Study guide

9.3 Financial Statements & Ratio Analysis

Tennessee General Contractor Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Tennessee Licensing Law & Board Governance

1.1 Statutory Framework & Board Oversight 1.2 License Classifications & Project Thresholds 1.3 Qualifying Agent Requirements & Responsibilities 1.4 Unlicensed Contracting Penalties & Enforcement

2 Chapter 2: Licensing Finances, Maintenance & Renewals

2.1 Financial Statements, Working Capital & Monetary Limits 2.2 License Application & Board Review Process 2.3 License Renewal, Reinstatement & Maintenance

3 Chapter 3: Tennessee Lien Law: Rights & Pre-Lien Notices

3.1 Prime vs. Remote Contractor Lien Scope 3.2 Pre-Lien Notices & Notice of Nonpayment 3.3 Notice of Lien & Register Filing Procedures

4 Chapter 4: Tennessee Lien Law: Completion, Priority & Waivers

4.1 Notice of Completion & Statutory Expiration 4.2 Lien Enforcement, Foreclosure & Priority 4.3 Lien Waivers & Discharge of Liens

5 Chapter 5: Construction Contract Law & Tennessee Prompt Pay

5.1 Contract Fundamentals & Agreement Types 5.2 Tennessee Prompt Pay Act of 1991 5.3 Retainage Escrow & Statutory Compliance 5.4 Change Orders, Site Conditions & Dispute Resolution

6 Chapter 6: Subcontractor Agreements & Risk Allocation

6.1 Subcontractor Agreements & Flow-Down Provisions 6.2 Payment Contingencies: Pay-When-Paid vs Pay-If-Paid 6.3 Indemnification, Hold Harmless & Liability Limits

7 Chapter 7: Risk Management, Insurance & Surety Bonds

7.1 Commercial General Liability & Builder's Risk 7.2 Workers' Compensation & TN Services Registry 7.3 Surety Bonds: Bid, Performance & Payment Bonds 7.4 Public Works Bonding & Little Miller Act

8 Chapter 8: TOSHA, Safety Standards & Environmental Rules

8.1 TOSHA Regulations & Workplace Inspections 8.2 OSHA Construction Standards: Fall Protection & Excavation 8.3 HAZCOM, PPE & Environmental Permits 8.4 Lead, Asbestos & Hazardous Material Compliance

9 Chapter 9: Business Entities, Construction Accounting & Tax

9.1 Business Organizations & Formation in TN 9.2 Construction Accounting & Recognition Methods 9.3 Financial Statements & Ratio Analysis 9.4 Payroll Accounting, Taxes & Worker Classification

10 Chapter 10: Estimating, Bidding & Project Management

10.1 Estimating Direct/Indirect Costs & Takeoffs 10.2 Bidding Procedures & Public Bidding Laws 10.3 Project Scheduling, CPM & Quality Control 10.4 Building Codes, Closeout & Exam Navigation

9.3 Financial Statements & Ratio Analysis

Key Takeaways Explain This Topic AI

The Balance Sheet reflects financial position at a single point in time based on Assets = Liabilities + Owner's Equity, while the Income Statement measures revenue, costs, overhead, and net profit over an accounting period.

The Tennessee Board for Licensing Contractors evaluates financial strength using Working Capital (Current Assets minus Current Liabilities), applying a strict 10x multiplier to establish monetary license limits.

Key liquidity ratios include the Current Ratio (Current Assets ÷ Current Liabilities; target ≥ 1.5 to 2.0) and the Quick Ratio / Acid-Test Ratio ((Cash + Marketable Securities + Net Receivables) ÷ Current Liabilities, excluding inventory and underbillings).

Debt-to-Equity Ratio (Total Liabilities ÷ Total Owner's Equity) evaluates financial leverage; surety bond underwriters generally prefer a ratio below 2.0 to 3.0 to approve bonding capacity.

