Study guide

4.3 Electrical Safety, Safe Water Temperature & Equipment Maintenance

Tennessee Esthetician Aesthetician

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Tennessee Licensing, the Board & the Examination Path

1.1 Tennessee Cosmetology & Barber Board Overview, Licensing & Hours 1.2 PSI Theory Examination: Format, Content Outline & Scoring 1.3 The PSI National Esthetician Practical Examination 1.4 The Tennessee Law Examination, Reciprocity, Reinstatement & Retired Licenses 1.5 Renewal, Continuing Education, Lapse & Maintaining Your Tennessee License 1.6 Board Discipline, Civil Penalties & Unlicensed Practice 1.7 Shop Licensing, Manager Duties & Display Requirements

2 Chapter 2: Tennessee Sanitary Rules & Scope of Practice (Chapter 0440-02)

2.1 Posting, Inspections & Tennessee's Wet and Dry Disinfection Standards 2.2 Required Skin Care Shop Equipment & Facility Rules 2.3 The Communicable Disease Rule, Towels & Safe Product Handling 2.4 Tennessee Scope of Practice, Prohibited Procedures & Medical Boundaries

3 Chapter 3: Infection Control — Microbiology & Decontamination

3.1 Microbiology: Bacteria, Viruses, Fungi & Parasites in Skin Care 3.2 Decontamination Levels: Cleaning, Disinfection & Sterilization 3.3 Single-Use vs Multi-Use Items, Storage & Labeling 3.4 Hand Hygiene, Draping & Client Protection 3.5 Regulatory Agencies: The Board, OSHA, EPA, FDA & CDC

4 Chapter 4: Workplace Safety, Chemicals & Emergency Response

4.1 OSHA Guidelines, Safety Data Sheets (SDS) & Treatment Room Safety 4.2 Chemical Labeling, Storage, Ventilation & Disposal 4.3 Electrical Safety, Safe Water Temperature & Equipment Maintenance 4.4 First Aid Protocols & Blood Spill Procedures

5 Chapter 5: Client Consultation, Contraindications & Referral

5.1 Client Intake, Consent Forms & Declining or Altering a Service 5.2 Patch Testing, Allergic Reactions & Signs of Adverse Product Reactions 5.3 Recommending a Medical Opinion: Red Flags & Referral

6 Chapter 6: Skin Sciences — Structure, Analysis & Disorders

6.1 Epidermis, Dermis & Subcutaneous Layers and Functions 6.2 Sebaceous Glands, Sudoriferous Glands & Skin Appendages 6.3 Skin Types, Conditions & Fitzpatrick Scale Skin Analysis 6.4 Skin Disorders, Diseases, Lesions & Contraindications 6.5 Intrinsic and Extrinsic Aging, Photodamage & Pigmentation Disorders

7 Chapter 7: Chemistry, Product Science & Cosmetic Ingredients

7.1 Cosmetic Chemistry, pH Scale, Emulsions & Surfactants 7.2 Active Ingredients: AHAs, BHAs, Enzymes & Retinoids 7.3 Sunscreen Formulations, Antioxidants & Hydrating Agents 7.4 Product Selection, Delivery Systems & Safety Standards

8 Chapter 8: Facial Treatments, Exfoliation & Devices

8.1 Basic & Advanced Facial Protocols, Cleansing & Steaming 8.2 Masks, Hot Towels & Safe Extraction 8.3 Exfoliation Techniques: Mechanical & Superficial Chemical Peels 8.4 Facial Massage Movements, Lymphatic Drainage & Contraindications 8.5 Electrotherapy Modalities: High Frequency, Galvanic & LED Light 8.6 Facial Machine & Device Safety and Tennessee's Legal Limits

9 Chapter 9: Hair Removal & Epilation Services

9.1 Hair Anatomy, Growth Cycles & Types of Hair 9.2 Soft Wax & Hard Wax Application & Removal Techniques 9.3 Tweezing, Sugaring, Threading & Epilation Contraindications 9.4 Hair Removal Contraindications, Medications & Client Screening 9.5 Waxing Infection Control, Temperature Testing & Burn Response

10 Chapter 10: Makeup, Eyelash & Eyebrow Services

10.1 Color Theory, Facial Morphology & Makeup Application 10.2 Hygienic Makeup Application, Palettes & Disposables 10.3 Eyelash & Eyebrow Tinting, Perming, Lamination & Extensions 10.4 Lash Adhesive, Remover Safety & Eye-Area Precautions

11 Chapter 11: Spa Business, Records & Career

11.1 Advanced Spa Body Treatments: Wraps, Scrubs & Hydrotherapy 11.2 Spa Business Models, Employment Classification & Professional Ethics 11.3 Client Records, Confidentiality, Retention & Liability 11.4 Exam-Day Strategy & Career Paths in Tennessee

4.3 Electrical Safety, Safe Water Temperature & Equipment Maintenance

Key Takeaways Explain This Topic AI

The blueprint lists electrical safety, safe water temperature and safe use and maintenance of equipment as separate workplace safety sub-topics.

Rule 0440-02-.07(5)(a) requires all equipment in a Tennessee shop to be in working order, and Rule 0440-02-.13(10) requires it to be kept in good repair and disinfected after each service.

Hot towels must be wrung out and temperature-tested before touching a client; PSI scores that test in the practical facial.

Never touch a client, a metal surface or water while operating an electrical device, and never leave a client unattended while connected to equipment.

