Study guide
3.7 Safe Working Conditions: Water Temperature, Equipment Maintenance, and Electrical Safety
Tennessee Barber License Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Tennessee Master Barber Exam and Licensure Requirements
1.1 The 2026 Tennessee Master Barber Exams: PSI Theory Blueprint, Practical Test, and Fees 1.2 General Licensure Requirements: Scope of Barbering, License Types, Hours, and Qualifications 1.3 Renewal, Late Renewal, Reinstatement, Retirement, Inactive Status, and Reciprocity 1.4 The Board, Communicating With It, and Disciplinary Actions 1.5 Displaying the License, Mobile Shops, and Residential Barber Services 1.6 Barber Shop Requirements: Registration, Equipment, Location Changes, Contact Information, and Ownership
2 Rights and Responsibilities and Tennessee Sanitary Rules
2.1 Rights and Responsibilities: Owner and Manager Duties, Required Postings, and Client-Rights Signs 2.2 Tennessee Sanitary Rules I: Inspections, Facilities, Equipment, Attire, Laundry, Animals, Trash, and Communicable Diseases 2.3 Tennessee Sanitary Rules II: Disinfection Standards, Towels, Combs, Products, Prohibited Substances, and Alcoholic Beverages
3 Safety and Infection Control
3.1 Microbiology: Pathogens, Transmission, and Public Health 3.2 The Three Levels of Infection Control 3.3 Tool Disinfection and Implement Sanitation Protocols 3.4 Blood Exposure Procedures, First Aid, and OSHA's Bloodborne Pathogens Standard 3.5 Chemical Safety: Labeling and Storage, Safety Data Sheets, Federal Agencies, Adverse Reactions, and Ventilation 3.6 Client Protection: Draping, Chemical Barriers, and Headrest Covers 3.7 Safe Working Conditions: Water Temperature, Equipment Maintenance, and Electrical Safety
4 Client Consultation and Hair and Skin Analysis
4.1 Client Consultation: Intake and Release Forms, Contraindications, and Medical Referral 4.2 Skin Structure, Functions, Glands, and Dermatological Disorders 4.3 Hair Anatomy, Chemical Composition, and Growth Phases 4.4 Trichology: Hair Properties, Scalp Disorders, and Alopecia
5 Hairstyling
5.1 Textured Hairstyling, Extensions, Locks, Braids, and Hairpieces 5.2 Blowdrying, Thermal Curling, and Thermal Tool Safety
6 Haircutting and Haircutting Tool Safety
6.1 Principles of Haircutting: Reference Points, Angles, and Elevation 6.2 Scissor and Shear Cutting Techniques 6.3 Clipper Cutting, Tapering, and Fading 6.4 Outlining, Neckline Finishing, and Hair Texturizing 6.5 Haircutting Tool Safety I: Shears, Thinning Shears, and Their Maintenance 6.6 Haircutting Tool Safety II: Clippers, Trimmers, Blades, and Guards
7 Haircoloring
7.1 Color Theory, Color Wheel, and Natural Hair Pigments 7.2 Classifications of Haircolor: Temporary to Permanent 7.3 Lightening, Developers, Toners, and Fillers 7.4 Haircolor Safety: Patch Tests, Strand Tests, Chemical Precautions, and Coloring Facial Hair
8 Chemical Texture Services
8.1 Chemistry of Texture: Hair Bonds and the pH Scale 8.2 Permanent Waving: Chemistry, Rods, Wrapping, and Neutralization 8.3 Chemical Hair Relaxers and Reformation
9 Skin Care, Facial Massage, and Scalp Treatments
9.1 Anatomy of the Head, Face, and Neck for Massage and Shaving 9.2 Facial and Scalp Massage, Scalp Treatments, and Electrotherapy 9.3 Facials, Exfoliation, Skin Care Products and Machines, and Hot Towels
10 Shaving
10.1 Shaving Fundamentals: The Four Razor Strokes and the 14 Shaving Areas 10.2 Shave Preparation, Hot Towels, and Lather Application 10.3 The Standard Shave Service: First-Time-Over and Close Shaving 10.4 Shaving Safety: Contraindications, Facial Hair Types, Razor Handling, and Shaving Around the Mouth and Ears 10.5 Mustache, Beard, and Goatee Design and Maintenance 10.6 Straight Razors, Changeable-Blade Razors, Honing, Stropping, and Blade Disposal
3.7 Safe Working Conditions: Water Temperature, Equipment Maintenance, and Electrical Safety
Key Takeaways Explain This Topic AI
Test shampoo water and steam towels on the inside of your wrist before they touch the client, and keep checking water temperature during the shampoo.
Consumer safety agencies recommend setting water heaters no higher than 120 degrees Fahrenheit, because 140-degree water can cause a serious scald in seconds.
Use only electrical equipment with a safety certification mark such as UL, inspect cords and plugs before use, and never use appliances with wet hands or near standing water.
A ground fault circuit interrupter (GFCI) cuts power in a fraction of a second when current leaks to ground, which is why outlets near shampoo bowls and sinks need GFCI protection.
Clean up hair and spills right away, keep cords out of walkways, and remove damaged tools from service until they are repaired.
Last updated: September 2026
Why this topic matters
Four Domain I subtopics are about physical safety: procedures for maintaining safe working conditions , safe water temperature , safe use of equipment and maintenance procedures , and electrical safety . On the practical test, every one of the eight topic areas is scored for "workplace safety precautions." PSI's list of expectations includes cleaning up spills, picking up dropped items, preventing slips and trips, and making sure tools are in safe working order with "no frayed or exposed wires, rusty metals, etc."