Last updated: July 2026

Financial Statements & Ratio Analysis for Contractors

Financial statements provide the essential financial scorecard for a construction business. In Tennessee, financial statement accuracy is not merely an internal management tool—it directly governs a general contractor's Monetary License Limit assigned by the Tennessee Board for Licensing Contractors and determines bonding capacity with surety companies.

  • 1. Core Financial Statements
  • The Balance Sheet

Statistical snapshot of a company's financial condition at a specific point in time (e.g., December 31st). It follows the fundamental accounting equation: Assets = Liabilities + Owner’s Equity \text{Assets} = \text{Liabilities} + \text{Owner's Equity} Assets = Liabilities + Owner’s Equity

Current Assets: Cash and assets expected to be converted into cash within one year (or operating cycle):

  • Cash and Cash Equivalents
  • Trade Accounts Receivable (less allowance for doubtful accounts)
  • Retainage Receivable (withheld by owners, payable upon final completion)
  • Costs and Estimated Earnings in Excess of Billings ( Underbillings )
  • Construction Materials Inventory & Prepaid Expenses

Non-Current / Fixed Assets: Long-term physical assets used in operations:

  • Construction Heavy Equipment, Machinery & Fleet Vehicles (less Accumulated Depreciation)
  • Real Estate, Office Buildings & Land

Current Liabilities: Obligations due to be paid within one year :

  • Accounts Payable (trade suppliers and subcontractors)
  • Retainage Payable (withheld from subs)
  • Billings in Excess of Costs and Estimated Earnings ( Overbillings )
  • Accrued Payroll, Payroll Taxes & Short-Term Bank Notes

Long-Term Liabilities: Obligations extending beyond one year (e.g., long-term equipment mortgages, bank term loans).

Owner's / Stockholders' Equity: Net worth of the business (Contributed Capital + Retained Earnings minus Distributions).

The Income Statement (Profit & Loss)

Measures financial performance over a specific period of time (e.g., fiscal year 2026):

Gross Construction Revenue: Total revenue recognized under PCM/Accrual accounting.

Direct Job Costs (Cost of Goods Sold): Direct project expenses including field labor, materials, subcontractor invoices, equipment fuel/rentals, and job-site permits.

Gross Profit: Gross Revenue − Direct Job Costs \text{Gross Revenue} - \text{Direct Job Costs} Gross Revenue − Direct Job Costs .

General & Administrative (G&A) Overhead: Indirect operating expenses including office staff salaries, executive compensation, office rent, utilities, legal/accounting fees, insurance, and advertising.

Net Operating Income: Gross Profit − G&A Overhead \text{Gross Profit} - \text{G\&A Overhead} Gross Profit − G&A Overhead .

2. Working Capital & Tennessee Licensing Limit (10x Rule)

Working Capital is the single most vital liquid financial metric evaluated by the Tennessee Contractor Licensing Board: Working Capital = Current Assets − Current Liabilities \text{Working Capital} = \text{Current Assets} - \text{Current Liabilities} Working Capital = Current Assets − Current Liabilities

Tennessee Board 10x Multiplier Rule

Under Tennessee licensing regulations, a general contractor's Monetary License Limit (the maximum dollar value of any single construction contract the contractor can bid or perform) is calculated as 10 times Working Capital or 10 times Net Worth , whichever is lower (subject to CPA financial statement review/audit requirements). Maximum Monetary Limit = 10 × Working Capital \text{Maximum Monetary Limit} = 10 \times \text{Working Capital} Maximum Monetary Limit = 10 × Working Capital

Example: If a contractor has $350,000 in Current Assets and $150,000 in Current Liabilities:

Working Capital = $350,000 - $150,000 = $200,000 .

Maximum Monetary Limit = $200,000 × 10 = $2,000,000 .

3. Financial Ratio Analysis

Contractors, lenders, and sureties use key financial ratios to evaluate liquidity, profitability, operational efficiency, and solvency.

Ratio Name Formula Ideal Industry Benchmark Significance to Contractors

Current Ratio Current Assets Current Liabilities \frac{\text{Current Assets}}{\text{Current Liabilities}} Current Liabilities Current Assets ​ 1.5 to 2.0 Measures overall short-term solvency and ability to pay current debts.

