Study guide

10.3 The Standard Shave Service: First-Time-Over and Close Shaving

Tennessee Barber License Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Tennessee Master Barber Exam and Licensure Requirements

1.1 The 2026 Tennessee Master Barber Exams: PSI Theory Blueprint, Practical Test, and Fees 1.2 General Licensure Requirements: Scope of Barbering, License Types, Hours, and Qualifications 1.3 Renewal, Late Renewal, Reinstatement, Retirement, Inactive Status, and Reciprocity 1.4 The Board, Communicating With It, and Disciplinary Actions 1.5 Displaying the License, Mobile Shops, and Residential Barber Services 1.6 Barber Shop Requirements: Registration, Equipment, Location Changes, Contact Information, and Ownership

2 Rights and Responsibilities and Tennessee Sanitary Rules

2.1 Rights and Responsibilities: Owner and Manager Duties, Required Postings, and Client-Rights Signs 2.2 Tennessee Sanitary Rules I: Inspections, Facilities, Equipment, Attire, Laundry, Animals, Trash, and Communicable Diseases 2.3 Tennessee Sanitary Rules II: Disinfection Standards, Towels, Combs, Products, Prohibited Substances, and Alcoholic Beverages

3 Safety and Infection Control

3.1 Microbiology: Pathogens, Transmission, and Public Health 3.2 The Three Levels of Infection Control 3.3 Tool Disinfection and Implement Sanitation Protocols 3.4 Blood Exposure Procedures, First Aid, and OSHA's Bloodborne Pathogens Standard 3.5 Chemical Safety: Labeling and Storage, Safety Data Sheets, Federal Agencies, Adverse Reactions, and Ventilation 3.6 Client Protection: Draping, Chemical Barriers, and Headrest Covers 3.7 Safe Working Conditions: Water Temperature, Equipment Maintenance, and Electrical Safety

4 Client Consultation and Hair and Skin Analysis

4.1 Client Consultation: Intake and Release Forms, Contraindications, and Medical Referral 4.2 Skin Structure, Functions, Glands, and Dermatological Disorders 4.3 Hair Anatomy, Chemical Composition, and Growth Phases 4.4 Trichology: Hair Properties, Scalp Disorders, and Alopecia

5 Hairstyling

5.1 Textured Hairstyling, Extensions, Locks, Braids, and Hairpieces 5.2 Blowdrying, Thermal Curling, and Thermal Tool Safety

6 Haircutting and Haircutting Tool Safety

6.1 Principles of Haircutting: Reference Points, Angles, and Elevation 6.2 Scissor and Shear Cutting Techniques 6.3 Clipper Cutting, Tapering, and Fading 6.4 Outlining, Neckline Finishing, and Hair Texturizing 6.5 Haircutting Tool Safety I: Shears, Thinning Shears, and Their Maintenance 6.6 Haircutting Tool Safety II: Clippers, Trimmers, Blades, and Guards

7 Haircoloring

7.1 Color Theory, Color Wheel, and Natural Hair Pigments 7.2 Classifications of Haircolor: Temporary to Permanent 7.3 Lightening, Developers, Toners, and Fillers 7.4 Haircolor Safety: Patch Tests, Strand Tests, Chemical Precautions, and Coloring Facial Hair

8 Chemical Texture Services

8.1 Chemistry of Texture: Hair Bonds and the pH Scale 8.2 Permanent Waving: Chemistry, Rods, Wrapping, and Neutralization 8.3 Chemical Hair Relaxers and Reformation

9 Skin Care, Facial Massage, and Scalp Treatments

9.1 Anatomy of the Head, Face, and Neck for Massage and Shaving 9.2 Facial and Scalp Massage, Scalp Treatments, and Electrotherapy 9.3 Facials, Exfoliation, Skin Care Products and Machines, and Hot Towels

10 Shaving

10.1 Shaving Fundamentals: The Four Razor Strokes and the 14 Shaving Areas 10.2 Shave Preparation, Hot Towels, and Lather Application 10.3 The Standard Shave Service: First-Time-Over and Close Shaving 10.4 Shaving Safety: Contraindications, Facial Hair Types, Razor Handling, and Shaving Around the Mouth and Ears 10.5 Mustache, Beard, and Goatee Design and Maintenance 10.6 Straight Razors, Changeable-Blade Razors, Honing, Stropping, and Blade Disposal

10.3 The Standard Shave Service: First-Time-Over and Close Shaving

Key Takeaways Explain This Topic AI

Precision straight razor shaving relies on a secure grip—thumb and first two fingers on the shank with the pinky on the tang—paired with the non-dominant hand stretching the skin taut and dry strictly behind the advancing blade.

