scalp Massage, Scalp Treatments, and Electrotherapy 9.3 Facials, Exfoliation, Skin Care Products and Machines, and Hot Towels

10 Shaving

10.1 Shaving Fundamentals: The Four Razor Strokes and the 14 Shaving Areas 10.2 Shave Preparation, Hot Towels, and Lather Application 10.3 The Standard Shave Service: First-Time-Over and Close Shaving 10.4 Shaving Safety: Contraindications, Facial Hair Types, Razor Handling, and Shaving Around the Mouth and Ears 10.5 Mustache, Beard, and Goatee Design and Maintenance 10.6 Straight Razors, Changeable-Blade Razors, Honing, Stropping, and Blade Disposal

5.1 Textured Hairstyling, Extensions, Locks, Braids, and Hairpieces

Key Takeaways Explain This Topic AI

T.C.A. 62-3-105 includes hair weaving (excluding medical or surgical procedures) and cutting, fitting, measuring, and forming head caps for wigs or hairpieces in the practice of barbering.

Extension methods include sewn-in wefts on a braided track, bonded wefts, fusion strands, tape-ins, and micro-links, and each needs its own removal method and a scalp check for tension damage.

Locks can be started with comb coils, two-strand twists, braids, palm rolling, or interlocking, and new growth is maintained by palm rolling or interlocking with residue-free products.

Tight braids, heavy extensions, and repeated tension can cause traction alopecia, so check for pain, bumps, and thinning at the hairline and loosen styles that pull.

A hairpiece is custom-fitted from a template taken over the balding area, attached with tape, liquid adhesive, or clips, and cleaned by removing adhesive with the manufacturer's solvent before gentle shampooing.

Last updated: September 2026

Why this topic matters

Domain III, Hairstyling , is 4 percent of the theory test. Its first two subtopics are procedures for textured hairstyling (hair extension application, maintenance, and removal; locking; braiding) and procedures for hair additions, replacements, and enhancements (hairpiece application, maintenance, and removal). These services are also barbering under Tennessee law. T.C.A. § 62-3-105 lists "hair weaving, excluding medical or surgical procedures" and "cutting, fitting, measuring and forming head caps for wigs or hair pieces." The Board's 1,500-hour curriculum includes hairpiece sales and service and hairpiece fitting.

Hair extensions

Hair extensions add length, volume, or color by attaching human or synthetic hair to the client's natural hair.

Method How it attaches Removal and cautions

Sew-in (weave) Natural hair is cornrowed into a braided track, and a weft is sewn to the track with a curved needle and thread Cut the thread carefully without cutting natural hair, then unbraid; do not leave in so long that new growth mats at the base

Bonding Adhesive is applied to the weft and attached at the base of the natural hair Dissolve the bond with the manufacturer's remover, often oil-based; patch-test the adhesive for allergies; keep glue off the scalp

Fusion Small strands with keratin or polymer tips are heat-bonded strand by strand Use the maker's bond remover and pliers; heat near the scalp needs care

Tape-in Thin wefts with medical-grade tape sandwich a thin slice of natural hair Use an adhesive remover; keep conditioner and oils off the tape area

Micro-link (bead or ring) Small strands are threaded with natural hair through a bead that is clamped shut Open the bead with pliers and slide it off; watch for tension breakage at the bead

Clip-in Wefts with pressure clips are attached by the client or barber Remove daily; clips can pull on fine hair

Human hair vs. synthetic hair

Human hair can be heat-styled and chemically processed with care, and it wears like natural hair.

Synthetic fiber keeps a set pattern and costs less, but many synthetics melt under hot tools and cannot be colored with hair dye .

A strand test tells them apart. Human hair burns slowly with the smell of burning hair and leaves a powdery ash. Synthetic fiber flames or melts into a hard bead.

Consultation and maintenance

Check the scalp for irritation, open sores, or thinning before attaching anything. Extensions add weight and tension to each follicle.

Match the extension texture and color to the client's hair, and blend the finished style by cutting the extension hair together with the natural hair.