Quick Ratio (Acid-Test) Cash + Marketable Securities + Net Receivables Current Liabilities \frac{\text{Cash + Marketable Securities + Net Receivables}}{\text{Current Liabilities}} Current Liabilities Cash + Marketable Securities + Net Receivables ​ 1.0 to 1.5 Strict liquidity test. Excludes inventory, prepaids, and underbillings.

Debt-to-Equity Ratio Total Liabilities Total Owner’s Equity \frac{\text{Total Liabilities}}{\text{Total Owner's Equity}} Total Owner’s Equity Total Liabilities ​ Below 2.0 to 3.0 Evaluates financial leverage and risk of insolvency. High ratio signals over-leveraging.

Return on Assets (ROA) Net Income Total Assets \frac{\text{Net Income}}{\text{Total Assets}} Total Assets Net Income ​ 5% to 10%+ Measures efficiency of asset utilization in generating net earnings.

Gross Profit Margin Gross Profit Gross Revenue \frac{\text{Gross Profit}}{\text{Gross Revenue}} Gross Revenue Gross Profit ​ 15% to 25% Measures job site pricing and direct cost control efficiency.

4. Worked Scenario: Complete Ratio & Limit Analysis

Financial Data: Cumberland Builders Inc. presents the following audited financial figures:

  • Cash: $100,000
  • Trade Accounts & Retainage Receivable: $400,000
  • Underbillings: $50,000
  • Construction Inventory: $50,000
  • Heavy Equipment (Net Book Value): $600,000
  • Accounts Payable & Retainage Payable: $200,000
  • Overbillings: $100,000
  • Long-Term Equipment Loans: $300,000
  • Total Equity: $600,000
  • Step 1: Calculate Current Assets & Current Liabilities

Current Assets = $100k Cash + $400k Receivables + $50k Underbillings + $50k Inventory = $600,000 .

Current Liabilities = $200k Accounts Payable + $100k Overbillings = $300,000 .

Total Assets = $600k Current Assets + $600k Equipment = $1,200,000 .

Total Liabilities = $300k Current Liabilities + $300k Long-Term Debt = $600,000 .

Step 2: Calculate Working Capital & Monetary Limit

Working Capital = $600,000 - $300,000 = $300,000 .

TN License Monetary Limit (10x Rule) = $300,000 × 10 = $3,000,000 .

Step 3: Calculate Liquidity & Solvency Ratios

Current Ratio: $ 600 , 000 $ 300 , 000 = 2.0 \frac{\text{\textdollar}600,000}{\text{\textdollar}300,000} = \mathbf{2.0} $ 300 , 000 $ 600 , 000 ​ = 2.0 (Excellent liquidity).

Quick Ratio: $ 100 , 000 Cash + $ 400 , 000 Receivables $ 300 , 000 = $ 500 , 000 $ 300 , 000 = 1.67 \frac{\text{\textdollar}100,000 \text{ Cash} + \text{\textdollar}400,000 \text{ Receivables}}{\text{\textdollar}300,000} = \frac{\text{\textdollar}500,000}{\text{\textdollar}300,000} = \mathbf{1.67} $ 300 , 000 $ 100 , 000 Cash + $ 400 , 000 Receivables ​ = $ 300 , 000 $ 500 , 000 ​ = 1.67 (Passes strict liquidity test; inventory and underbillings excluded).

Debt-to-Equity Ratio: $ 600 , 000 Total Liabilities $ 600 , 000 Total Equity = 1.0 \frac{\text{\textdollar}600,000 \text{ Total Liabilities}}{\text{\textdollar}600,000 \text{ Total Equity}} = \mathbf{1.0} $ 600 , 000 Total Equity $ 600 , 000 Total Liabilities ​ = 1.0 (Low leverage, highly favorable for bonding).

Loading diagram... Balance Sheet Ratios & Tennessee Licensing Limit Derivation