Frayed cords, exposed wires, rusted metal and overloaded outlets are examinable equipment-safety findings on both the practical and theory examinations.

Last updated: August 2026

Heat, Water and Electricity, All at Once

A facial room concentrates three hazards that safety engineering normally keeps apart. A facial steamer boils water beside a live electrical element. A hot towel cabin heats damp cloth. A wax pot holds molten wax at working temperature all day. Electrotherapy devices pass current through a client's body. Tennessee's rules and the PSI blueprint both treat this as a distinct safety domain.

Electrical Safety Principles

Water and electricity. Never operate an electrical device with wet hands, and never place a device where it can be splashed. Keep the steamer's water reservoir filled and capped before the unit is switched on, and unplug before refilling.

Inspect the cord before every use. PSI's practical guidance names this explicitly: making certain tools and equipment are in safe working order, with no frayed or exposed wires, rusty metals , and that tools and equipment are used safely. A frayed cord is not a maintenance backlog item; it takes the device out of service today.

One appliance, one outlet. Do not run a steamer, a hot towel cabin and a wax pot from one power strip. Overloaded circuits are the most common cause of salon electrical fires.

Never touch the client and a metal surface simultaneously while a device is energised, and remove the client's metal jewellery before electrotherapy.

Never leave a client unattended while connected to or beneath any device. This is the rule behind most litigation in this area: the esthetician steps out to answer a phone and a steamer drifts, a lamp overheats, or a client repositions into the steam.

Unplug by the plug, not the cord. Pulling on the cord is what causes fraying in the first place.

Keep cords out of walkways and never run them under a mat or a couch leg.

Know where the power cut-off is. In an emergency you switch off at the outlet or breaker before touching anything.

Ground fault protection. Where a treatment room includes a sink in the work area — and Rule 0440-02-.07(2)(a) requires one, with hot and cold running water — receptacles near water should be GFCI-protected.

Safe Water and Towel Temperature

The blueprint lists safe water temperature as its own sub-topic, and PSI's practical requires a demonstrated temperature test in the facial.

Hot towels. The required routine, and the one PSI scores, is: remove the towel, wring the water out , and test the temperature — the conventional demonstration is a test on the inside of your own wrist, one of the most heat-sensitive areas available. Only then does it approach the client's face. Facial skin, especially over the eyelids, burns at temperatures the palms tolerate comfortably.

Always ask the client before the towel lands: "this is going to be warm — tell me immediately if it is too hot." A client under a towel cannot see it coming.

And remember Rule 0440-02-.13(6)(c): a towel previously used for any purpose may not be dipped in hot water and used on a patron. Clean towels come from the electric hot towel cabin required by Rule 0440-02-.07(2)(k).

Steamers. The steam head is positioned roughly 15–18 inches from the face, angled so condensate cannot run into the eyes, ears or nostrils. Use distilled water if the manufacturer directs it; mineral scale from tap water causes the spitting that throws scalding droplets. If a steamer begins to spit, switch it off — that is a burn risk, not a quirk.

Wax. Test wax temperature on your own inner wrist before every client, and again if the pot has been sitting. Thin, honey-like flow at body-comfortable warmth is the target. Sensitive sites — the eye area, the lip, the neck — take a cooler wax than a leg.

Water in the work area. The sink must supply hot and cold running water , so a client or practitioner can flush a chemical splash or cool a burn immediately. Know where it is before you need it.

Equipment Maintenance as a Legal Duty

Tennessee imposes this by rule, in two places:

Rule 0440-02-.07(5)(a): All equipment must be in working order. An inspector who finds a dead steamer or a broken magnifying lamp on the required equipment list has found a violation, because the item is required to be present and functional .

Rule 0440-02-.13(10): All equipment, shampoo basins, furnishings and work surfaces must be kept in good repair, and disinfected after each service.

Read those together: presence, function, repair and disinfection are four separate obligations.

A workable maintenance rhythm

Interval Task

Between clients Disinfect the couch, trolley, lamp arm, steamer housing and any touched surface; empty and reline waste; replace headrest covering

Daily Empty and rinse the steamer reservoir; wipe the wax pot rim and change the collar; sweep or mop floors (Rule 0440-02-.06(2)); check cords and plugs

Weekly Descale the steamer per the manufacturer's instructions; deep-clean the hot towel cabin; check that the first aid kit is stocked

  • Ongoing Log any fault, remove the device from service, and do not return it until repaired
  • Removing a device from service

When something fails, act on it immediately: unplug it, tag it clearly so a colleague cannot pick it up, log the fault with a date, and do not use it until it is repaired or replaced. "It only sparks sometimes" is not a working device.

Physical Safety of the Space

PSI's practical guidance also names keeping the workstation safe from injury, cleaning up spills and picking up dropped items, reducing slip-and-fall or tripping incidents.

Wipe spills the moment they happen; product on a hard floor is genuinely slippery.

Pick up dropped implements immediately, and treat anything that touched the floor as contaminated — clean and disinfect it, or discard it if single-use.

Keep the walkway around the couch clear so you can reach a client from either side.

Wear closed-toe, non-slip shoes.

Ergonomics

Careers in esthetics end from repetitive strain more often than from any dramatic accident. Adjust the couch so you can sit with feet flat and the client's face near your chest level rather than leaning over. Keep the trolley on your dominant side so you are not twisting to reach product. Use a stool with back support. Alternate hands and take micro-breaks during long massage sequences. Position the magnifying lamp so you bring the light to the work, not your spine to the client.