The first-time-over shaves all 14 areas with the grain; the second-time-over uses water instead of lather and a light freehand stroke with or across the grain to remove rough spots; the once-over is a single-lather shave with strokes across the grain.

Finish with a light cream or moisturizer and a moderately warm towel, then toner, and apply powder with a clean applicator that is discarded right away (Tennessee Rule 0200-03-.05(9)); treat nicks with antiseptic or liquid or spray styptic (Rule 0200-03-.05(4)).

Last updated: September 2026

10.3 The Standard Shave Service: First-Time-Over and Close Shaving

Executing a professional straight razor shave requires absolute synchronization between both hands. While the dominant hand directs the razor with micrometer-level precision, the non-dominant hand continuously creates a flat, taut epidermal foundation. Shaving is not merely scraping away hair; it is a methodical surgical craft that balances cutting efficiency against skin integrity. Executing the service correctly guarantees a close, irritation-free finish while upholding every public health standard set forth by the Tennessee Board.

Straight Razor Grip Mechanics and Hand Dynamics

The proper grip provides stability, prevents hand cramping, and allows fluid transitions between the four standard shaving strokes. STRAIGHT RAZOR ANATOMY & GRIP

  • [ BLADE ]
  • ┌──────────────────┴──────────────────┐
  • │ │
  • [ POINT ] ────── [ CUTTING EDGE ] ────── [ HEEL ]
  • │
  • [ SHANK ] ─── (Thumb beneath;
  • │ First 2 fingers on top)
  • [ PIVOT ]
  • │
  • [ SCALES / HANDLE ] ─── [ TANG ] ─── (Pinky rests on tang
  • (Extended clear of hand) for lever control)
  • The Standard Grip

Thumb Placement: The ball of the thumb rests comfortably on the underside of the shank , positioned directly adjacent to the pivot joint.

Index and Middle Fingers: The cushions of the index and middle fingers rest flat across the top of the shank , providing primary downward stabilizing control.

Ring Finger: The ring finger rests on the shank at or just past the pivot screw, assisting in directional balance.

Little Finger (Pinky): The pinky rests securely on the curved tang (tail). The tang acts as a mechanical lever; applying light pinky pressure controls the pitch and tilt of the blade.

Scales (Handle): The handle of the razor is held extended outward, completely clear of the hand, never gripped or bunched into the palm.

The Role of the Non-Dominant Hand: Skin Stretching Mechanics

The non-dominant hand is equally as important as the hand holding the razor. Loose, relaxed skin gathers in front of an advancing razor edge like a wave, causing the blade to dig in and produce severe lacerations.

Key Principles of Skin Tension

Always Position Behind the Blade: The non-dominant thumb and fingertips must always be positioned behind or to the side of the razor stroke , pulling the skin taut in the direction opposite to the stroke. Never place fingers in front of the advancing cutting edge.

Maintain Dry Fingertips: Wet, lather-soaked fingers slide uselessly on the client's skin. The barber must keep a dry folded towel handy to keep the non-dominant fingertips dry to ensure an unshakeable, non-slip grip.

Moderate, Consistent Tension: Pull the skin just firmly enough to create a flat, drum-tight surface. Over-stretching distorts the hair follicle, pulling the hair root partially out of the skin before it is severed; when the skin relaxes, the cut hair retracts beneath the surface, predisposing the client to ingrown hairs.

Short Stroke Length: Razor strokes should be short, controlled, and rhythmic—measuring 1 to 3 inches in length. Long, sweeping strokes increase the risk of losing blade angle and catching loose skin folds.