Schedule maintenance appointments as the method requires. As natural hair grows, attachments move away from the scalp and can mat or pull.

Tell clients to clean the scalp gently, dry the attachment area fully, and avoid sleeping on wet hair.

Locking

Locks (also spelled locs, or dreadlocks) are sections of hair that coil and mesh into matted strands. Common starting methods:

Comb coils: small sections twisted into coils with a fine-tooth comb. Best for short, tightly curled hair.

Two-strand twists: each section is twisted from two strands. They lock more slowly but look defined early.

Braids or plaits: sections are braided and allowed to lock. The braid pattern may show for a while.

Palm rolling: each lock is rolled between damp palms to encourage coiling and neaten new growth.

Interlocking: new growth is pulled through the base of the lock with a tool or the fingers. This tightens the root without product buildup.

Backcombing: used on straighter textures to start the matting.

Locks go through stages, from starter or budding , to a teen stage where they swell and frizz, to mature locks that are dense and hold their shape. For maintenance, use residue-free shampoo , rinse thoroughly, dry completely to prevent mildew and odor, avoid heavy waxes that build up, and do not retighten too often or too tightly. Thinning at the lock base or the hairline is a sign of too much tension or weight.

Braiding

Three-strand braid: crossing the outer strands over the center makes an overhand braid that lies flat, as in a French braid. Crossing them under makes an underhand braid that stands up from the scalp, as in a Dutch braid or cornrow.

Cornrows are narrow underhand braids worked close to the scalp in rows, often used as the foundation for a sew-in.

Individual (box) braids are free-hanging braids from separate square or triangular partings, with or without added fiber.

Twists (two-strand or rope twists) twist rather than braid the strands.

Safety rules for braiding

Use clean, even partings and moderate tension.

Tight braids cause pain, bumps, and pustules at the follicle and, over time, traction alopecia . The hairline and temples thin first.

If the client feels pain or you see raised bumps or broken hair along the hairline, loosen or redo the style.

Advise clients to wear braids for a limited time and give the hairline a rest between styles.

Hairpieces and hair replacement

Men's hairpieces (also called hair replacement systems or toupees) cover a thinning or balding area with a custom base holding human or synthetic hair.

  • Base materials
  • Lace: very natural hairline but delicate
  • Monofilament: durable mesh with a natural-looking part
  • Polyurethane ("skin"): easy to clean and tape, less breathable

Hair is attached to the base by hand-tying (knotting, also called ventilating) or by machine-made wefts.

Measuring and fitting

Measure from the front hairline to the nape, from ear to ear across the top, from temple to temple around the back, and across the crown.

For a custom unit, make a template by covering the bald area with plastic wrap and clear tape and outlining it with a marker. The template gives the exact size and hairline.

Attaching

Clean and dry the scalp so adhesives hold.

Use double-sided tape , liquid adhesive , or clips . Clips need enough existing hair to hold them.

Position the front hairline, press the unit down from front to back, then cut and blend the hairpiece hair into the client's own hair with shears, a razor, or thinning shears.

Maintaining and removing

Remove the unit by dissolving the adhesive with the manufacturer's solvent or adhesive remover . Never pull the unit off, which can tear the base or skin.

Clean the old adhesive off the base and the scalp. Check the scalp for irritation.

Shampoo gently with the hair moving in one direction, with no rubbing. Use cool water and special shampoo for synthetic hair.

Condition, blot, and air-dry on a block or form . Do not apply heat to synthetic fiber.

Do not use chemical services on the attached unit unless the hair and base are rated for them. Patch-test adhesives on clients with sensitive skin.

Quick comparison

  • Service Main risk Key safety step
  • Sew-in Traction on the braided track Moderate braid tension; no sewing through the braid base into skin
  • Bonding Adhesive allergy or breakage when removed Patch-test the adhesive; use the proper remover
  • Locks Buildup, mildew, thinning at the base Residue-free cleansing; dry fully; avoid overtightening
  • Braids Traction alopecia Watch the hairline; loosen tight styles
  • Hairpiece Skin irritation; torn base Clean skin; proper solvent; no pulling