- Safe working conditions
- Floors and walkways
Sweep hair after each client. Tennessee Rule 0200-03-.03 requires hair to be removed promptly after each customer and floors to be swept or mopped daily. Hair on tile is slippery.
Wipe spills immediately , especially water, conditioner, oils, and lather near the shampoo bowl and shave chair.
Keep cords, cases, and supply kits out of walkways . Store your kit under the table, as PSI requires on the practical test.
Keep exits and aisles clear , and know where the fire extinguisher and first aid kit are. Tennessee barber schools must have a first aid kit, and so must mobile shops and residential kits.
Client positioning
Lock the hydraulic chair before seating the client. Lower and recline it smoothly, and tell the client before you move it.
Support the head during reclined services such as shaves and shampoos. Do not hyperextend the client's neck over the shampoo bowl; use a towel or cushion at the neck edge.
Help clients with limited mobility in and out of the chair.
Your own body
Adjust chair height so your wrists stay straight and your shoulders stay relaxed. Stand with weight balanced on both feet, and wear supportive shoes.
Take short breaks to reduce repetitive strain from shears and clippers.
Safe water temperature
Hot water is part of shampooing, steam towels, scalp treatments, and rinsing chemicals. The client cannot see the water and may not warn you in time.
Test water on the inside of your wrist before it touches the client. The inner wrist is thinner and more sensitive than your palm.
Keep one finger in the stream while rinsing so you notice a sudden change, such as when someone else in the shop turns on a tap.
Ask the client whether the temperature is comfortable, especially after a chemical service, when the scalp may be sensitive.
Rinse chemicals with cool to lukewarm water. Hot water opens the cuticle further and irritates a scalp that has just been treated. Relaxer and color manufacturers typically call for warm or tepid rinsing.
Steam towels from a towel warmer can be much hotter than tap water. Test each towel on your inner wrist, and shake it out slightly before placing it on the face. Never use a towel that has been used before and re-dipped in hot water (Tennessee Rule 0200-03-.05(7)(c)).
Why the heater setting matters. Consumer safety agencies recommend setting water heaters at no more than 120°F . At about 140°F, a serious scald can occur in seconds. Clients with thin, aged, or chemically treated skin are the most at risk.
Safe use and maintenance of equipment
Equipment Safe-use and maintenance rules
Clippers and trimmers Oil and clean the blades; check blade alignment; replace worn drive parts; never zero-gap a trimmer so the cutting blade extends past the stationary blade; turn off before brushing out hair
Shears and razors Keep them sharp and aligned; close shears and fold razors when not in use; never hand them to someone blade-first; put used blades in a sharps container
Thermal tools Test the temperature on a tissue or hair strand before using on the client; set tools on heat-resistant stands; unplug when finished
Hydraulic chairs Check the base, pump, and lock; clean and disinfect the headrest and arms after each service
Towel warmers and steamers Follow the manufacturer's cleaning schedule; use only clean towels; keep the door closed
Ultraviolet sanitizers Use only for storing clean, disinfected tools, never in place of immersion
A tool that is cracked, rusty, dull, or damaged comes out of service until it is repaired or replaced. Tennessee Rule 0200-03-.05(11) requires equipment, shampoo basins, furnishings, and work surfaces to be kept in good repair and disinfected after each service. Rule 0200-01-.07(6) requires all equipment to be in working order.
Electricity basics barbers need
- Term Meaning
- Electric current The flow of electricity along a conductor
- Conductor Material that lets electricity flow easily, such as copper, water, or the human body
- Insulator (nonconductor) Material that resists electricity, such as rubber, plastic, or dry wood
- Direct current (DC) Current that flows in one direction; batteries supply it, as in cordless clippers
- Alternating current (AC) Current that reverses direction rapidly; wall outlets supply it
- Volt The unit of electrical pressure that pushes current
- Amp The unit of electric current, or how much flows
- Ohm The unit of resistance
- Watt The unit of power, or how much energy a device uses per second
- Fuse and circuit breaker Devices that stop current when a circuit overloads, preventing overheating and fire
- Grounding A path that sends stray current safely to the ground, through the third (round) prong of a plug
GFCI (ground fault circuit interrupter) Senses current leaking to ground, as through a person or water, and cuts power almost instantly
Electrical safety rules
Use certified equipment. Look for a safety listing mark such as UL (Underwriters Laboratories), which shows the appliance was tested for safety.
Inspect cords and plugs before use. Frayed, cracked, or taped cords and bent or missing prongs mean the tool comes out of service.
Keep electricity and water apart. Keep clippers, dryers, and irons away from sinks, shampoo bowls, and wet surfaces. Never use them with wet hands or while standing on a wet floor.
Use GFCI-protected outlets near sinks and shampoo bowls.
Do not overload outlets with multiple high-wattage tools such as dryers, irons, and towel warmers on one circuit, and avoid chains of extension cords.
Unplug by the plug , not the cord, and unplug before cleaning or changing blades.
Do not use grounded plugs in ungrounded outlets , and never remove the grounding prong.
If someone is shocked, do not touch the person while they may still be in contact with the current. Turn off the power at the breaker or unplug the device, then call 911 and give first aid.
Never leave hot tools unattended or plugged in overnight.
Putting it into practice
Before your first client each day, run through this check: floors dry and clear; cords intact and away from the shampoo bowl; clippers oiled, blades aligned, and guards clean; towel warmer working and filled with clean towels; water tested at the shampoo bowl; and the first aid kit stocked. That routine covers most of what PSI evaluates in "workstation preparation" on the practical test.