First-Time-Over, Second-Time-Over, and Once-Over Shaves

  • Pass What it is How it is done
  • First-time-over The main shave All 14 areas in order, with the grain , on a well-lathered beard

Second-time-over A follow-up pass to remove rough or missed spots Water instead of lather ; usually a freehand stroke with a very light touch ; the skin is stretched tightly and the razor goes with or across the grain

Once-over shave A single-lather shave Strokes are made across the grain so the shave is finished in one pass, without a second-time-over

The First-Time-Over Shave

The barber works through the 14 areas in numerical order (section 10.1), shaving with the grain . Wipe accumulated lather and hair from the blade every few strokes onto a clean towel or tissue held nearby, never onto the client's cape. Re-lather any area that starts to dry.

The Second-Time-Over Shave

Milady describes the second-time-over as the step that follows the regular shave to remove rough or uneven spots. Water replaces lather, the freehand stroke is usually used with a very light touch, and the skin is stretched tightly. Because the razor may go across the grain, it can amount to a form of close shaving, so take care not to irritate or injure the skin.

Close Shaving

Close shaving means shaving the beard against the grain during the second-time-over. Barbering texts advise avoiding it. It cuts the hair below the skin line, and as the hair grows back its sharp tip can curve into the skin, causing:

  • Pseudofolliculitis barbae (ingrown hairs) and razor bumps
  • Folliculitis , from bacteria entering damaged follicles
  • Razor burn and redness
  • Keloid scarring in susceptible clients

Explain these risks during the consultation. Avoid close shaving on curly or coarse beards, sensitive skin, or any client with a history of ingrown hairs.

Finishing the Shave

Cream and massage: Apply a light facial cream or moisturizing lotion with effleurage, and massage it in with petrissage movements.

Warm towel: Apply a moderately warm towel over the face. Avoid a very hot towel, because the skin is sensitive right after shaving.

Toner: Apply a mild toner or astringent with clean cotton to refresh the skin. Many barbers finish with a cool towel to soothe the skin.

Powder: If you use powder, apply it with a clean applicator that is disposed of immediately after use , as Tennessee Rule 0200-03-.05(9) requires for powders and lotions. A shared neck duster is not a clean single-use applicator.

Return the chair upright slowly, remove the draping, and clean up. Discard the blade in the sharps container, and clean and immerse the razor handle and other tools (section 10.6).

Handling a Nick

Even careful barbers occasionally nick a client.

Stop the stroke, reassure the client, and put on gloves .

Apply light pressure with clean cotton or gauze.

Apply antiseptic and/or liquid or spray styptic with a single-use applicator . Tennessee Rule 0200-03-.05(4) requires shops to keep these on hand. Do not touch a solid styptic pencil or lump alum to the cut, because it cannot be disinfected.

Cover the nick if needed, and dispose of contaminated cotton and gloves properly.

Clean and immerse any tool that touched blood in an EPA-registered, hospital-grade disinfectant effective against HIV-1 and hepatitis B (Rule 0200-03-.05(3)).

Wash your hands with soap and water, then use hand sanitizer or antiseptic (Rule 0200-03-.05(10)).

Section 3.4 gives the complete blood exposure procedure.

Shaving Products at a Glance

PSI's outline names "shaving products and application (e.g., lather, bracer)." Know what each product does and when to use it.

Product Purpose Application notes

Lather (shaving cream or soap from a latherizer) Cleanses the skin, softens the beard, holds hairs upright, and lets the razor glide Rub in with rotary fingertip movements for 1 to 2 minutes; re-lather areas that dry

Pre-shave oil or gel Adds slip on coarse or sensitive beards Thin layer under the lather

Toner or astringent Refreshes the skin and removes residue after the shave Clean cotton; alcohol-free for sensitive or freshly close-shaved skin

Bracer (aftershave lotion) A tonic lotion applied after the shave to refresh and slightly tighten the skin; many contain alcohol and fragrance Patted on lightly; alcohol-based bracers sting nicks and dry the skin, so choose a mild one for sensitive clients

Moisturizer or facial cream Soothes and hydrates after the shave Applied with effleurage and massaged in with petrissage

Antiseptic and liquid or spray styptic First aid for nicks Required on hand by Tennessee Rule 0200-03-.05(4); single-use applicator

Powder Absorbs moisture and reduces shine Clean applicator, disposed of immediately (Rule 0200-03-.05(9))