Study guide

13.2 Rods, Wrapping & Processing

Tennessee Cosmetology Licensing Exam Study Guide 2026

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Exam Overview & the Tennessee Licensing Path

1.1 Exam Format & Current Facts 1.2 Eligibility & Training Requirements 1.3 Registration, Fees & Test Day

2 Chapter 2: Tennessee Cosmetology Law & Board Rules

2.1 The Board, the Statute & the Rules 2.2 License Types & Scope of Practice 2.3 Renewal, Reciprocity, the Compact & Discipline

3 Chapter 3: Microbiology & the Spread of Infection

3.1 Bacteria, Viruses, Fungi & Parasites 3.2 Infection, Transmission & Immunity 3.3 Bloodborne Pathogens & OSHA

4 Chapter 4: Decontamination, Disinfection & Salon Safety

4.1 Cleaning, Disinfecting & Sterilizing 4.2 Disinfectant Types, EPA Registration & Procedures 4.3 Safety Data Sheets, Chemical Storage & First Aid

5 Chapter 5: Anatomy & Physiology for Cosmetologists

5.1 Cells, Tissues & Body Systems 5.2 Bones of the Head, Face & Neck 5.3 Muscles & Nerves of the Head, Face & Neck

6 Chapter 6: Chemistry, Electricity & Light Therapy

6.1 Matter, pH & Product Chemistry 6.2 Cosmetic Ingredients & Water Chemistry 6.3 Electricity, Light & Salon Machines

7 Chapter 7: Trichology — Hair Structure, Growth & Disorders

7.1 Hair Structure & Chemical Bonds 7.2 Hair Growth Cycles, Loss & Hair Analysis 7.3 Scalp & Hair Disorders

8 Chapter 8: Skin Histology, Disorders & Analysis

8.1 Skin Structure & Functions 8.2 Skin Disorders & Diseases 8.3 Skin Analysis & Skin Types

9 Chapter 9: Nail Structure, Growth & Disorders

9.1 Nail Anatomy & Growth 9.2 Nail Disorders & Diseases 9.3 Client Safety, Contraindications & Referral

10 Chapter 10: Shampooing, Conditioning & Scalp Care

10.1 Shampoo Chemistry & Product Selection 10.2 Conditioners & Treatments 10.3 Shampoo Procedure & Scalp Massage

11 Chapter 11: Haircutting Fundamentals & Techniques

11.1 Cutting Tools, Care & Safety 11.2 Sectioning, Lines, Angles & Guidelines 11.3 Cutting Techniques & Texturizing

12 Chapter 12: Hairstyling, Braiding & Hair Additions

12.1 Wet Styling, Finger Waving & Rollers 12.2 Blow Drying & Thermal Styling 12.3 Braiding, Wigs & Hair Additions

13 Chapter 13: Chemical Texture Services — Perms & Relaxers

13.1 Permanent Wave Chemistry & Hair Analysis 13.2 Rods, Wrapping & Processing 13.3 Chemical Relaxers & Curl Re-Forming

14 Chapter 14: Haircoloring Theory, Products & Application

14.1 Color Theory & the Level System 14.2 Color Products, Developers & Lighteners 14.3 Application, Corrective Color & Safety

15 Chapter 15: Skin Care Services — Facials, Hair Removal & Makeup

15.1 Facial Procedures & Massage 15.2 Hair Removal Methods 15.3 Makeup Application & Color Selection

16 Chapter 16: Nail Care Services — Manicure, Pedicure & Artificial Nails

16.1 Manicure Tools & Procedure 16.2 Pedicure & Foot Care 16.3 Artificial Nail Services

17 Chapter 17: Salon Business, Professionalism & Exam-Day Strategy

17.1 Salon Business, Ownership & Employment Rules 17.2 Professional Ethics & Client Communication 17.3 The Tennessee Practical Exam & Career Launch

13.2 Rods, Wrapping & Processing

Key Takeaways Explain This Topic AI

Concave rods produce a tighter curl in the center of the strand; straight rods produce a uniform curl; rod diameter directly controls curl size.

End papers (bookend, double, and cushion methods) keep hair ends smooth and prevent fishhooks.

Base placement — on-base, half-off, and off-base — controls the volume and the stress on each curl.

The cotton coil protects the skin from solution and must be replaced whenever it becomes saturated.

Fishhooks come from ends that are bent or folded during wrapping; band marks and breakage come from rubber bands fastened too tightly.

Last updated: August 2026

Rods, End Papers, and the Language of Wrapping

The physical phase of the perm decides what the finished curl looks like, and the exam treats wrapping vocabulary as test-worthy terminology.

Rods. A concave rod has a smaller diameter in the center than at the ends, so it creates a curl that is tighter in the middle of the strand and looser at the scalp and ends. A straight rod has the same diameter along its length and produces a uniform curl. Soft bender rods are flexible foam tools for specialty sets. Whatever the shape, the rule never changes: the diameter of the rod determines the size of the curl — small rods, tight curl; large rods, loose wave.

End papers (end wraps) are small absorbent papers placed around the ends of the strand so they wrap smoothly instead of crimping. The three methods to know:

Bookend wrap — one paper folded in half over the ends like a book cover.

Double flat wrap — one paper under and one over the ends.

Cushion wrap — multiple papers creating a soft pad, useful for very short or fragile ends.

Skipped or sloppy end papers are the direct cause of fishhooks — ends that bend back on themselves and frizz instead of curling.

Sectioning terms. The hair is divided into sections , each section is divided into panels (also called base sections) sized to the rod, and a panel may be split into subsections for wrapping. The panel is normally about as wide and as long as the rod being used.

Base placement describes the angle at which the strand is held relative to its base, and it controls volume and scalp stress:

On-base placement — hair held roughly 45 degrees beyond 90 degrees from its base; maximum volume, but the most stress on the hair.

Half-off-base placement — hair held at 90 degrees; medium volume and the least stress, commonly recommended for fragile hair.

Off-base placement — hair held at 45 degrees; minimum volume, curl sits away from the scalp.

Base direction is the angle the rod is positioned on the head — horizontal, vertical, or diagonal — and it steers how the finished style falls.

Wrapping Patterns

  • Pattern How it works Typical use
  • Basic (9-section) wrap Head divided into nine panels; rods set straight back All-over uniform curl
  • Bricklay wrap Panels staggered like bricks so part lines disappear Avoiding visible splits between curls
  • Spiral wrap Hair wound down the rod at an angle from scalp to ends Long hair, vertical corkscrew curl

Double-rod (piggyback) wrap Strand wrapped on two rods, one piggybacked on the other Extra-long hair that exceeds one rod

Weave / zigzag wrap Alternating zigzag sections wrapped in opposite areas Blending and movement in specific zones

  • Curvature wrap Panels follow the curve of the head Short hair, directed styles
  • The Service, Step by Step

The PSI exam loves procedural order. A safe perm service runs like this:

Consult and analyze the hair; perform a strand test if the history is questionable.

Shampoo gently and towel blot — do not irritate or abrade the scalp, and never perm right after vigorous scalp brushing.

Section and wrap the hair with the chosen pattern, end papers, and base placement. Keep tension even and fasten rubber bands without crushing the hair.

Apply protective barrier cream around the hairline and ears, then place a cotton coil around the hairline to catch drips.

Apply waving lotion to the top and underside of each wound rod, saturating the hair. Replace the cotton coil whenever it becomes saturated — saturated cotton held against the skin causes chemical irritation.

Cover with a plastic cap if required and process according to the manufacturer's directions and the strand test, checking a test curl periodically: unwind the rod one and a half turns and look for a firm S-formation .

When processing is complete, rinse thoroughly with warm water for at least five minutes (per manufacturer timing), keeping the rods in place, then blot each rod to remove excess water — leftover solution dilutes the neutralizer.

Apply the neutralizer to each rod, process per manufacturer directions, then apply the second neutralizer application if the product calls for it, and gently remove the rods.

Rinse again, condition as directed, and style without stretching the new curl.

Common Perm Problems

  • Problem Likely cause
  • Weak, limp curl Underprocessing, rods too large, or lotion not saturating the hair
  • Frizzy, damaged, or gummy hair Overprocessing or lotion too strong for the hair's condition
  • Fishhooks on the ends Ends folded or crimped because end papers were skipped or misplaced
  • Breakage at the base or band marks Rubber bands fastened too tightly or wrapped with excessive tension
  • Straight hair at the scalp Neutralizer not reaching the base, or poor blotting before neutralizing
  • Scalp irritation or chemical burn Saturated cotton coil left in place, or scalp abraded before the service

One scenario pattern shows up repeatedly: a client leaves with broken hair right where the rod fasteners sat. The answer is never the lotion — it is mechanical damage from bands that were too tight. Likewise, frizz on the ends with a good curl through the strand points to wrapping technique, not chemistry.